Study guide

5.5 Texturizing, Razor and Clipper Cutting Techniques

Minnesota Cosmetology License Examination Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Minnesota Licensing, the Board & Scope of Practice

1.1 Minnesota Board of Cosmetology: Purpose, Powers & Key Definitions 1.2 Individual Licenses: Qualifications, Maintenance, Renewal & Continuing Education 1.3 Salon Licenses, Salon Types & the Designated Licensed Salon Manager 1.4 Scope of Practice by License Type & Services Exempt from Licensing 1.5 Licensed Services Outside a Salon: Homebound Permits, Care Facilities & Special Events

2 Chapter 2: Minnesota Practice Requirements, Infection Control & Enforcement

2.1 Inspections, Penalties, Discipline, License Display & Advertising 2.2 Minnesota Infection Control: Hand Washing, Cleaning, Disinfecting, Sterilizing & Storage 2.3 Blood and Body Fluid Exposure, Gloves & First Aid 2.4 Salon Physical and Operational Requirements 2.5 Infection Control for Tools, Stations, Pedicure Tubs, Wax & Single-Use Items 2.6 Salon Prohibitions, Intoxicants & General Practice Requirements

3 Chapter 3: Infection Control Science, Safety Agencies & Adverse Reactions

3.1 Microbiology: Pathogens, Bacteria, Viruses & Fungi 3.2 Decontamination Hierarchy: Cleaning, Disinfection & Sterilization 3.3 OSHA, FDA & EPA: Safety Agencies, Hazard Communication & Safety Data Sheets 3.4 Adverse and Allergic Reactions: Recognition, Patch Tests and Correct Action

4 Chapter 4: Hair & Scalp Science, Shampooing & Scalp Care

4.1 Trichology: Hair Structure, Composition & Growth Cycles 4.2 Hair and Scalp Analysis: Properties, Disorders & Diseases 4.3 Cosmetic Chemistry, the pH Scale & Shampoo and Conditioner Products 4.4 The Shampoo and Conditioning Service: Procedure, Products and Water 4.5 Scalp Care: Analysis, Scalp Massage and Treatments for Scalp Conditions

5 Chapter 5: Haircutting & Hairstyling

5.1 Principles of Hair Design & Facial Shape Analysis 5.2 Haircutting Tools, Angles & Elevation Techniques 5.3 Wet & Thermal Styling Fundamentals 5.4 Haircut Procedures: Blunt, Graduated and Layered Cuts 5.5 Texturizing, Razor and Clipper Cutting Techniques 5.6 Blow-Dry Styling, Combs and Brushes, Dry Styling and Heat Precautions 5.7 Wigs and Hair Additions

6 Chapter 6: Chemical Texture Services

6.1 Chemistry of Permanent Waving & Wrapping Techniques 6.2 Chemical Hair Relaxers & Curl Reforming Systems 6.3 Texture Consultation, Scalp Evaluation & Chemical Safety 6.4 Chemical Straightening, Keratin Smoothing and Texture Service Tests

7 Chapter 7: Hair Coloring & Lightening

7.1 Principles of Color Theory & the Level System 7.2 Hair Coloring Categories & Hydrogen Peroxide Formulations 7.3 Lightening, Decolorizing & Toning Services 7.4 Predisposition Testing, Client Safety & Corrective Color 7.5 Hair Color Application Procedures, Mixing and Mineral Precautions

8 Chapter 8: Skin, Facials, Makeup, Lashes & Hair Removal

8.1 Anatomy & Physiology of the Skin 8.2 Facial Treatments & Massage Manipulations 8.3 Hair Removal Techniques & Safety Contraindications 8.4 Skin Conditions, Disorders and Diseases 8.5 Makeup: Color Theory, Products, Face Shapes and Application 8.6 Eyelashes: Artificial Lashes and Eyelash Extensions

9 Chapter 9: Nail Care, Manicuring & Enhancements

9.1 Anatomy, Growth & Disorders of the Nail 9.2 Manicuring & Pedicuring Procedures and Equipment 9.3 Nail Enhancements: Tips, Liquid/Powder Acrylics & UV/LED Gels

10 Chapter 10: Client Protection, Professional Conduct & PSI Exam Strategy

10.1 Draping Protocols & Client Protection 10.2 Salon Ergonomics, Physical Safety & Professional Ethics 10.3 PSI Examination Logistics, Structure & Test-Taking Strategies 10.4 Client Consultation, Intake Forms, Records and Personal Hygiene

5.5 Texturizing, Razor and Clipper Cutting Techniques

Key Takeaways Explain This Topic AI

Texturizing removes bulk or adds movement without changing the overall length; common techniques are point cutting, notching, slithering (effilating), slicing, carving and thinning-shear work.

