Study guide
2.3 Coinsurance and the Coinsurance Formula
Montana Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
How the Montana P&C Exam Maps to Your Study Plan
2 Introduction: Montana Property & Casualty Insurance Exam Overview
Montana Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
Risk, Hazards, Perils, and the Law of Large Numbers Insurable Interest, Indemnity, and Other Insurance Principles Insurance Contract Law and Elements Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
Homeowners Forms HO-2 through HO-8 and Eligibility Section I Coverages A-D and Additional Coverages Section I Perils Insured Against and Exclusions Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D - Coverage for Damage to Your Auto 7.2 Exclusions and Part E - Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
CGL Coverage A: Bodily Injury and Property Damage Liability CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
CGL Limits of Insurance and Aggregates Occurrence vs. Claims-Made CGL and Retroactive Dates Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (Hull, Cargo, Freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Montana P&C Insurance Regulation & Licensing
1.1 Commissioner of Securities and Insurance (CSI) 1.2 Montana Producer Licensing Requirements 1.3 Montana Producer Responsibilities and Prohibited Practices
22 Chapter 2: Montana Property Insurance
2.1 Montana Homeowners Insurance 2.2 Montana Commercial Property Insurance
23 Chapter 3: Montana Casualty & Auto Insurance
3.1 Montana Auto Insurance Requirements 3.2 Montana Liability & Workers' Compensation Insurance
24 Chapter 4: Montana Ethics & Professional Conduct
4.1 Ethical Standards and Professional Responsibilities 4.2 Montana Prohibited Practices and Consumer Protection
2.3 Coinsurance and the Coinsurance Formula
Key Takeaways Explain This Topic AI
Coinsurance requires carrying a stated % (80/90/100) of value at time of loss or face a penalty.
Formula: (Did / Should) × Loss – Deductible; deductible is subtracted last.
Should = value at time of loss × coinsurance %; ratio is capped at 1.0 (no over-insurance bonus).
Penalty vanishes on a total loss — insurer pays the policy limit.
Agreed Value endorsement suspends coinsurance via a signed Statement of Values.
Last updated: June 2026
Why Coinsurance Exists
Most property losses are partial, not total. If insurers charged the same rate regardless of how much coverage you bought, everyone would underinsure (buy a $200,000 limit on a $1,000,000 building) and still collect on small claims. Coinsurance corrects this by requiring the insured to carry a limit equal to a stated percentage of the property's value at the time of loss — typically 80%, 90%, or 100% . Carry enough and losses are paid in full (up to the limit); carry too little and the insured is penalized as a co-insurer of the shortfall.
The coinsurance clause appears in CP 00 10 (Building and Personal Property Coverage Form) and in dwelling/homeowners building coverage.
The Coinsurance Formula
The formula every P&C candidate must memorize:
Payment = (Did / Should) × Loss – Deductible
Where:
Did = limit of insurance actually carried.
Should = property value at time of loss × coinsurance percentage.
Loss = amount of the covered loss.
The payment can never exceed the policy limit. Apply the deductible after the coinsurance calculation. Memorize it as "Did over Should, times the loss, minus the deductible."
Worked Example — Underinsured Building
A building is worth $500,000 at the time of loss. The policy has an 80% coinsurance clause, the insured carries a $300,000 limit, the loss is $100,000 , and the deductible is $1,000 .
- Step Value
- Should carry (80% × $500,000) $400,000
- Did carry $300,000
- Coinsurance ratio (Did/Should) 0.75
- Loss $100,000
- Indicated payment (0.75 × $100,000) $75,000
- Less deductible –$1,000
- Insurer pays $74,000
The insured eats $26,000 (the $25,000 coinsurance penalty plus the $1,000 deductible) for carrying only 75% of the required limit. Had they carried $400,000+, the $100,000 loss would have been paid in full minus deductible.
Edge Cases and Traps
Total loss: the penalty disappears — the insurer simply pays the policy limit (you cannot collect more than the limit anyway).
Compliance: if Did ≥ Should, the ratio is capped at 1.0 — no penalty, never a bonus for over-insuring.
Agreed Value endorsement suspends coinsurance entirely by substituting a signed Statement of Values.
Value at time of loss , not at policy inception, drives "Should" — inflation can quietly push an insured below compliance, which is why Inflation Guard matters.
The deductible is always subtracted last , after the ratio is applied.
Coinsurance on Contents and Multiple Locations
Coinsurance applies separately to each coverage and each location unless a blanket limit with the proper margin clause is used. A building can be in compliance while the business personal property at the same address is penalized, because each is tested against its own "should-carry" amount. On blanket policies, ISO requires a signed Statement of Values and applies a margin clause (for example, 110%) to cap recovery at any single location.
Why the Penalty Is a Premium-Equity Tool
Examiners test the purpose of coinsurance: it equalizes rates between insureds who fully insure and those who gamble on never having a total loss. Because most losses are partial, an underinsured policyholder would otherwise pay far less premium yet recover nearly as much on common small claims. The penalty restores rate equity by reducing partial-loss recovery in proportion to the underinsurance.
Order of Operations
- Step Action
- 1 "Should carry" = value at loss x coinsurance %
- 2 Divide "did carry" by "should carry" (cap ratio at 1.0)
- 3 Multiply ratio x amount of loss
- 4 Subtract the deductible last
- 5 Cap the result at the policy limit
- Common Distractors
Coinsurance never pays a bonus for over-insuring - the ratio caps at 1.0.
On a total loss , the penalty is irrelevant because recovery is limited to the policy limit anyway.
Inflation guard and agreed value are the two cures the exam expects you to name when an insured keeps slipping out of compliance.
The percentage in a coinsurance clause is the required-to-carry figure, not the share the insured pays - a frequent wording trap.
Coinsurance vs. an Inland-Marine Floater
A useful exam contrast: scheduled inland-marine floaters (such as the Personal Articles Floater) carry no coinsurance because each item is insured at an agreed value, whereas commercial property and dwelling building coverage almost always carry a coinsurance condition.
When a question asks how to eliminate a recurring coinsurance penalty on volatile-value property, the best answer is often to schedule the items on an agreed-value floater rather than to keep raising a blanket limit. Remember too that the coinsurance percentage is selected by the insured at policy inception in exchange for a rate credit - a higher coinsurance commitment earns a lower rate, which is the economic reason an insured accepts the penalty risk in the first place.
Agreed Value as the Clean Cure
When an insured repeatedly slips out of coinsurance compliance, the Agreed Value option is the definitive fix: the insurer and insured agree on a value via a signed Statement of Values , the coinsurance clause is suspended for the term, and a covered loss is paid up to the agreed figure without any penalty calculation. The trade-off is a higher premium and the need to refresh the statement each renewal, but it eliminates the partial-loss penalty entirely - the answer the exam expects for a high-value, fluctuating-value account.