Study guide

7.2 Single Proportionate Measurement Methods

Mississippi Professional Surveyor PS

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Mississippi Section Exam, Licensure Law & the Board

1.1 The Mississippi Section PS Exam: Format, Subjects & Study Plan 1.2 Title 73, Chapter 13 After HB 1150: Definitions, the Board & Part 901 Chapters 1–4 1.3 Qualifications, Surveyor Intern Enrollment, Examinations & Comity 1.4 Certificate of Authority for Surveying Firms 1.5 Continuing Professional Competency, Renewal, Retired Status & Reinstatement

2 Chapter 2: Conduct, Seals, Discipline & Unlicensed Practice

2.1 Code of Professional Conduct & Solicitation of Work (Rule 6.3) 2.2 Seals, Signatures & Responsible Charge 2.3 Disciplinary Grounds, Hearings, Sanctions & Appeals 2.4 Unlicensed Practice, Exemptions, Right of Entry & County Surveyors

3 Chapter 3: Mississippi Standards of Practice: Scope, Classification & Accuracy

3.1 From Rule 21 to Chapter 7: Types of Surveys and Attestation 3.2 Survey Classification: Class A, B & C (and the Retired Class D) 3.3 Unadjusted Closure & Angular Closure 3.4 Bearing, Distance, Elevation & Improvement Tolerances; GNSS Quality Control

4 Chapter 4: Mississippi Standards of Practice: Plat Contents & Monumentation

4.1 Plat Media, Scale, Classification, Basis of Bearings & Certification 4.2 Monuments, Alternate Monuments, Exceptions & Witness Corners 4.3 Discrepancies, Occupation, Encroachments, Rights-of-Way & Descriptions

5 Chapter 5: The Public Land Survey System in Mississippi: Meridians, Cessions & Private Claims

5.1 The Five Principal Meridians Governing Mississippi Surveys 5.2 Indian Cessions, State Boundaries & the Original GLO Surveys 5.3 Colonial Grants, Private Land Claims & Ellicott's Line

6 Chapter 6: PLSS Township Subdivisions, Section Fractionalization & Retracements

6.1 Township Exterior Boundaries, Convergency of Meridians, and Section Breakdown 6.2 Section Subdivisions, Aliquot Parts, and Government Lots 6.3 Retracement Surveys, Original Evidence & the BLM Manual

7 Chapter 7: Lost Corner Restoration & Retracement in Mississippi

7.1 Existent, Obliterated & Lost Corners: Classification and Evidence 7.2 Single Proportionate Measurement Methods 7.3 Double Proportionate Measurement Methods

8 Chapter 8: Mississippi Boundary Law: Hierarchy of Calls & Deed Interpretation

8.1 The Hierarchy of Conflicting Calls & the Intent of the Parties 8.2 Senior Rights vs. Junior Rights in Overlapping Conveyances 8.3 Legal Description Types & Ambiguity Resolution

9 Chapter 9: Adverse Possession, Acquiescence, and Boundary Agreements in Mississippi

9.1 Adverse Possession under Miss. Code Ann. § 15-1-13 9.2 Boundary by Agreement, Acquiescence & Estoppel 9.3 The Surveyor's Role in Possession, Encroachment & Title Disputes

10 Chapter 10: Water Boundaries, Riparian Rights & Public Trust Tidelands in Mississippi

10.1 Non-Tidal Rivers & Streams: Bed Ownership, Public Waterways & Meander Lines 10.2 Accretion, Reliction, Erosion & Avulsion 10.3 Public Trust Tidelands & Mean High Water on the Mississippi Coast

11 Chapter 11: Easements, Rights-of-Way, and Sixteenth Section School Trust Lands

11.1 Easements: Types, Creation, Scope & What the Plat Must Show 11.2 Highway, County Road, Railroad & Utility Rights-of-Way 11.3 Sixteenth Section & Lieu Lands: School Trust Title, Classification & Surveys

12 Chapter 12: Geodetic Control, State Plane Coordinates & Professional Practice

12.1 The Mississippi Coordinate System (§§ 89-6-1 to -19): Zones, Parameters & Grid-to-Ground 12.2 GNSS Positioning in Mississippi: Rule 7.5(2), the GCGC RTN, CORS & Quality Control 12.3 Professional Liability, Survey Contracts & Expert Testimony

7.2 Single Proportionate Measurement Methods

Key Takeaways Explain This Topic AI

Single proportionate measurement is the BLM Manual's method for restoring a lost corner that lies on a line with two identified control corners, distributing excess or deficiency in one dimension based on original GLO record distances.

