Study guide

3.1 From Rule 21 to Chapter 7: Types of Surveys and Attestation

Mississippi Professional Surveyor PS

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Mississippi Section Exam, Licensure Law & the Board

1.1 The Mississippi Section PS Exam: Format, Subjects & Study Plan 1.2 Title 73, Chapter 13 After HB 1150: Definitions, the Board & Part 901 Chapters 1–4 1.3 Qualifications, Surveyor Intern Enrollment, Examinations & Comity 1.4 Certificate of Authority for Surveying Firms 1.5 Continuing Professional Competency, Renewal, Retired Status & Reinstatement

2 Chapter 2: Conduct, Seals, Discipline & Unlicensed Practice

2.1 Code of Professional Conduct & Solicitation of Work (Rule 6.3) 2.2 Seals, Signatures & Responsible Charge 2.3 Disciplinary Grounds, Hearings, Sanctions & Appeals 2.4 Unlicensed Practice, Exemptions, Right of Entry & County Surveyors

3 Chapter 3: Mississippi Standards of Practice: Scope, Classification & Accuracy

3.1 From Rule 21 to Chapter 7: Types of Surveys and Attestation 3.2 Survey Classification: Class A, B & C (and the Retired Class D) 3.3 Unadjusted Closure & Angular Closure 3.4 Bearing, Distance, Elevation & Improvement Tolerances; GNSS Quality Control

4 Chapter 4: Mississippi Standards of Practice: Plat Contents & Monumentation

4.1 Plat Media, Scale, Classification, Basis of Bearings & Certification 4.2 Monuments, Alternate Monuments, Exceptions & Witness Corners 4.3 Discrepancies, Occupation, Encroachments, Rights-of-Way & Descriptions

5 Chapter 5: The Public Land Survey System in Mississippi: Meridians, Cessions & Private Claims

5.1 The Five Principal Meridians Governing Mississippi Surveys 5.2 Indian Cessions, State Boundaries & the Original GLO Surveys 5.3 Colonial Grants, Private Land Claims & Ellicott's Line

6 Chapter 6: PLSS Township Subdivisions, Section Fractionalization & Retracements

6.1 Township Exterior Boundaries, Convergency of Meridians, and Section Breakdown 6.2 Section Subdivisions, Aliquot Parts, and Government Lots 6.3 Retracement Surveys, Original Evidence & the BLM Manual

7 Chapter 7: Lost Corner Restoration & Retracement in Mississippi

7.1 Existent, Obliterated & Lost Corners: Classification and Evidence 7.2 Single Proportionate Measurement Methods 7.3 Double Proportionate Measurement Methods

8 Chapter 8: Mississippi Boundary Law: Hierarchy of Calls & Deed Interpretation

8.1 The Hierarchy of Conflicting Calls & the Intent of the Parties 8.2 Senior Rights vs. Junior Rights in Overlapping Conveyances 8.3 Legal Description Types & Ambiguity Resolution

9 Chapter 9: Adverse Possession, Acquiescence, and Boundary Agreements in Mississippi

9.1 Adverse Possession under Miss. Code Ann. § 15-1-13 9.2 Boundary by Agreement, Acquiescence & Estoppel 9.3 The Surveyor's Role in Possession, Encroachment & Title Disputes

10 Chapter 10: Water Boundaries, Riparian Rights & Public Trust Tidelands in Mississippi

10.1 Non-Tidal Rivers & Streams: Bed Ownership, Public Waterways & Meander Lines 10.2 Accretion, Reliction, Erosion & Avulsion 10.3 Public Trust Tidelands & Mean High Water on the Mississippi Coast

11 Chapter 11: Easements, Rights-of-Way, and Sixteenth Section School Trust Lands

11.1 Easements: Types, Creation, Scope & What the Plat Must Show 11.2 Highway, County Road, Railroad & Utility Rights-of-Way 11.3 Sixteenth Section & Lieu Lands: School Trust Title, Classification & Surveys

12 Chapter 12: Geodetic Control, State Plane Coordinates & Professional Practice

12.1 The Mississippi Coordinate System (§§ 89-6-1 to -19): Zones, Parameters & Grid-to-Ground 12.2 GNSS Positioning in Mississippi: Rule 7.5(2), the GCGC RTN, CORS & Quality Control 12.3 Professional Liability, Survey Contracts & Expert Testimony

3.1 From Rule 21 to Chapter 7: Types of Surveys and Attestation

Key Takeaways Explain This Topic AI

Mississippi's Minimum Standards of Land Surveying (Rule 21) governed plats from 1991 to June 30, 2005; revised Standards of Practice took effect July 1, 2005.

The Standards of Practice were recodified as Title 30, Part 901, Chapter 7 effective January 1, 2025, eliminating the former Class D.

Rule 7.1 treats boundary, route, easement, and lease surveys as one category whose primary purpose is determining the perimeter of a parcel.

Easements surveyed with a boundary, route, or lease survey need no monuments if adjacent to and parallel with the boundary lines, or if temporary (Rule 7.1).

