Study guide
3.3 Unadjusted Closure & Angular Closure
Mississippi Professional Surveyor PS
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The Mississippi Section Exam, Licensure Law & the Board
1.1 The Mississippi Section PS Exam: Format, Subjects & Study Plan 1.2 Title 73, Chapter 13 After HB 1150: Definitions, the Board & Part 901 Chapters 1–4 1.3 Qualifications, Surveyor Intern Enrollment, Examinations & Comity 1.4 Certificate of Authority for Surveying Firms 1.5 Continuing Professional Competency, Renewal, Retired Status & Reinstatement
2 Chapter 2: Conduct, Seals, Discipline & Unlicensed Practice
2.1 Code of Professional Conduct & Solicitation of Work (Rule 6.3) 2.2 Seals, Signatures & Responsible Charge 2.3 Disciplinary Grounds, Hearings, Sanctions & Appeals 2.4 Unlicensed Practice, Exemptions, Right of Entry & County Surveyors
3 Chapter 3: Mississippi Standards of Practice: Scope, Classification & Accuracy
3.1 From Rule 21 to Chapter 7: Types of Surveys and Attestation 3.2 Survey Classification: Class A, B & C (and the Retired Class D) 3.3 Unadjusted Closure & Angular Closure 3.4 Bearing, Distance, Elevation & Improvement Tolerances; GNSS Quality Control
4 Chapter 4: Mississippi Standards of Practice: Plat Contents & Monumentation
4.1 Plat Media, Scale, Classification, Basis of Bearings & Certification 4.2 Monuments, Alternate Monuments, Exceptions & Witness Corners 4.3 Discrepancies, Occupation, Encroachments, Rights-of-Way & Descriptions
5 Chapter 5: The Public Land Survey System in Mississippi: Meridians, Cessions & Private Claims
5.1 The Five Principal Meridians Governing Mississippi Surveys 5.2 Indian Cessions, State Boundaries & the Original GLO Surveys 5.3 Colonial Grants, Private Land Claims & Ellicott's Line
6 Chapter 6: PLSS Township Subdivisions, Section Fractionalization & Retracements
6.1 Township Exterior Boundaries, Convergency of Meridians, and Section Breakdown 6.2 Section Subdivisions, Aliquot Parts, and Government Lots 6.3 Retracement Surveys, Original Evidence & the BLM Manual
7 Chapter 7: Lost Corner Restoration & Retracement in Mississippi
7.1 Existent, Obliterated & Lost Corners: Classification and Evidence 7.2 Single Proportionate Measurement Methods 7.3 Double Proportionate Measurement Methods
8 Chapter 8: Mississippi Boundary Law: Hierarchy of Calls & Deed Interpretation
8.1 The Hierarchy of Conflicting Calls & the Intent of the Parties 8.2 Senior Rights vs. Junior Rights in Overlapping Conveyances 8.3 Legal Description Types & Ambiguity Resolution
9 Chapter 9: Adverse Possession, Acquiescence, and Boundary Agreements in Mississippi
9.1 Adverse Possession under Miss. Code Ann. § 15-1-13 9.2 Boundary by Agreement, Acquiescence & Estoppel 9.3 The Surveyor's Role in Possession, Encroachment & Title Disputes
10 Chapter 10: Water Boundaries, Riparian Rights & Public Trust Tidelands in Mississippi
10.1 Non-Tidal Rivers & Streams: Bed Ownership, Public Waterways & Meander Lines 10.2 Accretion, Reliction, Erosion & Avulsion 10.3 Public Trust Tidelands & Mean High Water on the Mississippi Coast
11 Chapter 11: Easements, Rights-of-Way, and Sixteenth Section School Trust Lands
11.1 Easements: Types, Creation, Scope & What the Plat Must Show 11.2 Highway, County Road, Railroad & Utility Rights-of-Way 11.3 Sixteenth Section & Lieu Lands: School Trust Title, Classification & Surveys
12 Chapter 12: Geodetic Control, State Plane Coordinates & Professional Practice
12.1 The Mississippi Coordinate System (§§ 89-6-1 to -19): Zones, Parameters & Grid-to-Ground 12.2 GNSS Positioning in Mississippi: Rule 7.5(2), the GCGC RTN, CORS & Quality Control 12.3 Professional Liability, Survey Contracts & Expert Testimony
3.3 Unadjusted Closure & Angular Closure
Key Takeaways Explain This Topic AI
Rule 7.5 minimum unadjusted closures are 1:10,000 for Class A, 1:7,500 for Class B, and 1:5,000 for Class C.
Rule 7.5 angular closure limits are 15″√N for Class A, 25″√N for Class B, and 30″√N for Class C, where N is the number of angles in the traverse.
The linear error of closure is the square root of the sum of the squared latitude and departure misclosures, computed from unadjusted field data.
A traverse with a 3,600.00-foot perimeter and 0.35-foot linear error closes at about 1:10,286, which meets the Class A minimum of 1:10,000.