Single proportion applies to all lost interior quarter-section corners, lost quarter-section and section corners on township exteriors (standard parallels, guide meridians, township latitudinal lines, and range lines), and all lost corners on fractional section lines.

The mathematical formula for single proportion is: New Measured Segment Distance = Record Segment Distance * (Total Modern Measured Distance / Total Record Distance), which ensures that every unit of record distance expands or contracts by an identical scale factor.

On a regular interior section line where record was 40.00 ch (2,640.00 ft) west and 40.00 ch (2,640.00 ft) east (80.00 ch / 5,280.00 ft total) and modern measurement is 5,312.40 ft, the 32.40 ft excess is split equally, placing the restored quarter corner at 2,656.20 ft from each section corner.

On fractional closing lines abutting the north or west township boundaries, single proportion must reflect the original record imbalance (e.g., 40.00 ch regular vs. 38.50 ch fractional); placing the lost quarter corner at the modern arithmetic midpoint is a catastrophic surveying error.

Last updated: September 2026

Principles of Single Proportionate Measurement

When an exhaustive field search confirms that a PLSS corner is legally lost —meaning all physical marks, accessories, and reliable collateral evidence are gone beyond reasonable doubt—its position must be restored through mathematical proportionate measurement. Under the BLM Manual of Surveying Instructions , which Rule 7.3 directs Mississippi surveyors to follow, the restoration method depends on whether the corner is controlled along one line or in two directions.

Single proportionate measurement is applied to restore a lost corner whose position is constrained along a single line between two identified controlling corners (existent or obliterated corners). The fundamental principle of proportionate measurement is:

The Principle of Relative Proportion: The difference between the modern measured total distance and the original record total distance (excess or deficiency) is distributed among the intermediate segments in direct proportion to their original record lengths. Neither the original Gunter's chain nor modern electronic distance meters (EDM/GNSS) are assumed to be mathematically perfect; rather, every chain or foot of record distance is expanded or contracted by an identical scale factor.

Scope of Application: When Single Proportion Governs

Under the Manual, single proportionate measurement restores these lost corners:

Quarter-Section Corners on Interior Section Lines : All lost quarter corners on interior north-south and east-west section lines.

Corners on Township Exterior Boundaries : All lost quarter-section corners and section corners on range lines and latitudinal township exterior lines.

Corners on Standard Parallels and Correction Lines : All lost standard section corners, standard quarter-section corners, and standard township corners along a Standard Parallel or Base Line.

Corners on Guide Meridians : All lost section and quarter-section corners along established Guide Meridians.

Corners on Fractional Section Lines : All lost quarter-section corners and sixteenth corners on fractional closing lines abutting the north and west boundaries of a township, or lines abutting meandered rivers and private land claims.

Closing Corners on Township Exteriors : A lost closing corner (CC) is re-established along the line closed upon (such as a standard parallel) by single proportion between the nearest identified corners on that line, constrained to the intersection of the closing meridional line. +-------------------------------------------------------------------------+

  • | SUMMARY OF SINGLE PROPORTION APPLICATIONS |
  • +-------------------------------------------------------------------------+
  • | Line / Boundary Type | Controlling Termini Corners |
  • +----------------------------------+--------------------------------------+
  • | Interior East-West Section Line | Existent/Obliterated Section Corners |
  • | (Quarter-Section Corner) | to the East and West |
  • +----------------------------------+--------------------------------------+
  • | Interior North-South Section Line| Existent/Obliterated Section Corners |
  • | (Quarter-Section Corner) | to the North and South |
  • +----------------------------------+--------------------------------------+
  • | Township Range Line | Existent/Obliterated Section or |
  • | (Section or Quarter Corner) | Township Corners on Range Line |
  • +----------------------------------+--------------------------------------+
  • | Standard Parallel | Existent/Obliterated Standard Corners|
  • | (Standard Section or 1/4 Corner) | along the Parallel (East and West) |
  • +----------------------------------+--------------------------------------+
  • | Fractional Closing Tier Line | Interior Section Corner and Township |
  • | (Section 6, 7, 18, 19, 30, 31) | Exterior Closing Corner |
  • +----------------------------------+--------------------------------------+
  • The Mathematical Formula for Single Proportion

Let:

R 1 , R 2 , … , R n R_1, R_2, \dots, R_n R 1 ​ , R 2 ​ , … , R n ​ = Original GLO record lengths of individual segments.

