Study guide

8.6 Strengthening: Progressive Resistance Exercise & Loading Prescription

NBCE Physiotherapy Examination Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Clinical Foundations, Healing Physiology & Scope of Practice

1.1 NBCE Physiotherapy Examination & Scope of Practice 1.2 Tissue Healing Phases & Biological Repair Mechanisms 1.3 Pain Neurophysiology & Pain Modulation Theories

2 Chapter 2: Electrotherapy Foundations & Pain Modulation Modalities

2.1 Principles of Electricity, Waveforms & Current Density 2.2 Transcutaneous Electrical Nerve Stimulation (TENS) Modes & Protocols 2.3 Interferential Current (IFC) & Premodulated Current Therapy

3 Chapter 3: Neuromuscular Stimulation & Advanced Electrotherapy Modalities

3.1 Neuromuscular Electrical Stimulation (NMES) & Russian Stimulation 3.2 High-Voltage Pulsed Current (HVPC) & Microcurrent Electrical Therapy 3.3 Iontophoresis Biophysics, Pharmacology & Dosing Protocols

4 Chapter 4: Thermal Modalities — Cryotherapy & Superficial Heat

4.1 Cryotherapy Biophysics, Hunting Reaction & Clinical Protocols 4.2 Superficial Heat: Hydrocollator Moist Packs & Paraffin Bath 4.3 Fluidotherapy & Radiant Infrared Heat Modalities

5 Chapter 5: Therapeutic Ultrasound, Phonophoresis & Deep Heat

5.1 Ultrasound Biophysics, Frequency Selection & Beam Metrics (BNR & ERA) 5.2 Thermal vs. Non-Thermal Ultrasound & Treatment Parameters 5.3 Phonophoresis Protocols & Ultrasound-Electrotherapy Combination

6 Chapter 6: Mechanotherapy — Traction, Soft Tissue, Bracing & Taping

6.1 Cervical Mechanical Traction: Angles, Force Parameters & Protocols 6.2 Lumbar Mechanical Traction: Positioning, Force & Table Dynamics 6.3 Intermittent Pneumatic Compression, CPM & Mechanotherapy 6.4 Therapeutic Massage, Vibration & Trigger Point Therapy 6.5 Bracing & Orthotic Prescription 6.6 Therapeutic Taping: Rigid, McConnell & Elastic Techniques

7 Chapter 7: Hydrotherapy & Phototherapy (Light Therapy)

7.1 Hydrotherapy Principles, Whirlpool Therapy & Contrast Baths 7.2 Low-Level Laser Therapy (Photobiomodulation) & Biophysics 7.3 Ultraviolet Therapy (UVA/UVB) & Radiant Infrared Therapy

8 Chapter 8: Functional Assessment, Exercise Physiology & Muscle Rehabilitation

8.1 Exercise Physiology Foundations: Bioenergetics, Fiber Types & Muscle Contractions 8.2 Range of Motion, Therapeutic Stretching & PNF Techniques 8.3 Postural Syndromes, Janda's Classifications & Functional Movement Assessment 8.4 Gait Cycle Analysis & Pathological Gait Patterns 8.5 Neurobiology of Training: Motor Unit Recruitment, Neural Adaptation & Motor Learning 8.6 Strengthening: Progressive Resistance Exercise & Loading Prescription

9 Chapter 9: Neuromuscular Rehabilitation — Balance, Motor Control & Spine Stabilization

9.1 Spinal Stabilization Mechanics & Stuart McGill's Core Protocols 9.2 Cervical Spine Rehabilitation: Radiculopathy, Whiplash & Postural Syndromes 9.3 Lumbar Spine Rehabilitation: Disc Herniation, Stenosis & Spondylolisthesis 9.4 Balance, Postural Alignment & Sensorimotor Training 9.5 Coordinated Movement Patterns & Motor Control Retraining 9.6 Sacroiliac Joint & Pelvic Girdle Rehabilitation

10 Chapter 10: Extremity Rehabilitation, Clinical Safety & CPT Documentation

10.1 Upper Extremity Rehabilitation: Rotator Cuff, Impingement, Epicondylalgia & Carpal Tunnel 10.2 Lower Extremity Rehabilitation: Patellofemoral Pain, ACL, Achilles Tendinopathy & Plantar Fasciitis 10.3 Universal Modality Contraindications, Safety Screening & Red Flags 10.4 Physical Medicine CPT Coding (97000 Series), 8-Minute Rule & SOAP Documentation

11 Chapter 11: Endurance Training & Cardiovascular Rehabilitation

11.1 Aerobic Capacity, VO2max & Cardiorespiratory Adaptation 11.2 Aerobic Exercise Prescription: FITT-VP, Intensity Monitoring & Progression 11.3 Cardiovascular Rehabilitation: Risk Stratification, Phases & Safety Limits

8.6 Strengthening: Progressive Resistance Exercise & Loading Prescription

Key Takeaways Explain This Topic AI

Strengthening is one of two named sub-topics in the 11% Muscle Rehabilitation content area, the joint-largest weighting on the NBCE Physiotherapy Test Plan.

