Study guide

8.2 Adjusters, Settlement Methods and Complaints

Pre-Contract Examination for Insurance Agents PCEIA

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Risk Management and Insurance Fundamentals

1.1 Risk and Its Classifications 1.2 Perils and Physical, Moral and Morale Hazards 1.3 Risk Handling Methods and Functions of Insurance 1.4 Reinsurance Parties, Purpose and Placement 1.5 Proportional and Excess-of-Loss Reinsurance 1.6 PCEIA Routes, Insurance History and the Malaysian Market

2 Chapter 2: Core Legal Principles of Insurance

2.1 Insurable Interest and Statutory Life Relationships 2.2 Good Faith and Pre-Contractual Disclosure 2.3 Indemnity, Subrogation, and Contribution 2.4 Proximate Cause and Loss Determination

3 Chapter 3: Regulatory Framework, Legislation, and Consumer Protection

3.1 BNM and the Insurance Regulatory Structure 3.2 Capital Supervision, Consumer Rights and Associations 3.3 Consumer Protection: PIDM (TIPS) and the Financial Markets Ombudsman Service (FMOS) 3.4 Personal Data Protection in Insurance 3.5 AML Checks, Suspicious Transactions and Tipping Off

4 Chapter 4: The Insurance Contract and Policy Administration

4.1 Offer, Acceptance and Contractual Capacity 4.2 Proposals, Temporary Cover and Premium Payment 4.3 Consumer and Non-Consumer Disclosure Duties 4.4 Misrepresentation Remedies and Proportional Claims 4.5 Policy Anatomy and Conditions 4.6 Warranties, Endorsements and Cancellation 4.7 Contract Validity and Digital Proposals

5 Chapter 5: Law of Agency and Medical & Health Insurance

5.1 Agency Authority and Duties to the Principal 5.2 Principal Duties, Agency Liability and Termination 5.3 Hospital and Surgical Reimbursement Cover 5.4 Critical Illness, Disability Income and Hospital Cash 5.5 Medical Cost Sharing and Waiting Periods 5.6 Medical Renewal, Underwriting and Claims 5.7 Group Medical Cover, Long-Term Care and Dental Benefits

6 Chapter 6: Motor Insurance and Property Lines

6.1 Compulsory Motor Cover and Policy Classes 6.2 Motor Pricing, Extensions and Commercial Uses 6.3 Motor NCD and Policy Excesses 6.4 Motor Claim Procedures and OD KFK 6.5 Fire, Marine, and Miscellaneous Accident Classes 6.6 Property Extensions, Business Interruption and Burglary 6.7 Marine Hull, Aviation and Goods in Transit 6.8 Liability, Employee Protection, Money and Fidelity 6.9 Engineering, Construction and Machinery Risks

7 Chapter 7: General Insurance Underwriting and Policy Terms

7.1 General Risk Selection and Underwriting Evidence 7.2 Rating Factors and Risk Improvements 7.3 Average and Underinsurance Calculations 7.4 First Loss, Excess, Betterment and Recoveries 7.5 General Premium Computation and Insurance Documents

8 Chapter 8: General Insurance Claims and Agent Regulation

8.1 General Claim Notice, Evidence and Verification 8.2 Adjusters, Settlement Methods and Complaints 8.3 General Agent Registration and Premium Handling 8.4 General Agent Conduct, Training and Discipline 8.5 Motor Claim Systems and Post-Settlement Review

9 Chapter 9: Legal Aspects, Nomination, and Assignment of Life Policies

9.1 Legal Characteristics of Life Insurance 9.2 Life Insurable Interest and Contractual Exclusions 9.3 Trust Nominations and Trustee Control 9.4 Executor Nominations and Nomination Changes 9.5 Absolute and Conditional Policy Assignments 9.6 Assignment Notice, Priority and Creditor Rights 9.7 Life Policy Disclosure, Group Rights and Refunds

10 Chapter 10: Life Insurance Products and Investment-Linked Plans

10.1 Term and Mortgage Protection Products 10.2 Whole Life, Endowment and Participating Bonuses 10.3 ILP Accounts, Allocation and Charges 10.4 ILP Unit Pricing, Funds and Sustainability 10.5 Annuities and Longevity Risk 10.6 Family Takaful Funds and Operator Models 10.7 Universal Life, Group Life and Supplementary Contracts

11 Chapter 11: Actuarial Mathematics, Premium Rating, and Non-Forfeiture

11.1 Mortality, Interest and Expense Assumptions 11.2 Level Premiums, Gross Pricing and Group Rates 11.3 Policy Reserves and Statutory Surrender Rights 11.4 Surrender, Reduced Paid-Up and Extended Term 11.5 Automatic Premium Loans and Voluntary Loans 11.6 Policy Debt, Benefit Deductions and Lapse

12 Chapter 12: Life Underwriting, Policy Provisions, and Claims

12.1 Medical and Occupational Life Risk Assessment 12.2 Financial Underwriting, Evidence and Risk Decisions 12.3 Life Grace, Free-Look and Incontestability 12.4 Age Adjustments and Policy Reinstatement 12.5 Life Maturity, Death and Living-Benefit Claims 12.6 Life Claim Recipients, Medical Claims and Registers

13 Chapter 13: Professional Ethics, Market Conduct, and Agency Practice

13.1 LIAM Ethics, Accurate Records and Agent Registration 13.2 Twisting, Churning and Misleading Sales 13.3 Fair Outcomes and Needs-Based Advice 13.4 Product Disclosure and Sales Illustrations 13.5 CPD, Agent Supervision and the Balanced Scorecard

8.2 Adjusters, Settlement Methods and Complaints

Key Takeaways Explain This Topic AI

Loss adjusters are registered professionals who investigate and quantify claims.

