Study guide

6.1 Gas Laws

NAPT Navy Advanced Programs Test 2026

Track your progress as you read

Finished sections get a check mark.

1 Introduction

About the NAPT & Navy Nuclear Field Program NFa & NFb Qualification Routes and Scoring How to Use This Guide

2 Chapter 1: Mathematics I — Arithmetic & Algebra

1.1 Arithmetic, Fractions, Decimals & Percentages 1.2 Ratios, Proportions & Unit Conversions 1.3 Algebra I: Linear Equations & Inequalities 1.4 Algebra II: Exponents, Radicals & Quadratic Equations

3 Chapter 2: Mathematics II — Geometry, Trigonometry & Word Problems

2.1 Geometry: Area, Volume & Right Triangles 2.2 Trigonometry Basics 2.3 Word Problems & Multi-Step Reasoning

4 Chapter 3: Physics I — Mechanics & Energy

3.1 Kinematics & Motion 3.2 Forces & Newton's Laws 3.3 Work, Energy & Power

5 Chapter 4: Physics II — Thermodynamics, Electricity & Waves

4.1 Thermodynamics & Heat Transfer 4.2 Electricity: Ohm's Law & Series/Parallel Circuits 4.3 Kirchhoff's Laws & Magnetism 4.4 Waves, Fluids & Pressure

6 Chapter 5: Chemistry I — Atomic Structure & Reactions

5.1 Atomic Structure & the Periodic Table 5.2 Chemical Bonding & Reactions 5.3 Stoichiometry & the Mole Concept

7 Chapter 6: Chemistry II — Gas Laws, Solutions & Thermochemistry

6.1 Gas Laws 6.2 Solutions, Acids & Bases 6.3 States of Matter & Thermochemistry

8 Chapter 7: Nuclear Science

7.1 Atomic & Nuclear Structure, Isotopes 7.2 Radioactivity, Decay & Half-Life 7.3 Nuclear Fission, Chain Reactions & Critical Mass 7.4 Reactor Basics & Radiation Safety

9 Chapter 8: Administration Boundaries & Editorial Review

8.1 Administration Boundaries & Personal Readiness 8.2 Integrated Review & Local Practice

6.1 Gas Laws

Key Takeaways Explain This Topic AI

Boyle's Law (P1V1 = P2V2) describes an inverse pressure-volume relationship at constant temperature — compress a gas and its pressure rises.

Charles's Law (V1/T1 = V2/T2) and Gay-Lussac's Law (P1/T1 = P2/T2) both require absolute temperature in kelvin (K = °C + 273), never Celsius.

The Combined Gas Law (P1V1/T1 = P2V2/T2) merges all three relationships for problems where pressure, volume, and temperature all change at once.

The Ideal Gas Law, PV = nRT, adds the number of moles (n) and the gas constant R (0.0821 L·atm/mol·K), letting you solve for any one variable when the other three are known.

One mole of an ideal gas occupies 22.4 L at standard temperature and pressure (STP: 0°C, 1 atm) — a shortcut worth memorizing for quick calculations.

Last updated: August 2026

Editorial Scope

Gas laws connect pressure, volume, temperature, and amount in standard introductory science. This local section does not establish that gas laws appear on the NAPT, and its examples should not be read as descriptions of Navy equipment.

Units and a Critical Rule: Always Use Kelvin

Before touching any gas-law equation, convert temperature to the Kelvin (K) scale using:

K = °C + 273

Gas laws are built on the relationship between molecular kinetic energy and absolute temperature — a scale that starts at absolute zero (0 K, or -273°C), where molecular motion theoretically stops. Plugging a Celsius value directly into Charles's Law or Gay-Lussac's Law is one of the most common errors on STEM screening tests. Pressure is commonly given in atmospheres (atm) , kilopascals (kPa) , or millimeters of mercury (mmHg) , and volume in liters (L) . Standard temperature and pressure (STP) is defined as 0°C (273 K) and 1 atm.

Boyle's Law: Pressure and Volume

Boyle's Law states that at constant temperature and a fixed amount of gas, pressure and volume are inversely proportional — squeeze a gas into a smaller space and its pressure rises; let it expand and pressure drops.

P1V1 = P2V2

Hypothetical public-textbook example: Imagine 4.0 L of gas at 150 atm expanding to 3.0 atm at constant temperature in a simplified submarine-themed scenario. What idealized volume does the gas occupy at the lower pressure? This is a Boyle's-law exercise, not a Navy system specification or operating procedure.

