Study guide

8.2 Spinal Adjustive Techniques

NBCE Part III Examination Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 TMCQ, EMCQ, and DXI Formats 1.3 Study Plan and Timed Pacing

2 Case History: Complaint and Background

2.1 Chief Complaint 2.2 Present Illness (HPI) 2.3 Past History

3 Case History: Context and Systems Review

2.4 Family History 2.5 Personal and Social History 2.6 Review of Systems

4 Physical Examination: Core Systems

3.1 General Survey 3.2 Head and Neck Examination 3.3 Thorax and Lung Examination 3.4 Cardiovascular Examination

5 Physical Examination: Specialized Regions

3.5 Breast and Axilla Examination 3.6 Abdominal Examination 3.7 Urogenital Examination 3.8 Rectal Examination

6 Neuromusculoskeletal Examination

4.1 Posture and Gait Analysis 4.2 Spinal and Extremity Orthopedic Procedures 4.3 Standard Neurological Testing 4.4 Peripheral Vascular Examination

7 Diagnostic Imaging (Clinical Domain)

5.1 Imaging Indications and Contraindications 5.2 Patient Protection and Positioning 5.3 Normal Imaging Anatomy 5.4 Description and Interpretation of Images

8 Clinical Laboratory: Core Studies

6.1 Urinalysis 6.2 Hematology 6.3 Serology 6.4 Blood Chemistries

9 Clinical Laboratory: Special Studies

6.5 Stool Analysis 6.6 Joint Fluid Analysis 6.7 Electrophysiologic Recordings (EEG, ECG, EMG, and NCV)

10 Diagnosis or Clinical Impression

7.1 Clinical Impression from History 7.2 Clinical Impression from Physical and NMS Exam 7.3 Clinical Impression from Diagnostic Imaging 7.4 Clinical Impression from Lab and Special Studies

11 Chiropractic Techniques

8.1 Indications and Contraindications for Chiropractic Care 8.2 Spinal Adjustive Techniques 8.3 Extremity Adjustive Techniques 8.4 Skeletal Biomechanics

12 Supportive Interventions: Modalities, Nutrition, Exercise

9.1 Physiotherapy Modalities 9.2 Nutrition and Diet 9.3 Corrective Exercises and Rehabilitation

13 Supportive Interventions: Ergonomics, Education, Wellness

9.4 Protective Body Mechanics and Ergonomics 9.5 Patient Education and Self-Care 9.6 Wellness and Lifestyle Counseling

14 Case Management

10.1 Treatment Plan and Prognosis 10.2 Case Follow-up and Review 10.3 Patient Referral and Co-Management 10.4 Clinical Documentation and Informed Consent

15 DXI: Arthritic Disorders

11.1 DXI Degenerative Arthritic Disorders 11.2 DXI Inflammatory Arthritic Disorders 11.3 DXI Metabolic and Crystalline Arthropathy

16 DXI: Congenital Anomalies and Skeletal Variants

12.1 DXI Spinal Congenital Anomalies 12.2 DXI Extraspinal Skeletal Variants 12.3 DXI Scoliosis Imaging

17 DXI: Trauma

13.1 DXI Skeletal Trauma 13.2 DXI Soft Tissue Trauma

18 DXI: Tumors and Tumor-like Processes

14.1 DXI Benign Bone Tumors 14.2 DXI Primary Malignant Bone Tumors 14.3 DXI Metastatic Bone Disease 14.4 DXI Tumor-like Processes

19 DXI: Miscellaneous Osteoarticular

15.1 DXI Hematological and Vascular Bone Disease 15.2 DXI Bone and Joint Infections 15.3 DXI Nutritional and Metabolic Bone Disease 15.4 DXI Endocrine Bone Disease

20 DXI: Soft Tissue

16.1 DXI Chest Soft Tissue Findings 16.2 DXI Abdomen Soft Tissue Findings 16.3 DXI Miscellaneous Soft Tissue Findings

21 Exam Strategy and Common Traps

17.1 EMCQ Case Strategy 17.2 Timed Exam Strategy and Common Traps

8.2 Spinal Adjustive Techniques

Key Takeaways Explain This Topic AI

HVLA delivers a high-velocity, low-amplitude thrust into the paraphysiological space, producing cavitation via tribonucleation of dissolved synovial gas.

Every HVLA system shares core components: patient position, doctor stance, segmental contact point, line of drive, and pre-thrust tension/set-up.

Diversified technique uses varied patient positions and a listing system to derive contact point and line of drive; it is the default system for most Part III scenarios.

Gonstead technique emphasizes X-ray line analysis and a rotation-free line of drive, with distinctive knee-chest table and pelvic bench equipment.

Thompson technique uses a segmented drop-piece table and leg-length analysis, delivering a distraction-assisted thrust to a palpated 'terminal point.'