Settlement can involve cash, repair, replacement or rebuilding under the policy.

Claim disputes require the insurer’s complaints process and appropriate independent redress.

Last updated: October 2026

Study Focus

Loss adjusters are registered professionals who investigate and quantify claims. Settlement can involve cash, repair, replacement or rebuilding under the policy.

Step 4: The Role of Independent Registered Loss Adjusters

When a claim involves substantial sums, complex technical causation, or commercial property, insurers appoint an independent loss adjuster to investigate and assess the claim.

Regulatory Status Under Bank Negara Malaysia

In Malaysia, loss adjusters are independent professional firms that must be approved by Bank Negara Malaysia (BNM) under Section 11 of the Financial Services Act 2013 (FSA 2013) before carrying on adjusting business. Adjusters must operate under strict codes of professional conduct, maintaining independence and technical objectivity.

Important Distinction: A loss adjuster is an independent professional appointed by the insurer (though impartial in evaluating facts), whereas a loss assessor is a public adjuster hired and compensated directly by the insured to prepare and negotiate claims on the policyholder's behalf.

Primary Functions of the Loss Adjuster

Site Inspection : Inspecting the accident or fire scene promptly, conducting physical examinations, photographing wreckage, and preserving forensic evidence.

Causation Investigation : Establishing the proximate cause of loss in consultation with forensic scientists, fire department investigators (Jabatan Bomba dan Penyelamat Malaysia), and structural engineers.

Policy Interpretation and Liability Verification : Reviewing the policy schedule, endorsements, warranties, and exceptions to advise the insurer whether the claim falls within the scope of legal coverage.

Quantification of Quantum (Adjustment) :

Calculating the true pre-loss market value or reinstatement cost of the damaged assets.

Applying contract deductions including policy deductibles/excesses .

Calculating depreciation for physical wear, tear, and age on indemnity policies, or accounting for betterment when new parts enhance an older asset.

Applying the Condition of Average (Under-Insurance Clause) if the sum insured is less than the true collective value at risk.

Reporting to the Insurer :

Preliminary Report : Issued within days of appointment, outlining initial circumstances, estimated loss reserves, and urgent mitigation measures.

Interim Reports : Providing ongoing updates during extended forensic or accounting reviews.

Final Adjustment Report : Delivering a comprehensive assessment with detailed calculation sheets, liability recommendations, and the agreed settlement quantum endorsed by the insured via a signed Discharge Voucher.

Step 5: The Four Primary Methods of Claim Settlement

Under standard insurance contracts, the insurer possesses the legal option to settle an admitted claim through one of four recognized methods. The choice of settlement method rests contractually with the insurer, not the insured, although insurers typically accommodate customer preferences where practical. [ CLAIM SETTLEMENT METHODS ]

  • |
  • +------------------+----------------+-----------------+------------------+
  • | | | |
  • [ 1. CASH PAYMENT ] [ 2. REPAIR ] [ 3. REPLACEMENT ] [ 4. REINSTATEMENT ]
  • Direct bank Restoring damaged Supplying new Rebuilding
  • transfer or property to working equivalent goods destroyed
  • cheque payout order (e.g. PARS) (glass, jewelry) buildings
  • 1. Payment of Cash

Cash settlement is by far the most common method across both personal and commercial lines. The insurer calculates the adjusted net loss (after deducting applicable excesses, depreciation, and salvage values) and issues an electronic funds transfer (EFT) or cheque directly to the policyholder, or jointly to the policyholder and the hire-purchase financier/mortgagee bank named in the policy endorsement.

2. Repair

The insurer undertakes to repair the damaged property back to its pre-loss operational condition. This method is predominantly used in motor vehicle and engineering insurance:

PIAM Approved Repairers Scheme (PARS) : To ensure quality repairs, consumer protection, and cost standardization, insurers commonly require own-damage repairs to be carried out at workshops accredited under the PARS framework or on their panel. Approved workshops must meet equipment and workmanship standards, use computerized repair estimates, and give a warranty on repairs.

3. Replacement

Replacement involves the insurer providing an identical or substantially equivalent new item directly to the insured, rather than paying cash. This method is common for:

Plate Glass Insurance : Where insurers maintain bulk contracts with glazing contractors who replace shattered panes directly.

Retail Goods and Office Equipment : Where identical electronics, laptops, or machinery can be sourced from manufacturers at wholesale discount.

Jewelry and High-Value Articles : In all-risks policies where specialized jewellers craft or provide an equivalent replacement piece.

