Study guide

8.2 ANSI S3.22 Electroacoustic Analysis & Specifications

Board Certified in Hearing Instrument Sciences BC-HIS

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Credential Overview & Exam Strategy

1.1 NBC-HIS Board Certification & NCE Exam Format 1.2 Clinical Study Framework & Pacing Strategy

2 Chapter 2: Patient Intake, Medical History, Auditory Disorders & Prevention

2.1 Case History Intake, Communication Needs & Family Dynamics 2.2 Ototoxic Medications & Systemic Medical Conditions 2.3 Outer and Middle Ear Pathologies 2.4 Inner Ear and Retrocochlear Pathologies 2.5 Noise Exposure History & Preventative Hearing Protection

3 Chapter 3: Medical Referral, Tinnitus & Patient Expectations

3.1 FDA Red Flags & Medical Referral Indications 3.2 Tinnitus Evaluation, Assessment & Hyperacusis 3.3 Patient Motivation, Readiness & Expectation Management 3.4 Auditory Deprivation, Unilateral Loss & Asymmetrical Hearing

4 Chapter 4: Otoscopy & Pure-Tone Audiometry

4.1 Otoscopic Inspection, Landmarks & Cerumen Assessment 4.2 Pure-Tone Air Conduction Audiometry & Transducers 4.3 Pure-Tone Bone Conduction Audiometry & The Occlusion Effect 4.4 Audiometric Synthesis: Degree, Configuration & Type of Loss

5 Chapter 5: Masking Theory and Clinical Protocols

5.1 Masking Principles & Interaural Attenuation 5.2 Air and Bone Conduction Masking Criteria 5.3 The Plateau Method, Overmasking & The Masking Dilemma

6 Chapter 6: Speech Audiometry & Immittance Testing

6.1 Speech Reception (SRT), Detection (SDT) & Threshold Agreement 6.2 Word Recognition Testing (WRS), PB-Max & Rollover 6.3 Immittance Audiometry, Tympanometry & Acoustic Reflexes

7 Chapter 7: Hearing Aid Form Factors, Acoustics & Components

7.1 Hearing Aid Form Factors & Style Candidacy 7.2 Acoustic Transducers, Microphones & Telecoils 7.3 Digital Signal Processing & Compression Architectures 7.4 Directionality, Noise Reduction & Frequency Lowering

8 Chapter 8: Prescriptive Targets, ANSI Specifications & Binaural Fitting

8.1 Prescriptive Fitting Rationales: NAL-NL2 vs. DSL v5 8.2 ANSI S3.22 Electroacoustic Analysis & Specifications 8.3 Binaural Amplification, Head Shadow & CROS/BiCROS Systems

9 Chapter 9: Ear Impressions, Earmold Physics, Probe-Mic & Sound-Field Verification

9.1 Ear Impression Materials & Techniques 9.2 Earmold Styles, Materials & Acoustic Modifications 9.3 Real-Ear Measurement (REM) & Probe-Microphone Physics 9.4 Speech Mapping Verification & Fitting Tolerances 9.5 Sound-Field Verification, Functional Gain & Aided Testing

10 Chapter 10: Programming, Fine-Tuning, Delivery & Troubleshooting

10.1 Hearing Instrument Programming & Patient-Driven Adjustments 10.2 Device Delivery, Orientation & Patient Handling 10.3 Troubleshooting, Maintenance, Listening Checks & Repairs

11 Chapter 11: Counseling, Aural Rehabilitation & Outcome Validation

11.1 Post-Fitting Counseling, Adjustment & Realistic Expectations 11.2 Aural Rehabilitation & Communication Strategies 11.3 Standardized Outcome Validation Measures (COSI, HHIE, IOI-HA)

12 Chapter 12: Assistive Technology, Regulatory Standards & Professional Ethics

12.1 Assistive Listening Devices (ALDs) & Wireless Connectivity 12.2 Regulatory Compliance: FDA Regulations, OTC Hearing Aids & HIPAA 12.3 NBC-HIS Code of Ethics, Scope of Practice & Interprofessional Collaboration

8.2 ANSI S3.22 Electroacoustic Analysis & Specifications

Key Takeaways Explain This Topic AI

ANSI S3.22 defines standardized electroacoustic measurement protocols and legal tolerance limits to verify that hearing aid performance matches manufacturer specifications for FDA compliance and quality assurance.

