Study guide
4.1 Financial Statements, Cash vs. Accrual Accounting & Cash Flow
Minnesota General Contractor Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Minnesota Licensing Statutes & DLI Regulatory Framework
1.1 Scope of Practice, License Types & DLI Administration 1.2 Qualifying Person Requirements & Continuing Education 1.3 Exemptions, Prohibited Acts & DLI Enforcement
2 Chapter 2: Minnesota Contract Law & Statutory Home Warranties
2.1 Essential Terms of Construction Contracts & Change Orders 2.2 Statutory Warranties under Minn. Stat. Chapter 327A 2.3 Insurance Deductible Rebates & Contractor Recovery Fund
3 Chapter 3: Minnesota Mechanics Lien Law (Minn. Stat. Chapter 514)
Section 3.1: Pre-Lien Notice Requirements for Prime & Subcontractors Section 3.2: Recording Mechanics Liens & The 120-Day Filing Deadline Section 3.3: Foreclosure Actions, Priority & Lien Waivers
4 Chapter 4: Business Management, Accounting & Taxes
4.1 Financial Statements, Cash vs. Accrual Accounting & Cash Flow 4.2 Minnesota Business Structures, State Taxes & Capital Improvements 4.3 Payroll Management, Prevailing Wage & Employer Tax Obligations
5 Chapter 5: Risk Management, Insurance & Surety Bonds
Section 5.1: Commercial General Liability & Workers' Compensation Insurance Section 5.2: Surety Bonds vs. Insurance (Bid, Performance & Payment Bonds) Section 5.3: Risk Assessment, Subcontractor Certificates & Indemnification
6 Chapter 6: Jobsite Safety & Minnesota OSHA Compliance
6.1 MN OSHA Regulations, Inspections & Employer Rights 6.2 Fall Protection, Scaffolding & Personal Protective Equipment 6.3 Trenching, Excavation, Hazard Communication & Silica Standards
7 Chapter 7: Minnesota State Building Code Administration & Permits
7.1 MN Rules Chapter 1300 (Administration, Permits & Plan Review) 7.2 Building Inspections, Code Violations & Certificates of Occupancy 7.4 Building Planning: Means of Egress, Stairways, Exit Doors & Garage Separation 7.5 Life Safety: Smoke Alarms, Safety Glazing, Natural Light, Ceiling Heights & Replacement Windows 7.3 Site Preparation, Surveying & Soil Bearing Capacity
8 Chapter 8: Foundations, Footings, Concrete & Masonry
8.1 Frost Depth Requirements, Soils & Footing Design 8.2 Foundation Wall Systems, Waterproofing & Damp-Proofing 8.3 Concrete Specifications, Reinforcement & Cold-Weather Concreting
9 Chapter 9: Wood Framing, Structural Systems & Load Requirements
9.1 Floor Systems, Girders & Joist Spanning 9.2 Wall Framing, Shear Walls & Structural Headers 9.3 Roof Framing, Trusses, Snow Load & Wind Load Design 9.4 Decks, Balconies, Stairs, Decay Protection & Wood Foundations
10 Chapter 10: Building Enclosure, Energy Code & Environmental Systems
10.1 Roofing Underlayment, Ice Dam Protection & Flashing Details 10.2 Insulation (R-Values), Vapor Retarders & MN Energy Code (Chapter 1322) 10.3 Radon Control Measures (Chapter 1303) & Indoor Air Quality 10.4 Exterior Finishes: House Wrap, Flashing, Siding, Stucco & Brick Veneer 10.5 Foam Plastic Insulation & Interior Finishes (Drywall) 10.6 Roof Covering Materials: Asphalt, Rolled Roofing & Wood Shingles/Shakes 10.7 Associated Issues: Electrical & Plumbing Awareness for Builders
4.1 Financial Statements, Cash vs. Accrual Accounting & Cash Flow
Key Takeaways Explain This Topic AI
The Balance Sheet follows the fundamental accounting equation: Assets = Liabilities + Owner's Equity, representing a contractor's financial standing at a single point in time.
Under Generally Accepted Accounting Principles (GAAP), long-term construction contracts should utilize the Percentage-of-Completion method to recognize revenue based on contract costs incurred relative to total estimated costs.
Working Capital (Current Assets minus Current Liabilities) and the Working Capital Ratio (Current Assets divided by Current Liabilities) measure short-term liquidity; contractors should maintain a ratio between 1.5 and 2.0 to buffer against retainage and payroll delays.
Overhead calculation requires identifying all indirect operational expenses and applying an overhead markup percentage to direct project costs to ensure company profitability.
Last updated: July 2026
Financial Statements, Cash vs. Accrual Accounting & Cash Flow
Sound financial management is the backbone of a successful construction enterprise. A contractor may possess superior trade craftsmanship, yet fail due to improper cash flow forecasting, miscalculated overhead, or inadequate financial statement analysis. General contractors in Minnesota must understand accounting standards, financial statement interpretation, working capital requirements, and job-cost accounting methods.
