Study guide

16.3 Sensitivity Labels & Policies

Microsoft 365 Administrator Expert MS-102

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 MS-102 Exam Facts & Blueprint 1.2 Registration, Retake & Renewal 1.3 Study Strategy & Using This Guide

2 Tenant Setup, Domains & Org Settings

2.1 Creating a Microsoft 365 Tenant 2.2 Implementing and Managing Domains 2.3 Configuring Org Settings: Security, Privacy & Profile

3 Service Health, Network & Software Updates

3.1 Monitoring Service Health & Notifications 3.2 Network Connectivity Insights 3.3 Configuring & Monitoring Software Updates

4 Adoption, Usage & Microsoft 365 Backup

4.1 Monitoring Adoption & Usage 4.2 Configuring & Managing Microsoft 365 Backup

5 Users, Contacts, Groups & Shared Mailboxes

5.1 Creating & Managing Users Including External Users 5.2 Creating & Managing Contacts 5.3 Managing Microsoft 365 Groups & Shared Mailboxes

6 Licensing & Bulk User Management

6.1 Managing & Monitoring Microsoft 365 Licenses 6.2 Bulk User Management with Graph & Entra PowerShell

7 Roles, Admin Units & Privileged Identity Management

7.1 Implementing & Managing Roles in M365 & Entra ID 7.2 Managing Permissions for Defender XDR, Purview & Workloads 7.3 Managing Delegation with Administrative Units 7.4 Managing Entra ID Roles in PIM

8 Identity Synchronization with Entra Connect

8.1 Preparing for Identity Synchronization & IdFix 8.2 Directory Sync with Entra Connect Sync & Cloud Sync 8.3 Monitoring Sync with Entra Connect Health 8.4 Troubleshooting Synchronization

9 Authentication, SSPR & Password Protection

9.1 Implementing & Managing Authentication Methods 9.2 Self-Service Password Reset (SSPR) 9.3 Microsoft Entra Password Protection 9.4 Investigating & Resolving Authentication Issues

10 Identity Protection, Conditional Access & MFA

10.1 Planning for Identity Protection 10.2 Implementing Entra Identity Protection 10.3 Planning & Implementing Conditional Access Policies 10.4 Managing MFA with Conditional Access

11 Defender XDR Posture, Incidents & Threat Intelligence

11.1 Security Exposure Management & Secure Score 11.2 Incidents, Alerts & Advanced Hunting 11.3 Reviewing Defender XDR Reports 11.4 Defender Threat Intelligence

12 Defender for Office 365: Policies, Alerts & Investigation

12.1 Threat Policies & Rules in Defender for Office 365 12.2 Configuring Alert Policies 12.3 Investigating & Responding to Email Threats

13 Attack Simulation & Restricted Entities

13.1 Managing Attack Simulations & Training 13.2 Managing Restricted Entities & Blocked Users

14 Defender for Endpoint

14.1 Onboarding Devices to Defender for Endpoint 14.2 Configuring Endpoint Settings 14.3 Defender Vulnerability Management Dashboard

15 Defender for Cloud Apps

15.1 Configuring the App Connector for Microsoft 365 15.2 Defender for Cloud Apps Policies & Alerts 15.3 Interpreting the Activity Log 15.4 Cloud App Discovery

16 Purview Information Protection & Data Lifecycle

16.1 Sensitive Information Types 16.2 Retention Labels & Policies 16.3 Sensitivity Labels & Policies 16.4 Monitoring Label Usage: Content & Activity Explorer

17 Purview Data Loss Prevention

17.1 DLP Policies for Microsoft 365 Workloads 17.2 Configuring Endpoint DLP 17.3 Reviewing & Responding to DLP Alerts, Events & Reports

18 Final Review & Exam Strategy

18.1 Exam-Day Strategy & Question Handling 18.2 Final Review Checklist & Next Steps

16.3 Sensitivity Labels & Policies

Key Takeaways Explain This Topic AI

Sensitivity labels mark and protect content based on its sensitivity (e.g., Public, Internal, Confidential, Highly Confidential) and can apply encryption, content markings, and site/group protection

A sensitivity label can apply encryption (who can open and with what rights), content markings (watermarks, headers, footers), and Microsoft 365 Group/Team/SharePoint site protection

Labels are created in Information protection > Labels and published via a sensitivity label policy that controls which users/groups see them, the default label, mandatory labeling, and justification for removal or change

Service-side auto-labeling runs in the background for Exchange, SharePoint, and OneDrive based on SITs or trainable classifiers; client-side auto-labeling recommends labels in Word, Excel, PowerPoint, and Outlook

Sensitivity labels govern protection and classification; retention labels govern keep/delete lifecycle — the two are independent and can coexist on the same item

Last updated: August 2026

Quick Answer: A sensitivity label in Microsoft Purview classifies content by its sensitivity (Public, Internal, Confidential, Highly Confidential) and can apply protection: encryption that controls who can open the content and what they can do with it, content markings such as watermarks and headers, and site/group protection for Microsoft 365 Groups, Teams, and SharePoint sites. Labels are created in the Purview compliance portal and published to users via a sensitivity label policy.