Testing requires an acoustic test box with a reference control microphone leveling loop and a standardized 2cc coupler: HA-1 for custom instruments and putty-sealed earmolds, HA-2 for traditional BTEs with earhooks/tubing, and HA-4 for thin-tube and RIC devices.

Key ANSI tolerances relative to manufacturer spec include: Maximum OSPL90 (≤ spec + 3 dB), HFA-OSPL90 (within ±4 dB), HFA-FOG (within ±5 dB), and Reference Test Gain (within ±5 dB).

Reference Test Gain (RTG) simulates conversational speech (60 dB SPL) and is established at the Reference Test Setting (RTS), defined as HFA-OSPL90 minus 77 dB (±1.5 dB).

Total Harmonic Distortion (THD) must not exceed the manufacturer specification by more than +3% (measured at 500, 800, and 1600 Hz, with exemptions under the 12 dB rule), and Equivalent Input Noise (EIN) must not exceed spec by more than +3 dB SPL.

Last updated: September 2026

8.2 ANSI S3.22 Electroacoustic Analysis & Specifications

Important

Hearing instrument specialists are legally and ethically mandated to perform quality assurance testing on all amplification devices prior to patient delivery, upon factory return from repair, and during routine troubleshooting. In the United States, electroacoustic performance standards are codified under ANSI/ASA S3.22 ( Specification of Hearing Aid Characteristics ), incorporated by reference into Food and Drug Administration (FDA) regulations at 21 CFR 801.422(d) — the current prescription hearing aid labeling rule, which adopts ANSI/ASA S3.22-2014 (R2020) and requires prescription technical specifications to be determined using its test procedures (21 CFR 801.422(c)(4)). The older citation 21 CFR 801.420 was removed by the FDA's 2022 OTC hearing aid final rule. Performing ANSI analysis confirms that an instrument operates safely, delivers undistorted acoustic output, and complies with manufacturer technical data sheets within enforceable legal tolerance thresholds.

Regulatory Framework and Quality Assurance

Electroacoustic analysis (EAA) in an acoustic test chamber isolates the physical performance of the hearing aid hardware from the acoustic variability of a human patient's ear canal.

Clinical and Legal Purposes of ANSI Verification:

Pre-Delivery Verification: Ensures a newly manufactured hearing instrument meets published engineering standards before being fitted on a patient.

Post-Repair Quality Control: Verifies that factory repairs restored the instrument to original factory specifications.

Objective Troubleshooting: Identifies microphone degradation, receiver diaphragm damage, excessive internal noise, or harmonic distortion when a patient reports weak, muffled, or distorted sound quality.

Regulatory and Legal Compliance: Confirms the instrument does not exceed maximum saturation output levels (OSPL90), protecting the patient against acoustic trauma and noise-induced permanent threshold shifts.

Test Instrumentation and Chamber Calibration

ANSI testing requires an Acoustic Test Chamber (Test Box) designed to provide sound isolation and an acoustically calibrated test environment. ACOUSTIC TEST BOX ARCHITECTURE

  • ┌──────────────────────────────────────────────┐
  • │ Acoustic Test Box │
  • │ │
  • │ ┌──────────────┐ │
  • │ │ Loudspeaker │ │
  • │ └──────┬───────┘ │
  • │ │ Test Stimulus │
  • │ ▼ (Swept tone / composite noise) │
  • │ ▲ │
  • │ │ 1-2 mm │
  • │ ▼ │
  • │ ┌─────┐ Control ┌──────────────┐ │
  • │ │ Ref │◄─────────►│ Hearing Aid │ │
  • │ │ Mic │ Leveling │ Microphone │ │
  • │ └─────┘ Loop └──────┬───────┘ │
  • │ │ Acoustic Output │
  • │ ▼ │
  • │ ┌──────────────┐ │
  • │ │ 2cc Coupler │ │
  • │ └──────┬───────┘ │
  • │ │ │
  • │ ▼ │
  • │ ┌──────────────┐ │
  • │ │ Measurement │ │
  • │ │ Microphone │ │
  • │ └──────────────┘ │
  • └──────────────────────────────────────────────┘
  • The Components of the Test Box