The Three Core Financial Statements
Financial accounting produces three financial statements that summarize a contracting firm's fiscal health: the Balance Sheet , the Income Statement (Profit & Loss) , and the Statement of Cash Flows .
1. The Balance Sheet
The Balance Sheet provides a snapshot of a construction company's financial position at a specific point in time (e.g., as of December 31). It is governed by the fundamental accounting equation: Assets = Liabilities + Owner’s Equity \text{Assets} = \text{Liabilities} + \text{Owner's Equity} Assets = Liabilities + Owner’s Equity
Assets: Economic resources owned or controlled by the contractor. They are divided into:
Current Assets: Cash, marketable securities, accounts receivable, contracts receivable, unbilled work, and inventory expected to be converted to cash within 12 months.
Non-Current (Fixed) Assets: Heavy machinery, trucks, real estate, office equipment, and tools (less accumulated depreciation).
Liabilities: Financial obligations owed to third parties. They are divided into:
Current Liabilities: Accounts payable to material suppliers, trade subcontractor payables, short-term bank credit lines, accrued payroll, and taxes due within 12 months.
Long-Term Liabilities: Equipment loans, mortgages, and long-term notes payable extending beyond one year.
Owner's (Stockholders') Equity: The net worth of the business, representing capital contributions by owners plus retained earnings accumulated over time.
2. The Income Statement (Profit & Loss / P&L)
The Income Statement measures financial performance over a specified period of time (e.g., a fiscal year or quarter). It tracks revenue, direct project expenses, overhead expenses, and net earnings: Net Income = Gross Revenue − Direct Construction Costs (COGS) − Indirect Overhead Expenses \text{Net Income} = \text{Gross Revenue} - \text{Direct Construction Costs (COGS)} - \text{Indirect Overhead Expenses} Net Income = Gross Revenue − Direct Construction Costs (COGS) − Indirect Overhead Expenses
Gross Revenue: Total billings or earned revenue from completed construction contracts.
Cost of Goods Sold (COGS) / Direct Costs: Expenses directly tied to job production, including jobsite labor, building materials, equipment rentals, permit fees, and subcontractor payables.
Gross Profit: Revenue minus Direct Costs.
Operating Expenses / Indirect Costs (Overhead): General office rent, executive salaries, insurance premiums, legal fees, and administrative utilities.
Net Profit (Net Income): Gross profit minus overhead expenses and income taxes.
3. The Statement of Cash Flows
While the Income Statement shows profitability, the Statement of Cash Flows tracks actual inflows and outflows of liquid cash. It isolates cash movements across three operational categories:
Operating Activities: Cash receipts from project billings minus cash paid for materials, payroll, and overhead.
Investing Activities: Purchases or sales of capital assets such as excavators, vehicles, or property.
Financing Activities: Cash from capital injections, loan borrowings, debt principal repayments, or owner distributions.
Exam Tip: Profitability does not equal cash flow. A contractor can report strong net income on paper under accrual accounting but go bankrupt if cash is tied up in uncollected accounts receivable and unpaid retainage.
Accounting Methods in Construction
Construction contractors utilize three primary accounting methods depending on company size, tax strategy, and financial reporting needs.
Cash Accounting vs. Accrual Accounting vs. Percentage-of-Completion
Accounting Method Revenue Recognition Cost Recognition Primary Use / Suitability
Cash Method Recognized when cash payment is received Recognized when bill is paid in cash Small contractors; simple tax reporting (subject to IRS revenue limits)
Accrual Method Recognized when job is billed/earned Recognized when invoice is received/incurred Standard business reporting; matches income and expenses to time periods
Percentage-of-Completion (PoC) Recognized based on percentage of job costs incurred to date Recognized as incurred matching progress Required under GAAP for long-term construction contracts; preferred by sureties
Completed-Contract Method (CCM) Recognized only when job is 100% complete Deferred until job completion Small contractors with short contracts or highly uncertain cost estimates
The Percentage-of-Completion (PoC) Method
Under GAAP (and ASC 606), long-term construction projects must use the Percentage-of-Completion Method . Revenue is recognized proportionally as work progresses based on the ratio of costs incurred to total estimated project costs: Percent Complete = Actual Costs Incurred to Date Total Estimated Construction Costs \text{Percent Complete} = \frac{\text{Actual Costs Incurred to Date}}{\text{Total Estimated Construction Costs}} Percent Complete = Total Estimated Construction Costs Actual Costs Incurred to Date Earned Revenue to Date = Percent Complete × Total Contract Price \text{Earned Revenue to Date} = \text{Percent Complete} \times \text{Total Contract Price} Earned Revenue to Date = Percent Complete × Total Contract Price
If total billings exceed earned revenue, the excess is reported on the Balance Sheet as a current liability titled Billings in Excess of Costs (Overbillings) . Conversely, if earned revenue exceeds billings, it is reported as a current asset titled Costs in Excess of Billings (Underbillings) .
Crucial Financial Ratios & Liquidity Management
Surety bond underwriters and commercial lenders evaluate a general contractor's financial liquidity using standard financial ratios.