  • P1 = 150 atm, V1 = 4.0 L, P2 = 3.0 atm
  • V2 = P1V1 ÷ P2 = (150 atm × 4.0 L) ÷ 3.0 atm = 200 L

The same small volume of highly compressed air expands to 50 times its original volume once the pressure drops to 1/50th, illustrating why high-pressure gas systems require careful safety controls.

Charles's Law: Volume and Temperature

Charles's Law states that at constant pressure, volume and absolute temperature are directly proportional — heat a gas and it expands; cool it and it contracts.

V1/T1 = V2/T2

Worked Example: A gas sample confined in a piston (free to move, so pressure stays constant) occupies 2.00 L at 25°C. If heated to 100°C, what is the new volume?

  • Convert: T1 = 25 + 273 = 298 K, T2 = 100 + 273 = 373 K
  • V2 = V1 × (T2 ÷ T1) = 2.00 L × (373 K ÷ 298 K) = 2.50 L
  • Gay-Lussac's Law: Pressure and Temperature

Gay-Lussac's Law states that at constant volume, pressure and absolute temperature are directly proportional — heating a gas in a sealed, rigid container raises its pressure.

P1/T1 = P2/T2

Worked Example: A rigid cylinder of nitrogen gas reads 4.00 atm at 15°C in a cold storage space. A nearby fire warms it to 45°C. What pressure does the gauge reach (volume unchanged)?

  • Convert: T1 = 15 + 273 = 288 K, T2 = 45 + 273 = 318 K
  • P2 = P1 × (T2 ÷ T1) = 4.00 atm × (318 K ÷ 288 K) = 4.42 atm

This is precisely why sealed pressure vessels — air flasks, aerosol cans, boiler drums — carry warnings against exposure to open flame: a rigid container cannot relieve rising pressure by expanding.

The Combined Gas Law

When pressure, volume, and temperature all change simultaneously (moles held constant), use the Combined Gas Law , which folds Boyle's, Charles's, and Gay-Lussac's Laws into one equation:

P1V1/T1 = P2V2/T2

Worked Example: A gas sample has a volume of 6.00 L at 2.00 atm and 300 K. It is compressed to 3.00 L and cooled to 250 K. What is the new pressure?

  • P2 = (P1 × V1 × T2) ÷ (T1 × V2) = (2.00 atm × 6.00 L × 250 K) ÷ (300 K × 3.00 L) = 3,000 ÷ 900 = 3.33 atm
  • The Ideal Gas Law: PV = nRT

The Ideal Gas Law adds the number of moles ( n ) and the universal gas constant ( R ) to link all four variables in a single equation:

PV = nRT

Use R = 0.0821 L·atm/(mol·K) when pressure is in atm and volume is in liters, or R = 8.314 J/(mol·K) when working in SI units (pascals and cubic meters).

Worked Example: How many liters does 2.50 mol of an ideal gas occupy at STP (273 K, 1.00 atm)?

V = nRT ÷ P = (2.50 mol × 0.0821 L·atm/mol·K × 273 K) ÷ 1.00 atm = 56.0 L

This confirms the standard shortcut: 1 mole of any ideal gas occupies 22.4 L at STP (56.0 L ÷ 2.50 mol = 22.4 L/mol).

Summary Table: Which Law Applies?

  • Law Held Constant Relationship Equation
  • Boyle's Law Temperature, moles P and V inversely proportional P1V1 = P2V2
  • Charles's Law Pressure, moles V and T directly proportional V1/T1 = V2/T2
  • Gay-Lussac's Law Volume, moles P and T directly proportional P1/T1 = P2/T2
  • Combined Gas Law Moles only All three vary together P1V1/T1 = P2V2/T2
  • Ideal Gas Law Nothing (adds moles) Links P, V, n, and T PV = nRT
  • Local Practice Checklist

Identify what's held constant first — that tells you which law to use.

Convert every temperature to Kelvin before plugging into an equation. This single step prevents the most common gas-law error.

Keep units consistent — if R = 0.0821 L·atm/(mol·K), pressure must be in atm and volume in L, not kPa or mL.

Sanity-check the direction of change — compressing a gas should never produce a smaller pressure; heating a rigid container should never produce a lower pressure. If your answer moves the wrong direction, recheck your algebra.

Boyle's Law: Volume vs. Pressure at Constant Temperature (PV = 12 L·atm)