What a Sensitivity Label Can Do

A sensitivity label can apply several protections, each of which you configure when you create the label in Information protection > Labels :

Encryption — controls who can open the content and what rights they have (view, edit, print, copy, forward). You can let the user assign permissions, or you can pre-define permissions (admin-defined). Encryption applies to files and emails.

Content markings — apply a watermark, header, or footer to documents and emails. Markings are visible reminders of the content's classification and travel with the content.

Site and group protection — when applied to a Microsoft 365 Group, Microsoft Team, or SharePoint site, the label controls external sharing, external user access, and device access policies. This is configured on the Site and group settings page of the label.

Label-downgrading justifications — when a user replaces a higher-sensitivity label with a lower-sensitivity one, Purview can require a justification reason, which is logged.

Not every label applies every protection. A typical tiered taxonomy is Public (no protection), Internal (no encryption, maybe a footer), Confidential (encryption to internal users, watermark), Highly Confidential (encryption to a named group, restricted rights, watermark). The label order in the policy defines the sensitivity rank from least to most sensitive.

Creating and Publishing Labels

Labels are created in the Purview compliance portal under Information protection > Labels > + Create a label . After you create the label, it has no effect until you publish it through a sensitivity label policy . The policy controls:

Which users and groups see the labels — publish to all users, or to specific users or mail-enabled security groups.

Default label — the label applied automatically to new documents and emails when the user does not choose one.

Mandatory labeling — whether users must apply a label before saving or sending. When mandatory, a user cannot save a document or send an email without a label.

Justification for removal or downgrade — whether users must provide a reason to remove or lower a label.

Provide users with a link to a custom help page — directs users to internal labeling guidance.

A single label policy can publish multiple labels, and a label can be published by only one policy at a time. Plan the label taxonomy first, then plan the policies that publish those labels to the right audiences.

Auto-Labeling

Purview offers two distinct auto-labeling mechanisms:

Service-Side Auto-Labeling

Service-side auto-labeling runs in the Purview service in the background, without relying on the Office client. You configure it under Information protection > Auto-labeling policies . The policy applies labels to content stored in Exchange, SharePoint, and OneDrive based on conditions:

Sensitive info types — content that matches a SIT (e.g., a credit card SIT triggers a Highly Confidential label)

Trainable classifiers — content that matches a trainable classifier such as Source Code or Legal documents

Service-side auto-labeling applies to content at rest and in transit through the service, including content uploaded to SharePoint by users who are not the original author. It is the recommended approach for large-scale labeling because it does not depend on endpoint configuration.

Client-Side Auto-Labeling

Client-side auto-labeling runs inside the Office apps (Word, Excel, PowerPoint, Outlook). When a user authors content that matches a SIT or trainable classifier configured in the label, Office recommends or automatically applies the label. You configure this in the label itself (the Auto-labeling for Office apps settings), not as a separate policy.

Client-side auto-labeling depends on the user's Office client supporting the feature and having the label policy deployed. It is best for in-the-moment authoring guidance; service-side is best for at-rest coverage. Most enterprises use both together.

Sensitivity vs Retention Labels

The distinction from retention labels (covered in 16.2) is a common exam trap:

  • Sensitivity label Retention label
  • Purpose Protection and classification Lifecycle (keep/delete)
  • Settings Encryption, content markings, site/group protection Retain-then-delete, delete-only, retain-only
  • Publishing Sensitivity label policy Retention label policy or auto-apply retention label policy

Coexistence Can coexist with a retention label on the same item Can coexist with a sensitivity label on the same item

An item can have both a sensitivity label (e.g., Highly Confidential with encryption) and a retention label (e.g., Retain 7 years then delete). The two operate independently.

Exam Tip

The MS-102 exam frequently tests the auto-labeling split: service-side runs in the background on Exchange/SharePoint/OneDrive based on SITs or trainable classifiers, while client-side runs in Word/Excel/PowerPoint/Outlook and recommends labels. Also know the three protections a label can apply (encryption, content markings, site/group protection) and the policy settings (default label, mandatory labeling, justification). A scenario where a user must give a reason to downgrade from Confidential to Internal maps to the justification-for-removal-or-change policy setting.