R total = ∑ R i R_{\text{total}} = \sum R_i R total ​ = ∑ R i ​ = Total GLO record distance between the two controlling corners.

M total M_{\text{total}} M total ​ = Modern measured horizontal ground distance between the two controlling corners.

M i M_i M i ​ = Modern proportionate distance to be laid off for segment i i i .

The universal single proportion equation is: M i = R i × ( M total R total ) M_i = R_i \times \left( \frac{M_{\text{total}}}{R_{\text{total}}} \right) M i ​ = R i ​ × ( R total ​ M total ​ ​ )

Alternatively, defining the Proportion Factor (Scale Ratio) k k k : k = M total R total k = \frac{M_{\text{total}}}{R_{\text{total}}} k = R total ​ M total ​ ​ M i = R i × k M_i = R_i \times k M i ​ = R i ​ × k

The total excess or deficiency Δ D = M total − R total \Delta D = M_{\text{total}} - R_{\text{total}} Δ D = M total ​ − R total ​ is distributed across each segment: Δ d i = Δ D × ( R i R total ) \Delta d_i = \Delta D \times \left( \frac{R_i}{R_{\text{total}}} \right) Δ d i ​ = Δ D × ( R total ​ R i ​ ​ ) M i = R i + Δ d i M_i = R_i + \Delta d_i M i ​ = R i ​ + Δ d i ​

Worked Calculation 1: Regular Interior Section Line

A Mississippi surveyor is retracing the east-west section line between Section 14 and Section 23. The quarter-section corner common to Sections 14 and 23 is determined to be lost . Sec. Cor. Lost 1/4 Cor. Sec. Cor.

  • (14, 15, 22, 23) (14 | 23) (13, 14, 23, 24)
  • +-------------------------------------------O-------------------------------------+
  • | <-------- Record: 40.00 ch -------------> | <-------- Record: 40.00 ch --------> |
  • | (2,640.00 ft) | (2,640.00 ft) |
  • | |
  • | <====================== Measured: 5,312.40 ft ================================> |
  • | <------ Modern: 2,656.20 ft ------------> | <------ Modern: 2,656.20 ft --------> |
  • Step 1: Compile Original GLO Field Note Records

West Section Corner (14, 15, 22, 23) to Quarter Corner: R 1 = 40.00 chains = 2 , 640.00 ft R_1 = 40.00\text{ chains} = 2,640.00\text{ ft} R 1 ​ = 40.00 chains = 2 , 640.00 ft

Quarter Corner to East Section Corner (13, 14, 23, 24): R 2 = 40.00 chains = 2 , 640.00 ft R_2 = 40.00\text{ chains} = 2,640.00\text{ ft} R 2 ​ = 40.00 chains = 2 , 640.00 ft

Total Record Distance: R total = 80.00 chains = 5 , 280.00 ft R_{\text{total}} = 80.00\text{ chains} = 5,280.00\text{ ft} R total ​ = 80.00 chains = 5 , 280.00 ft

Step 2: Measure Modern Distance Between Controlling Corners

Controlling corners recovered: West Section Corner and East Section Corner are both existent.

Modern measured horizontal distance: M total = 5 , 312.40 ft M_{\text{total}} = 5,312.40\text{ ft} M total ​ = 5 , 312.40 ft

Step 3: Determine Excess or Deficiency Δ D = 5 , 312.40 ft − 5 , 280.00 ft = + 32.40 ft ( an excess of 32.40 ft ) \Delta D = 5,312.40\text{ ft} - 5,280.00\text{ ft} = +32.40\text{ ft} \quad (\text{an excess of } 32.40\text{ ft}) Δ D = 5 , 312.40 ft − 5 , 280.00 ft = + 32.40 ft ( an excess of 32.40 ft )

Step 4: Calculate the Proportion Factor k = M total R total = 5 , 312.40 5 , 280.00 = 1.00613636... k = \frac{M_{\text{total}}}{R_{\text{total}}} = \frac{5,312.40}{5,280.00} = 1.00613636... k = R total ​ M total ​ ​ = 5 , 280.00 5 , 312.40 ​ = 1.00613636...

