Study guide
5.6 Blow-Dry Styling, Combs and Brushes, Dry Styling and Heat Precautions
Minnesota Cosmetology License Examination Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Minnesota Licensing, the Board & Scope of Practice
1.1 Minnesota Board of Cosmetology: Purpose, Powers & Key Definitions 1.2 Individual Licenses: Qualifications, Maintenance, Renewal & Continuing Education 1.3 Salon Licenses, Salon Types & the Designated Licensed Salon Manager 1.4 Scope of Practice by License Type & Services Exempt from Licensing 1.5 Licensed Services Outside a Salon: Homebound Permits, Care Facilities & Special Events
2 Chapter 2: Minnesota Practice Requirements, Infection Control & Enforcement
2.1 Inspections, Penalties, Discipline, License Display & Advertising 2.2 Minnesota Infection Control: Hand Washing, Cleaning, Disinfecting, Sterilizing & Storage 2.3 Blood and Body Fluid Exposure, Gloves & First Aid 2.4 Salon Physical and Operational Requirements 2.5 Infection Control for Tools, Stations, Pedicure Tubs, Wax & Single-Use Items 2.6 Salon Prohibitions, Intoxicants & General Practice Requirements
3 Chapter 3: Infection Control Science, Safety Agencies & Adverse Reactions
3.1 Microbiology: Pathogens, Bacteria, Viruses & Fungi 3.2 Decontamination Hierarchy: Cleaning, Disinfection & Sterilization 3.3 OSHA, FDA & EPA: Safety Agencies, Hazard Communication & Safety Data Sheets 3.4 Adverse and Allergic Reactions: Recognition, Patch Tests and Correct Action
4 Chapter 4: Hair & Scalp Science, Shampooing & Scalp Care
4.1 Trichology: Hair Structure, Composition & Growth Cycles 4.2 Hair and Scalp Analysis: Properties, Disorders & Diseases 4.3 Cosmetic Chemistry, the pH Scale & Shampoo and Conditioner Products 4.4 The Shampoo and Conditioning Service: Procedure, Products and Water 4.5 Scalp Care: Analysis, Scalp Massage and Treatments for Scalp Conditions
5 Chapter 5: Haircutting & Hairstyling
5.1 Principles of Hair Design & Facial Shape Analysis 5.2 Haircutting Tools, Angles & Elevation Techniques 5.3 Wet & Thermal Styling Fundamentals 5.4 Haircut Procedures: Blunt, Graduated and Layered Cuts 5.5 Texturizing, Razor and Clipper Cutting Techniques 5.6 Blow-Dry Styling, Combs and Brushes, Dry Styling and Heat Precautions 5.7 Wigs and Hair Additions
6 Chapter 6: Chemical Texture Services
6.1 Chemistry of Permanent Waving & Wrapping Techniques 6.2 Chemical Hair Relaxers & Curl Reforming Systems 6.3 Texture Consultation, Scalp Evaluation & Chemical Safety 6.4 Chemical Straightening, Keratin Smoothing and Texture Service Tests
7 Chapter 7: Hair Coloring & Lightening
7.1 Principles of Color Theory & the Level System 7.2 Hair Coloring Categories & Hydrogen Peroxide Formulations 7.3 Lightening, Decolorizing & Toning Services 7.4 Predisposition Testing, Client Safety & Corrective Color 7.5 Hair Color Application Procedures, Mixing and Mineral Precautions
8 Chapter 8: Skin, Facials, Makeup, Lashes & Hair Removal
8.1 Anatomy & Physiology of the Skin 8.2 Facial Treatments & Massage Manipulations 8.3 Hair Removal Techniques & Safety Contraindications 8.4 Skin Conditions, Disorders and Diseases 8.5 Makeup: Color Theory, Products, Face Shapes and Application 8.6 Eyelashes: Artificial Lashes and Eyelash Extensions
9 Chapter 9: Nail Care, Manicuring & Enhancements
9.1 Anatomy, Growth & Disorders of the Nail 9.2 Manicuring & Pedicuring Procedures and Equipment 9.3 Nail Enhancements: Tips, Liquid/Powder Acrylics & UV/LED Gels
10 Chapter 10: Client Protection, Professional Conduct & PSI Exam Strategy
10.1 Draping Protocols & Client Protection 10.2 Salon Ergonomics, Physical Safety & Professional Ethics 10.3 PSI Examination Logistics, Structure & Test-Taking Strategies 10.4 Client Consultation, Intake Forms, Records and Personal Hygiene
5.6 Blow-Dry Styling, Combs and Brushes, Dry Styling and Heat Precautions
Key Takeaways Explain This Topic AI
Blow-drying directs airflow from the scalp toward the ends so the cuticle lies flat; a concentrator nozzle focuses air and a diffuser spreads it gently for curly hair.
Round brushes add curl and volume, paddle and cushion brushes smooth and detangle, and vent brushes speed drying and add lift.
Wide-tooth combs detangle wet hair from the ends up, while fine-tooth and tail combs make precise partings and smooth surfaces.
