Study guide
5.4 Haircut Procedures: Blunt, Graduated and Layered Cuts
Minnesota Cosmetology License Examination Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Minnesota Licensing, the Board & Scope of Practice
1.1 Minnesota Board of Cosmetology: Purpose, Powers & Key Definitions 1.2 Individual Licenses: Qualifications, Maintenance, Renewal & Continuing Education 1.3 Salon Licenses, Salon Types & the Designated Licensed Salon Manager 1.4 Scope of Practice by License Type & Services Exempt from Licensing 1.5 Licensed Services Outside a Salon: Homebound Permits, Care Facilities & Special Events
2 Chapter 2: Minnesota Practice Requirements, Infection Control & Enforcement
2.1 Inspections, Penalties, Discipline, License Display & Advertising 2.2 Minnesota Infection Control: Hand Washing, Cleaning, Disinfecting, Sterilizing & Storage 2.3 Blood and Body Fluid Exposure, Gloves & First Aid 2.4 Salon Physical and Operational Requirements 2.5 Infection Control for Tools, Stations, Pedicure Tubs, Wax & Single-Use Items 2.6 Salon Prohibitions, Intoxicants & General Practice Requirements
3 Chapter 3: Infection Control Science, Safety Agencies & Adverse Reactions
3.1 Microbiology: Pathogens, Bacteria, Viruses & Fungi 3.2 Decontamination Hierarchy: Cleaning, Disinfection & Sterilization 3.3 OSHA, FDA & EPA: Safety Agencies, Hazard Communication & Safety Data Sheets 3.4 Adverse and Allergic Reactions: Recognition, Patch Tests and Correct Action
4 Chapter 4: Hair & Scalp Science, Shampooing & Scalp Care
4.1 Trichology: Hair Structure, Composition & Growth Cycles 4.2 Hair and Scalp Analysis: Properties, Disorders & Diseases 4.3 Cosmetic Chemistry, the pH Scale & Shampoo and Conditioner Products 4.4 The Shampoo and Conditioning Service: Procedure, Products and Water 4.5 Scalp Care: Analysis, Scalp Massage and Treatments for Scalp Conditions
5 Chapter 5: Haircutting & Hairstyling
5.1 Principles of Hair Design & Facial Shape Analysis 5.2 Haircutting Tools, Angles & Elevation Techniques 5.3 Wet & Thermal Styling Fundamentals 5.4 Haircut Procedures: Blunt, Graduated and Layered Cuts 5.5 Texturizing, Razor and Clipper Cutting Techniques 5.6 Blow-Dry Styling, Combs and Brushes, Dry Styling and Heat Precautions 5.7 Wigs and Hair Additions
6 Chapter 6: Chemical Texture Services
6.1 Chemistry of Permanent Waving & Wrapping Techniques 6.2 Chemical Hair Relaxers & Curl Reforming Systems 6.3 Texture Consultation, Scalp Evaluation & Chemical Safety 6.4 Chemical Straightening, Keratin Smoothing and Texture Service Tests
7 Chapter 7: Hair Coloring & Lightening
7.1 Principles of Color Theory & the Level System 7.2 Hair Coloring Categories & Hydrogen Peroxide Formulations 7.3 Lightening, Decolorizing & Toning Services 7.4 Predisposition Testing, Client Safety & Corrective Color 7.5 Hair Color Application Procedures, Mixing and Mineral Precautions
8 Chapter 8: Skin, Facials, Makeup, Lashes & Hair Removal
8.1 Anatomy & Physiology of the Skin 8.2 Facial Treatments & Massage Manipulations 8.3 Hair Removal Techniques & Safety Contraindications 8.4 Skin Conditions, Disorders and Diseases 8.5 Makeup: Color Theory, Products, Face Shapes and Application 8.6 Eyelashes: Artificial Lashes and Eyelash Extensions
9 Chapter 9: Nail Care, Manicuring & Enhancements
9.1 Anatomy, Growth & Disorders of the Nail 9.2 Manicuring & Pedicuring Procedures and Equipment 9.3 Nail Enhancements: Tips, Liquid/Powder Acrylics & UV/LED Gels
10 Chapter 10: Client Protection, Professional Conduct & PSI Exam Strategy
10.1 Draping Protocols & Client Protection 10.2 Salon Ergonomics, Physical Safety & Professional Ethics 10.3 PSI Examination Logistics, Structure & Test-Taking Strategies 10.4 Client Consultation, Intake Forms, Records and Personal Hygiene
5.4 Haircut Procedures: Blunt, Graduated and Layered Cuts
Key Takeaways Explain This Topic AI
A blunt (one-length) cut is cut at 0 degrees elevation with a stationary guideline at the perimeter, producing maximum weight at the hemline.
A graduated cut uses low to medium elevation, classically 45 degrees, to stack weight and create a visible weight line above the perimeter.
