Study guide

5.1 OSHA Administration, Recordkeeping, and the General Duty Clause

NASCLA Contractor Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Coverage Map & Exam Overview

Coverage Map & Exam Overview

2 Business Organization, Licensing & Law

1.1 Business Entity Types and Formation 1.2 NASCLA Trade-Exam Waiver and Agency Licensing Boundaries 1.3 Construction Contract Law and Types of Contracts 1.4 Lien Law, Bond Claims, and Dispute Resolution

3 Financial Management, Tax & Labor Law

2.1 Financial Statements, Job Costing, and Cash Flow 2.2 Payroll, Federal/State Tax, and Recordkeeping 2.3 Labor & Employment Law (FLSA, immigration/I-9, EEO) 2.4 Insurance, Surety Bonds, and Risk Management

4 Estimating, Bidding & Plan Reading

3.1 Reading Construction Drawings and Specifications (CSI MasterFormat) 3.2 Quantity Takeoff and Material Estimating 3.3 Bidding, Markup, Overhead, and Profit 3.4 Change Orders, Allowances, and Unit Pricing

5 Project Management & Scheduling

4.1 Project Delivery Methods and the Submittal/RFI Process 4.2 Scheduling (CPM, Bar Charts, Critical Path) 4.3 Quality Control, Inspections, and Closeout 4.4 Permits, Codes, and the Inspection Process

6 Construction Safety & OSHA (29 CFR 1926)

5.1 OSHA Administration, Recordkeeping, and the General Duty Clause 5.2 Fall Protection, Scaffolds, and Ladders 5.3 Excavation/Trenching, Electrical, and Hazard Communication 5.4 PPE, Fire Protection, Cranes, and Confined Spaces

7 General Requirements & Sitework

6.1 Division 01 General Requirements and Temporary Facilities 6.2 Surveying, Site Layout, and Excavation 6.3 Soils, Compaction, and Erosion/Sediment Control 6.4 Foundations, Footings, and Site Drainage

8 Concrete (CSI Division 03)

7.1 Concrete Materials, Mix Design, and Water-Cement Ratio 7.2 Formwork and Reinforcement Placement 7.3 Placing, Finishing, Curing, and Testing (slump, cylinders) 7.4 Concrete Defects, Joints, and Cold-Weather Practices

9 Masonry (CSI Division 04)

8.1 Masonry Units, Mortar Types (M/S/N/O), and Grout 8.2 Brick and CMU Bonds, Reinforcement, and Coursing 8.3 Lintels, Control/Expansion Joints, and Flashing 8.4 Masonry Estimating and Cold/Hot Weather Construction

10 Metals & Wood (CSI Divisions 05 & 06)

9.1 Structural Steel, Connections, and Welding/Bolting 9.2 Light-Gauge Metal Framing 9.3 Wood Framing, Species/Grades, and Fasteners 9.4 Engineered Wood, Trusses, and Load Paths

11 Thermal & Moisture Protection (CSI Division 07)

10.1 Waterproofing, Dampproofing, and Below-Grade Protection 10.2 Insulation, R-Values, and Vapor Barriers 10.3 Roofing Systems (steep-slope and low-slope) and Underlayment 10.4 Flashing, Sealants, and Air Barriers

12 Openings & Finishes (CSI Divisions 08 & 09)

11.1 Doors, Windows, Glazing, and Hardware 11.2 Gypsum Board, Plaster, and Framing 11.3 Flooring, Tile, and Acoustical Ceilings 11.4 Painting, Coatings, and Finish Schedules

13 Mechanical, Plumbing & Electrical Overview

12.1 Plumbing Systems, Fixtures, and DWV/Supply Basics 12.2 HVAC Systems and Load Concepts 12.3 Electrical Systems, Service, and NEC Basics 12.4 Coordination, Rough-In, and Energy Code

5.1 OSHA Administration, Recordkeeping, and the General Duty Clause

Key Takeaways Explain This Topic AI

Construction is governed by 29 CFR 1926; 1910 applies only where referenced or 1926 is silent.

Report fatalities within 8 hours; report in-patient hospitalizations, amputations, or eye losses within 24 hours.

Form 300A annual summary must be posted Feb 1 through Apr 30; records retained 5 years.

General Duty Clause 5(a)(1) covers recognized hazards lacking a specific standard.

Willful and Repeat penalties run roughly 10x a Serious violation; advance notice of inspection is illegal.

Last updated: June 2026

The Occupational Safety and Health Administration (OSHA) enforces workplace safety under the Occupational Safety and Health Act of 1970 . Construction work is governed by 29 CFR 1926 (Safety and Health Regulations for Construction). General industry rules in 29 CFR 1910 apply only where 1926 is silent and 1910 is referenced. For these editorial construction-safety examples, begin with the relevant 1926 Subpart and confirm its scope and any incorporated 1910 provision.

The General Duty Clause, Section 5(a)(1) , requires each employer to furnish a workplace "free from recognized hazards" likely to cause death or serious physical harm. It is OSHA's catch-all citation tool used when no specific standard addresses a hazard. Section 5(a)(2) requires compliance with specific standards. Memorize: 5(a)(1) = recognized hazards with no specific rule; 5(a)(2) = the written standards themselves.

OSHA may inspect without advance notice. Giving advance notice of an inspection is a federal crime. Inspection priority order is a frequent trap. Memorize this ranking:

  • Priority Trigger
  • 1 Imminent danger
  • 2 Fatality or catastrophe (hospitalization)
  • 3 Worker complaints / referrals
  • 4 Programmed (targeted/random) inspections
  • 5 Follow-up inspections

Note that imminent danger ranks above a fatality — the logic is preventing the next death outranks investigating one that occurred.

Reporting timelines changed in 2015 and are included here for reference-navigation practice. Report a work-related fatality within 8 hours . Report any in-patient hospitalization, amputation, or loss of an eye within 24 hours . The old "3 or more hospitalized" threshold is obsolete — a single hospitalization now triggers the 24-hour report. Reports go to the OSHA Area Office, the 1-800-321-OSHA line, or the online portal.

Recordkeeping (29 CFR 1904): Employers with more than 10 employees must keep injury/illness logs unless in a low-hazard exempt industry (construction is NOT exempt). The three forms: Form 300 (Log of Work-Related Injuries and Illnesses), Form 300A (Annual Summary), and Form 301 (Injury and Illness Incident Report). Form 300A must be posted from February 1 to April 30 each year, even if there were zero recordable cases. Records are retained 5 years .

A case is recordable if it involves death, days away from work, restricted work/transfer, medical treatment beyond first aid, loss of consciousness, or a significant diagnosed injury/illness. First aid (e.g., bandages, non-prescription medication at OTC dosage, single hot/cold compress) is NOT recordable. Distinguishing first aid from medical treatment is a useful editorial practice distinction.

Penalty categories (post-inflation adjustment): Other-than-Serious and Serious violations carry a maximum near $16,000+ per violation ; Willful and Repeat violations reach roughly $160,000+ per violation . Exact dollar figures adjust annually for inflation, so this editorial exercise compares the relative severity — Willful/Repeat are roughly 10x a Serious violation. A Willful violation is intentional or with plain indifference; Repeat means a substantially similar prior citation.

Worker rights under the Act: employees may file a complaint, request an inspection, review the OSHA log, and receive copies of their own medical/exposure records — all without retaliation (Section 11(c)). The OSHA poster ("Job Safety and Health: It's the Law") must be displayed where notices are customarily posted.