Topographic, hydrographic, and control survey products may be sealed by the Professional Surveyor or Professional Engineer in responsible charge (Rule 7.2).

Last updated: September 2026

A short history of the Mississippi standards

The Board's "Surveying Standards" page traces four generations of rules. The Board still keeps a separate plat-review checklist for each era, because a plat is judged against the standards in force when it was made.

  • Period Standard Notes
  • 1991 – June 30, 2005 Minimum Standards of Land Surveying (Rule 21) Original statewide minimums
  • July 1, 2005 Standards of Practice for Surveying (revised Rule 21) Checklist revised

August 1, 2015 Third revision of Rule 21 Required a new checklist; four classes A–D with an accuracy table in Appendix B

April 15, 2017 Fourth revision Minor changes, same checklist

January 1, 2025 Part 901, Chapter 7 — Standards of Practice for Surveying Renumbered as Rules 7.1–7.6; Class D removed

November 21, 2025 Current Chapter 7 in the 2026 rules Restores the "definitive north arrow" requirement that the January 2025 text had dropped (Rule 7.3.3.a); authority cited as § 73-13-15

The Board published a side-by-side "2015 vs 2025 Standards of Practice Comparison" when it adopted Chapter 7. Section 3.2 lists the most-tested changes.

Statutory hooks. The Board adopts the standards under its § 73-13-15 rulemaking power. Other statutes rely on them. Section 89-6-13 makes coordinates a legal description only if the connection to the Mississippi Coordinate System follows chapter 89-6 and the Board's standards of practice. Section 73-13-49 requires new class-one railroad right-of-way acquisitions to be platted under the Standards of Practice. A licensee who fails to meet the standards "will be subject to appropriate disciplinary action by the Board" (Rule 7.6).

Rule 7.1: types of surveys

"Whenever a survey is performed, it shall comply with Statute, and the Standards of Practice." The rule defines:

Boundary, route, easement, and lease surveys as one category: surveys whose primary purpose includes determining the perimeter of a parcel or tract by establishing or re-establishing corners and monuments, to describe, plat, or divide the parcel and prepare a description.

Topographic survey : a survey of natural and select man-made features by ground measurements or remote sensing to determine their horizontal and vertical spatial relations.

Hydrographic survey : a survey mainly to determine data about bodies of water, such as depth and bottom configuration, current direction and force, water stages, and the location of fixed objects for survey and navigation.

Control survey : a survey providing horizontal or vertical position data to support or control subordinate surveying, mapping, or construction layout.

Easement monumentation exceptions. When an easement survey is performed in conjunction with a boundary, route, or lease survey:

(a) if the easement is adjacent to and parallel with the boundary line(s) created or re-established, the easement need not be monumented; and

(b) if the easement is temporary , monumentation is not required.

A stand-alone easement survey, such as a pipeline easement across several ownerships, is still a regulated boundary-type survey. Its corners are monumented under Rule 7.3 like any other.

Rule 7.2: attesting to quality and responsibility

The purpose of Rule 7.2 is to assure the client that the work was done under the direct Supervision of a licensee and meets the standards. Documentation must be sealed, signed, and dated by the licensee in responsible charge:

Survey Required product and sealer

Boundary, route, easement, lease A plat must be prepared, bearing the seal and signature of the Professional Surveyor in responsible charge and the date the seal was affixed

Topographic, hydrographic, or control survey for a client Any plat, map, or report that is the licensee's final product bears the seal, signature, and date of the PS or PE in responsible charge

Topographic, hydrographic, or control survey done by a licensee to obtain data for the licensee's own calculations or product The final product of the project bears the seal, signature, and date of the PS or PE in responsible charge

The 2015 text used the phrase "construction layout survey." The 2025 text substitutes control survey and adds the explicit requirement to date the seal.

The rest of Chapter 7 in one view

  • Rule Topic Where covered
  • 7.3 Nineteen plat requirements for boundary, route, easement, and lease surveys Chapter 4 and Section 3.4
  • 7.4 Classification of surveys (A, B, C) Section 3.2
  • 7.5 Minimum accuracy table plus GNSS/radial quality control Sections 3.3–3.4
  • 7.6 Enforcement This section

Item 19 of Rule 7.3 ties the chapter together. Regardless of survey type, a plat bears the licensee's name, address, date of field survey, signature, and seal , and that signature and seal certify that the survey meets the Standards of Practice . The rule adds that "other regulations including the Manual of Instructions for the Survey of U.S. Public Lands and all subdivision laws and regulations of the State of Mississippi Statutes shall be followed." That sentence brings BLM retracement practice (Chapters 6–7) into Mississippi's standards.

Minimums, not maximums

The standards set minimum requirements. A client may ask for more, such as an ALTA/NSPS Land Title Survey or tighter control, but nothing in the rules lets a client waive them. Rule 7.1 says "whenever a survey is performed, it shall comply." A surveyor who drops monumentation or closure checks because the client signed a waiver still violates Chapter 7 and faces discipline. A client who wants less than a survey can hire a non-survey service, such as a map sketch, but a licensee who performs a boundary survey must meet Chapter 7.