Study guide
2.5 Monitoring, Accident Investigation, NADOPOD Reporting, Record Keeping & Audit
NIOSH Site Safety Supervisor SSS
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The SSS Role & Malaysian OSH Legislation
1.1 The Site Safety Supervisor: Legal Appointment, DOSH Registration & Core Duties 1.2 OSHA 1994 as Amended by Act A1648: Structure, Duties, Rights & Penalties 1.3 Regulations Under OSHA 1994 That a Site Safety Supervisor Applies 1.4 CDM Regulations 2024: Duty Holders, Notification, Plans and Site Requirements
2 Chapter 2: OSH Management Systems, Human Factors & Risk Management
2.1 OSH Management Systems: Planning, OSH Policy, Site Organisation & Safety Committees 2.2 Human and Behavioural Factors in Construction Safety 2.3 HIRARC and the General Principles of Prevention 2.4 Safe Work Procedures and Permit-to-Work Systems 2.5 Monitoring, Accident Investigation, NADOPOD Reporting, Record Keeping & Audit
3 Chapter 3: Site Planning, General Control, Welfare & Communication
3.1 Site Initial Planning, Hoarding, Access and Vehicle & Plant Movement 3.2 General Control and Welfare: Housekeeping, Storage, Site Security, Welfare Facilities and First Aid 3.3 Safety Communication: Site Induction, Toolbox Meetings, Signs and Safety Promotion
4 Chapter 4: Working at Height & Fall Protection
4.1 Working at Height: Legal Basis, Fall Physics and the Fall-Control Hierarchy 4.2 Collective Fall Protection: Guardrails, Floor Openings, Nets and Catch Platforms 4.3 Personal Fall Protection, Ladders, MEWPs and Rescue from Height
5 Chapter 5: Scaffolding: Components, Design, Erection & Inspection
5.1 Scaffolding Types, Components, Foundations, Bracing and Tower Scaffolds 5.2 Scaffold Design, Loading, Competent Scaffolders and Safe Erection & Dismantling 5.3 Scaffold Inspection, Tagging Systems and Records
6 Chapter 6: Excavation, Shoring & Underground Services
6.1 Excavation Hazards, Soil Behaviour and Pre-Excavation Investigation 6.2 Protecting Excavation Sides: Battering, Benching, Shoring and Trench Support Systems 6.3 Deep Excavations, Retaining Systems, Cofferdams & Caissons, Monitoring and Rescue 6.4 Excavation Access, Edge Protection, Inspection Reports, Underground Services, Water and Air
7 Chapter 7: Piling, Formwork & Falsework, Concrete Work & Demolition
7.1 Piling Operations: Rigs, Working Platforms, Driven and Bored Piles 7.2 Formwork and Falsework: Temporary Works Design, Erection, Inspection and Loading 7.3 Concrete Work: Pre-Pour Checks, Pumping and Placing, Cement Health Hazards and Striking 7.4 Demolition and Dismantling: Surveys, Written Arrangements, Methods, Debris and Asbestos
8 Chapter 8: Lifting Operations, Work Equipment & Mobile Plant
8.1 Cranes and Hoists: Certificates of Fitness, Competent Operators, Ground and Crane Safety 8.2 Lifting Tackle and Rigging: Slings, Shackles, Hooks, Inspection and Discard 8.3 Lift Planning, Load Charts, Sling Angles and Crane Signalling 8.4 Work Equipment and Mobile Plant: Earthmoving Machines, Hand and Power Tools, Compressors and Guarding
9 Chapter 9: Electrical Safety, Fire & Hot Work, and Confined Spaces
9.1 Electrical Safety on Construction Sites: Temporary Supply, RCDs, Competent Persons and Safe Isolation 9.2 Fire Safety, Emergency Arrangements, Hot Work and Welding 9.3 Confined Spaces: The 2010 ICOP, Hazardous Atmospheres, Roles, Permits and Rescue
10 Chapter 10: Occupational Health Hazards & Controls
10.1 Physical Hazards: Noise, Vibration, Heat Stress, Radiation and Lighting 10.2 Musculoskeletal Hazards: Manual Handling and Ergonomics on Construction Sites 10.3 Chemical and Biological Hazards: USECHH, CLASS, Silica, Asbestos, Lead and Site Infections 10.4 Psychological Health: Psychosocial Hazards, Stress, Fatigue, Violence and Substance Misuse 10.5 Personal Protective Equipment and Site Emergency Response
11 Chapter 11: The SSS Examination: Paper 1, Site Assessment & Presentation
11.1 The SSS Examination: Entry Rules, Format, Retakes and Paper 1 Technique 11.2 Paper 2: Site Visit Practice, the Site Assessment and the Online HIRARC Presentation
2.5 Monitoring, Accident Investigation, NADOPOD Reporting, Record Keeping & Audit
Key Takeaways Explain This Topic AI
Under regulation 5 of NADOPOD 2004 a death, a serious bodily injury or a dangerous occurrence must be notified to the nearest DOSH office immediately by the quickest means and reported in the approved form within seven days.
