Study guide

3.4 Bearing, Distance, Elevation & Improvement Tolerances; GNSS Quality Control

Mississippi Professional Surveyor PS

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Mississippi Section Exam, Licensure Law & the Board

1.1 The Mississippi Section PS Exam: Format, Subjects & Study Plan 1.2 Title 73, Chapter 13 After HB 1150: Definitions, the Board & Part 901 Chapters 1–4 1.3 Qualifications, Surveyor Intern Enrollment, Examinations & Comity 1.4 Certificate of Authority for Surveying Firms 1.5 Continuing Professional Competency, Renewal, Retired Status & Reinstatement

2 Chapter 2: Conduct, Seals, Discipline & Unlicensed Practice

2.1 Code of Professional Conduct & Solicitation of Work (Rule 6.3) 2.2 Seals, Signatures & Responsible Charge 2.3 Disciplinary Grounds, Hearings, Sanctions & Appeals 2.4 Unlicensed Practice, Exemptions, Right of Entry & County Surveyors

3 Chapter 3: Mississippi Standards of Practice: Scope, Classification & Accuracy

3.1 From Rule 21 to Chapter 7: Types of Surveys and Attestation 3.2 Survey Classification: Class A, B & C (and the Retired Class D) 3.3 Unadjusted Closure & Angular Closure 3.4 Bearing, Distance, Elevation & Improvement Tolerances; GNSS Quality Control

4 Chapter 4: Mississippi Standards of Practice: Plat Contents & Monumentation

4.1 Plat Media, Scale, Classification, Basis of Bearings & Certification 4.2 Monuments, Alternate Monuments, Exceptions & Witness Corners 4.3 Discrepancies, Occupation, Encroachments, Rights-of-Way & Descriptions

5 Chapter 5: The Public Land Survey System in Mississippi: Meridians, Cessions & Private Claims

5.1 The Five Principal Meridians Governing Mississippi Surveys 5.2 Indian Cessions, State Boundaries & the Original GLO Surveys 5.3 Colonial Grants, Private Land Claims & Ellicott's Line

6 Chapter 6: PLSS Township Subdivisions, Section Fractionalization & Retracements

6.1 Township Exterior Boundaries, Convergency of Meridians, and Section Breakdown 6.2 Section Subdivisions, Aliquot Parts, and Government Lots 6.3 Retracement Surveys, Original Evidence & the BLM Manual

7 Chapter 7: Lost Corner Restoration & Retracement in Mississippi

7.1 Existent, Obliterated & Lost Corners: Classification and Evidence 7.2 Single Proportionate Measurement Methods 7.3 Double Proportionate Measurement Methods

8 Chapter 8: Mississippi Boundary Law: Hierarchy of Calls & Deed Interpretation

8.1 The Hierarchy of Conflicting Calls & the Intent of the Parties 8.2 Senior Rights vs. Junior Rights in Overlapping Conveyances 8.3 Legal Description Types & Ambiguity Resolution

9 Chapter 9: Adverse Possession, Acquiescence, and Boundary Agreements in Mississippi

9.1 Adverse Possession under Miss. Code Ann. § 15-1-13 9.2 Boundary by Agreement, Acquiescence & Estoppel 9.3 The Surveyor's Role in Possession, Encroachment & Title Disputes

10 Chapter 10: Water Boundaries, Riparian Rights & Public Trust Tidelands in Mississippi

10.1 Non-Tidal Rivers & Streams: Bed Ownership, Public Waterways & Meander Lines 10.2 Accretion, Reliction, Erosion & Avulsion 10.3 Public Trust Tidelands & Mean High Water on the Mississippi Coast

11 Chapter 11: Easements, Rights-of-Way, and Sixteenth Section School Trust Lands

11.1 Easements: Types, Creation, Scope & What the Plat Must Show 11.2 Highway, County Road, Railroad & Utility Rights-of-Way 11.3 Sixteenth Section & Lieu Lands: School Trust Title, Classification & Surveys

12 Chapter 12: Geodetic Control, State Plane Coordinates & Professional Practice

12.1 The Mississippi Coordinate System (§§ 89-6-1 to -19): Zones, Parameters & Grid-to-Ground 12.2 GNSS Positioning in Mississippi: Rule 7.5(2), the GCGC RTN, CORS & Quality Control 12.3 Professional Liability, Survey Contracts & Expert Testimony

3.4 Bearing, Distance, Elevation & Improvement Tolerances; GNSS Quality Control

Key Takeaways Explain This Topic AI

Rule 7.5 bearing accuracy relative to source is ±1 minute for Class A, ±2 minutes for Class B, and ±3 minutes for Class C.

Rule 7.5 distance accuracy is 0.03 ft + 50 ppm for Class A, 0.05 ft + 100 ppm for Class B, and 0.07 ft + 150 ppm for Class C.

Elevations for boundaries controlled by tides, contours, or rivers must be accurate to ±0.05, ±0.10, and ±0.20 ft for Classes A, B, and C, based on NGVD or NAVD.

Improvement tie measurements must be accurate to ±0.1 ft for Class A, ±0.2 ft for Class B, and ±1.0 ft for Class C (Rule 7.5).

