Study guide

11.1 The SSS Examination: Entry Rules, Format, Retakes and Paper 1 Technique

NIOSH Site Safety Supervisor SSS

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The SSS Role & Malaysian OSH Legislation

1.1 The Site Safety Supervisor: Legal Appointment, DOSH Registration & Core Duties 1.2 OSHA 1994 as Amended by Act A1648: Structure, Duties, Rights & Penalties 1.3 Regulations Under OSHA 1994 That a Site Safety Supervisor Applies 1.4 CDM Regulations 2024: Duty Holders, Notification, Plans and Site Requirements

2 Chapter 2: OSH Management Systems, Human Factors & Risk Management

2.1 OSH Management Systems: Planning, OSH Policy, Site Organisation & Safety Committees 2.2 Human and Behavioural Factors in Construction Safety 2.3 HIRARC and the General Principles of Prevention 2.4 Safe Work Procedures and Permit-to-Work Systems 2.5 Monitoring, Accident Investigation, NADOPOD Reporting, Record Keeping & Audit

3 Chapter 3: Site Planning, General Control, Welfare & Communication

3.1 Site Initial Planning, Hoarding, Access and Vehicle & Plant Movement 3.2 General Control and Welfare: Housekeeping, Storage, Site Security, Welfare Facilities and First Aid 3.3 Safety Communication: Site Induction, Toolbox Meetings, Signs and Safety Promotion

4 Chapter 4: Working at Height & Fall Protection

4.1 Working at Height: Legal Basis, Fall Physics and the Fall-Control Hierarchy 4.2 Collective Fall Protection: Guardrails, Floor Openings, Nets and Catch Platforms 4.3 Personal Fall Protection, Ladders, MEWPs and Rescue from Height

5 Chapter 5: Scaffolding: Components, Design, Erection & Inspection

5.1 Scaffolding Types, Components, Foundations, Bracing and Tower Scaffolds 5.2 Scaffold Design, Loading, Competent Scaffolders and Safe Erection & Dismantling 5.3 Scaffold Inspection, Tagging Systems and Records

6 Chapter 6: Excavation, Shoring & Underground Services

6.1 Excavation Hazards, Soil Behaviour and Pre-Excavation Investigation 6.2 Protecting Excavation Sides: Battering, Benching, Shoring and Trench Support Systems 6.3 Deep Excavations, Retaining Systems, Cofferdams & Caissons, Monitoring and Rescue 6.4 Excavation Access, Edge Protection, Inspection Reports, Underground Services, Water and Air

7 Chapter 7: Piling, Formwork & Falsework, Concrete Work & Demolition

7.1 Piling Operations: Rigs, Working Platforms, Driven and Bored Piles 7.2 Formwork and Falsework: Temporary Works Design, Erection, Inspection and Loading 7.3 Concrete Work: Pre-Pour Checks, Pumping and Placing, Cement Health Hazards and Striking 7.4 Demolition and Dismantling: Surveys, Written Arrangements, Methods, Debris and Asbestos

8 Chapter 8: Lifting Operations, Work Equipment & Mobile Plant

8.1 Cranes and Hoists: Certificates of Fitness, Competent Operators, Ground and Crane Safety 8.2 Lifting Tackle and Rigging: Slings, Shackles, Hooks, Inspection and Discard 8.3 Lift Planning, Load Charts, Sling Angles and Crane Signalling 8.4 Work Equipment and Mobile Plant: Earthmoving Machines, Hand and Power Tools, Compressors and Guarding

9 Chapter 9: Electrical Safety, Fire & Hot Work, and Confined Spaces

9.1 Electrical Safety on Construction Sites: Temporary Supply, RCDs, Competent Persons and Safe Isolation 9.2 Fire Safety, Emergency Arrangements, Hot Work and Welding 9.3 Confined Spaces: The 2010 ICOP, Hazardous Atmospheres, Roles, Permits and Rescue

10 Chapter 10: Occupational Health Hazards & Controls

10.1 Physical Hazards: Noise, Vibration, Heat Stress, Radiation and Lighting 10.2 Musculoskeletal Hazards: Manual Handling and Ergonomics on Construction Sites 10.3 Chemical and Biological Hazards: USECHH, CLASS, Silica, Asbestos, Lead and Site Infections 10.4 Psychological Health: Psychosocial Hazards, Stress, Fatigue, Violence and Substance Misuse 10.5 Personal Protective Equipment and Site Emergency Response

11 Chapter 11: The SSS Examination: Paper 1, Site Assessment & Presentation

11.1 The SSS Examination: Entry Rules, Format, Retakes and Paper 1 Technique 11.2 Paper 2: Site Visit Practice, the Site Assessment and the Online HIRARC Presentation

11.1 The SSS Examination: Entry Rules, Format, Retakes and Paper 1 Technique

Key Takeaways Explain This Topic AI

Paper 1 of the NIOSH SSS examination has Part A, 60 multiple-choice questions in 1 hour 30 minutes, and Part B, three structured questions and one essay in 2 hours, each with a 50% pass mark.

