Study guide
1.2 Operator Certification, Experience Requirements & Reciprocity
Missouri Water and Wastewater Operator Certification Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Missouri State Laws, Regulations & Operator Certification
1.1 MoDNR Regulatory Framework & Operator Classification 1.2 Operator Certification, Experience Requirements & Reciprocity 1.3 Certification Renewal, Continuing Education & Compliance 1.4 Federal & State Drinking Water & Clean Water Acts 1.5 Missouri Design Standards, Construction Permits & the Design Guides 1.6 Utility Management, Administration & Recordkeeping
2 Chapter 2: Water Sources, Hydrology & Raw Water Quality
2.1 Hydrologic Cycle, Groundwater & Surface Water Sources 2.2 Well Construction, Sanitary Protection & Groundwater Hydraulics 2.3 Physical, Chemical & Biological Characteristics of Raw Water 2.4 Water Chemistry Fundamentals for Operators
3 Chapter 3: Coagulation, Flocculation & Sedimentation Processes
3.1 Coagulation Principles & Chemical Additives 3.2 Flocculation Hydraulics & Floc Formation 3.3 Sedimentation Basin Design, Clarifiers & Solids Separation 3.4 Aeration, Taste & Odor Control 3.5 Jar Testing Procedure & Chemical Feed Equipment
4 Chapter 4: Granular Media Filtration & Membrane Technologies
4.1 Conventional Rapid Sand & Dual/Multi-Media Filtration 4.2 Filter Operations, Backwashing & Turbidity Optimization 4.3 Membrane Filtration: Microfiltration, Ultrafiltration, Nanofiltration & Reverse Osmosis
5 Chapter 5: Water Disinfection & Chemical Handling Safety
5.1 Chlorination Chemistry, Breakpoint & Residual Monitoring 5.2 Alternative Disinfectants: Chloramines, Chlorine Dioxide, Ozone & UV 5.3 Disinfection Byproducts & Regulatory Compliance 5.4 Chlorine Gas Safety, Storage & Emergency Containment 5.5 CT Values, Contact Time & Log Inactivation Compliance 5.6 Wastewater Effluent Disinfection & Dechlorination
6 Chapter 6: Softening, Stabilization, Iron/Manganese Removal & Fluoridation
6.1 Lime-Soda Ash Softening & Ion Exchange Demineralization 6.2 Iron and Manganese Removal Technologies 6.3 Corrosion Control, Lead & Copper Rule & Stabilization 6.4 Fluoridation Chemistry, Feed Equipment & Safety
7 Chapter 7: Water Distribution Systems & Infrastructure Operations
7.1 Distribution Piping, Main Installation & Appurtenances 7.2 Distribution Storage Facilities & Pressure Management 7.3 Valves, Fire Hydrants & Metering Systems 7.4 Cross-Connection Control & Backflow Prevention
8 Chapter 8: Wastewater Characteristics, Preliminary & Primary Treatment
8.1 Wastewater Characteristics, Flow Variations & Sampling 8.2 Preliminary Treatment: Screening, Grinding & Grit Removal 8.3 Primary Clarification & Sedimentation Operations
9 Chapter 9: Biological Wastewater Treatment & Secondary Processes
9.1 Activated Sludge Fundamentals & Microbiology 9.2 Activated Sludge Process Control & Operational Parameters 9.3 Activated Sludge Variations: Extended Aeration, Oxidation Ditches & SBRs 9.4 Fixed-Film Processes & Waste Stabilization Ponds
10 Chapter 10: Advanced Wastewater Treatment, Nutrient Removal & Sludge Management
10.1 Biological & Chemical Phosphorus Removal 10.2 Biological Nitrogen Removal: Nitrification & Denitrification 10.3 Sludge Thickening, Stabilization & Digestion 10.4 Biosolids Dewatering, Land Application & 40 CFR Part 503 10.5 Thermal Solids Reduction & Sewage Sludge Incineration
11 Chapter 11: Wastewater Collection Systems & Lift Station Maintenance
11.1 Gravity Sewer Design, Hydraulics & Inflow/Infiltration 11.2 Lift Stations, Pumps & Level Control Systems 11.3 Collection System Operation, Cleaning & Inspection
12 Chapter 12: Water & Wastewater Laboratory Methods, Process Math & Safety
12.1 Water & Wastewater Laboratory Procedures & QA/QC 12.2 Applied Math: Pounds Formula, Chemical Feed & Flow Conversions 12.3 Applied Math: Process Loading, Weir Rates, SVI & Sludge Age 12.4 Plant Safety, Confined Space Entry, Chemical Hazards & Emergency Protocols 12.5 Pumps, Motors, Electrical Controls & Flow Measurement
1.2 Operator Certification, Experience Requirements & Reciprocity
Key Takeaways Explain This Topic AI
Missouri treatment certificates require 5 1/2 years of experience for Level A, 3 1/2 for B, 1 1/2 for C and 6 months for D; distribution requires 3 years for DS-III, 1 year for DS-II and 6 months for DS-I.