DOSH's NADOPOD forms are JKKP 6 for accidents and dangerous occurrences, JKKP 7 for occupational poisoning and disease, and JKKP 8 for the register and annual summary.
Under regulation 9 of NADOPOD 2004 nobody may disturb the scene of a fatal or serious incident except to save life or relieve suffering, maintain public access to an essential service, or prevent further serious damage.
The NADOPOD register must be kept for at least five years, and an annual extract must reach the Director General before 31 January each year (regulation 10).
An audit tests whether the whole OSH management system is working against defined criteria, while an inspection checks the physical condition of a work area at a point in time.
Last updated: October 2026
Monitoring: knowing whether controls work
Planning and controls are only half of a management system. ISO 45001 clause 9 calls the other half performance evaluation : monitoring, measurement, analysis and evaluation, internal audit and management review.
Type What it looks at Construction examples
Active (proactive) monitoring Checks that controls are in place before harm happens Daily SSS inspections; scaffold and excavation inspections; permit audits; noise and dust monitoring; health surveillance; behavioural observations; committee inspections at least every three months
Reactive monitoring Learns from failures after they happen Accidents, near misses, dangerous occurrences, ill-health cases, DOSH notices, complaints
Good sites track leading indicators , such as the percentage of inspections completed, the number of near misses reported and closed, and toolbox attendance. They also track lagging indicators , such as lost-time injuries. Where hours worked are known, an injury frequency rate is often calculated as (number of lost-time injuries x 1,000,000) / total hours worked .
NADOPOD 2004: what, when and how
Section 32 of OSHA 1994 requires notification. The NADOPOD Regulations 2004 (P.U.(A) 128/2004) give the details.
Event Regulation Employer's duty
Death, or serious bodily injury in the First Schedule, from a work accident 5(1) Immediately notify the nearest DOSH office by the quickest means available, and send a report in the approved form within 7 days
Dangerous occurrence in the Second Schedule (even with no injury) 5(1) Same as above
Injury that prevents normal work for more than four calendar days 5(2) Report in the approved form within 7 days
Death within one year of a reportable accident 5(3) Notify the Director General in writing as soon as practicable
Occupational poisoning or disease in the Third Schedule 7(1) Report within 7 days ; the registered medical practitioner also reports within 7 days
DOSH's NADOPOD guideline names the forms: JKKP 6 for notifying accidents and dangerous occurrences, JKKP 7 for occupational poisoning and disease, and JKKP 8 for the register. JKKP 8 records every case during the year, from minor cuts to fatalities, and is summarised for the annual return.
Serious bodily injury (First Schedule)
The First Schedule lists 11 categories, including:
- loss of a limb or joint
- fracture or dislocation of a bone
- permanent loss of sight or hearing in one eye or ear
- loss of consciousness from lack of oxygen or from absorbing, inhaling or ingesting a substance
- any work-related injury or burn requiring immediate admission to hospital for more than 24 hours
- Construction-relevant dangerous occurrences (Second Schedule, Part I)
Collapse or partial collapse of a scaffold more than 5 metres high that causes a substantial part to fall or overturn (item 1)
Collapse or partial collapse of any part of a building or structure under construction, reconstruction, alteration or demolition, or of any temporary support , unless intended (item 2)
An electrical short circuit or overload with fire or explosion that stops the plant for more than 24 hours (item 3)
- An uncontrolled release of a substance that could cause serious injury or damage to health (item 4)
- Explosion, fire or structural failure affecting the safety of a workplace or plant (items 5 and 6)
Collapse, overturning or failure of a load-bearing part of a crane, derrick, winch, hoist, piling frame, lift, excavator or other lifting appliance (item 11)
Records and penalties
Register: every employer and self-employed person keeps a register of all accidents, dangerous occurrences, poisonings and diseases, whether or not they were reportable (regulation 10(1)). Entries are kept for at least 5 years (regulation 10(2)), and an extract covering the year to 31 December is sent to the Director General before 31 January (regulation 10(3)).