Paper 2 of the NIOSH SSS examination has Part A, a 30-minute site assessment, and Part B, a 10-minute online presentation with 10 minutes of questions; candidates must pass both parts.

The NIOSH SSS examination fee is RM350: RM100 for Paper 1, RM100 for Paper 2 Part A and RM150 for Paper 2 Part B.

Since July 2025, NIOSH SSS course participants must sit their first examination within one year of the course end date.

SSS candidates may retake the examination without limit, but must pass within two years of their first examination date, or attend the SSS course again.

Last updated: October 2026

Who sets the examination

The examination belongs to the Lembaga Penilaian Kompetensi Keselamatan dan Kesihatan Pekerjaan (LPKKKP) , the OSH Competency Assessment Board. Its SSS Competency Committee is supported by a secretariat at NIOSH's Examination and Certification Division. The rules below come from the LPKKKP's Syarat dan Format Peperiksaan Penyelia Keselamatan Tapak (SSS) , document 600-6-12/3A :

  • approved on 26 June 2025
  • in force from July 2025
  • most recently updated in February 2026

Check NIOSH's website before you book, because these documents are revised.

Entry requirements

  • Requirement Detail
  • General Malaysian citizen, and able to communicate orally and in writing in Bahasa Melayu or English

Education At least SRP, PMR or PT3 , or an equivalent certificate recognised by the Malaysian Qualifications Agency (MQA)

  • Course Completed the SSS course run by a training provider registered with DOSH (JKKP)
  • Deadline From July 2025, the first examination must be taken within one year of the course end date

DOSH's registration routes (Section 1.1) set the experience you need after passing. The examination itself has no experience requirement.

Format and fees

  • Paper Part Format Questions Time Pass mark Fee
  • 1 A Multiple-choice 60 1 h 30 min 50% RM100 (Paper 1)
  • 1 B Structured questions and an essay 3 structured + 1 essay 2 h 50% (included above)
  • 2 A Site assessment ( Penilaian Tapak ) – 30 min 50% RM100
  • 2 B Presentation : presentation session and question-and-answer session – 10 min + 10 min 50% RM150
  • Total RM350

The official notes to the format say:

New candidates sit Paper 1 and Paper 2 in the same examination session .

Candidates with repeat status from before the July 2025 session also sit both papers in one session.

Candidates must pass both Part A and Part B of Paper 2 .

A candidate who fails Paper 2 repeats only the part they failed : Part A or Part B.

Language: every question is printed in Bahasa Melayu and English . Answer in one language only throughout. Learn the key terms in both languages, for example:

  • kontraktor prinsipal : principal contractor
  • penilaian risiko : risk assessment
  • perancah : scaffold
  • pengorekan : excavation
  • ruang terkurung : confined space
  • Retakes and certificate

Retakes: there is no limit on retakes, but the candidate must complete the examination within two years of the date of the first examination .

After two years: the candidate is given fail status and must attend the SSS course again .

Certificate: candidates who pass receive a Sijil Kelayakan (certificate of qualification). They then apply to DOSH through MyKKP for registration as a competent person (Section 1.1).

The 2026 session pattern

NIOSH's 2026 schedule has nine sessions : 13 January, 10 February, 7 April, 19 May, 23 June, 28 July, 8 September, 20 October and 24 November.

Paper 1 and Paper 2A are held on the same day. Paper 2B runs online by Zoom over the following three days.

Applications and payment close about a month before each session. Repeat candidates must pay by the closing date.

Venues are NIOSH headquarters in Bandar Baru Bangi and NIOSH regional offices:

  • Johor Bahru, Melaka, Ipoh, Pulau Pinang
  • Kuantan, Kerteh, Kota Bharu
  • Kuching, Bintulu, Miri
  • Kota Kinabalu, Sandakan, Tawau, Labuan

Paper 2A is held at the same location as Paper 1. Your examination slip shows the actual venue. The LPKKKP may postpone sessions or change venues, and says location changes are announced a week before the examination.