Loudspeaker: Generates pure-tone sweeps or broad-band composite noise test signals at calibrated sound pressure levels (50 to 90 dB SPL) across a frequency range of at least 200 Hz to 8000 Hz.

Reference Control Microphone: Positioned immediately adjacent (within 1 to 2 mm ) to the hearing aid's sound inlet (microphone). The reference mic continuously samples the acoustic output of the loudspeaker and feeds data back to the system via a dynamic leveling loop . If the chamber produces an acoustic standing wave or resonance peak, the leveling loop instantly adjusts loudspeaker voltage, ensuring the test signal delivered to the hearing aid microphone remains constant and calibrated.

Standardized 2cc Coupler: A precision-machined brass or stainless steel cavity with an internal acoustic volume of 2.0 cubic centimeters (cm³) . The 2cc volume was selected historically because it approximates the acoustic impedance of an average adult ear canal (including residual ear canal volume and tympanic membrane compliance) across the 1000 to 2000 Hz region.

Measurement Microphone: A calibrated laboratory microphone threaded into the base of the 2cc coupler, measuring the sound pressure level generated inside the cavity.

Standard 2cc Coupler Classifications

Selecting the correct coupler type is mandatory; utilizing the wrong coupler invalidates all electroacoustic measurements. 2cc COUPLER CLASSIFICATIONS

  • HA-1 COUPLER HA-2 COUPLER HA-4 COUPLER
  • (Direct / Custom / Putty) (BTE with Earhook) (Thin-Tube / RIC)
  • ┌─────────────────────────┐ ┌─────────────────────────┐ ┌─────────────────────────┐
  • │ │ │ │ │ │
  • │ [Custom Aid / Mold] │ │ [BTE Earhook] │ │ [RIC Receiver / │
  • │ │ │ │ │ │ │ Thin Tube] │
  • │ ▼ │ │ ▼ │ │ │ │
  • │ ┌─────────────────┐ │ │ ┌─────────────────┐ │ │ ▼ │
  • │ │ Acoustic Putty │ │ │ │ 25mm Rigid Tube │ │ │ ┌─────────────────┐ │
  • │ └────────┬────────┘ │ │ │ (#13 Tubing) │ │ │ │ Modified HA-1 │ │
  • │ │ │ │ └────────┬────────┘ │ │ │ or Custom Sleeve│ │
  • │ ▼ │ │ │ │ │ └────────┬────────┘ │
  • │ 2cc Cavity Volume │ │ 2cc Cavity Volume │ │ 2cc Cavity Volume │
  • │ │ │ │ │ │ │ │ │
  • │ ▼ │ │ ▼ │ │ ▼ │
  • │ Measurement │ │ Measurement │ │ Measurement │
  • │ Microphone │ │ Microphone │ │ Microphone │
  • └─────────────────────────┘ └─────────────────────────┘ └─────────────────────────┘

HA-1 Coupler (Direct Connection):

Features an open entrance without integrated tubing.

Used for all custom hearing instruments (ITE, ITC, CIC, IIC) and for BTE custom earmolds sealed directly to the coupler orifice using non-hardening acoustic sealing putty.

The canal tip of the custom shell must be aligned flush with the coupler sound inlet without allowing putty to occlude the sound bore or vent opening.

HA-2 Coupler (Traditional BTE with Earhook):

Features a rigid brass tubing segment measuring 25 mm in length and 1.93 mm in internal diameter , simulating standard #13 acoustic tubing and earhook impedance.

