Study guide
6.4 Part C Uninsured/Underinsured Motorists
Minnesota Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Minnesota Property & Casualty Insurance Exam Overview
Minnesota Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D: Coverage for Damage to Your Auto 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Minnesota P&C Insurance Regulation & Licensing
1.1 Minnesota Department of Commerce 1.2 Minnesota P&C Producer Licensing Requirements 1.3 Unfair Trade Practices and Consumer Protections
22 Chapter 2: Minnesota Property Insurance
2.1 Minnesota Homeowners Insurance 2.2 Minnesota Commercial Property Insurance
23 Chapter 3: Minnesota Auto & Casualty Insurance
3.1 Minnesota Auto Insurance Requirements 3.2 Minnesota Workers' Compensation Insurance 3.3 Minnesota General Liability Insurance
24 Chapter 4: Minnesota Ethics & Professional Conduct
4.1 Ethical Principles and Fiduciary Duties 4.2 Prohibited Practices Under Minnesota Law 4.3 Consumer Protection in Minnesota
6.4 Part C Uninsured/Underinsured Motorists
Key Takeaways Explain This Topic AI
Part C UM pays when the at-fault driver has no insurance (including hit-and-run); UIM pays when their limits are too low.
The insured must be legally entitled to recover - the other driver must be at fault for Part C to respond.
Reduction method: UIM = UIM limit minus the liability already paid; add-on method stacks UIM on top of that limit.
Get the UM/UIM insurer's consent before settling with the at-fault driver or you may forfeit the claim and its subrogation rights.
Last updated: June 2026
The Gap Part C Fills
Even with compulsory insurance laws, many at-fault drivers cannot pay. The Insurance Research Council (2023) estimated that roughly 14-15% of U.S. drivers are uninsured , and a larger share are underinsured . Part C - Uninsured Motorists (UM) coverage pays the insured for bodily injury (and, where elected, property damage) caused by an at-fault driver who has no liability insurance. Underinsured Motorists (UIM) coverage applies when the at-fault driver has insurance but not enough to pay the insured's damages.
Part C is first-party coverage but it behaves like third-party recovery: the insured must be legally entitled to recover from the other driver - meaning the other driver must be at fault . If the insured is the at-fault party, Part C does not respond.
Uninsured vs. Underinsured Definitions
Term Definition
Uninsured (UM) At-fault driver has NO liability policy, a policy below the state minimum, an insolvent insurer, or is a hit-and-run driver who cannot be identified
Underinsured (UIM) At-fault driver HAS liability limits, but those limits are less than the insured's damages (or less than the insured's UIM limit)
A hit-and-run ("phantom vehicle") that injures the insured and flees triggers UM , not Part A or Part D. Many states require physical contact for a hit-and-run UM claim, or independent corroboration if no contact occurred - a frequently tested nuance.
How UIM Pays: Reduction vs. Add-On (Worked Numerics)
States use one of two methods to calculate UIM, and exam questions hinge on which applies.
Difference (reduction) method - the majority rule: UIM pays the insured's UIM limit minus what the at-fault driver's liability already paid.
Worked example: Insured's damages = $100,000 . At-fault driver's liability limit = $25,000 (paid in full). Insured's UIM limit = $100,000 . UIM pays $100,000 - $25,000 = $75,000 . Total recovery = $25,000 + $75,000 = $100,000.
Add-on (excess) method - a minority of states: UIM stacks on top of the at-fault limit up to the UIM limit. Same facts: insured collects $25,000 + the full $100,000 UIM = up to $125,000 (capped at actual damages of $100,000, so $100,000).
Consent-to-Settle, Stacking, and Offers
Three exam-critical conditions:
Consent to settle / subrogation: Before settling with the at-fault driver, the insured pursuing UM/UIM should obtain the UM/UIM insurer's written consent . Settling and signing a release without consent can destroy the insurer's subrogation rights and forfeit the UM/UIM claim.
Stacking: In some states an insured with multiple vehicles or policies may stack (add together) UM/UIM limits across vehicles; many policies and states prohibit anti-stacking clauses or allow waivers.
Mandatory offer: Insurers must offer UM/UIM coverage; an insured who declines must usually do so in writing . UM bodily injury is commonly mandatory in most states even when UIM is optional.
Remember the hierarchy: Part A pays others; Part B pays the insured's medical regardless of fault; Part C pays the insured when someone else is at fault but uninsured/underinsured.
UM vs. UIM: The Core Distinction
Uninsured Motorists (UM) pays when the at-fault driver has no liability insurance, is unidentified (hit-and-run with contact, in most states), or whose insurer is insolvent . Underinsured Motorists (UIM) pays when the at-fault driver has insurance but insufficient limits to cover your injuries. UM/UIM is first-party coverage that responds to your damages for bodily injury (and, in some states, property damage).
UIM Worked Example and the Trigger
You carry $100,000 UIM. The at-fault driver carries only $50,000 liability, and your damages are $90,000 . UIM is triggered because the other driver's $50,000 is less than your need. Under the common difference (excess) method , you collect $50,000 from the at-fault carrier and your UIM pays the $40,000 gap up to your $100,000 limit. Note many states (including Minnesota) require insurers to offer UM/UIM and require written rejection to waive it — a frequent state-portion crossover point.
Stacking and the "Phantom Vehicle" Rule
Two more UM/UIM points recur. Stacking allows an insured with multiple covered autos (or multiple policies) to add the UM/UIM limits together in some states, multiplying available coverage; other states and policy language prohibit stacking. For hit-and-run (phantom vehicle) UM claims, most states require physical contact with the unidentified vehicle (or independent corroboration) to prevent fraudulent "a car ran me off the road" claims.
Limits Offer Requirement
States typically require insurers to offer UM/UIM at limits equal to the liability limit; the insured must reject in writing to take lower limits or none. A producer who fails to document that rejection invites an E&O claim — tying this national concept to the state and ethics portions.
Arbitration and the Exhaustion Requirement
UM/UIM disputes over fault or amount are commonly resolved by arbitration under the policy. For UIM , most policies require the insured to first exhaust the at-fault driver's liability limits (or obtain the insurer's consent to settle) before UIM pays, protecting the UIM insurer's subrogation rights against the underinsured driver. Settling with the at-fault carrier without consent can forfeit UIM coverage — a trap the exam uses to test whether you understand the exhaustion-and-consent sequence.