Last updated: July 2026

High-Velocity, Low-Amplitude (HVLA) Thrust Mechanics

A high-velocity, low-amplitude (HVLA) adjustment is a specific, controlled manual thrust delivered at or just beyond a joint's passive end range of motion, characterized by high speed of force application and a very small (low-amplitude) displacement of the joint itself. The goal is to move the joint a short distance, quickly, into what has been described as the paraphysiological space -- a small zone beyond the normal passive range but short of the anatomic limit (ligamentous end-range) that produces the audible/palpable release, or cavitation.

Cavitation is the tribonucleation phenomenon in which a rapid drop in intra-articular pressure causes dissolved gas (largely carbon dioxide) within the synovial fluid to form a gas bubble, producing the characteristic joint 'crack' or 'pop.' Cavitation is associated with, but not strictly required for, a successful segmental release; it correlates with a measurable, temporary increase in joint range of motion and a drop in paraspinal muscle activity immediately following the thrust. A joint that has recently cavitated typically requires a refractory period of roughly fifteen to twenty minutes before it can cavitate again.

Every HVLA adjustment, regardless of named system (Diversified, Gonstead, Thompson, or others), is built from the same core components that Part III exams isolate individually:

Patient position : the posture (side-posture, prone, supine, seated) that pre-tensions the joint and locks out segments above/below the target to localize force

Doctor position/stance : body mechanics that allow the doctor to deliver force through the body rather than the arms alone, protecting the doctor and improving accuracy

Segmental contact point : the specific bony landmark (e.g., mammillary process, transverse process, spinous process, articular pillar, pisiform contact) where force is applied

Line of drive (LOD) : the vector along which the thrust is delivered, determined by the facet plane and the direction needed to correct the identified joint restriction/listing

Pre-stress/tension (set-up) : taking the segment to its passive end range/tissue tension point before the thrust, minimizing the amplitude needed

The thrust : a high-velocity, low-amplitude, and typically low-force impulse delivered along the line of drive once set-up is complete

Because the amplitude of a correct HVLA thrust is small, most of the corrective force comes from precise localization (contact point and set-up) rather than from raw force -- a distinction Part III frequently tests by pairing a described dysfunction with the most specific rather than the most forceful corrective option.

Segmental contact selection follows the local anatomy available at each region: the mammillary process and transverse processes are the common lumbar contacts, the transverse and articular processes are used in the mid-to-lower thoracic spine, the articular pillar is the typical cervical contact, and the spinous process is used for some central thoracic and lumbar techniques. The part of the doctor's hand used to contact the patient -- pisiform, hypothenar, thenar, or a reinforced index/thumb contact -- is chosen to match the size and orientation of the target bony landmark and to allow the force to be delivered cleanly along the line of drive without slipping or spreading force to adjacent segments.

Named Technique Systems at the Part III Level

Part III does not test brand-name marketing claims; it tests the underlying biomechanical logic each system uses to select contact point, patient position, and line of drive.

Diversified Technique is the most broadly taught system and the de facto default against which Part III case scenarios are usually written. It uses a wide variety of patient positions (side-posture, supine, prone, seated) and a listing system (commonly a short letter code describing the segment's position, such as posterior, left/right, and superior/inferior relative to the segment below) to describe the direction of joint dysfunction and derive the corrective line of drive. Contacts vary by region -- a pisiform contact on the transverse process for a lumbar side-posture thrust, for example.

Gonstead Technique emphasizes an extensive, structured analysis before any thrust: static palpation, motion palpation, visualization, instrumentation (such as paraspinal thermography), and full-spine X-ray line analysis to identify a specific listing. Gonstead-specialized contacts are largely on the mammillary process (lumbar) or lateral mass, and the line of drive is deliberately kept free of a rotational component -- the classic Gonstead teaching is a straight posterior-to-anterior, lateral-to-medial vector without added rotation, intended to reduce shear at the facet. Gonstead uses distinctive equipment, including the knee-chest table (used for disc lesions and to unload the lumbar spine in patients who cannot tolerate prone positioning) and the Gonstead pelvic bench (a stepped table that allows a hip drop for side-posture work).

Thompson (Thompson Terminal Point) Technique uses a segmented drop-piece table: each section of the table is pre-tensioned to a specific resistance, and the doctor's thrust releases the table section a fraction of a second after force is initiated, adding a distraction/traction assist to the segment while reducing the force required from the doctor. Thompson technique pairs closely with a supine leg-length analysis used to identify which side or level is dysfunctional before the drop-thrust is applied. The doctor feels for a distinct terminal point -- the sensation of the joint reaching the endpoint of its available motion -- as the target endpoint of the thrust.

System Primary Analysis Tool Typical Contact Distinctive Feature

Diversified Motion/static palpation, listing system Varies by region (pisiform, thenar, etc.) Broadest range of positions/techniques; default system for most case scenarios

Gonstead Full-spine X-ray line analysis, static/motion palpation, thermography Mammillary process (lumbar), lateral mass Rotation-free line of drive; knee-chest table, pelvic bench

Thompson Supine leg-length/isolation testing Region-specific, table-assisted Segmented drop-piece table adds distraction assist; 'terminal point' end-feel