Study guide

10.4 Psychological Health: Psychosocial Hazards, Stress, Fatigue, Violence and Substance Misuse

NIOSH Site Safety Supervisor SSS

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The SSS Role & Malaysian OSH Legislation

1.1 The Site Safety Supervisor: Legal Appointment, DOSH Registration & Core Duties 1.2 OSHA 1994 as Amended by Act A1648: Structure, Duties, Rights & Penalties 1.3 Regulations Under OSHA 1994 That a Site Safety Supervisor Applies 1.4 CDM Regulations 2024: Duty Holders, Notification, Plans and Site Requirements

2 Chapter 2: OSH Management Systems, Human Factors & Risk Management

2.1 OSH Management Systems: Planning, OSH Policy, Site Organisation & Safety Committees 2.2 Human and Behavioural Factors in Construction Safety 2.3 HIRARC and the General Principles of Prevention 2.4 Safe Work Procedures and Permit-to-Work Systems 2.5 Monitoring, Accident Investigation, NADOPOD Reporting, Record Keeping & Audit

3 Chapter 3: Site Planning, General Control, Welfare & Communication

3.1 Site Initial Planning, Hoarding, Access and Vehicle & Plant Movement 3.2 General Control and Welfare: Housekeeping, Storage, Site Security, Welfare Facilities and First Aid 3.3 Safety Communication: Site Induction, Toolbox Meetings, Signs and Safety Promotion

4 Chapter 4: Working at Height & Fall Protection

4.1 Working at Height: Legal Basis, Fall Physics and the Fall-Control Hierarchy 4.2 Collective Fall Protection: Guardrails, Floor Openings, Nets and Catch Platforms 4.3 Personal Fall Protection, Ladders, MEWPs and Rescue from Height

5 Chapter 5: Scaffolding: Components, Design, Erection & Inspection

5.1 Scaffolding Types, Components, Foundations, Bracing and Tower Scaffolds 5.2 Scaffold Design, Loading, Competent Scaffolders and Safe Erection & Dismantling 5.3 Scaffold Inspection, Tagging Systems and Records

6 Chapter 6: Excavation, Shoring & Underground Services

6.1 Excavation Hazards, Soil Behaviour and Pre-Excavation Investigation 6.2 Protecting Excavation Sides: Battering, Benching, Shoring and Trench Support Systems 6.3 Deep Excavations, Retaining Systems, Cofferdams & Caissons, Monitoring and Rescue 6.4 Excavation Access, Edge Protection, Inspection Reports, Underground Services, Water and Air

7 Chapter 7: Piling, Formwork & Falsework, Concrete Work & Demolition

7.1 Piling Operations: Rigs, Working Platforms, Driven and Bored Piles 7.2 Formwork and Falsework: Temporary Works Design, Erection, Inspection and Loading 7.3 Concrete Work: Pre-Pour Checks, Pumping and Placing, Cement Health Hazards and Striking 7.4 Demolition and Dismantling: Surveys, Written Arrangements, Methods, Debris and Asbestos

8 Chapter 8: Lifting Operations, Work Equipment & Mobile Plant

8.1 Cranes and Hoists: Certificates of Fitness, Competent Operators, Ground and Crane Safety 8.2 Lifting Tackle and Rigging: Slings, Shackles, Hooks, Inspection and Discard 8.3 Lift Planning, Load Charts, Sling Angles and Crane Signalling 8.4 Work Equipment and Mobile Plant: Earthmoving Machines, Hand and Power Tools, Compressors and Guarding

9 Chapter 9: Electrical Safety, Fire & Hot Work, and Confined Spaces

9.1 Electrical Safety on Construction Sites: Temporary Supply, RCDs, Competent Persons and Safe Isolation 9.2 Fire Safety, Emergency Arrangements, Hot Work and Welding 9.3 Confined Spaces: The 2010 ICOP, Hazardous Atmospheres, Roles, Permits and Rescue

10 Chapter 10: Occupational Health Hazards & Controls

10.1 Physical Hazards: Noise, Vibration, Heat Stress, Radiation and Lighting 10.2 Musculoskeletal Hazards: Manual Handling and Ergonomics on Construction Sites 10.3 Chemical and Biological Hazards: USECHH, CLASS, Silica, Asbestos, Lead and Site Infections 10.4 Psychological Health: Psychosocial Hazards, Stress, Fatigue, Violence and Substance Misuse 10.5 Personal Protective Equipment and Site Emergency Response