Working Capital & Working Capital Ratio
Working Capital represents the liquid capital available to fund daily operations, mobilize new jobs, and meet payroll before owner payments are collected: Working Capital = Current Assets − Current Liabilities \text{Working Capital} = \text{Current Assets} - \text{Current Liabilities} Working Capital = Current Assets − Current Liabilities Working Capital Ratio = Current Assets Current Liabilities \text{Working Capital Ratio} = \frac{\text{Current Assets}}{\text{Current Liabilities}} Working Capital Ratio = Current Liabilities Current Assets
Target Ratio: General contractors should target a Working Capital Ratio between 1.5 and 2.0 .
Interpretation: A ratio below 1.0 indicates negative working capital, meaning current debts exceed current assets, signaling immediate insolvency risk. A ratio above 2.5 may indicate underutilized cash assets.
Quick Ratio (Acid-Test)
Measures immediate liquidity by excluding inventory and unbilled work: Quick Ratio = Cash + Marketable Securities + Accounts Receivable Current Liabilities \text{Quick Ratio} = \frac{\text{Cash} + \text{Marketable Securities} + \text{Accounts Receivable}}{\text{Current Liabilities}} Quick Ratio = Current Liabilities Cash + Marketable Securities + Accounts Receivable
Target: A quick ratio of 1.0 or higher demonstrates strong liquidity to satisfy short-term debts without selling equipment or relying on pending billings.
Retainage Handling & Cash Flow Management
Retainage (Retention) is a contractual practice where the project owner withholds a percentage of each progress payment (typically 5% to 10% ) from the general contractor until substantial project completion and final punch-list sign-off.
Retainage Cash Flow Impact
Because standard contractor profit margins often range between 5% and 10%, the contractor's entire net profit on a project is frequently locked up in retainage until project closeout. General contractors must ensure trade subcontracts mirror owner retainage terms (pass-through retainage) to prevent funding subcontractor retainage out of pocket.
Overhead Calculation & Dual-Markup Formulas
Contractors must accurately calculate general overhead expenses to avoid bidding projects at a loss. Overhead Percentage = Total Annual Indirect Overhead Expenses Total Annual Direct Construction Costs × 100 \text{Overhead Percentage} = \frac{\text{Total Annual Indirect Overhead Expenses}}{\text{Total Annual Direct Construction Costs}} \times 100 Overhead Percentage = Total Annual Direct Construction Costs Total Annual Indirect Overhead Expenses × 100
Converting Overhead & Profit Desires into Bid Markups
To earn a target profit after covering overhead, a contractor applies a markup to direct job estimates: Bid Price = Direct Construction Costs 1 − ( Overhead % + Desired Profit % ) \text{Bid Price} = \frac{\text{Direct Construction Costs}}{1 - (\text{Overhead \%} + \text{Desired Profit \%})} Bid Price = 1 − ( Overhead % + Desired Profit % ) Direct Construction Costs
Worked Financial Math Examples
Scenario 1: Percentage-of-Completion Revenue A contractor enters into a $1,000,000 fixed-price contract. Estimated direct costs are $800,000. At year-end, actual costs incurred are $400,000.
Percent Complete: $ 400 , 000 $ 800 , 000 = 50 % \frac{\text{\textdollar}400,000}{\text{\textdollar}800,000} = 50\% $ 800 , 000 $ 400 , 000 = 50%
Earned Revenue: 50 % × $ 1 , 000 , 000 = $ 500 , 000 50\% \times \text{\textdollar}1,000,000 = \text{\textdollar}500,000 50% × $ 1 , 000 , 000 = $ 500 , 000
Gross Profit Recognized: $ 500 , 000 − $ 400 , 000 = $ 100 , 000 \text{\textdollar}500,000 - \text{\textdollar}400,000 = \text{\textdollar}100,000 $ 500 , 000 − $ 400 , 000 = $ 100 , 000
Scenario 2: Working Capital & Overhead Markup A contractor has $600,000 in Current Assets and $300,000 in Current Liabilities.
Working Capital: $ 600 , 000 − $ 300 , 000 = $ 300 , 000 \text{\textdollar}600,000 - \text{\textdollar}300,000 = \text{\textdollar}300,000 $ 600 , 000 − $ 300 , 000 = $ 300 , 000
Working Capital Ratio: $ 600 , 000 $ 300 , 000 = 2.0 \frac{\text{\textdollar}600,000}{\text{\textdollar}300,000} = 2.0 $ 300 , 000 $ 600 , 000 = 2.0
If annual overhead is $150,000 and direct project costs total $1,000,000, the overhead rate is 15 % 15\% 15% . To achieve a 10 % 10\% 10% net profit margin on a job with $100,000 direct costs:
Bid Price: $ 100 , 000 1 − ( 0.15 + 0.10 ) = $ 100 , 000 0.75 = $ 133 , 333.33 \frac{\text{\textdollar}100,000}{1 - (0.15 + 0.10)} = \frac{\text{\textdollar}100,000}{0.75} = \text{\textdollar}133,333.33 1 − ( 0.15 + 0.10 ) $ 100 , 000 = 0.75 $ 100 , 000 = $ 133 , 333.33