Each level caps how much experience may be equivalent: 2 years at Level A, 1 year at B and C, and all of it at Level D and DS-I.
A four-year related degree is worth exactly 2 years of equivalent experience, an associate degree 1 1/2 years, and an approved 45-contact-hour training course 1/2 year (maximum 1 1/2 years).
Every MoDNR drinking water and wastewater exam requires 70% to pass; most are 100 items, but Drinking Water D and Distribution System 1 are 50 items.
A failed candidate must wait not less than sixty (60) days to retest, and after three failures must complete department-approved training before re-examination.
Last updated: September 2026
To ensure that all individuals operating critical public water and wastewater infrastructure possess verified competencies, the Missouri Department of Natural Resources has established clear prerequisite criteria. Applicants must satisfy baseline education, document verified hands-on operational experience, and pass rigorous state examinations before receiving an active license under 10 CSR 60-14 (drinking water) or 10 CSR 20-9 (wastewater).
Baseline Eligibility Prerequisites
Age: the minimum age for certification is eighteen (18) years .
Education: the requirement is not an absolute high school diploma. Under 10 CSR 20-9.020 , a wastewater applicant must satisfy one of the following: a high school diploma or GED; or department-approved training appropriate to wastewater treatment; or six (6) months of experience. Candidates who assume a diploma is mandatory in every case get this wrong.
Experience Requirements by Classification Level
Experience is the backbone of Missouri's licensing system, and each level specifies both a total requirement and a cap on how much of that total may be satisfied by equivalent (educational or training) credit rather than actual plant time.
Water treatment and wastewater treatment (10 CSR 60-14.020 Table 1; 10 CSR 20-9.020 Table 1)
- Certificate level Minimum actual and equivalent experience Maximum that may be equivalent
- A 5 1/2 years of operating experience 2 years
- B 3 1/2 years of operating experience 1 year
- C 1 1/2 years of operating experience 1 year
- D 6 months of operating experience all of it may be equivalent
Both the drinking water rule and the wastewater rule use the same four figures, so one table serves both disciplines. The half-years matter: Level A is five and one-half years, not five.
Distribution certificates (10 CSR 60-14.020 Table 2)
- Certificate level Minimum actual and equivalent experience Maximum that may be equivalent
- DS-III 3 years of water distribution system operating experience 1 year
- DS-II 1 year of water distribution system operating experience 6 months
- DS-I 6 months of distribution system operating experience all of it may be equivalent
Note that distribution requires less experience than treatment at every tier — DS-III tops out at 3 years where treatment Level A demands 5 1/2.
Defining Qualifying Operational Experience
The rules define operating experience as the skills and knowledge acquired from making or acting upon day-to-day process control and system integrity decisions , rather than from textbook study. The applicant must have actually operated the facility, including the subsequent adjustment of chemical feeders.
What qualifies
Direct, hands-on performance or immediate supervision of treatment process operations.
Adjusting chemical feed pumps, recalibrating chlorinators, changing gas cylinders.
Operating clarifier drives, sludge pumps, blowers, backwash valves and filter consoles.
Process laboratory testing (jar tests, chlorine residual, pH, DO, BOD5, TSS, settleometer) and interpreting the data to adjust the process .
Calculating operational metrics such as chemical dosage, mean cell residence time, food-to-microorganism ratio and filter loading rates.
Isolating mains, operating hydrants, flushing grids and collecting compliance bacteriological samples.
What does not qualify
Administrative, clerical, billing or accounting duties. The rule specifically notes that a superintendent or manager, board members and councilpersons do not automatically receive operating credit.
Groundskeeping, mowing, snow removal and painting of non-process structures.
Fleet or building maintenance unrelated to unit processes.
Engineering consulting or drafting without continuous on-site operational responsibility.
Two partial-credit provisions are worth memorising: certain related roles receive one-quarter (1/4) credit for actual employment time up to a maximum allowance, and plumbers are credited with distribution experience only — never treatment experience.
