Study guide
16.1 Surety and Fidelity Bonds
Missouri Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Missouri Property & Casualty Insurance Exam Overview
Missouri Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
Risk, Hazards, Perils, and the Law of Large Numbers Insurable Interest, Indemnity, and Other Insurance Principles Insurance Contract Law and Elements Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
Homeowners Forms HO-2 through HO-8 and Eligibility Section I Coverages A-D and Additional Coverages Section I Perils Insured Against and Exclusions Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
Section II Coverages E (Liability) and F (Medical Payments) Homeowners Conditions and Duties After Loss Common Homeowners Endorsements (Scheduled Property, Water Backup, Ordinance or Law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D: Coverage for Damage to Your Auto 7.2 Exclusions and Part E: Duties After an Accident 7.3 Part F: General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
Businessowners Policy (BOP) in Depth Crime and Fidelity Coverage Inland Marine and Nationwide Marine Definition Ocean Marine Coverages (Hull, Cargo, Freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Missouri P&C Insurance Regulation & Licensing
1.1 Missouri Department of Commerce and Insurance 1.2 Missouri Producer Licensing Requirements 1.3 License Renewal & Continuing Education 1.4 Producer Responsibilities and Duties
22 Chapter 2: Missouri Property Insurance
2.1 Homeowners Insurance in Missouri 2.2 Property Perils, Exclusions, and Flood Insurance 2.3 Missouri FAIR Plan
23 Chapter 3: Missouri Casualty & Auto Insurance
3.1 Missouri Auto Insurance Requirements 3.2 Missouri Workers' Compensation Insurance 3.3 General Liability Insurance
16.1 Surety and Fidelity Bonds
Key Takeaways Explain This Topic AI
A surety bond has three parties: principal (performs), obligee (protected), and surety (guarantees); the surety expects no net loss and can recover from the principal.
The bond penalty is a maximum; the surety pays the actual loss (e.g., the extra re-letting cost on a bid bond) up to that penalty.
Contract bonds = bid, performance, payment, and maintenance bonds; performance bonds typically equal 100% of the contract price.
Fidelity bonds are two-party coverage for employee dishonesty and align with ISO Commercial Crime employee theft, not surety.
License/permit, court (judicial and fiduciary), and public official bonds are the main non-contract surety categories.
Last updated: June 2026
Surety and Fidelity Bonds
The National Portion of the Property & Casualty exam treats surety as a tested category that is conceptually separate from insurance. A surety bond is a three-party agreement, while a typical insurance policy is a two-party contract. You must be able to name all three parties and explain who pays losses and who is ultimately responsible. Expect at least one item asking you to distinguish surety from insurance, and one numerical/structural item on bond penalty (the bond limit) versus a policy limit.
The Three Parties
Every surety bond has three named parties. Memorize these roles exactly the way the exam phrases them:
- Party Role Exam phrasing
- Principal The party who must perform the obligation The contractor / licensee "who buys the bond"
- Obligee The party protected by the bond The project owner or government agency
- Surety The party guaranteeing performance The insurer issuing the bond
The key distinction from insurance: the surety expects no loss . If the surety pays the obligee, it has a legal right of reimbursement (indemnity) from the principal. Contrast this with insurance, where the insurer absorbs the loss and uses premium pooling to fund it, with no expectation of repayment from the insured.
Contract Surety Bonds
Contract bonds guarantee performance of a construction contract. The three classic forms appear repeatedly on the exam:
Bid bond - guarantees that, if awarded the job, the contractor will enter the contract and furnish the required performance/payment bonds. If the low bidder backs out, the surety pays the difference between the low bid and the next-lowest bid, up to the bond penalty.
Performance bond - guarantees the contractor will complete the work per contract terms. Penalty is usually 100% of the contract price.
Payment bond (labor and material bond) - guarantees subcontractors and suppliers are paid, protecting the owner from mechanic's liens.
Maintenance bond - guarantees workmanship for a stated period after completion (often one year).