Dry styling includes backcombing (teasing), backbrushing, braiding and updos, which build volume or shape without water or heat.
Use a heat protectant, start with the lowest effective setting, keep tools moving and away from the scalp, and never apply hot irons to wet hair.
Last updated: October 2026
Why this section matters
Hairstyling is 7% of general theory and 10% of the written practical. Section 5.3 covers wet setting, pin curls, rollers and thermal pressing. This section covers the remaining outline topics: blow-dry styling (05.A.1), dry styling (05.A.3), combs and brushes (05.B), temperature precautions (05.C) and written practical 03.A blow-dry styling and 03.D use of tools and implements .
The blow dryer
- Part Purpose
- Heat and speed settings Control drying speed and heat; high speed for rough-drying, lower speed for styling
- Cool shot button Cool air sets the shape after heat
- Air intake and filter Must be kept clean; a clogged intake makes the dryer overheat
- Concentrator nozzle Narrows and directs airflow for smoothing with a brush
- Diffuser Spreads airflow over a wide area so curls dry without frizz
- Blow-dry procedure
Apply a heat protectant and styling product to towel-dried hair and comb through with a wide-tooth comb.
Rough-dry to remove excess moisture, directing air down the hair shaft.
Section the hair (for example, nape, sides, crown and top).
Work section by section from the nape up: place the brush under the subsection at the base, then follow the brush with the nozzle from scalp to ends , keeping the air moving and the nozzle pointed down the shaft.
Lift at the base for volume (hold the section up from the head); keep it close to the head for a sleek finish.
Finish each section with the cool shot to set it, then style.
Directing air from scalp to ends keeps the cuticle flat for shine; blowing up the shaft roughens the cuticle and causes frizz. Holding the dryer too close or in one spot can burn the scalp and damage the hair.
Brushes
- Brush Use
- Round brush (small to large barrel) Curl, bend and volume; smaller barrels make tighter curls
- Paddle brush Smoothing and straightening long hair, large surfaces
- Cushion (classic styling) brush Detangling and smoothing; good for finishing
- Vent brush Openings let air pass for fast drying and lift at the base
- Teasing (backcombing) brush Narrow rows of bristles for backbrushing and smoothing the surface
- Boar-bristle brush Distributes natural oil, adds shine and smooths
- Combs
- Comb Use
- Wide-tooth comb Detangling wet hair and conditioners; start at the ends and work up
- Fine-tooth (styling) comb Smoothing, precise control
- Tail comb Sectioning, subsectioning and parting
- Teasing comb Backcombing
Combs and brushes must be cleaned and fully immersed in disinfectant between clients (Minn. R. 2105.0375, subps. 4 and 10), and tools must never be carried in pockets or aprons (subp. 7, item L).
Dry styling techniques
Backcombing (teasing, ratting): comb short sections from the ends toward the scalp to build a cushion at the base for volume and support.
Backbrushing: similar, with a brush, producing a softer cushion.
Braiding: three-strand, French (inverted), Dutch (visible, the reverse of French), fishtail and rope braids. Avoid excessive tension, which can cause traction alopecia .
Updos (hair up): chignons, twists and ponytail-based styles secured with pins; use backcombing as a foundation and smooth the surface.
Dry styling with irons: flat irons and curling irons are used on dry hair only (Section 5.3).
Braiding basics
Three-strand braid: divide a section into three equal strands and cross the right strand over the center, then the left strand over the new center, repeating to the end.
French (inverted) braid: start with three small strands at the hairline and add a small amount of hair to each outside strand as it crosses over the center, working down the head.
Dutch (visible) braid: the reverse of a French braid: strands cross under the center, so the braid sits on top of the hair.
Fishtail braid: two strands, with a small piece from the outside of one crossed to the other.
Keep partings clean and tension even and moderate, and secure the end with a coated band.
Updo procedure
Consult on the occasion, outfit and desired shape; plan where the volume and focal point will be.
Start with clean, dry hair; prep with a texturizing or holding product and curl or smooth as the style needs.
Section the hair and create a foundation, such as a ponytail, a backcombed cushion or a pin base.
Shape and secure each section with bobby pins and hairpins, crossing pins for hold and hiding them under the hair.
Smooth the surface with a teasing brush, finish with spray, and check the shape from every side.
Temperature precautions
Apply a heat protectant before heat styling.
Start low: fine, lightened, chemically treated or gray hair scorches at lower heat than coarse virgin hair.
Never use flat irons or curling irons on wet hair ; trapped water turns to steam and damages the hair.
Keep irons and dryer nozzles moving and away from the scalp ; place a comb between a hot iron and the scalp.
Test non-adjustable irons and pressing combs on a white tissue or end paper before use.
Synthetic hair and many wigs melt under normal styling heat unless labeled heat-resistant.
Keep cords off wet floors, unplug tools when not in use, and store them safely after cleaning and disinfecting (Minn. R. 2105.0375, subp. 11).