Study guide
1.1 Scope of Practice, License Types & DLI Administration
Minnesota General Contractor Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Minnesota Licensing Statutes & DLI Regulatory Framework
1.1 Scope of Practice, License Types & DLI Administration 1.2 Qualifying Person Requirements & Continuing Education 1.3 Exemptions, Prohibited Acts & DLI Enforcement
2 Chapter 2: Minnesota Contract Law & Statutory Home Warranties
2.1 Essential Terms of Construction Contracts & Change Orders 2.2 Statutory Warranties under Minn. Stat. Chapter 327A 2.3 Insurance Deductible Rebates & Contractor Recovery Fund
3 Chapter 3: Minnesota Mechanics Lien Law (Minn. Stat. Chapter 514)
Section 3.1: Pre-Lien Notice Requirements for Prime & Subcontractors Section 3.2: Recording Mechanics Liens & The 120-Day Filing Deadline Section 3.3: Foreclosure Actions, Priority & Lien Waivers
4 Chapter 4: Business Management, Accounting & Taxes
4.1 Financial Statements, Cash vs. Accrual Accounting & Cash Flow 4.2 Minnesota Business Structures, State Taxes & Capital Improvements 4.3 Payroll Management, Prevailing Wage & Employer Tax Obligations
5 Chapter 5: Risk Management, Insurance & Surety Bonds
Section 5.1: Commercial General Liability & Workers' Compensation Insurance Section 5.2: Surety Bonds vs. Insurance (Bid, Performance & Payment Bonds) Section 5.3: Risk Assessment, Subcontractor Certificates & Indemnification
6 Chapter 6: Jobsite Safety & Minnesota OSHA Compliance
6.1 MN OSHA Regulations, Inspections & Employer Rights 6.2 Fall Protection, Scaffolding & Personal Protective Equipment 6.3 Trenching, Excavation, Hazard Communication & Silica Standards
7 Chapter 7: Minnesota State Building Code Administration & Permits
7.1 MN Rules Chapter 1300 (Administration, Permits & Plan Review) 7.2 Building Inspections, Code Violations & Certificates of Occupancy 7.4 Building Planning: Means of Egress, Stairways, Exit Doors & Garage Separation 7.5 Life Safety: Smoke Alarms, Safety Glazing, Natural Light, Ceiling Heights & Replacement Windows 7.3 Site Preparation, Surveying & Soil Bearing Capacity
8 Chapter 8: Foundations, Footings, Concrete & Masonry
8.1 Frost Depth Requirements, Soils & Footing Design 8.2 Foundation Wall Systems, Waterproofing & Damp-Proofing 8.3 Concrete Specifications, Reinforcement & Cold-Weather Concreting
9 Chapter 9: Wood Framing, Structural Systems & Load Requirements
9.1 Floor Systems, Girders & Joist Spanning 9.2 Wall Framing, Shear Walls & Structural Headers 9.3 Roof Framing, Trusses, Snow Load & Wind Load Design 9.4 Decks, Balconies, Stairs, Decay Protection & Wood Foundations
10 Chapter 10: Building Enclosure, Energy Code & Environmental Systems
10.1 Roofing Underlayment, Ice Dam Protection & Flashing Details 10.2 Insulation (R-Values), Vapor Retarders & MN Energy Code (Chapter 1322) 10.3 Radon Control Measures (Chapter 1303) & Indoor Air Quality 10.4 Exterior Finishes: House Wrap, Flashing, Siding, Stucco & Brick Veneer 10.5 Foam Plastic Insulation & Interior Finishes (Drywall) 10.6 Roof Covering Materials: Asphalt, Rolled Roofing & Wood Shingles/Shakes 10.7 Associated Issues: Electrical & Plumbing Awareness for Builders
1.1 Scope of Practice, License Types & DLI Administration
Key Takeaways Explain This Topic AI
The Minnesota Department of Labor and Industry (DLI) Construction Codes and Licensing Division (CCLD) regulates residential contracting under Minn. Stat. § 326B.805.
