Study guide

1.3 Legal Descriptions and Surveys

Minnesota Real Estate Salesperson Exam

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

How This Guide Maps to the Minnesota Salesperson Exam

2 National Portion: Chapter 1: Real Property Characteristics, Legal Descriptions & Property Use

1.1 Real Property vs. Personal Property 1.2 Physical and Economic Characteristics of Real Property 1.3 Legal Descriptions and Surveys 1.4 Land-Use Controls, Public & Private Restrictions, and Encumbrances

3 National Portion: Chapter 2: Forms of Ownership, Transfer & Recording of Title

2.1 Estates, Ownership Forms, Rights, and Interests 2.2 Deeds, Title Transfer, Title Insurance, and Recording

4 National Portion: Chapter 3: Property Value & Appraisal

3.1 The Concept of Value and Economic Principles 3.2 The Appraisal Process and USPAP Basics 3.3 Valuation Approaches (Sales Comparison, Cost, Income) and BPOs

5 National Portion: Chapter 4: Real Estate Contracts & Agency

4.1 Contract Types and Required Elements 4.2 Contract Performance, Breach, and Enforceability 4.3 Listing and Sales Contracts and Contingencies 4.4 Agency Relationships, Fiduciary Duties, and Disclosure

6 National Portion: Chapter 5: Real Estate Practice (Brokerage, Fair Housing, Risk)

5.1 Broker Responsibilities, Brokerage Agreements, and Compensation 5.2 Federal Fair Housing Law and Protected Classes 5.3 Advertising, Antitrust, and Risk Management

7 National Portion: Chapter 6: Property Disclosures & Environmental Issues

6.1 Property Conditions and Environmental Hazards 6.2 Disclosure Obligations, Stigmatized Property, and Liability

8 National Portion: Chapter 7: Financing & Settlement

7.1 Financing Concepts, Notes, Mortgages, and Deeds of Trust 7.2 Loan Types, Lender Requirements, PMI, and Mortgage Insurance 7.3 Federal Financing Regulations (RESPA, TILA, ECOA, TRID) 7.4 Settlement, Closing Statements, and Prorations

9 National Portion: Chapter 8: Real Estate Math Calculations

8.1 Area, Volume, and Valuation Calculations 8.2 Commission, Financing, and Interest Calculations 8.3 Proration, Transfer Tax, and Investment Math

10 Chapter 1: Minnesota Commerce Department & Licensing

1.1 Minnesota Department of Commerce 1.2 Minnesota License Requirements 1.3 License Exemptions & Violations 1.4 Sponsorship & Employment

11 Chapter 2: Agency & Disclosure

2.1 Agency Relationships in Minnesota 2.2 Fiduciary Duties 2.3 Brokerage Agreements 2.4 Commission & Compensation

12 Chapter 3: Contracts & Property

3.1 Minnesota Seller Disclosure 3.2 Environmental & Radon Disclosure 3.3 Purchase Contracts 3.4 Property Ownership & Title

13 Chapter 4: Trust Accounts & Violations

4.1 Trust Account Requirements 4.2 Minnesota Fair Housing 4.3 Minnesota Landlord-Tenant Law 4.4 Taxes & Closing Requirements

1.3 Legal Descriptions and Surveys

Key Takeaways Explain This Topic AI

The three legal-description methods are metes and bounds, rectangular (government) survey, and lot-and-block (recorded plat).

Metes and bounds starts and ends at the same point of beginning (POB) and uses distances, directions, and monuments.

A section is 1 mile square and contains 640 acres; a township is 6 miles square and holds 36 sections.

Lot-and-block descriptions reference a recorded subdivision plat and are common in developed areas.

Datums and benchmarks measure elevation for condos, air rights, and subsurface rights.

Last updated: June 2026

Why Legal Descriptions Matter

A street address is not a legal description. To convey title, deeds use a legal description precise enough to locate a parcel without ambiguity. Three accepted systems appear on the exam.

1. Metes and Bounds

The oldest method, used in the original colonies and for irregular parcels. It describes the boundary by metes (distances and directions) and bounds (monuments and reference points). Rules the exam tests:

The description must begin and end at the same point of beginning (POB) so the boundary closes.

It proceeds in sequence (e.g., "N 30 degrees E for 200 feet to an iron pin").

Monuments (a fixed iron pin, an oak tree, a road) generally control over stated distances if the two conflict.

Trap: a description that does not return to the POB does not enclose a parcel and is defective. If the metes-and-bounds call never closes, the description fails.

The Rectangular (Government) Survey System

Used in most states west of the original colonies. It overlays land with principal meridians (north-south lines) and base lines (east-west lines), then divides land into a grid.

The Math You Must Know

  • Unit Size Contains
  • Township 6 miles x 6 miles (36 sq. mi.) 36 sections
  • Section 1 mile x 1 mile 640 acres
  • Quarter section 1/2 mile x 1/2 mile 160 acres
  • Quarter-quarter 1/4 mile x 1/4 mile 40 acres

Key constants: 1 acre = 43,560 square feet , 1 section = 640 acres , 1 township = 36 sections . Sections within a township are numbered 1 to 36 in a serpentine (boustrophedon) pattern, beginning in the NE corner with section 1 and ending in the SE corner with section 36.

Worked acreage problem

Describe "the NW 1/4 of the SE 1/4 of Section 8." Work right to left , dividing as you go:

SE 1/4 of the section = 640 / 4 = 160 acres .

NW 1/4 of that = 160 / 4 = 40 acres .

Each time the description adds a quarter, divide by 4. Two quarters means 640 / 16 = 40 acres. If a problem reads "the N 1/2 of the NE 1/4," that is 640 / 4 = 160, then / 2 = 80 acres .