Penalty: contravening NADOPOD carries up to RM10,000 or one year or both (regulation 13).
Preserving the scene
Regulation 9 says that after an accident or dangerous occurrence causing death, serious bodily injury, or serious damage to plant or property, no person may disturb or interfere with any plant, substance or article involved unless authorised to do so, except as far as necessary to:
- save life, prevent injury or relieve suffering
- maintain public access to an essential service or facility
- prevent further damage to property or the environment, or serious loss
In practice the SSS:
- makes the area safe without destroying evidence
- barricades the area and posts a guard
- photographs and sketches the scene
- lists witnesses
- impounds failed items such as slings, harnesses and couplers
- Investigating to root cause
- Four phases
Respond: give first aid, call emergency services, make the area safe, preserve the scene, and notify management and DOSH.
Gather evidence: use the "4P" checklist:
- People: separate, early, open-question interviews with the injured person and witnesses
- Position: measurements, photographs, weather and lighting
- Parts: equipment, PPE and failed components, tagged and secured
Paper: HIRARC, method statement, permit, inspection records, certificates of fitness, training and competency records
Analyse causes with structured tools.
Act: define corrective and preventive actions, assign owners and dates, update HIRARC and procedures, share lessons, and verify effectiveness.
Levels of cause
- Level Question Example (fall through a floor opening)
- Immediate What directly caused the harm? Worker stepped on an unsecured plywood cover
Underlying Why was that condition or act present? Cover removed for a delivery and replaced loosely; no inspection after delivery
Root What system failure allowed it? No procedure for removing opening covers; delivery not covered by a permit; supervision stretched
5 Whys: keep asking "why?" until you reach a management system cause that, if fixed, prevents recurrence.
Fishbone (Ishikawa) diagram: group causes under people, plant and equipment, methods, materials, environment and management.
Avoid ending an investigation at "worker careless". As Section 2.2 explains, that describes the act, not the cause.
Records an SSS should know
- Record Rule Minimum retention
- NADOPOD register (JKKP 8) NADOPOD reg. 10 5 years
- Safety and health committee minutes SHC Regs reg. 27 7 years
- Committee inspection and investigation reports SHC Regs reg. 14 7 years
- SHO monthly reports SHO Regs reg. 20 10 years
- Excavation and cofferdam inspection reports CDM 2024 reg. 26 On site until completion, plus 3 months
- Personal exposure monitoring (chemicals) USECHH reg. 26 30 years (other monitoring 5 years)
- Health surveillance records USECHH reg. 27 30 years
- Noise risk assessment reports Noise Regs 2019 reg. 11 30 years
- Audiometric test reports Noise Regs 2019 reg. 11 Employment plus 5 years
- Audit
An OSH audit is a systematic, independent and documented examination of whether the OSH management system meets its planned arrangements and criteria, such as ISO 45001, the client's requirements, the construction phase plan or the law, and whether it is effective.
- Feature Inspection Audit
- Focus Physical conditions and behaviour now The management system over time
- Frequency Daily or weekly Planned periodically, for example quarterly or six-monthly
- Done by SSS, supervisors, committee Trained auditors independent of the area audited
- Evidence What is seen on the walk Documents, records, interviews and observation, sampled against criteria
Output Defect list, immediate corrections Findings (nonconformities, observations), corrective action plan, management review input
A typical internal audit cycle:
- plan the scope and criteria
- hold an opening meeting
- review documents
- sample site evidence and interview staff
- grade the findings
- hold a closing meeting
- issue the report
- follow up corrective actions until they are closed
SHC Regulations regulation 15(b) requires the committee to consider safety audits submitted to it. Audit results also feed the PDCA Act stage.