4. Reinstatement

Reinstatement refers specifically to the rebuilding, reconstruction, or structural repair of damaged buildings, or the complete replacement of plant and machinery on the same site. Reinstatement is governed by specific policy conditions:

Under a standard Reinstatement Value Clause , the insurer pays the full cost of rebuilding the structure to a condition substantially equal to, but not better or more extensive than, its condition when new, without deducting depreciation for age or wear.

The insured must commence rebuilding with reasonable dispatch, and work must comply with current municipal council (Pihak Berkuasa Tempatan - PBT) building bylaws.

Comparative Analysis of Settlement Methods

Settlement Method Primary Line of Business Key Operational Benefit Practical Consideration / Limitation

Cash Payment Fire, Personal Accident, Business Interruption Fast, flexible, administratively straightforward Insured may choose not to repair or replace the damaged item

Repair Motor Vehicle, Engineering, Contractors' All Risks Direct control over repair quality and standardized parts pricing Insurer bears responsibility for repair quality (managed via PARS)

Replacement Plate Glass, Domestic Burglary, Personal All Risks Insurer accesses commercial trade discounts; eliminates cash fraud Insured may dispute whether the replacement item is truly equivalent

Reinstatement Commercial Buildings, Industrial Property Restores industrial operating capacity without cash leakage Subject to local council building approvals, zoning rules, and inflation

Step 6: Post-Settlement Principles: Salvage and Subrogation

Once an insurer settles a total loss or replaces damaged property, two foundational doctrines of indemnity law come into operation:

Salvage Handling and Rights

When an insurer pays a claim on a total loss (constructive or actual) basis—such as compensating the full market value of a burnt motor vehicle or destroyed warehouse stock—the ownership of the damaged residual property ( the salvage ) transfers entirely to the insurer.

Under the principle of indemnity, the policyholder cannot claim full monetary compensation and retain the damaged wreckage. Retaining both would generate a financial profit from the misfortune, violating the core objective of indemnity. The insurer liquidates the salvage through authorized auctions or scrap metal processors to offset its gross claims payout.

Subrogation Recoveries

Subrogation is the equitable doctrine that entitles an insurer who has fully indemnified its insured to "step into the shoes" of the insured and pursue any legal remedies, damages, or financial recoveries available against a negligent third-party tortfeasor who caused the loss.

Key rules governing subrogation in Malaysia include:

The insurer exercises subrogation in the name of the insured , not in its own corporate name.

The insurer's recovery is strictly capped at the amount of indemnity actually paid to the insured. Any excess recovery beyond the claim payment and legal costs belongs to the insured.

The insured must provide full cooperation, executing documents and testifying in court if necessary, and must not compromise, waive, or release the third party from liability without the insurer's consent.

Step 7: Dispute Resolution Framework in Malaysia

When disputes arise over claim repudiation, the interpretation of exclusions, or the amount payable, policyholders have a structured, multi-tier route to resolution. [ DISPUTE RESOLUTION TIERS ]

  • |
  • +-------------------------------+-------------------------------+
  • | | |
  • [ 1. INTERNAL COMPLAINT ] [ 2. FINANCIAL MARKETS ] [ 3. CIVIL COURT ]
  • [ TO THE INSURER ] [ OMBUDSMAN SERVICE ] [ LITIGATION ]
  • Complaints unit and Free, independent scheme Sessions Court or
  • written final decision for claims up to RM 250,000 High Court
  • 1. Internal Complaint to the Insurer

BNM requires every licensed insurer to have an effective complaints-handling function. A dissatisfied policyholder first lodges a complaint and receives a written final decision , which must tell the complainant that the Financial Markets Ombudsman Service is available.

2. The Financial Markets Ombudsman Service (FMOS)

The Financial Markets Ombudsman Service (FMOS) took over from the Ombudsman for Financial Services (OFS) on 1 January 2025 . It is an independent, free dispute resolution scheme approved by Bank Negara Malaysia and the Securities Commission.

Key Operational Rules of FMOS:

Monetary Limit : FMOS hears disputes involving direct financial losses of up to RM 250,000 , covering motor, non-motor, travel and third-party property damage claims alike.

Exclusions : Claims for third-party bodily injury or death, commercial decisions such as pricing or underwriting, and disputes already in court are outside its scope.

Time Limitation : The dispute must reach FMOS within six (6) months of the insurer's final decision, or after the insurer fails to respond within 60 days of the complaint.

Process : A Case Manager first seeks a mediated settlement and may issue a Recommendation; either party may then refer the dispute to an Ombudsman for adjudication.

Binding Nature of Decisions : The Ombudsman's Decision is binding on the insurer . A complainant who rejects it remains free to take legal action in the civil courts.

3. Civil Court Litigation

Disputes above the FMOS limit, claims outside its scope (such as third-party bodily injury), and cases where the complainant rejects the Ombudsman's Decision are resolved through the Malaysian civil courts:

Sessions Court : Claims up to RM 1,000,000.

High Court : Claims exceeding RM 1,000,000 or involving complex legal interpretation.

Loading diagram... General Insurance Claims Lifecycle and Dispute Escalation