State residential licensing applies strictly to constructing or improving residential real estate containing 1 to 4 family dwelling units.
Minnesota offers three distinct residential license classifications: Residential Building Contractor (QBC), Residential Remodeler (QBR), and Residential Roofer (QBRR).
Minnesota does not issue a statewide general commercial building contractor license; commercial construction is governed by local municipal licensing and building permits.
Residential contractor licenses are issued on a two-year cycle expiring on March 31 of the renewal year, requiring a $150 examination fee for the Qualifying Person.
Last updated: July 2026
Scope of Practice, License Types & DLI Administration
In the State of Minnesota, the construction industry is governed by a statutory framework designed to protect property owners, uphold structural integrity, and ensure financial accountability across residential building trades. Understanding the administrative structure, license classifications, and statutory boundaries established under Minnesota Statutes is essential for candidates preparing for the Minnesota Residential Building Contractor examination.
1. Regulatory Body: DLI & CCLD Oversight
The primary state administrative agency overseeing contractor licensing and building code enforcement in Minnesota is the Department of Labor and Industry (DLI) . Within the DLI, the Construction Codes and Licensing Division (CCLD) directly manages license applications, qualifying person examinations, continuing education compliance, enforcement actions, and code administration.
Core Responsibilities of the CCLD
License Administration : Processing original and renewal applications for residential contractors, remodelers, roofers, manufactured home installers, plumbers, electricians, and high-pressure piping trades.
Enforcement & Oversight : Investigating consumer complaints, conducting jobsite inspections, issuing administrative administrative orders, and penalizing unlicensed activity.
Building Code Management : Adopting and updating the Minnesota State Building Code, including structural codes, energy codes, accessibility standards, and mechanical codes.
Contractor Recovery Fund Management : Administering the state fund established under Minn. Stat. § 326B.89 to compensate consumers who sustain financial losses due to licensed contractor misconduct. ┌─────────────────────────────────────────────────────────────────────────┐
- │ MINNESOTA DEPARTMENT OF LABOR AND INDUSTRY (DLI) │
- ├─────────────────────────────────────────────────────────────────────────┤
- │ Construction Codes and Licensing Division (CCLD) │
- │ │
- │ ┌───────────────────────────────┐ ┌──────────────────────────────┐ │
- │ │ Residential Contractor │ │ Building Code & Enforcement │ │
- │ │ Licensing & Examination │ │ Compliance Unit │ │
- │ └───────────────┬───────────────┘ └──────────────┬───────────────┘ │
- │ │ │ │
- │ ▼ ▼ │
- │ QBC / QBR / QBRR Licenses Stop-Work Orders & Fines │
- └─────────────────────────────────────────────────────────────────────────┘
- 2. Statutory Scope of Practice under Minn. Stat. § 326B.805
Under Minn. Stat. § 326B.805 , any individual or business entity that contracts directly with an owner to construct, repair, alter, remodel, improve, or demolish residential real estate with the intent to build or improve one to four family residential units must hold an active state residential license issued by the DLI.
Key Definition: Residential Real Estate (1 to 4 Units)
The statutory threshold defining state residential licensing jurisdiction is strictly 1 to 4 family residential units . This includes:
Single-family detached homes.
Two-family duplex structures.
Three-family triplex structures.
Four-family quadraplex structures, townhomes, and residential condominiums (where individual units fall under 1-4 unit residential building code provisions).
If a building project exceeds 4 residential units (e.g., a 5-unit apartment building or a multi-story commercial complex), it falls outside the statutory scope of state residential contractor licensing and is governed by commercial building code regulations.
Exam Tip: Remember the statutory boundary: 1 to 4 family dwelling units . Any question asking whether a 3-unit triplex or 4-unit townhome requires a state residential contractor license is answered YES . A 10-unit apartment building falls under commercial regulations, not state residential contractor licensing.