Equivalent Experience: What Education and Training Are Worth
10 CSR 60-14.020 Table 3 fixes the exchange rate. These are hard numbers, not approximations:
- Qualification Equivalent experience granted
- Graduation from an approved one-year certificate program in water/wastewater technology 1 year
College-level course in a related field (chemical, biological, environmental or allied science, or public health), grade C or better 1 month per 3 semester hours , maximum 6 months
Two-year associate degree in a related field 1 1/2 years
Four-year degree or higher in a related field, or a civil/mechanical/electrical or related engineering degree 2 years
Department-approved water treatment training course of at least 45 contact hours (4.5 CEUs) 1/2 year per course, maximum credit 1 1/2 years
Department-approved water distribution training course of at least 35 contact hours (3.5 CEUs) 1/2 year per course, maximum credit 1 year
Department-approved correspondence course of at least 45 contact hours (4.5 CEUs) 1/2 year per course, maximum credit 1 1/2 years
For multi-day courses, attendance of at least eighty percent (80%) of the course hours is required to receive credit .
The ceiling on substitution is not a blanket percentage. It is the per-level "maximum that may be equivalent" column above. A four-year environmental engineering degree is worth exactly 2 years of equivalent experience — and for a Level A certificate, 2 years is also the cap, so the applicant must still document 3 1/2 years of actual operating experience to reach the 5 1/2-year total.
Examination Administration, Scoring and Retakes
Current exams (through December 31, 2026). MoDNR administers its own examinations, delivered as computer-based tests through PSI . The candidate mails a completed application (Form MO 780-1089) to the department and should allow 30 days for processing ; the rule also requires the application to be submitted at least thirty (30) days prior to the examination date . PSI then emails scheduling instructions.
Delivery options: a PSI test centre , or remote online proctoring from the candidate's own computer. Both allow a non-programmable calculator ; the math formula sheet is available electronically under the resource tab during the exam.
Rescheduling: once scheduled, 48 hours' notice is required to reschedule.
Exam length: most exams are 100 multiple-choice single-answer items worth 100 points . Two are 50 items : Drinking Water D and Distribution System 1 .
Passing score: seventy percent (70%) on every drinking water and wastewater exam.
Frequency: the department holds examinations not less than four (4) times annually .
Retakes. A candidate who fails must wait not less than sixty (60) days before re-examination, and must file a new application with the associated fee for each attempt. A candidate who fails the examination three (3) times must obtain the applicable department-approved treatment or distribution training before any further re-examination .
Exam content. The rules themselves list the subject matter. Drinking water examinations contain questions on the Missouri public drinking water rules, general water systems knowledge, water quality, applied mathematics, chemistry, biology, environmental sciences, laboratory testing procedures, hydraulics and pumping systems — with backflow prevention and distribution system operation added for distribution exams. Wastewater examinations cover the Missouri wastewater regulations, general wastewater systems knowledge, water quality, applied mathematics, chemistry, laboratory testing procedures as applied to wastewater treatment, hydraulics, pumps and operation.
The January 1, 2027 change. MoDNR is transitioning to standardized exams from Water Professionals International (WPI) , using the state's existing WPI computer-based testing contract. Those exams will be 100 scored questions plus 10 unscored sample questions scattered throughout. Each Missouri certificate maps to a WPI "need to know" (NTK) criteria document — Drinking Water A to Water Treatment Operator Class 4, Drinking Water D to Class 1, Distribution System 3 to Water Distribution Class 4, and so on, because WPI numbers its classes 1 (lowest) to 4 (highest), the reverse of Missouri's letter scheme. CAFO exams are excluded from the transition because no standardized version exists.
Fees
Fees differ between the two disciplines, which is a common trap.
- Fee Drinking water (10 CSR 60-16.040) Wastewater (10 CSR 20-9.020)
- Examination application $50 $20 application + $25 certification = $45
- Each retake $50 new application fee per repeat examination
- Certification by reciprocity $75 $40 application + $25 certificate
- Renewal (each certificate, every 3 years) $60 $45
- Late fee after expiration $37.50 per month, up to $75 $10 per month, up to $20
All certification and examination fees are nonrefundable and nontransferable.
Reciprocity for Out-of-State Operators
Certification by reciprocity may be granted without examination to a person who holds a valid certificate attained by examination in any state, territory or possession of the United States, or other authorized certifying authority, provided the requirements for that certification are equivalent to Missouri's.
Examination origin is mandatory. A grandparented certificate, or any certificate awarded without an examination, is not eligible for reciprocity.
Experience. The applicant must have actual water treatment or distribution experience (or wastewater treatment experience) at a public system appropriate to the certificate for which reciprocity is requested.
Employment and timing. The applicant must obtain employment with a Missouri system and make application for reciprocity within one hundred eighty (180) days after beginning that employment . The department's letter of intent to issue certification is likewise valid for 180 days ; after that the applicant must reapply.
Disqualification. Certification by reciprocity or examination is not available to an individual whose certificate has been suspended or revoked, and an applicant in that position must wait until one (1) year has elapsed following the suspension or revocation.