11 Chapter 11: The SSS Examination: Paper 1, Site Assessment & Presentation

11.1 The SSS Examination: Entry Rules, Format, Retakes and Paper 1 Technique 11.2 Paper 2: Site Visit Practice, the Site Assessment and the Online HIRARC Presentation

10.4 Psychological Health: Psychosocial Hazards, Stress, Fatigue, Violence and Substance Misuse

Key Takeaways Explain This Topic AI

One of the objects of OSHA 1994 (section 4(c)) is to promote an occupational environment adapted to workers' physiological and psychological needs.

DOSH's Guidelines on Psychosocial Risk Assessment and Management at the Workplace 2024 define psychosocial risk, following ISO 45003:2021, as the combination of the likelihood of exposure to psychosocial hazards and the severity of resulting injury or ill health.

DOSH's 2024 PRisMA process has six steps: identify psychosocial hazards with the LEO26 tool, assess existing controls with the EPC23 checklist, prioritise risk, manage risk, reassess, and keep records.

DOSH's 2024 guideline lists psychosocial hazards such as excessive workload, poor communication or support, monotonous work, lack of control, unclear roles, bullying or harassment, long or inflexible hours, and limited career development.

DOSH's 2024 guideline says employers shall conduct risk assessment as the Act requires and should appoint a Psychosocial Trained Person (PTP) to help carry out PRisMA.

Last updated: October 2026

Why psychological health is a safety issue

Mental health problems affect workers directly and also cause accidents:

  • a fatigued crane operator misjudges a radius
  • a stressed supervisor skips a permit check
  • a worker under financial pressure accepts an unsafe shortcut to finish faster

OSHA 1994 recognises this. Section 4(c) lists among the Act's objects promoting "an occupational environment for persons at work which is adapted to their physiological and psychological needs". DOSH's 2024 guideline bases psychosocial risk assessment on the section 18B duty to assess risks to anyone affected by the undertaking; breaching section 18B carries a fine of up to RM500,000, two years' imprisonment, or both (section 19). The CDM 2024 First Schedule asks duty holders to:

reduce monotonous work and work at a predetermined rate (principle 4)

develop a prevention policy covering work organisation, working conditions and social relationships (principle 7)

DOSH has published two guidance documents:

Guidelines for the Prevention of Stress and Violence at the Workplace (2001)

Guidelines on Psychosocial Risk Assessment and Management at the Workplace 2024 , which introduce the PRisMA approach

Key concepts from DOSH's 2024 guideline

Psychosocial risk: following ISO 45003:2021, the combination of the likelihood of exposure to work-related psychosocial hazards and the severity of the injury or ill health they can cause.

Psychosocial hazards (DOSH's examples):

  • Hazard Construction example
  • Workload Unrealistic programmes; liquidated damages pressure; night pours after day shifts
  • Work context Poor communication; conflicts between trades; lack of support from supervisors
  • Work content Monotonous or repetitive tasks such as rebar tying or tiling all day
  • Job control No say in how or when work is done; piece-rate pressure
  • Role clarity Unclear responsibilities between subcontractors; conflicting instructions

Organisational culture Bullying, harassment or discrimination , including towards foreign workers or women on site

  • Work-life balance Long hours, seven-day weeks, inflexible schedules
  • Career development Limited opportunities for growth or advancement

The job demand-control-support model (Karasek and Theorell, 1990): strain is highest when job demands are high , job control is low , and social support is low . Stress can be reduced by increasing workers' control over their work and the support they get from supervisors and colleagues, as well as by reducing excessive demands.