Whenever State Plane Coordinates are used, the plat must show the zone, datum, method, combined factor, convergence angle, and coordinates of at least two reference points (Rule 7.3).

Last updated: September 2026

The rest of the Rule 7.5 table

  • Parameter Class A Class B Class C Remarks in the rule
  • Accuracy of bearing ±1 min ±2 min ±3 min Relative to source
  • Accuracy of distances 0.03 ft + 50 ppm 0.05 ft + 100 ppm 0.07 ft + 150 ppm 100 ppm = 1:10,000

Elevations for boundaries controlled by tides, contours, rivers, etc. ±0.05 ft ±0.10 ft ±0.20 ft Based on NGVD/NAVD

  • Location of improvements (structures, paving, etc.; tie measurement) ±0.1 ft ±0.2 ft ±1.0 ft —
  • Distance accuracy: constant plus proportional

Each distance tolerance has two parts:

a constant (0.03, 0.05, or 0.07 ft), covering centering, prism-constant, and reading errors that do not grow with length; and

a proportional part in parts per million , covering errors that scale with distance, such as atmospheric and scale errors.

One ppm is 1/1,000,000 of the distance, or 0.001 ft per 1,000 ft. The rule's own remark gives a quick check: 100 ppm = 1:10,000.

Allowable error = constant + (ppm × 10⁻⁶ × distance)

  • Distance Class A (0.03 + 50 ppm) Class B (0.05 + 100 ppm) Class C (0.07 + 150 ppm)
  • 100 ft 0.035 ft 0.060 ft 0.085 ft
  • 500 ft 0.055 ft 0.100 ft 0.145 ft
  • 1,000 ft 0.080 ft 0.150 ft 0.220 ft
  • 2,000 ft 0.130 ft 0.250 ft 0.370 ft
  • 5,280 ft 0.294 ft 0.578 ft 0.862 ft

Example. On a 2,000-ft line in a Class B survey, the tolerance is 0.05 + (100 × 10⁻⁶ × 2,000) = 0.05 + 0.20 = 0.25 ft . Common wrong answers drop the constant (0.20 ft) or treat 100 ppm as 0.1 ft per foot.

Bearing accuracy relative to the source

Rule 7.3 requires every survey to be referenced to true north, grid north, or the record bearing of a well-defined, monumented line (Section 4.1). Rule 7.5 then requires bearings to be accurate relative to that source within ±1′ (A), ±2′ (B), or ±3′ (C). If the basis of bearings is a monumented subdivision line, the surveyor's bearing between those monuments must agree with the record within the class tolerance, and the rest of the survey is rotated consistently.

Elevations for water- and contour-controlled boundaries

Some boundaries are elevations, not lines on the ground: a tidal boundary at mean high water, a lake contour, or a reservoir take line. For these, Rule 7.5 requires the controlling elevation to be established to ±0.05 ft (A), ±0.10 ft (B), or ±0.20 ft (C), based on NGVD or NAVD . On flat marsh or a gently sloping lake shore, a small vertical error moves the boundary a long way horizontally. On a 1% slope, a 0.10-ft vertical error moves the contour about 10 ft. Mississippi's Public Trust Tidelands Act separately defines mean high water from a nineteen-year tidal epoch (Section 10.3).

Tie measurements to improvements

Rule 7.3 requires the plat to show visible encroachments with their extent and the location of permanent improvements relevant to the survey's purpose (Section 4.3). Rule 7.5 sets how accurately those ties must be measured: ±0.1 ft (A), ±0.2 ft (B), ±1.0 ft (C). A downtown building corner 0.15 ft from a line needs a Class A tie to report reliably which side of the line it is on.

GNSS and other radial methods (Rule 7.5(2))

"If radial survey methods such as global positioning systems (GPS) or other acceptable technologies or procedures are used to locate or establish points on the boundary survey, the Professional Surveyor shall apply acceptable surveying procedures and perform adequate quality control measures to ensure that the allowable positional accuracy and/or positional tolerance of such points are not exceeded."

The rule does not list specific PDOP limits, session lengths, or re-occupation times. It sets a performance standard , and the surveyor must be able to show how it was met. Accepted practice, drawn from National Geodetic Survey guidance for real-time and static GNSS, includes:

Checking into published control or a known monument before and after the work.

Taking redundant, independent observations of boundary points under different satellite geometry, with fixed solutions only.

Comparing repeat positions against the class tolerances above.

Tying to at least two control points so rotation and scale can be verified.

Keeping the field and processing records needed to show that quality control was performed.

  • (Section 12.2 covers the network and field practice in more depth.)
  • When State Plane Coordinates appear on a plat (Rule 7.3, item 18)

Whenever State Plane Coordinates are used in the process of conducting a survey , the plat must show:

  • the State Plane Coordinate System zone ;
  • the horizontal or vertical datum used;

the method used to derive the information (GNSS or conventional), including any published horizontal and vertical control points used;

  • a combined or correction factor ;
  • the convergence angle ; and

the coordinates of at least two reference points relevant to the survey.

If State Plane Coordinates are part of a written description, the description must include the same items (Rule 7.3, item 13). The Mississippi Coordinate System statute (§§ 89-6-1 to -19) adds its own conditions for recording coordinates (Section 12.1).