Study guide

0.1 NATE Certification Pathways: CHP-5 vs. Traditional Core & Specialty

NATE HVAC Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

0.1 NATE Certification Pathways: CHP-5 vs. Traditional Core & Specialty 0.2 Exam Logistics, Scoring, EPA 608 Prerequisites & Recertification 0.3 Effective Study Strategies & Recommended Field Test Preparation

2 Chapter 1: HVAC Fundamentals & Safety

1.1 Personal & Job-Site Safety, PPE, Lockout/Tagout, and OSHA Compliance 1.2 Specialized HVAC Hand Tools, Vacuum Pumps, Manifold Gauges, and Meters 1.3 Principles of Heat Transfer, Temperature Scales, and Heat Quantity Calculations 1.4 The Vapor Compression Refrigeration Cycle & Component Roles 1.5 Refrigerant Classifications, Recovery/Recycling, and EPA Section 608 Laws

3 Chapter 2: Electrical Theory, Controls & Troubleshooting

2.1 Electrical Fundamentals, Ohm's Law, and Circuit Configurations 2.2 Electric Motors, Capacitors, Relays, Contactors, and Starters 2.3 Low-Voltage Controls, Thermostats, Transformers, and Safety Switches 2.4 Reading HVAC Schematics, Ladder Diagrams, and Wiring Diagrams 2.5 Systematic Electrical Troubleshooting & Multimeter Diagnostics

4 Chapter 3: Comfort, Airflow & Psychrometrics

3.1 Fundamentals of Indoor Air Quality (IAQ) and Human Comfort Parameters 3.2 Psychrometric Chart Fundamentals: Dry-Bulb, Wet-Bulb, Dew Point & Humidity 3.3 Airflow Dynamics, Duct Static Pressure, Velocity, and CFM Calculations 3.4 Ductwork Design, Blower Performance Curves, and Air Balancing 3.5 Ventilation Standards, Filtration Ratings (MERV), and Humidity Control

5 Chapter 4: Equipment Installation & Commissioning

4.1 Equipment Placement, Clearances, Mounting, and Code Compliance 4.2 Refrigerant Piping, Copper Tubing Prep, Nitrogen Purge, and Brazing 4.3 Deep Vacuum Evacuation, Micron Gauges, and System Dehydration 4.4 Refrigerant Charging Methods: Superheat, Subcooling, and Weigh-In 4.5 System Commissioning, Startup Checks, and Combustion Analysis

6 Chapter 5: Service, Diagnostics & Preventive Maintenance

5.1 Systematic Troubleshooting Workflow & Problem Identification 5.2 Compressor Diagnostics, Mechanical Failures, and Electrical Faults 5.3 Air Conditioning & Heat Pump Service: Reversing Valves, Defrost & Metering Devices 5.4 Gas & Electric Heating Service: Ignition Controls, Heat Exchangers & Flame Sensors 5.5 Preventive Maintenance Protocols, Seasonal Tune-Ups, and Customer Service

0.1 NATE Certification Pathways: CHP-5 vs. Traditional Core & Specialty

Key Takeaways Explain This Topic AI

NATE is the premier non-profit certification body for HVACR technicians, recognized nationwide by contractors, manufacturers, and utility programs.

The Traditional NATE pathway requires passing a general Core exam (50 questions) alongside a discipline-specific Specialty exam (100 questions).

The Certified HVAC Professional (CHP-5) pathway breaks certification into 5 modular, 30-question exams taken sequentially as field experience grows.

CHP-5 lets technicians take the five domain exams in any order, with up to six months between each exam to study and prepare.

Both pathways result in full NATE certification and mandate recertification every two years through 16 Continuing Education Hours (CEHs) or re-examination.

Last updated: July 2026

NATE Certification Pathways: CHP-5 vs. Traditional Core & Specialty

North American Technician Excellence ( NATE ) is the nation's largest non-profit certification organization for heating, ventilation, air conditioning, and refrigeration ( HVACR ) technicians. Developed and supported by the entire HVACR industry, NATE certification verifies that a technician possesses the real-world practical knowledge and theoretical understanding necessary to install, service, and maintain modern climate control systems.

Earning NATE certification signals competency to contractors, homeowners, equipment manufacturers, and utility rebate programs. Research across the HVACR industry demonstrates that NATE-certified technicians experience fewer call-backs, achieve higher first-time fix rates, and command higher earning potential throughout their careers. Today, candidates can choose between two primary testing pathways to achieve NATE certification: the Traditional Core + Specialty Pathway and the Certified HVAC Professional (CHP-5) Pathway .

The Traditional NATE Pathway: Core + Specialty

The traditional NATE credentialing model requires candidates to pass two separate examinations: a single Core Examination and at least one Specialty Examination .

1. The NATE Core Examination

The Core exam tests basic candidate knowledge in fundamental engineering and trade skills common to all HVACR disciplines. It consists of 50 multiple-choice questions with a 1.5-hour time limit. Key domain areas covered on the Core exam include:

Safety Standards : OSHA guidelines, personal protective equipment (PPE), ladders, electrical safety, chemical handling, and pressuring testing safety.

Tools of the Trade : Proper usage of digital manifolds, micron gauges, multimeters, combustion analyzers, and hand tools.