Step 5: Compute Segment Lengths

West Segment (West Section Corner to Quarter Corner): M 1 = 2 , 640.00 × 1.00613636 = 2 , 656.20 ft ( 40.2455 chains ) M_1 = 2,640.00 \times 1.00613636 = 2,656.20\text{ ft} \quad (40.2455\text{ chains}) M 1 ​ = 2 , 640.00 × 1.00613636 = 2 , 656.20 ft ( 40.2455 chains )

East Segment (Quarter Corner to East Section Corner): M 2 = 2 , 640.00 × 1.00613636 = 2 , 656.20 ft ( 40.2455 chains ) M_2 = 2,640.00 \times 1.00613636 = 2,656.20\text{ ft} \quad (40.2455\text{ chains}) M 2 ​ = 2 , 640.00 × 1.00613636 = 2 , 656.20 ft ( 40.2455 chains )

Check: 2 , 656.20 ft + 2 , 656.20 ft = 5 , 312.40 ft 2,656.20\text{ ft} + 2,656.20\text{ ft} = 5,312.40\text{ ft} 2 , 656.20 ft + 2 , 656.20 ft = 5 , 312.40 ft . The math closes exactly.

Step 6: Field Alignment

The lost quarter-section corner is established on the straight line connecting the West and East section corners at a distance of 2,656.20 feet from each section corner. Because the record segments were equal (40.00 ch each), the 32.40-foot excess is divided equally (16.20 feet added to each half-mile).

Worked Calculation 2: Fractional Closing Section Line

A critical exam scenario involves restoring a lost quarter corner along a fractional closing tier (e.g., Sections 1–6 along the north township boundary, or Sections 6, 7, 18, 19, 30, 31 along the west range line).

Consider the latitudinal line between Section 18 and Section 19 , closing west upon the Range Line. The quarter corner between Section 18 and Section 19 is lost . RANGE LINE INTERIOR

Sec. Cor. Lost 1/4 Cor. Sec. Cor.

  • (13, 18, 19, 24) (18 | 19) (17, 18, 19, 20)
  • +-------------------------------------------O-------------------------------------+
  • | <-------- Record: 38.50 ch -------------> | <-------- Record: 40.00 ch --------> |
  • | (2,541.00 ft) | (2,640.00 ft) |
  • | |
  • | <====================== Measured: 5,210.00 ft ================================> |
  • | <------ Modern: 2,555.22 ft ------------> | <------ Modern: 2,654.78 ft --------> |
  • Step 1: Compile Original GLO Field Note Records

Under original GLO instructions, the deputy surveyor ran west from the interior section corner, set the quarter-section corner at exactly 40.00 chains , and closed on the west range line, throwing all excess or deficiency into the western fractional half-mile:

Interior Section Corner (17, 18, 19, 20) to Quarter Corner: R East = 40.00 chains = 2 , 640.00 ft R_{\text{East}} = 40.00\text{ chains} = 2,640.00\text{ ft} R East ​ = 40.00 chains = 2 , 640.00 ft

Quarter Corner to West Range Line Corner (13, 18, 19, 24): R West = 38.50 chains = 2 , 541.00 ft R_{\text{West}} = 38.50\text{ chains} = 2,541.00\text{ ft} R West ​ = 38.50 chains = 2 , 541.00 ft

Total Record Distance: R total = 40.00 + 38.50 = 78.50 chains = 5 , 181.00 ft R_{\text{total}} = 40.00 + 38.50 = 78.50\text{ chains} = 5,181.00\text{ ft} R total ​ = 40.00 + 38.50 = 78.50 chains = 5 , 181.00 ft

Step 2: Measure Modern Distance Between Controlling Corners

Controlling corners recovered: Interior Section Corner (existent) and Range Line Section Corner (existent).

