Study guide
1.4 Lien Law, Bond Claims, and Dispute Resolution
NASCLA Contractor Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Coverage Map & Exam Overview
Coverage Map & Exam Overview
2 Business Organization, Licensing & Law
1.1 Business Entity Types and Formation 1.2 NASCLA Trade-Exam Waiver and Agency Licensing Boundaries 1.3 Construction Contract Law and Types of Contracts 1.4 Lien Law, Bond Claims, and Dispute Resolution
3 Financial Management, Tax & Labor Law
2.1 Financial Statements, Job Costing, and Cash Flow 2.2 Payroll, Federal/State Tax, and Recordkeeping 2.3 Labor & Employment Law (FLSA, immigration/I-9, EEO) 2.4 Insurance, Surety Bonds, and Risk Management
4 Estimating, Bidding & Plan Reading
3.1 Reading Construction Drawings and Specifications (CSI MasterFormat) 3.2 Quantity Takeoff and Material Estimating 3.3 Bidding, Markup, Overhead, and Profit 3.4 Change Orders, Allowances, and Unit Pricing
5 Project Management & Scheduling
4.1 Project Delivery Methods and the Submittal/RFI Process 4.2 Scheduling (CPM, Bar Charts, Critical Path) 4.3 Quality Control, Inspections, and Closeout 4.4 Permits, Codes, and the Inspection Process
6 Construction Safety & OSHA (29 CFR 1926)
5.1 OSHA Administration, Recordkeeping, and the General Duty Clause 5.2 Fall Protection, Scaffolds, and Ladders 5.3 Excavation/Trenching, Electrical, and Hazard Communication 5.4 PPE, Fire Protection, Cranes, and Confined Spaces
7 General Requirements & Sitework
6.1 Division 01 General Requirements and Temporary Facilities 6.2 Surveying, Site Layout, and Excavation 6.3 Soils, Compaction, and Erosion/Sediment Control 6.4 Foundations, Footings, and Site Drainage
8 Concrete (CSI Division 03)
7.1 Concrete Materials, Mix Design, and Water-Cement Ratio 7.2 Formwork and Reinforcement Placement 7.3 Placing, Finishing, Curing, and Testing (slump, cylinders) 7.4 Concrete Defects, Joints, and Cold-Weather Practices
9 Masonry (CSI Division 04)
8.1 Masonry Units, Mortar Types (M/S/N/O), and Grout 8.2 Brick and CMU Bonds, Reinforcement, and Coursing 8.3 Lintels, Control/Expansion Joints, and Flashing 8.4 Masonry Estimating and Cold/Hot Weather Construction
10 Metals & Wood (CSI Divisions 05 & 06)
9.1 Structural Steel, Connections, and Welding/Bolting 9.2 Light-Gauge Metal Framing 9.3 Wood Framing, Species/Grades, and Fasteners 9.4 Engineered Wood, Trusses, and Load Paths
11 Thermal & Moisture Protection (CSI Division 07)
10.1 Waterproofing, Dampproofing, and Below-Grade Protection 10.2 Insulation, R-Values, and Vapor Barriers 10.3 Roofing Systems (steep-slope and low-slope) and Underlayment 10.4 Flashing, Sealants, and Air Barriers
12 Openings & Finishes (CSI Divisions 08 & 09)
11.1 Doors, Windows, Glazing, and Hardware 11.2 Gypsum Board, Plaster, and Framing 11.3 Flooring, Tile, and Acoustical Ceilings 11.4 Painting, Coatings, and Finish Schedules
13 Mechanical, Plumbing & Electrical Overview
12.1 Plumbing Systems, Fixtures, and DWV/Supply Basics 12.2 HVAC Systems and Load Concepts 12.3 Electrical Systems, Service, and NEC Basics 12.4 Coordination, Rough-In, and Energy Code
1.4 Lien Law, Bond Claims, and Dispute Resolution
Key Takeaways Explain This Topic AI
A mechanic's lien secures payment against improved private property; deadlines run from the date labor or materials were last furnished.
Lien waivers are conditional or unconditional and progress or final — never sign an unconditional waiver before payment clears.
A surety bond involves principal, obligee, and surety; the Miller Act requires payment and performance bonds on federal jobs over $100,000.
Public property cannot be liened, so unpaid subs pursue the payment bond instead, typically within 90 days of last furnishing.
Dispute resolution escalates negotiation to mediation (non-binding) to arbitration (usually binding) to litigation.
Last updated: June 2026
Mechanic's Liens
A mechanic's lien (also called a construction or materialman's lien ) is a security interest a contractor, subcontractor, or supplier records against the improved property to secure payment. Because state deadlines differ, this editorial section emphasizes the process , not one state's calendar: many states require a preliminary notice early in the job, a recorded claim of lien within a fixed period after last furnishing labor/materials, and a suit to foreclose within a later deadline or the lien expires.
Lien Process and Typical Deadlines
- Step Purpose Typical Window (varies by state)
- Preliminary / Pre-lien Notice Preserve lien rights ~20 days after first furnishing
- Notice of Intent to Lien Demand before recording Before filing
- Record Claim of Lien Create the lien 60-90 days after last work
- Suit to Foreclose Enforce the lien 6-12 months after recording
- Release / Satisfaction of Lien Clear title after payment On payment
Editorial practice point: deadlines run from the date labor or materials were last furnished , and missing the window forfeits lien rights even though the debt remains.
Lien Waivers — An Editorial Practice Check
Lien waivers exchanged at payment come in four forms. Confusing them is a practical risk.
- Waiver Type When Used Risk
- Conditional Progress With a progress payment Effective only when check clears
- Unconditional Progress After payment confirmed Waives rights immediately
- Conditional Final With final payment Effective when final check clears
- Unconditional Final Final payment confirmed Waives all rights now
Never sign an unconditional waiver before the money is in hand — it surrenders lien rights even if the check bounces.
Surety Bonds and Public Projects
A surety bond is a three-party agreement among the principal (contractor) , the obligee (owner) , and the surety . On federal public works, the Miller Act requires a payment bond and a performance bond on contracts over $100,000 . Many states copy it as a Little Miller Act . Because you cannot lien public property , an unpaid sub on a public job pursues the payment bond instead of a mechanic's lien — a useful legal distinction.
Bond Types and Claim Scenario
Bid bond: guarantees the bidder will sign the contract and furnish bonds (commonly 5-10% of bid).
Performance bond: guarantees completion to contract terms (often 100% of contract value).
Payment bond: guarantees payment of subs and suppliers.
Scenario: A second-tier subcontractor on a $2,000,000 federal courthouse is unpaid $48,000 . It cannot lien the courthouse, so it gives notice and files a Miller Act payment-bond claim , typically within 90 days of last furnishing and suit within one year .
Dispute Resolution Ladder
Disputes escalate from cheapest to most costly. Know the order and that mediation is non-binding while arbitration is usually binding .
- Method Binding? Decider Cost/Speed
- Negotiation No The parties Lowest
- Mediation No Neutral facilitator Low
- Arbitration Usually yes Arbitrator(s) Moderate
- Litigation Yes Judge/jury Highest
Many construction contracts mandate mediation then binding arbitration before litigation. An arbitration award is enforceable in court and offers limited appeal rights, which this guide contrasts with a mediator who has no power to impose a decision.