3. License Classification Breakdown
Minnesota establishes three distinct license classifications for residential contracting businesses. Every licensed contracting business must designate a Qualifying Person (QP) who takes and passes the state examination corresponding to the firm's license type.
License Classification Code Identifier Scope of Authorized Work Examination & QP Requirement
Residential Building Contractor QBC Authorized to construct new residential structures (1-4 units) from the ground up, as well as perform additions, structural alterations, remodeling, roofing, and repairs. Holds unlimited residential scope. Must pass the Minnesota Residential Building Contractor QP exam ($150 exam fee).
Residential Remodeler QBR Authorized to perform structural alterations, improvements, additions, repairs, and roofing on existing residential structures (1-4 units). Cannot build new single-family or multi-family homes from the ground up. Must pass the Minnesota Residential Remodeler QP exam ($150 exam fee).
Residential Roofer QBRR Scope of work is limited strictly to roofing installation, repair, maintenance, and replacement on residential real estate (1-4 units), including associated structural deck repairs directly related to roofing. Must pass the Minnesota Residential Roofer QP exam ($150 exam fee).
Primary Distinction: QBC vs. QBR
The fundamental boundary between a Residential Building Contractor (QBC) and a Residential Remodeler (QBR) hinges on new ground-up construction :
A QBC can build a brand-new custom home on a vacant lot or demolish an existing structure and build new.
A QBR is strictly restricted to existing residential structures. If a property owner requests a brand-new home build from scratch, a QBR cannot legally contract for or perform that work unless they obtain a QBC license.
4. State Residential Licensing vs. Commercial Regulation
A critical distinction tested on the Minnesota licensing exam is how Minnesota regulates commercial general contractors versus residential contractors .
Does Minnesota Have a Statewide Commercial General Contractor License?
NO. Unlike states that issue broad Class A or Class B commercial licenses, Minnesota does not issue a statewide general commercial building contractor license. The DLI's general contractor licensing program applies exclusively to residential construction (1-4 units) .
How Commercial Contracting is Regulated in Minnesota
Commercial general contractors operating in Minnesota are subject to a decentralized regulatory system:
Local Municipal Licensing : Cities such as Minneapolis, St. Paul, Rochester, and Duluth enforce their own municipal commercial contractor registration or licensing ordinances.
State Specialty Trade Licensing : Subcontractors performing mechanical, electrical, plumbing, boiler, or elevator work on commercial projects must hold individual state specialty trade licenses from the DLI (e.g., Master Electrician, Master Plumber).
Local Building Permits & Commercial Codes : Commercial construction is enforced locally by municipal certified building officials using the Minnesota Commercial Building Code (which adopts the International Building Code with state amendments).
5. Fees, Financial Requirements & License Renewal Schedules
To obtain and maintain an active license, contractors must satisfy state fee schedules and adhere to mandatory renewal deadlines established by the DLI.
Fee Structure & Licensing Costs
Qualifying Person Examination Fee : $150 paid directly for scheduling and taking the state written examination.
Initial Application & License Fees : License fees are scaled based on the applicant's projected or actual annual gross receipts from residential contracting:
Under $1,000,000 gross receipts : Base license fee plus mandatory assessment for the Contractor Recovery Fund.
$1,000,000 to $5,000,000 gross receipts : Higher tier license fee and Recovery Fund assessment.
Over $5,000,000 gross receipts : Maximum tier license fee and Recovery Fund assessment.
Contractor Recovery Fund Fee : A statutory surcharge collected with initial and renewal fees under Minn. Stat. § 326B.89 to maintain the state fund compensating aggrieved consumers.
License Renewal Cycle & Expiration Date
Two-Year License Period : All Minnesota residential contractor, remodeler, and roofer licenses are valid for a two-year period (biennial renewal).
Mandatory Expiration Date : All licenses expire on March 31 of the expiration year.
Renewal Deadline : Renewal applications, required fees, proof of active business filing, active liability insurance, workers' compensation compliance, and proof of 14 hours of continuing education for the QP must post to the DLI prior to March 31 to prevent license expiration.