Used exclusively for traditional Behind-the-Ear (BTE) hearing aids fitted with an earhook.

HA-4 Coupler / Modified HA-1 Adapter:

Designed with specialized elastomeric adapters to couple Receiver-in-Canal (RIC) receiver spouts and thin-tube BTE systems directly into the 2cc cavity without acoustic leakage.

Preparing the Hearing Aid: ANSI Test Mode

Modern digital hearing aids employ sophisticated non-linear processing algorithms—including adaptive directional microphones, dynamic digital noise reduction (DNR), acoustic feedback cancellation (DFS), and frequency lowering (compression/transposition).

If ANSI testing is attempted while these adaptive features are active, the hearing aid will interpret pure-tone sweeps as acoustic feedback or ambient noise, dynamically altering gain and generating false measurement failures.

Mandatory Clinical Step: The specialist must place the hearing aid into "ANSI Test Mode" (or "Full-On Gain Test Mode") via manufacturer programming software. Test mode mutes adaptive features, sets the directional system to omnidirectional, locks digital compression into linear operation (or standardized test settings), and expands gain to full-on or reference test levels.

Standard Measurement Sequence, Metrics, and ANSI Tolerances

ANSI S3.22 defines an exact, sequential measurement protocol. Every parameter is governed by strict legal tolerance limits relative to the manufacturer's published technical specifications. ANSI S3.22 MEASUREMENT SEQUENCE

  • ┌────────────────────────────────────────────────────────────────────────┐
  • │ 1. MAXIMUM OUTPUT (OSPL90) │
  • │ • 90 dB SPL Input, Full-On Gain │
  • │ • Establishes Peak OSPL90 (≤ Spec + 3 dB) │
  • │ • Calculates HFA-OSPL90 (1000, 1600, 2500 Hz; ±4 dB) │
  • └───────────────────────────────────┬────────────────────────────────────┘
  • │
  • ▼
  • ┌────────────────────────────────────────────────────────────────────────┐
  • │ 2. FULL-ON GAIN (FOG) │
  • │ • 50 dB SPL Input, Full-On Gain │
  • │ • Measures Peak FOG and HFA-FOG (±5 dB) │
  • └───────────────────────────────────┬────────────────────────────────────┘
  • │
  • ▼
  • ┌────────────────────────────────────────────────────────────────────────┐
  • │ 3. REFERENCE TEST SETTING (RTS) & GAIN (RTG) │
  • │ • Target: HFA-OSPL90 - 77 dB (±1.5 dB) │
  • │ • Input: 60 dB SPL; Measures RTG (±5 dB) │
  • └───────────────────────────────────┬────────────────────────────────────┘
  • │
  • ▼
  • ┌────────────────────────────────────────────────────────────────────────┐
  • │ 4. FREQUENCY RESPONSE & RANGE (f1 to f2) │
  • │ • 60 dB SPL Input at RTS │
  • │ • Determine 20 dB down line from HFA response │
  • │ • Low cutoff f1 (≤ 1.25 f1,spec) and high cutoff f2 (≥ 0.8 f2,spec) │
  • └───────────────────────────────────┬────────────────────────────────────┘
  • │
  • ▼
  • ┌────────────────────────────────────────────────────────────────────────┐
  • │ 5. HARMONIC DISTORTION & NOISE FLOOR │
  • │ • Total Harmonic Distortion (THD) at 500, 800, 1600 Hz (≤ Spec + 3%)│
  • │ • Equivalent Input Noise (EIN = Lnoise - Gain) (≤ Spec + 3 dB) │
  • │ • Battery Current Drain at 1000 Hz, 65 dB SPL (≤ Spec + 20%) │
  • └────────────────────────────────────────────────────────────────────────┘
  • 1. Output Sound Pressure Level 90 (OSPL90)

Purpose: Measures the maximum acoustic saturation output the hearing aid can generate in the ear canal, protecting the user from acoustic discomfort or trauma.

Test Parameters: Gain control set to Full-On; input signal is a swept pure tone presented at 90 dB SPL .