Balancing a traverse with the compass rule distributes misclosure but cannot turn a failing unadjusted closure into a compliant Class A survey.
Last updated: September 2026
What Rule 7.5 requires
Rule 7.5(1): "Any time the survey utilizes a conventional traverse loop or traverse between known control monuments , the following parameters shall be satisfied."
- Parameter Class A Class B Class C Remarks in the rule
- Unadjusted closure (minimum) 1:10,000 1:7,500 1:5,000 Loop or between control monuments
- Angular closure (minimum) 15″√N 25″√N 30″√N N = number of angles in traverse
Two words in the table do the work. Unadjusted means the ratio is computed from the raw field measurements before any balancing. Minimum means the survey must be at least this good; better is always acceptable.
Step 1: angular misclosure
For a closed polygon with N angles, the interior angles should sum to (N − 2) × 180°. The angular misclosure is the difference between the measured sum and that theoretical sum. The allowable misclosure is k√N, where k is 15″ (A), 25″ (B), or 30″ (C).
- N √N Class A (15″√N) Class B (25″√N) Class C (30″√N)
- 3 1.732 26.0″ 43.3″ 52.0″
- 4 2.000 30.0″ 50.0″ 60.0″
- 5 2.236 33.5″ 55.9″ 67.1″
- 6 2.449 36.7″ 61.2″ 73.5″
- 8 2.828 42.4″ 70.7″ 84.9″
- 10 3.162 47.4″ 79.1″ 94.9″
- 16 4.000 60.0″ 100.0″ 120.0″
If the misclosure exceeds the limit, look for a blunder (a mis-booked angle, the wrong backsight, or a centering error) and re-observe. Do not distribute the error.
Step 2: latitudes, departures, and linear closure
After the angles check, balance them (commonly equally among the stations), compute azimuths, and resolve each course into components:
- Latitude = distance × cos(azimuth), the north-south component
- Departure = distance × sin(azimuth), the east-west component
In a perfect loop the latitudes and departures each sum to zero. Real sums leave misclosures ΣLat and ΣDep. Then:
- Linear error of closure: E = √(ΣLat² + ΣDep²)
- Precision ratio: 1 : (P ÷ E), where P is the traverse perimeter (sum of the course lengths)
- Worked example: Class A warehouse site
A five-station loop (N = 5) is run for a commercial warehouse site the client says will be highly developed, so the surveyor classifies it as Class A.
Theoretical interior-angle sum: (5 − 2) × 180° = 540°00′00″. Measured sum: 540°00′22″. Misclosure is 22″.
Class A limit: 15″ × √5 = 15″ × 2.236 = 33.5″. Since 22″ ≤ 33.5″, the angles pass.
Perimeter P = 3,600.00 ft; ΣLat = +0.21 ft; ΣDep = −0.28 ft.
E = √(0.21² + 0.28²) = √(0.0441 + 0.0784) = √0.1225 = 0.35 ft .
Ratio = 3,600.00 ÷ 0.35 = 10,286, so the closure is 1:10,286 , which meets the 1:10,000 minimum.
Failure variant. Suppose a centering error makes ΣLat = +0.32 ft and ΣDep = −0.38 ft on the same perimeter. Then E = √(0.1024 + 0.1444) = √0.2468 = 0.4968 ft, and the ratio is 3,600.00 ÷ 0.4968 = 7,246, or 1:7,246 :
- Class Minimum Result
- A 1:10,000 Fails
- B 1:7,500 Fails
- C 1:5,000 Passes
Because this is a Class A job, the crew must find and correct the error in the field. Relabeling the survey as Class C to make it pass would misrepresent the classification required by Rule 7.4.
Why "unadjusted" matters
Adjustment methods are for distributing small random errors after the survey passes :
Compass (Bowditch) rule: each course's latitude correction is −ΣLat × (course length ÷ P), and likewise for departure. It assumes angles and distances are of comparable precision and is the most common method for boundary loops.
Transit rule: corrections are proportional to each course's latitude or departure magnitude. It assumes angles are more precise than distances and is rarely preferred with modern EDMs.
Least squares: weights observations by their precision and is the preferred method for networks with redundant ties and GNSS vectors.
Any of these will make the adjusted coordinates close perfectly on paper. That is why Rule 7.5 measures the unadjusted closure. A survey that closes at 1:8,200 unadjusted is not a Class A survey however it is balanced. Certifying it as Class A misstates the work, which Rule 6.3 (truthful documents) and Rule 7.6 (enforcement) prohibit.
When the traverse table does not apply
Rule 7.5(1) applies when a conventional traverse loop or traverse between known control monuments is used. When boundary points are located by radial methods such as GNSS or total-station radial ties, Rule 7.5(2) requires acceptable procedures and adequate quality control so that the allowable positional accuracy is not exceeded (Section 3.4). Surveyors still commonly verify radial work with redundant measurements and closed checks, because the distance and bearing tolerances in the Rule 7.5 table still apply.