Modern measured horizontal distance: M total = 5 , 210.00 ft M_{\text{total}} = 5,210.00\text{ ft} M total ​ = 5 , 210.00 ft

Step 3: Determine Excess or Deficiency Δ D = 5 , 210.00 ft − 5 , 181.00 ft = + 29.00 ft \Delta D = 5,210.00\text{ ft} - 5,181.00\text{ ft} = +29.00\text{ ft} Δ D = 5 , 210.00 ft − 5 , 181.00 ft = + 29.00 ft

Step 4: Calculate the Proportion Factor k = M total R total = 5 , 210.00 5 , 181.00 ≈ 1.005597375 k = \frac{M_{\text{total}}}{R_{\text{total}}} = \frac{5,210.00}{5,181.00} \approx 1.005597375 k = R total ​ M total ​ ​ = 5 , 181.00 5 , 210.00 ​ ≈ 1.005597375

Step 5: Compute Proportional Segment Lengths

East Segment (Regular Half-Mile) : M East = 2 , 640.00 × 1.005597375 = 2 , 654.78 ft ( 40.2239 chains ) M_{\text{East}} = 2,640.00 \times 1.005597375 = 2,654.78\text{ ft} \quad (40.2239\text{ chains}) M East ​ = 2 , 640.00 × 1.005597375 = 2 , 654.78 ft ( 40.2239 chains )

Excess absorbed: 2 , 654.78 − 2 , 640.00 = + 14.78 ft 2,654.78 - 2,640.00 = +14.78\text{ ft} 2 , 654.78 − 2 , 640.00 = + 14.78 ft

West Segment (Fractional Half-Mile) : M West = 2 , 541.00 × 1.005597375 = 2 , 555.22 ft ( 38.7155 chains ) M_{\text{West}} = 2,541.00 \times 1.005597375 = 2,555.22\text{ ft} \quad (38.7155\text{ chains}) M West ​ = 2 , 541.00 × 1.005597375 = 2 , 555.22 ft ( 38.7155 chains )

Excess absorbed: 2 , 555.22 − 2 , 541.00 = + 14.22 ft 2,555.22 - 2,541.00 = +14.22\text{ ft} 2 , 555.22 − 2 , 541.00 = + 14.22 ft

Check Sum : 2 , 654.78 ft + 2 , 555.22 ft = 5 , 210.00 ft 2,654.78\text{ ft} + 2,555.22\text{ ft} = 5,210.00\text{ ft} 2 , 654.78 ft + 2 , 555.22 ft = 5 , 210.00 ft .

Check Excess : 14.78 ft + 14.22 ft = 29.00 ft 14.78\text{ ft} + 14.22\text{ ft} = 29.00\text{ ft} 14.78 ft + 14.22 ft = 29.00 ft .

The "Midpoint Fallacy" on Fractional Lines

Notice the vital legal lesson:

If a surveyor mistakenly placed the quarter corner at the arithmetic midpoint ( 5 , 210.00 / 2 = 2 , 605.00 ft 5,210.00 / 2 = 2,605.00\text{ ft} 5 , 210.00/2 = 2 , 605.00 ft ), the East segment would be assigned 2,605.00 ft instead of 2,654.78 ft—an error of 49.78 feet !

If a surveyor mistakenly held the original record 40.00 chains (2,640.00 ft) from the interior corner and threw all 29.00 feet of excess into the west half, the West segment would be assigned 2,570.00 ft instead of 2,555.22 ft—an error of 14.78 feet !

Under the Manual, both segments are proportioned according to their record lengths, preserving the original ratio of 40.00 chains to 38.50 chains across the modern measured distance.

Single Proportion on Curved Lines: Standard Parallels

When restoring a lost corner on a Standard Parallel (Correction Line) or Base Line , alignment is constrained by the true parallel of latitude, which is a curved line on the earth's surface rather than a straight geodetic chord:

Distance : Distributed by single proportion along the parallel between the nearest existent or obliterated standard corners.

Alignment : The corner must be placed on the true parallel. For long distances between controlling corners, the surveyor must calculate and apply latitude offsets from the secant or tangent line run in the field, ensuring the restored corner falls on the true curve of the parallel.