Maximum OSPL90 (Peak OSPL90): The highest sound pressure level recorded across the entire frequency range.

ANSI Tolerance: Measured Maximum OSPL90 shall not exceed the manufacturer's specification by more than 3 dB (Upper limit only: measured ≤ Spec + 3 dB). There is no lower limit tolerance for maximum OSPL90.

High-Frequency Average OSPL90 (HFA-OSPL90): The arithmetic average of OSPL90 values measured at 1000 Hz, 1600 Hz, and 2500 Hz :

HFA-OSPL90 = (OSPL90_1000 + OSPL90_1600 + OSPL90_2500) / 3

(Note: If an instrument has a specialized narrow frequency response, Special Purpose Average [SPA] is utilized across three frequencies specified by the manufacturer separated by at least 2/3 octave).

ANSI Tolerance: Measured HFA-OSPL90 must be within ±4 dB of manufacturer specification .

2. Full-On Gain (FOG)

Purpose: Measures the maximum amplification capability of the instrument.

Test Parameters: Gain control set to Full-On; input signal is a swept pure tone presented at 50 dB SPL (to avoid saturating the amplifier).

High-Frequency Average Full-On Gain (HFA-FOG): The arithmetic average of acoustic gain (Output - Input) at 1000 Hz, 1600 Hz, and 2500 Hz.

ANSI Tolerance: Measured HFA-FOG must be within ±5 dB of manufacturer specification .

3. Reference Test Setting (RTS) and Reference Test Gain (RTG)

Purpose: Adjusts the hearing aid gain to a standardized setting simulating typical conversational speech listening levels (60 dB SPL input), providing an objective baseline for distortion, frequency response, and noise measurements.

Calculating the Reference Test Setting (RTS): The target HFA gain for the Reference Test Setting is defined mathematically as:

Target RTS Gain = HFA-OSPL90 - 77 dB

(The constant 77 dB is derived from a 60 dB speech input plus 17 dB to account for the peak crest factor of speech dynamics: 60 + 17 = 77 dB).

Setting Procedure:

The system delivers a 60 dB SPL input signal at the HFA frequencies.

The specialist (or automated software) reduces the gain control until the measured HFA gain matches (HFA-OSPL90 - 77 dB) within ±1.5 dB .

Full-On Exception Rule: If the hearing aid's maximum HFA-FOG is less than (HFA-OSPL90 - 77 dB), the volume control cannot be attenuated down to target; in this scenario, the RTS is defined as Full-On Gain .

Reference Test Gain (RTG): The measured HFA gain at the RTS setting.

ANSI Tolerance: Measured RTG must be within ±5 dB of manufacturer specification .

4. Frequency Response Curve and Frequency Range

Purpose: Delineates the usable acoustic bandwidth of the hearing instrument.

Test Parameters: Measured at Reference Test Setting (RTS) with a 60 dB SPL input (or 50 dB SPL if compression occurs at 60 dB SPL).

Method of Determining Frequency Range (f1 to f2):

Calculate the average response level in dB SPL at 1000, 1600, and 2500 Hz on the RTS frequency response curve.

Subtract 20 dB from this average. Draw a horizontal line across the graph at this decibel level (the "20 dB down" line).

The low-frequency cutoff (f1) is the lowest frequency at which the frequency response curve crosses the 20 dB down line.

The high-frequency cutoff (f2) is the highest frequency at which the frequency response curve crosses the 20 dB down line.

The Frequency Range is designated as f1 to f2 (e.g., 200 Hz to 6800 Hz). DETERMINING ANSI FREQUENCY RANGE

  • Response
  • (dB SPL)
  • 100 ┼
  • │ ╭──────────╮
  • 90 ┼ ╭────────╯ ╰────────╮
  • │ ╭────────╯ ╰───────╮
  • 80 ┼─────────╯ HFA Average Response (e.g., 85 dB) │
  • │ - - - - - - - - - - - - - - - - - - - - - - - - - - - ┼ - - - -
  • 70 ┼ │
  • │ ══════════════════════════════════════════════════════╪════════ "20 dB Down"
  • 60 ┼───────▲───────────────────────────────────────────────▲ Line (65 dB)
  • │ │ │
  • │ │ │
  • └───────┼───────────────────────────────────────────────┼────────
  • 200 Hz 6800 Hz
  • (f1) (f2)
  • Usable Bandwidth: 200 Hz to 6800 Hz

ANSI Tolerances:

Low-frequency limit (f1): Measured f1 ≤ 1.25 × f1,spec (or +1.25 octaves, whichever is larger).