Effects

DOSH's 2024 guideline lists the effects of psychosocial risk:

on employees: increased stress, burnout, anxiety, depression and reduced job satisfaction, plus physical problems such as cardiovascular disease

  • on organisations: lower productivity, absenteeism and presenteeism, higher turnover and reputational damage
  • The PRisMA process (DOSH 2024)

Step Activity

1 Identify psychosocial hazards using the LEO26 assessment tool, a worker questionnaire covering job control, work demand and job support

2 Assess existing control measures using the employer's EPC23 checklist (23 points); required when LEO26 scores fall in the high-risk category

3 Prioritise risk by matching the LEO26 and EPC23 results

4 Manage risk according to priority, using the guideline's action plan themes: social support, working environment, job matching, training and education, transparency and fairness, control, workload

  • 5 Reassess the risk and evaluate whether the measures work
  • 6 Keep records

Roles under the 2024 guideline:

The employer shall conduct risk assessment as the Act requires, and should appoint a Psychosocial Trained Person (PTP) to help carry out PRisMA.

The PTP must keep information confidential and act with integrity.

Employees must cooperate with PRisMA activities and report psychosocial issues.

The guideline favours a proactive approach (employee surveys, job design reviews, risk mapping, policy reviews) over reacting after problems appear.

Fatigue and working hours

Fatigue impairs judgement and reaction time like alcohol does. On construction sites it comes from:

  • long shifts and overtime, including back-to-back day and night pours
  • seven-day working and long commutes
  • heat and dehydration
  • poor sleep in crowded accommodation
  • night work disrupting the body clock

Controls:

Plan programmes and pours to avoid excessive hours. Set maximum shift lengths and minimum rest periods in the site rules.

Rotate crews on long pours, and schedule the most safety-critical tasks (crane lifts, confined space entries) for when workers are fresh.

Provide rest areas and water (CDM Second Schedule) and manage heat (Section 10.1).

Brief supervisors to spot fatigue and stand people down without penalty.

Check that workers' accommodation meets the Employees' Minimum Standards of Housing, Accommodations and Amenities Act 1990 (Act 446) .

Workplace violence, bullying and harassment

DOSH's 2001 guideline treats violence , including threats and abuse, as a workplace hazard. The 2024 guideline lists bullying, harassment and discrimination under organisational culture. Malaysian law also provides remedies for sexual harassment through the Anti-Sexual Harassment Act 2022 (Act 840) , which set up a tribunal, and the complaint procedures in employment law.

On site:

set a clear policy and site rules against violence, bullying and harassment, explained at induction in workers' languages

provide confidential reporting routes , including routes outside the worker's own subcontractor

act on complaints, protect complainants from retaliation (OSHA section 27 protects employees who raise safety complaints), and investigate fairly

  • prepare security staff and supervisors to defuse conflict, for example at gates and pay days
  • Alcohol and drugs

Impairment from alcohol or drugs, including some prescribed medicines, endangers everyone on a construction site. Under section 24 of OSHA every employee must take reasonable care of themselves and others. Good practice includes:

  • a written alcohol and drug policy in the site rules, with clear consequences and support routes
  • fitness-for-duty checks by supervisors at the start of shifts and before safety-critical tasks
  • testing programmes only where lawful and fair, with confidentiality

support rather than only punishment for workers who seek help, with referral to counselling or treatment services

Supporting workers' mental health

Talk about it. Include mental health in toolbox talks and inductions, and make it normal to say "I'm not OK".

Train supervisors to recognise warning signs (withdrawal, irritability, absence, mistakes, talk of hopelessness) and to respond with concern, not discipline.

Provide help. Display contacts for counselling and crisis support, such as the national mental health helplines, in workers' languages. Some employers fund an employee assistance programme.

Remove root causes. Realistic programmes, pay on time, fair treatment of subcontractors' workers, decent accommodation, and clear roles.

Respond to crises. If a worker talks of suicide or self-harm, stay with them, take it seriously, and get urgent help (999 or hospital emergency services).

Scenario: the night-pour supervisor

A site engineer has supervised three consecutive night pours after working day shifts. During the third pour he signs the permit to load without inspecting the deck, and later snaps at a worker who raises a concern. The SSS:

Stops the pour until the falsework is inspected properly by a fresh, competent person.

Raises fatigue with the project manager as a workload and work organisation issue. Crew and supervisor rotas are revised to set a minimum rest period between shifts.

Suggests the company include this project in a PRisMA assessment led by a trained PTP, using the LEO26 survey, and review workload and support measures.

Makes sure the worker who raised the concern is thanked, not blamed, reinforcing open reporting.