Study guide

1.3 Legal Descriptions and Surveys

Mississippi Real Estate Salesperson Exam

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: Mississippi Real Estate Exam Overview

Mississippi Real Estate Exam Overview

3 National Portion: Chapter 1: Real Property Characteristics, Legal Descriptions & Property Use

1.1 Real Property vs. Personal Property 1.2 Physical and Economic Characteristics of Real Property 1.3 Legal Descriptions and Surveys 1.4 Land-Use Controls, Public & Private Restrictions, and Encumbrances

4 National Portion: Chapter 2: Forms of Ownership, Transfer & Recording of Title

2.1 Estates, Ownership Forms, Rights, and Interests 2.2 Deeds, Title Transfer, Title Insurance, and Recording

5 National Portion: Chapter 3: Property Value & Appraisal

3.1 The Concept of Value and Economic Principles 3.2 The Appraisal Process and USPAP Basics 3.3 Valuation Approaches (Sales Comparison, Cost, Income) and BPOs

6 National Portion: Chapter 4: Real Estate Contracts & Agency

4.1 Contract Types and Required Elements 4.2 Contract Performance, Breach, and Enforceability 4.3 Listing and Sales Contracts and Contingencies 4.4 Agency Relationships, Fiduciary Duties, and Disclosure

7 National Portion: Chapter 5: Real Estate Practice (Brokerage, Fair Housing, Risk)

5.1 Broker Responsibilities, Brokerage Agreements, and Compensation 5.2 Federal Fair Housing Law and Protected Classes 5.3 Advertising, Antitrust, and Risk Management

8 National Portion: Chapter 6: Property Disclosures & Environmental Issues

6.1 Property Conditions and Environmental Hazards 6.2 Disclosure Obligations, Stigmatized Property, and Liability

9 National Portion: Chapter 7: Financing & Settlement

7.1 Financing Concepts, Notes, Mortgages, and Deeds of Trust 7.2 Loan Types, Lender Requirements, PMI, and Mortgage Insurance 7.3 Federal Financing Regulations (RESPA, TILA, ECOA, TRID) 7.4 Settlement, Closing Statements, and Prorations

10 National Portion: Chapter 8: Real Estate Math Calculations

8.1 Area, Volume, and Valuation Calculations 8.2 Commission, Financing, and Interest Calculations 8.3 Proration, Transfer Tax, and Investment Math

11 Chapter 1: Mississippi Real Estate Commission & Licensing

1.1 Mississippi Real Estate Commission (MREC) 1.2 Mississippi License Requirements 1.3 License Maintenance and Renewal

12 Chapter 2: Agency & Disclosure

2.1 Mississippi Agency Relationships 2.2 Duties to All Parties

13 Chapter 3: Contracts & Property

3.1 Mississippi Contract Requirements 3.2 Mississippi Property Condition Disclosure

14 Chapter 4: Trust Accounts & Violations

4.1 Mississippi Trust Account Requirements 4.2 License Law Violations & Discipline

1.3 Legal Descriptions and Surveys

Key Takeaways Explain This Topic AI

The three legal description methods are metes and bounds, rectangular (government) survey, and lot and block (recorded plat).

Metes and bounds uses a point of beginning (POB) and must return to it; a description that does not close is defective.

In the rectangular survey system, a township is 6 miles square (36 square miles) and contains 36 sections; one section is 1 mile square = 640 acres.

An acre is 43,560 square feet; commit this to memory for area math.

A benchmark and datum establish elevation/vertical measurement (used for air lots and condominiums); a monument is a physical or natural marker in metes and bounds.

Last updated: June 2026

Three Ways to Legally Describe Land

A legal description identifies a parcel precisely enough that a surveyor could locate it. A street address is not a legal description. Three accepted methods appear on the exam:

Metes and bounds — the oldest method. Uses distances (metes) and directions/boundaries (bounds) , starting at a point of beginning (POB) , tracing the perimeter, and returning to the POB . A description that fails to close (does not return to the POB) is defective. Boundaries are tied to monuments — natural (a river, large rock) or artificial (an iron pin, a road). Because monuments can move or vanish, this method can be imprecise.

Rectangular (government) survey system — also called the PLSS . Uses principal meridians (north-south) and base lines (east-west) to form a grid of townships and sections. Used in most states west of the original colonies.

Lot and block (recorded plat / subdivision) — references a lot and block number on a recorded subdivision map (plat) filed in the county. Most common for modern residential subdivisions; short and precise, e.g., "Lot 12, Block 4, Sunnyvale Estates, as recorded in Plat Book 9, Page 22."

Rectangular survey math (memorize these)

The grid breaks down predictably:

  • Unit Size
  • Township 6 miles × 6 miles = 36 square miles
  • Sections per township 36
  • Section 1 mile × 1 mile = 1 square mile = 640 acres
  • Half section 320 acres
  • Quarter section 160 acres
  • Acre 43,560 square feet

Worked example 1 — fractions of a section: "The NW¼ of the SE¼ of Section 10." Multiply the denominators and divide 640 by the product:

  • ¼ × ¼ = 1/16 of a section
  • 640 acres ÷ 16 = 40 acres

Rule of thumb: each time you read "the ¼ of the ¼," multiply the bottoms (4 × 4 = 16) and divide 640 by that number. "The S½ of the NW¼" = ½ × ¼ = 1/8 → 640 ÷ 8 = 80 acres .

Worked example 2 — square feet to acres: A rectangular lot is 217.8 ft × 200 ft. Area = 217.8 × 200 = 43,560 sq ft = 1.0 acre (because 43,560 sq ft = 1 acre). If a lot were 100 ft × 435.6 ft = 43,560 sq ft = 1 acre as well.

Reading a metes-and-bounds call and combining systems

A metes-and-bounds description reads like directions: "Beginning at the iron pin at the NE corner of Lot 7; thence S 30° E 200 feet; thence S 60° W 150 feet; thence N 30° W 200 feet; thence back to the point of beginning." Each thence is a course (direction) and distance . The description is valid only if the final call closes back to the POB. If a parcel cannot close, it is legally defective and a surveyor must correct it before title can pass cleanly.

The three systems frequently combine in one description. A subdivision plat (lot and block) is itself created by first surveying the tract using the rectangular system, and the metes-and-bounds method is used to describe irregular parcels or to set the outer boundary of a subdivision before it is platted. A reference like "Lot 4, Block 2, of the SE¼ of Section 14, Township 3 North, Range 2 East" uses both lot-and-block and rectangular survey in a single line.

Worked example 3 — combined fraction with acreage and price: A buyer purchases the "E½ of the SW¼ of the NW¼" of a section. Multiply the fractions: ½ × ¼ × ¼ = 1/32. Acreage = 640 ÷ 32 = 20 acres . At $6,500 per acre the price is 20 × $6,500 = $130,000 . The exam often chains the acreage answer into a price or per-square-foot calculation, so finish the fraction first, then carry the acreage into the dollar step.