Study guide
7.5 Hair Color Application Procedures, Mixing and Mineral Precautions
Minnesota Cosmetology License Examination Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Minnesota Licensing, the Board & Scope of Practice
1.1 Minnesota Board of Cosmetology: Purpose, Powers & Key Definitions 1.2 Individual Licenses: Qualifications, Maintenance, Renewal & Continuing Education 1.3 Salon Licenses, Salon Types & the Designated Licensed Salon Manager 1.4 Scope of Practice by License Type & Services Exempt from Licensing 1.5 Licensed Services Outside a Salon: Homebound Permits, Care Facilities & Special Events
2 Chapter 2: Minnesota Practice Requirements, Infection Control & Enforcement
2.1 Inspections, Penalties, Discipline, License Display & Advertising 2.2 Minnesota Infection Control: Hand Washing, Cleaning, Disinfecting, Sterilizing & Storage 2.3 Blood and Body Fluid Exposure, Gloves & First Aid 2.4 Salon Physical and Operational Requirements 2.5 Infection Control for Tools, Stations, Pedicure Tubs, Wax & Single-Use Items 2.6 Salon Prohibitions, Intoxicants & General Practice Requirements
3 Chapter 3: Infection Control Science, Safety Agencies & Adverse Reactions
3.1 Microbiology: Pathogens, Bacteria, Viruses & Fungi 3.2 Decontamination Hierarchy: Cleaning, Disinfection & Sterilization 3.3 OSHA, FDA & EPA: Safety Agencies, Hazard Communication & Safety Data Sheets 3.4 Adverse and Allergic Reactions: Recognition, Patch Tests and Correct Action
4 Chapter 4: Hair & Scalp Science, Shampooing & Scalp Care
4.1 Trichology: Hair Structure, Composition & Growth Cycles 4.2 Hair and Scalp Analysis: Properties, Disorders & Diseases 4.3 Cosmetic Chemistry, the pH Scale & Shampoo and Conditioner Products 4.4 The Shampoo and Conditioning Service: Procedure, Products and Water 4.5 Scalp Care: Analysis, Scalp Massage and Treatments for Scalp Conditions
5 Chapter 5: Haircutting & Hairstyling
5.1 Principles of Hair Design & Facial Shape Analysis 5.2 Haircutting Tools, Angles & Elevation Techniques 5.3 Wet & Thermal Styling Fundamentals 5.4 Haircut Procedures: Blunt, Graduated and Layered Cuts 5.5 Texturizing, Razor and Clipper Cutting Techniques 5.6 Blow-Dry Styling, Combs and Brushes, Dry Styling and Heat Precautions 5.7 Wigs and Hair Additions
6 Chapter 6: Chemical Texture Services
6.1 Chemistry of Permanent Waving & Wrapping Techniques 6.2 Chemical Hair Relaxers & Curl Reforming Systems 6.3 Texture Consultation, Scalp Evaluation & Chemical Safety 6.4 Chemical Straightening, Keratin Smoothing and Texture Service Tests
7 Chapter 7: Hair Coloring & Lightening
7.1 Principles of Color Theory & the Level System 7.2 Hair Coloring Categories & Hydrogen Peroxide Formulations 7.3 Lightening, Decolorizing & Toning Services 7.4 Predisposition Testing, Client Safety & Corrective Color 7.5 Hair Color Application Procedures, Mixing and Mineral Precautions
8 Chapter 8: Skin, Facials, Makeup, Lashes & Hair Removal
8.1 Anatomy & Physiology of the Skin 8.2 Facial Treatments & Massage Manipulations 8.3 Hair Removal Techniques & Safety Contraindications 8.4 Skin Conditions, Disorders and Diseases 8.5 Makeup: Color Theory, Products, Face Shapes and Application 8.6 Eyelashes: Artificial Lashes and Eyelash Extensions
9 Chapter 9: Nail Care, Manicuring & Enhancements
9.1 Anatomy, Growth & Disorders of the Nail 9.2 Manicuring & Pedicuring Procedures and Equipment 9.3 Nail Enhancements: Tips, Liquid/Powder Acrylics & UV/LED Gels
10 Chapter 10: Client Protection, Professional Conduct & PSI Exam Strategy
10.1 Draping Protocols & Client Protection 10.2 Salon Ergonomics, Physical Safety & Professional Ethics 10.3 PSI Examination Logistics, Structure & Test-Taking Strategies 10.4 Client Consultation, Intake Forms, Records and Personal Hygiene
7.5 Hair Color Application Procedures, Mixing and Mineral Precautions
Key Takeaways Explain This Topic AI
Hair is sectioned into four quadrants for most single-process color, applied in 1/4-inch subsections, with the consultation, patch test offer, draping and strand test done first.