Worked Example - Bid Bond Loss
A contractor submits a low bid of $480,000 and posts a 10% bid bond ($48,000 penalty). The contractor then refuses to sign. The owner re-awards to the next-lowest bidder at $510,000.
- Extra cost to owner: $510,000 - $480,000 = $30,000
- Bond penalty (limit): $48,000
- Surety pays the obligee: the lesser of the extra cost or the penalty = $30,000
Surety then seeks $30,000 reimbursement from the principal (the defaulting contractor).
Trap: candidates often answer $48,000 (the full penalty). The penalty is a maximum , not the amount paid. The surety pays the actual additional cost, capped at the penalty.
License/Permit, Court, and Public Official Bonds
Beyond construction, the exam tests several non-contract surety categories:
License and permit bonds - required by a government body before issuing a license (e.g., a producer's surety bond, contractor licensing). They guarantee the licensee complies with the law and pay third parties harmed by violations.
Court bonds - includes judicial bonds (appeal bonds, attachment bonds) and fiduciary bonds (guardian, administrator, executor bonds) guaranteeing faithful handling of estate assets.
Public official bonds - guarantee honest, faithful performance by an elected/appointed official.
Fidelity Bonds vs. Surety
Fidelity bonds are frequently tested as a contrast to surety. A fidelity bond is a two-party arrangement (insurer and insured employer) that protects the employer against loss from dishonest acts of its own employees - embezzlement, theft, forgery. It functions much more like insurance than like surety because there is no expectation of reimbursement from the dishonest employee.
Note the overlap with the ISO Commercial Crime program: employee theft coverage in the Crime Coverage Form (CR 00 21) is the modern successor to the standalone fidelity bond. The exam may ask which coverage responds when a bookkeeper steals company funds - the answer is employee theft / fidelity, not a surety bond.
The Three-Party Surety Relationship and Bond Types
Surety is a three-party arrangement, and naming the parties correctly is the most-tested surety fact. The principal is the party who must perform an obligation, the obligee is the party protected and entitled to performance, and the surety is the company that guarantees the principal's performance to the obligee. Unlike insurance, surety expects no losses in pricing and the surety has a right of reimbursement (indemnity) from the principal if it pays a claim, so a paid surety loss is effectively an extension of credit, not a transfer of risk.
Contract bonds guarantee construction performance and break into a familiar sequence. A bid bond guarantees that a winning bidder will enter the contract and furnish the required bonds; if it refuses, the bond pays the difference between its bid and the next bidder. A performance bond guarantees the contractor will complete the project per the contract. A payment bond guarantees that subcontractors and suppliers will be paid, protecting the owner from liens. A maintenance bond guarantees workmanship for a stated period after completion.
License and permit bonds guarantee that a licensee (a contractor, mortgage broker, or motor-vehicle dealer) will comply with the law and regulations governing the license; an insurance producer in some states must post such a bond. Judicial and fiduciary bonds guarantee the faithful performance of court-appointed parties such as executors, guardians, and administrators. Public official bonds guarantee the honest performance of officeholders who handle public funds.
Worked scenario: a general contractor wins a $2,000,000 public job. The owner requires a bid bond (already provided), a performance bond, and a payment bond. The contractor abandons the job half-finished. The performance bond surety steps in to complete the work or pay the cost to complete, then exercises its indemnity right to recover from the contractor; unpaid subcontractors look to the payment bond . Matching the bond type to the obligation it guarantees is the core surety skill.
Key Takeaways
Surety is a three-party guarantee (principal performs, obligee is protected, surety guarantees) with a right of reimbursement from the principal, unlike two-party insurance. Contract bonds (bid, performance, payment, maintenance) guarantee construction obligations; license/permit, judicial/fiduciary, and public-official bonds guarantee legal and faithful performance. A fidelity bond, by contrast, is insurance protecting an employer against its own employees' dishonesty, equivalent to commercial crime employee-theft coverage.