Razor cutting is done on wet or damp hair with a guarded razor and produces soft, tapered ends, but it can cause frizz on very curly or coarse hair.

Clipper-over-comb tapers hair close to the head, and attachment guards set a uniform length; a number 1 guard leaves about 1/8 inch and a number 4 about 1/2 inch.

Fades and tapers move from short at the nape and sides to longer at the top, blending each guard length into the next.

In Minnesota, removable clipper blades and guards are cleaned and disinfected after each use, and non-detachable blades are brushed and sprayed with a hospital-level disinfectant (Minn. R. 2105.0375, subp. 11).

Last updated: October 2026

Why this section matters

General theory topics 06.D to 06.G cover texturizing techniques, using a razor, using clippers and using scissors or shears , and the written practical asks about using haircutting tools (shears, razor) . Questions usually describe a desired effect and ask which technique produces it, or test safety rules for razors and clippers.

Texturizing

Texturizing removes bulk, softens lines or adds movement inside a shape without changing its overall length.

Technique How it is done Effect

Point cutting Cut into the ends with the tips of the shears, held vertically or at an angle Softens a hard line; creates a broken, textured edge

Notching Larger, deeper cuts into the ends, farther apart than point cutting Chunkier texture and separation

Slithering (effilating) Open shears slightly and slide them along the strand, closing a little as you move Thins and tapers with movement; removes weight along the length

Slicing Partly open shears glide through the surface of the hair Removes bulk and adds movement while keeping length; done on the surface or interior

Carving Shears glide through a section of hair placed against the head Creates visual separation in short haircuts

Thinning (texturizing) shears Notched blade or blades remove a percentage of hair with each closure Reduces density; the number of teeth determines how much is removed

Freehand notching Snipping pieces out at intervals with the shear tips Texture and separation at the ends

Cautions: remove bulk gradually, avoid thinning near the part line or hairline where short hairs stick up, and be conservative on fine or curly hair.

Razor cutting

Always cut damp or wet hair. A razor on dry hair pulls and frays the cuticle and is uncomfortable for the client.

Use a guarded razor with a new, sharp blade ; a dull blade tears hair.

Hold the razor at a low angle (nearly parallel to the strand) for soft taper and blending, and at a higher angle for more removal.

Razor-over-comb blends and tapers short areas; razor rotation gives soft, textured effects.

Avoid razor cutting on very curly, coarse or frizz-prone hair.

Used blades are disposed of in a sharps container . Minnesota requires razors to be wiped clean and disinfected with a hospital-level spray or wipe after each use (Minn. R. 2105.0375, subp. 9). Minnesota scope includes using a razor to remove hair from the head, face and neck (Minn. R. 2105.0105, subp. 1).

  • Clipper cutting
  • Tools

Clippers have a stationary blade and a moving blade; the cutting length is changed with the adjustable blade lever or attachment guards .

Trimmers (edgers) are smaller with a fine blade for outlining hairlines, around the ears and the neck.

  • Guard number Approximate length left
  • 1 1/8 inch
  • 2 1/4 inch
  • 3 3/8 inch
  • 4 1/2 inch
  • Techniques

Clipper-over-comb: the comb lifts and holds the hair at an angle, and the clipper glides across the comb teeth. Moving the comb away from the head leaves more length; working close to the head tapers shorter.

Freehand with guards: cut against the direction of growth with a guard to leave a uniform length.

Tapers and fades: the hair grades from very short at the nape and sides to longer at the crown and top. Use progressively longer guards (or open the lever) as you move up, and blend the line between lengths with clipper-over-comb or the blade's corner.

Outlining: trimmers clean the perimeter around the ears and the nape. Work carefully on the skin and follow the natural hairline.

Safety and infection control (Minn. R. 2105.0375, subp. 11)

Keep the client's ear folded down and protected when tapering near it.

Remove plastic guards and other nonmetal removable parts after each use; clean them and immerse them in disinfectant.

Remove detachable metal blades , brush or wipe off hair and debris, and disinfect them with a hospital-level spray or wipe for the label contact time.

For non-detachable blades , remove hair with a disinfected brush or blade wash, then spray with a hospital-level disinfectant.

Brush or wipe the clipper body, handle and cord, then disinfect them; store on a clean, disinfected surface, stand or hook, or in a closed container.

Shears and thinning shears

Hold shears with the thumb in the thumb grip and the ring finger in the finger grip, moving only the thumb blade; palm the shears while combing. Thinning shears remove a percentage of hair, and the more teeth they have, the finer the result. After each use, wipe off hair and product and disinfect with a hospital-level spray or wipe (Minn. R. 2105.0375, subp. 9).

Loading diagram... Matching technique to result