To go lighter on virgin hair, permanent color is applied first to the midshaft and ends, starting about 1/2 inch from the scalp, then to the scalp area last because body heat speeds processing there.
To go darker or deposit the same level, color can be applied from scalp to ends in one application, following the manufacturer's directions.
A retouch applies color to new growth only; faded midshafts and ends are refreshed briefly with a demi-permanent or diluted formula, not overlapped with full-strength color.
Hard-water minerals, swimming-pool copper and chlorine, and metallic dyes can alter color results, so clarify or chelate first and test any suspicious hair.
Last updated: October 2026
Why this section matters
Hair coloring is 12% of general theory and 13% of the written practical. The written practical lists color theory and mixing, draping, hair and scalp preparation, sectioning, application and processing, strand test and patch test . Sections 7.1 to 7.4 cover theory, products, lightening and corrective color; this section is the hands-on procedure.
Preparation
Consultation and analysis. Determine natural level, percentage of gray, porosity, texture, density, elasticity, previous color and the target result. Check the scalp for abrasions, irritation or disease.
Patch test. For aniline derivative color, offer and perform the skin test 24 to 48 hours ahead when the manufacturer recommends it (Minn. R. 2105.0375, subp. 7, item F).
Release or record. Write the formula and plan on the client record.
Draping. Towel, chemical cape, towel (Section 10.1); wear gloves .
Hair and scalp preparation. Hair is usually colored dry and unshampooed for permanent color unless the manufacturer directs otherwise. Do not brush or massage the scalp before color. Apply protective cream along the hairline and ears if needed.
Strand test. Apply the mixed formula to a 1/2-inch strand in a less visible area, process for the recommended time, and check the color result, timing and hair condition. Adjust the formula before the full application.
Mixing
Method Use Notes
Applicator bottle Liquid colors, root applications, quick saturation Shake gently to mix; nozzle applies along partings
Bowl and brush Cream colors, precise placement, foils and lighteners Use a nonmetallic bowl and accurate measurements
Measure color and developer exactly with a scale or graduated measuring tools, mix immediately before use, and discard leftover mixed color , which keeps oxidizing and cannot be stored. Use glass or plastic, never metal, bowls and tools.
Sectioning
Divide the hair into four quadrants : a part from the center of the forehead to the nape, and a part from ear to ear over the crown. Apply in 1/4-inch subsections so every strand is saturated.
- Application procedures
- Virgin application: going lighter (single process)
Begin in the most resistant area, often the back or wherever gray is concentrated.
Apply color to the midshaft first , starting about 1/2 inch from the scalp and working out to, but not through, porous ends.
Process as directed, checking with strand tests.
Apply color to the scalp area last, then work it through the ends for the final minutes.
Body heat at the scalp speeds processing, and porous ends grab color, so this order gives even results.
Virgin application: going darker or the same level
Apply from scalp to ends in one application, unless the ends are very porous; porous ends may need a filler or a shorter time to avoid going too dark.
Retouch application
Apply color to the new growth only , up to (not over) the line of demarcation.
Process for the full time.
If the midshaft and ends have faded, refresh them for the last few minutes with a demi-permanent or diluted formula, as the manufacturer directs. Overlapping full-strength permanent color onto previously colored hair builds up color and damages the hair.
Semi-permanent and demi-permanent color
Usually applied to clean, towel-dried hair from scalp to ends, processed for the labeled time, then rinsed. Demi-permanent color is mixed with a low-volume developer.
Processing and removal
Time processing from when application is complete, following the manufacturer.
Check the color with a strand test before rinsing.
To remove, add a little warm water and emulsify at the hairline to lift color from the skin, rinse until the water runs clear, shampoo with a mild or color-safe shampoo, and condition with an acidic conditioner.
Remove stains from the skin with a stain remover. Clean the bowl, brush and bottle, and disinfect tools.
Record the formula, timing and results.
Precautions with minerals and metals
- Source Problem Precaution
- Hard water (calcium, magnesium) Dull film; color takes unevenly Clarifying or chelating shampoo before color
- Iron (well water) Orange or brassy discoloration on light hair Chelating treatment; water filters
Copper and chlorine (pools, plumbing) Green tint on light or porous hair Chelate before color; advise a swim cap and rinsing
Metallic or compound dyes (progressive color restorers, compound henna) React with peroxide and thio: heat, breakage, odd colors 1:20 metallic salts test (Section 6.3); no oxidative color, lightener or perm if positive
Pure henna (from the Lawsonia plant) is an FDA-approved hair color additive, but "compound henna" mixed with metallic salts is not compatible with oxidative color.