High-frequency limit (f2): Measured f2 ≥ 0.8 × f2,spec (or -1.25 octaves, whichever is larger).

5. Total Harmonic Distortion (THD)

Purpose: Measures unwanted harmonic frequencies generated internally by the hearing aid amplifier, receiver, or transducer saturation when driven by pure-tone inputs.

Test Parameters: Measured at RTS.

  • 500 Hz presented at 70 dB SPL input
  • 800 Hz presented at 70 dB SPL input
  • 1600 Hz presented at 65 dB SPL input

The 12 dB Exemption Rule: If the frequency response curve rises by 12 dB or more between any distortion test frequency and its second harmonic (e.g., between 500 Hz and 1000 Hz, or 800 Hz and 1600 Hz), testing at that frequency is omitted . Under acoustic physics, high high-frequency gain naturally over-amplifies minute second-harmonic artifacts, yielding artificially inflated distortion figures.

ANSI Tolerance: Measured Total Harmonic Distortion shall not exceed the manufacturer specification by more than +3% (additive percentage; e.g., if spec is 2.0%, measured THD ≤ 5.0%).

6. Equivalent Input Noise (EIN)

Purpose: Quantifies the internal electronic noise floor generated by thermal agitation of electrons within the microphone and input pre-amplification circuitry.

Calculation: With the instrument at RTS, the sound input to the chamber is turned off (0 dB input). The total noise sound pressure level in the 2cc coupler (L_noise) is measured. The High-Frequency Average gain (HFA_gain) at RTS is then subtracted:

EIN = L_noise - HFA_gain

ANSI Tolerance: Measured EIN shall not exceed the manufacturer specification by more than +3 dB SPL .

Clinical Significance: Acceptable modern digital instruments exhibit EIN values below 25 to 28 dB SPL . If EIN exceeds 30 dB SPL, patients with normal low-frequency hearing will perceive an annoying continuous "hissing" or "water rushing" noise in quiet environments.

7. Battery Current Drain

Purpose: Verifies operational efficiency and estimates expected battery life.

Test Parameters: The instrument is powered by a regulated DC power supply battery pill matching the nominal cell voltage (1.30V for zinc-air). Measured at RTS with a 1000 Hz pure tone at 65 dB SPL input .

ANSI Tolerance: Current drain shall not exceed the manufacturer specification by more than +20% .

8. Telecoil Sensitivity (SPLITS)

Purpose: Evaluates inductive telecoil performance when coupled to telephone handsets or inductive loop systems.

Test Parameters: The instrument is placed in a Telephone Magnetic Field Simulator (TMFS) generating an alternating magnetic field of 31.6 milliamperes per meter (mA/m).

Metric: Coupler SPL for an Inductive Telephone Simulator (SPLITS) and HFA-SPLITS.

ANSI Tolerance: Measured HFA-SPLITS must be within ±6 dB of manufacturer specification .