Basic Electricity : Ohm's Law, Watt's Law, AC/DC current fundamentals, series and parallel circuits, and basic motor theory.

Trade Mathematics : Area, volume, unit conversions, temperature scales ( ∘ F ^\circ\text{F} ∘ F to ∘ C ^\circ\text{C} ∘ C ), and basic algebraic formulas.

Heat Transfer & Comfort Basics : Principles of conduction, convection, radiation, sensible vs. latent heat, and psychrometric concepts.

Construction & Fabrication Fundamentals : Basic piping, tubing, structural fastening, and sheet metal duct fitting identification.

Important Rule : Candidates must pass both the Core exam and a Specialty exam within a two-year window . If a candidate passes the Core exam but fails to pass a Specialty exam within two years, the Core exam credit expires and must be retaken.

2. The NATE Specialty Examinations

Specialty exams assess advanced diagnostic, installation, and troubleshooting capabilities in specific equipment disciplines. Each Specialty exam consists of 100 multiple-choice questions with a 2.5-hour time limit. Candidates can choose between Installation or Service tracks across various disciplines:

Air Conditioning (AC) : Comfort cooling systems, split systems, package units, and TXV/fixed-orifice metering devices.

Air Distribution (AD) : Airflow measurement, static pressure testing, duct design (ACCA Manual D basics), balancing, and blower performance.

Heat Pumps (Air-to-Air) : Reversing valve operation, defrost control logic, supplemental electric heat sequencing, and heat pump psychrometrics.

Gas Heating (GS) : Induced draft furnaces, condensing furnace sequence of operation, gas valve calibration, manifold pressure, and venting (Category I-IV).

Oil Heating (OL) : Oil burners, fuel pumps, nozzles, stack controls, oil furnace combustion diagnostics, and draft measurements.

Hydronics (Gas or Oil) : Boilers, circulator pumps, expansion tanks, radiant heating, and hydronic loop piping controls.

Candidates passing both the Core exam and a specific Specialty exam (e.g., Air Conditioning Service) earn official NATE Certification in that specialty discipline.

The CHP-5 Pathway: Certified HVAC Professional

Introduced to support technicians entering the field and to create a progressive learning curve, the Certified HVAC Professional (CHP-5) pathway replaces the single 150-question high-stakes barrier with five modular examinations . Rather than studying for an exhaustive Core and 100-question Specialty exam simultaneously, candidates take shorter, targeted tests that align with their career progression.

The Five CHP-5 Modules

Each CHP-5 module consists of 30 multiple-choice questions (1-hour time limit per module):

HVAC Fundamentals : Covers fundamental physical science, thermal dynamics, safety regulations, EPA awareness, and essential hand/power tools.

Electrical and Controls : Focuses on electrical safety, schematic reading, low-voltage control circuits, contactors, relays, transformers, and electric motor diagnostics.

Comfort and Airflow : Focuses on psychrometrics, indoor air quality (IAQ), external static pressure (ESP) measurement, duct velocity, and air balance.

Installation : Covers equipment placement, refrigeration piping, brazing techniques, condensate disposal, electrical supply wiring, venting, and initial system commissioning.

Service : Focuses on advanced diagnostic flowcharts, refrigeration cycle troubleshooting (subcooling/superheat), electrical fault detection, component replacement, and system tuning.

NATE allows candidates up to six months between each CHP-5 exam to study and prepare, and exams may be taken in any order (NATE recommends the published module order). Upon passing all five modules, the candidate earns full NATE Certification as a Certified HVAC Professional .

Comprehensive Comparison: CHP-5 vs. Traditional Pathway

The following table details the key differences between the two NATE pathways:

  • Feature / Attribute Traditional Core + Specialty CHP-5 Modular Pathway
  • Total Exam Structure 2 Exams (Core + 1 Specialty) 5 Modular Exams
  • Question Volume 150 Total (50 Core + 100 Specialty) 150 Total (30 per module)
  • Exam Duration 1.5 Hours (Core) + 2.5 Hours (Specialty) 1.0 Hour per module (5 Hours total)
  • Target Candidate Techs with 2+ years field experience Techs with 0–2 years experience / apprentices
  • Pacing & Timeline Must pass both within 2 years Up to six months allowed between each module

Credential Awarded NATE Specialty Certification (e.g., Heat Pump Service) NATE Certified HVAC Professional (CHP-5)

Retake Flexibility Must retake entire 50 or 100-question exam Retake only the specific 30-question module failed

  • Recertification 2-Year Cycle (16 CEHs or re-test) 2-Year Cycle (16 CEHs or re-test)
  • Senior Level & Advanced Credentials

Technicians who earn multiple Specialty certifications can pursue advanced NATE credentials:

Senior Level Efficiency Analyst : Requires active certifications in two service specialties (e.g., Air Conditioning Service AND Gas Heating Service) plus passing a specialized Senior Efficiency Analyst exam focusing on system performance, Manual J/S/D verification, and whole-house energy auditing.

Low-GWP Refrigerant Certification : Specialized credential covering A2L flammable refrigerants (R-454B, R-32), safety standards (ASHRAE 15/34, UL 60335-2-40), leak detection systems, and dedicated recovery procedures.

Loading diagram... NATE Certification Pathways Architecture