Install Telegram : the SSS examination channel link is sent by SMS , so make sure NIOSH has your correct phone number.

Your presentation slides must be ready, as a soft copy, on your Paper 2B day.

Paper 1 Part A: multiple-choice technique

60 questions in 90 minutes gives you 90 seconds per question . Work through once, answering what you know and marking doubtful items, then return to them.

Common traps:

Repealed law.

Options citing the Factories and Machinery Act 1967 , BOWEC 1986 , "JKJ" forms, or the old Special Orders for cranes and temporary structures describe the law before 1 June 2024 .

The current framework is OSHA 1994 as amended, CDM 2024, the Plant Requiring Certificate of Fitness Regulations 2024 and the other current regulations (Sections 1.2 to 1.4).

Who holds the duty.

Under CDM 2024, the client notifies, the principal contractor appoints the SSS, and the construction work contractor carries most Part IV duties.

Under OSHA, the employer assesses risk under section 18B, and the occupier appoints the SHO under section 29.

Numbers.

Learn the figures that recur:

  • notification above 30 working days or 500 person-days
  • 85 dB(A) noise limit
  • confined space oxygen 19.5–23.5%
  • 10% of the lower explosive limit
  • first-aiders 1 per 20 workers on high-risk sites
  • NADOPOD reporting within 7 days
  • the HIRARC 5 × 5 matrix

Distractors are often nearby values.

"First" or "most appropriate" action.

The answer is usually the one that removes people from immediate danger or uses the highest level of the hierarchy .

Training, signs and PPE answer "first" questions only when nothing higher is possible.

Absolute words. "Always", "never" and "only" are often wrong unless the law really is absolute. For example, untrained rescue entry into a confined space is never allowed.

Paper 1 Part B: structured questions and the essay

You have 2 hours for three structured questions and one essay. A workable plan:

  • about 25 minutes for each structured question
  • about 35 minutes for the essay
  • the remaining 10 minutes for checking
  • Structured questions

Read the command word and answer to it:

  • Command word What the examiner wants
  • List / state / name Short points, one per line, as many as the marks
  • Describe What it is and how it works
  • Explain Why or how, with reasons and consequences
  • Discuss Several points with advantages, limits or conditions
  • Suggest / recommend Practical, site-specific actions, ordered by the hierarchy of control

For risk questions, use the HIRARC chain: hazard → how it causes harm → who is at risk → controls by the hierarchy (elimination, substitution, engineering, administrative, PPE) → legal basis → the SSS's monitoring role .

Worked example. "State four hazards in a 2.5 m deep trench and suggest a control for each (8 marks)."

Hazard Control

Collapse of the sides Trench box or shoring designed by a competent person, or battering to a safe angle; no entry until supported

Falls into the trench Guardrails or barriers at the edge; covered crossings

Struck by plant or falling spoil Spoil and plant kept back from the edge; stop blocks for tipping vehicles; exclusion zone

Hitting buried services Service drawings checked, cable detector scan, hand-dug trial holes, and a permit to dig

Eight marks for four hazards means two marks each: one for the hazard and one for a specific control. "Wear PPE" earns little.

The essay

Plan for two or three minutes before writing:

Introduction: define the topic and say why it matters on Malaysian sites (accident data, legal duty).

Legal framework: OSHA sections (15, 18B, 24), the relevant CDM 2024 regulations, and other regulations or DOSH guidelines.

Hazards and risks: grouped logically, such as by stage of work.

Controls: following the hierarchy, including planning, competent persons, permits, inspection and emergency arrangements.

The SSS's role: inspection, briefings, stopping unsafe work, reporting to the principal contractor, records.

Conclusion: summarise the key message.

Use headings and short paragraphs so the examiner can find your points. Cite laws correctly. A wrong or repealed citation costs credibility.

  • Final revision checklist
  • Every OSHA section and CDM regulation in Sections 1.2 to 1.4: who, what, and the penalty band
  • The HIRARC process, matrix and control hierarchy (Section 2.3)
  • Permits to work (Section 2.4) and the confined space permit (Section 9.3)

The figures for scaffolds, falls, excavations, lifting, electricity, noise, heat, manual handling and first aid in Chapters 4 to 10

  • The incident reporting duties under NADOPOD 2004 (Section 2.5)
  • Your Paper 2B presentation topic and its HIRARC (Section 11.2)