A uniform layered cut is cut at 90 degrees from the curve of the head with a traveling guideline, so all lengths are equal and there is no weight line.
A long-layered cut is cut at 180 degrees, giving short layers at the top and long layers at the perimeter.
Every haircut starts with consultation, analysis and draping, and finishes with cross-checking in the opposite direction from the partings used to cut.
Last updated: October 2026
Why this section matters
The general theory outline lists the types of haircuts ( blunt, graduated, layered ), guidelines and sectioning ; the written practical lists draping, sectioning, guidelines, cutting angles and tool use. Procedure-order and "which cut produces this result" questions are common.
Before the cut
Consultation. Discuss lifestyle, styling time, desired length and shape, and look at photos together. Analyze face shape (Section 5.1), head shape, hairline, growth patterns (cowlicks, whorls), density , texture , wave pattern and elasticity .
Draping. Neck strip, then cutting cape, with the neck strip folded over the cape so the cape does not touch the skin (Section 10.1). Use a towel and waterproof cape if the hair will be shampooed first.
Shampoo or wet the hair as the cut requires. Most precision cuts are done on damp hair; some textured or curly cuts are done dry.
Section. A common pattern is four or five sections using the apex, parietal ridge and occipital bone as landmarks. Clip sections neatly; clean, consistent partings make clean guidelines.
Key terms
Guideline (guide): the section that sets the length for the cut. A stationary guide stays in place and all hair is brought to it; a traveling guide moves through the cut, each new subsection including a little hair from the previous one.
Elevation (projection): the angle at which hair is held from the head while cutting.
Overdirection: combing hair away from its natural fall position toward a guide to create length increases.
Cutting line: the angle of the fingers and shears in relation to the floor or partings (horizontal, vertical, diagonal).
Tension: the amount of pressure on the hair while combing and holding; use minimal tension on curly hair, around the ears and on the hairline.
Weight line: the visual line at the heaviest perimeter area.
The four basic haircuts
Haircut Elevation Guideline Result
Blunt (one-length) 0° (hair combed to natural fall) Stationary, at the perimeter All hair falls to one level; strongest weight line at the hemline
Graduated Low to medium, classically 45° Usually stationary or traveling at the perimeter Stacked, wedge-like shape with weight built above the perimeter
Uniform layered 90° from the curve of the head Traveling, at the interior Same length all over; no weight line; follows the head shape
Long layered 180° (hair held straight up) Stationary at the top Short interior, long perimeter; volume and movement on top
Blunt (one-length) cut
Part the hair into sections and take a horizontal or slightly diagonal parting at the nape .
Comb the first subsection straight down with minimal tension and cut the perimeter guideline at 0 degrees , holding the hair against the skin or between the fingers without lifting.
Release the next subsection, comb it down to the guideline and cut to the same length. Continue up the back, then the sides, matching each side to the back.
Check that both sides are even in the mirror and from behind. Watch for the ears: let the hair fall over them naturally and do not push it, or the line will jump.
Graduated cut
Establish the perimeter guide at the nape.
Take subsections parallel to the desired line and elevate each one, usually 45 degrees , cutting to the guide. Weight builds where the ends stack.
Higher elevation or a steeper cutting line raises the weight line; lower elevation keeps it close to the perimeter.
Cross-check with partings opposite to those used to cut.
Uniform layered cut
Cut an interior guide at the top (for example, from the front hairline to the crown) to the chosen length.
Take subsections perpendicular to the curve of the head and hold each at 90 degrees from the head, cutting parallel to the curve.
Use a traveling guide around the head so every section matches the one before.
Blend the interior guide into the perimeter and cross-check.
Long-layered cut
Establish a guide at the top of the head.
Bring hair from each area straight up to 180 degrees to the stationary guide and cut.
Hair farther from the top travels farther, so the perimeter stays long while the top is shorter.
Finish the perimeter shape separately if needed.
Cutting curly and textured hair
Curly hair can shrink by a large fraction of its stretched length when it dries, so:
Leave extra length and use minimal tension ; avoid stretching curls when holding them.
Many stylists cut curly hair dry or partly dry so they see where each curl sits.
Avoid razor cutting on very curly hair, which can cause frizz.
Check the shape after drying and refine.
Cross-checking and finishing
Cross-checking means parting the haircut in the opposite direction from the one used to cut it (horizontal partings for a cut done with vertical partings, and the reverse) and checking for precise lines. Remove only stray ends; do not change the established guide. Check balance in the mirror, blow-dry the style, and refine the perimeter and any texturizing once dry. Finally, remove the cape carefully toward the client's back, discard the neck strip, sweep up hair immediately, and clean and disinfect the shears with a hospital-level spray or wipe (Minn. R. 2105.0375, subps. 9 and 15).