Study guide

1.4 Algebra II: Exponents, Radicals & Quadratic Equations

NAPT Navy Advanced Programs Test 2026

Track your progress as you read

Finished sections get a check mark.

1 Introduction

About the NAPT & Navy Nuclear Field Program NFa & NFb Qualification Routes and Scoring How to Use This Guide

2 Chapter 1: Mathematics I — Arithmetic & Algebra

1.1 Arithmetic, Fractions, Decimals & Percentages 1.2 Ratios, Proportions & Unit Conversions 1.3 Algebra I: Linear Equations & Inequalities 1.4 Algebra II: Exponents, Radicals & Quadratic Equations

3 Chapter 2: Mathematics II — Geometry, Trigonometry & Word Problems

2.1 Geometry: Area, Volume & Right Triangles 2.2 Trigonometry Basics 2.3 Word Problems & Multi-Step Reasoning

4 Chapter 3: Physics I — Mechanics & Energy

3.1 Kinematics & Motion 3.2 Forces & Newton's Laws 3.3 Work, Energy & Power

5 Chapter 4: Physics II — Thermodynamics, Electricity & Waves

4.1 Thermodynamics & Heat Transfer 4.2 Electricity: Ohm's Law & Series/Parallel Circuits 4.3 Kirchhoff's Laws & Magnetism 4.4 Waves, Fluids & Pressure

6 Chapter 5: Chemistry I — Atomic Structure & Reactions

5.1 Atomic Structure & the Periodic Table 5.2 Chemical Bonding & Reactions 5.3 Stoichiometry & the Mole Concept

7 Chapter 6: Chemistry II — Gas Laws, Solutions & Thermochemistry

6.1 Gas Laws 6.2 Solutions, Acids & Bases 6.3 States of Matter & Thermochemistry

8 Chapter 7: Nuclear Science

7.1 Atomic & Nuclear Structure, Isotopes 7.2 Radioactivity, Decay & Half-Life 7.3 Nuclear Fission, Chain Reactions & Critical Mass 7.4 Reactor Basics & Radiation Safety

9 Chapter 8: Administration Boundaries & Editorial Review

8.1 Administration Boundaries & Personal Readiness 8.2 Integrated Review & Local Practice

1.4 Algebra II: Exponents, Radicals & Quadratic Equations

Key Takeaways Explain This Topic AI

Exponent rules: multiply same-base powers by ADDING exponents (a^m × a^n = a^(m+n)); divide by SUBTRACTING exponents (a^m ÷ a^n = a^(m−n)).

To simplify a radical, pull out the largest perfect-square factor: √72 = √(36 × 2) = 6√2.

Factor x² + bx + c by finding two numbers that multiply to c and add to b.

The quadratic formula, x = [−b ± √(b² − 4ac)] ÷ 2a, solves ANY quadratic equation — use it when factoring isn't clean or fast.

The discriminant (b² − 4ac) predicts the solution type before you finish solving: positive = two real solutions, zero = one repeated solution, negative = no real solutions.

Last updated: August 2026

Exponents, radicals, and quadratic equations extend the local algebra review and connect to standard introductory STEM formulas. Their inclusion is editorial and does not imply a published NAPT content blueprint.

Exponent Rules

An exponent tells you how many times a base is multiplied by itself. The core rules let you combine and simplify exponential expressions without expanding them fully:

  • Rule Formula Example
  • Product Rule a^m × a^n = a^(m+n) 3^2 × 3^3 = 3^5 = 243
  • Quotient Rule a^m ÷ a^n = a^(m−n) 5^6 ÷ 5^2 = 5^4 = 625
  • Power Rule (a^m)^n = a^(m×n) (2^3)^2 = 2^6 = 64
  • Zero Exponent a^0 = 1 (a ≠ 0) 7^0 = 1
  • Negative Exponent a^(−n) = 1 ÷ a^n 2^(−3) = 1/8

Worked example: Simplify (3^4 × 3^2) ÷ 3^3.

Apply the product rule inside the parentheses first: 3^4 × 3^2 = 3^6. Then apply the quotient rule: 3^6 ÷ 3^3 = 3^3 = 27.

A common shortcut error is adding all the exponents without subtracting for the division step (4 + 2 + 3 = 9, giving the wrong 3^9 = 19,683). Track each operation separately — multiplication adds exponents, division subtracts them.

Simplifying Radicals

A radical (the square root symbol, √) asks "what number, multiplied by itself, gives this value?" To simplify a radical, find the largest perfect-square factor of the number under the radical (the radicand ), pull its square root out front, and leave the rest under the radical.

Worked example: Simplify √72.

72 factors as 36 × 2, and 36 is a perfect square (6 × 6 = 36) — and it is the largest perfect-square factor of 72. So:

√72 = √(36 × 2) = √36 × √2 = 6√2

Using a smaller perfect-square factor first (like 9 or 4) still reaches the right final value, but takes an extra step: √72 = √(9 × 8) = 3√8, and √8 still has to be reduced further (√8 = 2√2) to arrive at the same fully-simplified 6√2. Always look for the largest perfect-square factor to simplify in one step.

Factoring Quadratic Expressions

A quadratic expression has the form ax² + bx + c. When a = 1, many quadratics factor into two binomials (x + p)(x + q), where p × q = c and p + q = b.

Worked example: Factor x² − 5x − 24.

You need two numbers that multiply to −24 and add to −5. Testing factor pairs of 24: 3 and −8 work, because 3 × (−8) = −24 and 3 + (−8) = −5.

x² − 5x − 24 = (x + 3)(x − 8)

Setting each factor equal to zero gives the equation's roots: x = −3 or x = 8.

The Quadratic Formula

Not every quadratic factors neatly with whole numbers. The quadratic formula solves any equation in the form ax² + bx + c = 0:

x = [−b ± √(b² − 4ac)] ÷ 2a

The expression under the radical, b² − 4ac, is called the discriminant . Its sign tells you what kind of solutions to expect before you even finish solving:

  • Discriminant Meaning
  • Positive Two distinct real solutions
  • Zero One repeated real solution
  • Negative No real solutions (two complex solutions)

Worked example: Solve 2x² + 3x − 5 = 0 using the quadratic formula.

Here a = 2, b = 3, c = −5.

  • Discriminant: b² − 4ac = 3² − 4(2)(−5) = 9 + 40 = 49
  • x = [−3 ± √49] ÷ (2 × 2) = (−3 ± 7) ÷ 4
  • x = (−3 + 7)/4 = 1, or x = (−3 − 7)/4 = −2.5
  • Factoring vs. the Quadratic Formula

Both methods always work on a quadratic that has real solutions, but they are not equally fast:

Factor first when a = 1 and the constant term has small, obvious factor pairs (as with x² − 5x − 24 above) — factoring is usually quicker.

Use the quadratic formula when the numbers don't factor cleanly, when a ≠ 1 and factoring would require guess-and-check with large numbers, or when you are not confident a clean factorization exists. The formula always works, even when factoring does not.

Check the discriminant before committing to factoring over the real numbers: if b² − 4ac is negative, no real factorization exists at all, and only the quadratic formula (yielding complex roots) applies.

Worked example (discriminant check): For 3x² + 2x + 5 = 0, the discriminant is 2² − 4(3)(5) = 4 − 60 = −56. Because this is negative, the equation has no real solutions — time spent trying to factor it would be wasted; recognizing the negative discriminant immediately tells you there is no real answer to find.