Study guide
8.3 Occurrence vs. Claims-Made Triggers
Minnesota Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Minnesota Property & Casualty Insurance Exam Overview
Minnesota Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D: Coverage for Damage to Your Auto 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Minnesota P&C Insurance Regulation & Licensing
1.1 Minnesota Department of Commerce 1.2 Minnesota P&C Producer Licensing Requirements 1.3 Unfair Trade Practices and Consumer Protections
22 Chapter 2: Minnesota Property Insurance
2.1 Minnesota Homeowners Insurance 2.2 Minnesota Commercial Property Insurance
23 Chapter 3: Minnesota Auto & Casualty Insurance
3.1 Minnesota Auto Insurance Requirements 3.2 Minnesota Workers' Compensation Insurance 3.3 Minnesota General Liability Insurance
24 Chapter 4: Minnesota Ethics & Professional Conduct
4.1 Ethical Principles and Fiduciary Duties 4.2 Prohibited Practices Under Minnesota Law 4.3 Consumer Protection in Minnesota
8.3 Occurrence vs. Claims-Made Triggers
Key Takeaways Explain This Topic AI
Occurrence form (CG 00 01) responds to injury occurring during the policy period regardless of when the claim is reported.
Claims-made form (CG 00 02) responds to claims first made during the policy period, only for injury on or after the retroactive date.
An injury before the retroactive date is never covered, even if the claim is timely — always the first test to apply.
Basic ERP is automatic and limited; Supplemental ERP (tail) must be purchased; prior-acts (nose) coverage backdates a new retro date to avoid gaps.
Last updated: June 2026
The Coverage Trigger Problem
Liability claims often surface years after the negligent act — think of slowly developing pollution, defective products, or professional errors. The coverage trigger answers the question: which policy year responds? The ISO Commercial General Liability form comes in two trigger versions, and confusing them is one of the most heavily tested casualty topics.
Occurrence form — CG 00 01 — covers injury or damage that occurs during the policy period , no matter when the claim is later reported.
Claims-made form — CG 00 02 — covers claims first made during the policy period (or extended reporting period), provided the injury occurred on or after the retroactive date .
Occurrence Trigger
Under the occurrence form , the date the bodily injury or property damage happens locks in coverage. A 2026 policy responds to a 2026 injury even if the lawsuit arrives in 2031. Advantages: simple, no reporting deadline, no tail needed. Disadvantage for insurers: long-tail exposure forces them to hold reserves for decades, which is why occurrence forms cost more for hazardous classes and why claims-made forms were created for medical malpractice and other long-tail risks.
Claims-Made Trigger — Three Moving Parts
The claims-made form requires two events to align plus optional tail coverage:
Retroactive date — the earliest injury date the policy will cover. Injury before the retro date is never covered, even if the claim is timely. Never let the retro date advance when renewing — that creates a coverage gap.
Policy period — the claim must be first reported during this window.
Extended Reporting Period (ERP / "tail") — covers claims reported after expiration for injuries that occurred during the policy term.
ISO provides a Basic ERP (automatic, limited: typically a 60-day reporting tail plus a 5-year tail for occurrences already reported) and a purchasable Supplemental ERP with no time limit. A Basic ERP is free and automatic; the Supplemental ERP must be requested, usually within 60 days of expiration.
The Three-Step Claims-Made Test
- Step Question If "No"
- 1 Did the injury occur on or after the retroactive date? No coverage
- 2 Was the claim first made during the policy period or ERP? No coverage
- 3 Is the injury within the policy's other terms/limits? Apply limits
Worked trap: a policy has a retro date of 1/1/2024 and a term of 1/1/2026-1/1/2027 . An injury occurred in 2023 and the claim is made in 2026. No coverage — the injury predates the retro date, so step 1 fails even though the claim was timely reported.
Retroactive Date and Tail Coverage
For claims-made forms, two dates govern coverage and generate many questions. The retroactive date is the earliest injury date the policy will cover — anything occurring before it is excluded even if claimed during the policy period. The extended reporting period (ERP, or "tail") covers claims made after the policy ends for injuries that occurred during the active period; a basic tail is automatic and short (e.g., 60 days), while a supplemental tail is purchased for a longer or unlimited window.
Why the Trigger Matters: Long-Tail Claims
Occurrence triggers shine for long-tail exposures (asbestos, pollution, latent defects) where injury manifests years after exposure — the policy in force when the injury occurred responds, even decades later. Claims-made was developed precisely because insurers could not reserve adequately for such stacking. On the exam, match the trigger to the timeline: if a question stresses when the claim was first made and a retroactive date, it is claims-made ; if it stresses when the injury happened , it is occurrence .
Reporting the Claim: Notice as a Condition
Both triggers depend on the insured satisfying the notice/duties condition. Under a claims-made form, a claim first made and reported during the policy period (or tail) triggers coverage, so prompt reporting is essential. Many claims-made forms also allow reporting a potential claim (circumstance) during the period to lock in coverage even if the actual claim arrives later. Late notice that prejudices the insurer can defeat coverage — a tested overlap between the trigger concept and policy conditions.
Batch Clauses and Trigger Theories
For mass or repeated injuries, a batch clause treats all claims arising from one root cause as a single occurrence (and one deductible/limit), important for products liability. Courts also apply trigger theories — exposure , manifestation , injury-in-fact , and continuous (triple) trigger — to decide which occurrence policies respond to long-latency harm like asbestos. The exam keeps this conceptual: know that the occurrence form's response depends on when the injury occurred , which these theories pinpoint.