ANSI S3.22 Tolerance Summary Matrix

  • Electroacoustic Parameter Input Level Gain Setting ANSI S3.22 Legal Tolerance Limit
  • Maximum OSPL90 (Peak) 90 dB SPL Full-On ≤ Manufacturer Spec + 3 dB (Upper limit only)
  • HFA-OSPL90 (1k, 1.6k, 2.5k Hz) 90 dB SPL Full-On Within ±4 dB of Manufacturer Spec
  • HFA-FOG (Full-On Gain) 50 dB SPL Full-On Within ±5 dB of Manufacturer Spec
  • Reference Test Gain (RTG) 60 dB SPL RTS Within ±5 dB of Manufacturer Spec
  • Frequency Range (f1 to f2) 60 dB SPL RTS f1 ≤ 1.25 f1,spec; f2 ≥ 0.8 f2,spec
  • Total Harmonic Distortion (THD) 70 / 65 dB RTS ≤ Manufacturer Spec + 3% (Subject to 12 dB rule)
  • Equivalent Input Noise (EIN) 0 dB (No input) RTS ≤ Manufacturer Spec + 3 dB SPL
  • Battery Current Drain 65 dB (1 kHz) RTS ≤ Manufacturer Spec + 20%
  • HFA-SPLITS (Telecoil) 31.6 mA/m 'T' Mode Within ±6 dB of Manufacturer Spec
  • Systematic Troubleshooting of Electroacoustic Failures ANSI TROUBLESHOOTING PROTOCOL
  • FAILED METRIC PROBABLE ROOT CAUSE CLINICAL REMEDIATION
  • ┌─────────────────┐ ┌─────────────────────┐ ┌─────────────────────┐
  • │ Elevated EIN │────────────►│ Debris in mic port; │────────────►│ Clean mic screens; │
  • │ (> Spec + 3 dB) │ │ moisture; bad preamp│ │ desiccate instrument│
  • └─────────────────┘ └─────────────────────┘ └─────────────────────┘
  • ┌─────────────────┐ ┌─────────────────────┐ ┌─────────────────────┐
  • │ Elevated THD │────────────►│ Receiver diaphragm │────────────►│ Check for wax plug; │
  • │ (> Spec + 3%) │ │ collision; low volt │ │ replace receiver │
  • └─────────────────┘ └─────────────────────┘ └─────────────────────┘
  • ┌─────────────────┐ ┌─────────────────────┐ ┌─────────────────────┐
  • │ FOG/OSPL90 Low │────────────►│ Occluded wax guard; │────────────►│ Replace wax filter; │
  • │ (> 4-5 dB down) │ │ blocked sound bore │ │ verify test mode │
  • └─────────────────┘ └─────────────────────┘ └─────────────────────┘
  • ┌─────────────────┐ ┌─────────────────────┐ ┌─────────────────────┐
  • │ Irregular Curve │────────────►│ Adaptive features on│────────────►│ Re-enter ANSI test │
  • │ / Low f2 Cutoff │ │ or coupler leak │ │ mode; reseal putty │
  • └─────────────────┘ └─────────────────────┘ └─────────────────────┘
  • Clinical Case Applications
  • Diagnostic Case 1: The Failing Equivalent Input Noise

Measurement: ANSI analysis on an ITE instrument shows HFA-OSPL90 is 114 dB (spec 115 dB), HFA-FOG is 42 dB (spec 44 dB), but EIN measures 34 dB SPL against a manufacturer specification of 26 dB SPL .

Analysis: The tolerance limit is Spec + 3 dB = 26 + 3 = 29 dB SPL. The measured 34 dB SPL exceeds legal tolerance by 5 dB. The patient complained of a persistent "hissing noise".

Remediation: Inspect the microphone opening under a stereomicroscope. Accumulated skin oils, moisture, or particulate matter on the microphone diaphragm creates turbulent acoustic resistance, driving up the thermal noise floor. If chemical desiccation fails, the microphone assembly must be replaced.

Diagnostic Case 2: Excessive Harmonic Distortion at 500 Hz

Measurement: A RIC instrument demonstrates THD of 7.5% at 500 Hz against a manufacturer specification of 2.0% . The frequency response curve rises 4 dB between 500 Hz and 1000 Hz.

Analysis: The 12 dB exemption rule does not apply (rise is only 4 dB). The tolerance limit is 2.0% + 3.0% = 5.0%. Measured 7.5% fails ANSI compliance.

Remediation: High low-frequency THD indicates mechanical clipping or receiver suspension failure (the magnetic armature is striking the pole pieces). Replace the RIC receiver assembly.