The DeLorme progressive resistance protocol uses three sets of ten at 50%, 75%, and 100% of the ten-repetition maximum, while the Oxford technique reverses that order.

Loads at or above roughly 85% of one-repetition maximum for two to six repetitions bias maximal strength; 67 to 85% for six to twelve repetitions biases hypertrophy.

The SAID principle means adaptation is specific to the imposed demand, including contraction type, velocity, range of motion, and joint angle.

Isometric strength gains are largely confined to about 20 degrees on either side of the trained joint angle, which limits their value as a sole strengthening method.

Last updated: September 2026

8.6 Strengthening: Progressive Resistance Exercise & Loading Prescription

Core Clinical Mandate: Muscle Rehabilitation (11%) names exactly two sub-topics — stretching and strengthening . Together with Neuromuscular Rehabilitation it ties for the second-largest weighting on the test plan. Strengthening questions are parameter questions: which contraction type, which chain, which load, how many repetitions, and how the load progresses.

Contraction Types and Their Force Characteristics

  • Contraction Muscle Length Relative Force Capacity Metabolic Cost Typical Rehabilitation Role
  • Isometric Unchanged Moderate Low Earliest safe loading; painful or immobilized joints; arthrogenic inhibition
  • Concentric Shortens Lowest of the three Highest per unit force General strengthening; force production

Eccentric Lengthens under load Highest — roughly 20 to 40% greater peak force than concentric Lowest per unit force Tendinopathy; deceleration control; late-stage loading

Isokinetic Varies at fixed angular velocity Accommodates to effort through range Moderate Testing and controlled training where equipment exists

Eccentric loading is the highest-force, lowest-cost option , which makes it uniquely effective for chronic tendinopathy and deceleration training — and also the most reliable producer of delayed onset muscle soreness , peaking 24 to 72 hours after an unaccustomed bout.

Isometrics: Useful but Angle-Specific

Isometric training produces strength gains that are largely confined to approximately 20 degrees on either side of the trained joint angle . Because of this "physiological overflow" limit, isometrics cannot serve as a complete strengthening program; a patient trained only at 60 degrees of knee flexion will not have gained meaningful strength at 10 degrees. They are, however, the right first choice when motion is contraindicated, when a joint is acutely painful, or when effusion is producing arthrogenic inhibition. Sustained isometric holds of roughly 30 to 45 seconds at moderate intensity also produce a useful analgesic effect in tendinopathy.

Blood Pressure Caution: Sustained maximal isometric contraction combined with breath-holding produces the Valsalva manoeuvre , sharply raising intrathoracic pressure and causing a marked rise in blood pressure followed by reduced venous return. Patients with hypertension, known cardiovascular disease, recent eye surgery, or abdominal wall weakness must be cued to exhale on exertion and avoid sustained maximal holds.

Open vs. Closed Kinetic Chain

  • Open Kinetic Chain (OKC) Closed Kinetic Chain (CKC)
  • Distal segment Free to move Fixed against a surface
  • Example Seated knee extension, biceps curl Squat, lunge, push-up, leg press
  • Muscle action More isolated, single-joint Multi-joint co-contraction of agonists and antagonists
  • Joint forces More shear , especially at end range More compression , which is generally better tolerated
  • Proprioceptive input Lower Higher; more functional

Clinical selection rules:

After ACL reconstruction , open-chain knee extension in the terminal 0 to 30 degrees produces the greatest anterior tibial shear and is the range traditionally restricted in early rehabilitation. Closed-chain squatting to about 60 to 70 degrees is generally better tolerated early.

In patellofemoral pain , patellofemoral joint contact pressure rises with increasing knee flexion in closed chain and with increasing extension in open chain . Working in a mid-range arc that avoids the painful zone in whichever chain is used is the practical solution.

Closed-chain exercise is not automatically superior. It is more functional, but open-chain work is the better tool when a specific muscle is inhibited and stronger synergists will otherwise substitute for it.

  • Classical Progressive Resistance Protocols
  • DeLorme (1945) — The Original PRE

Based on the patient's 10-repetition maximum (10 RM) , the greatest load that can be lifted exactly ten times with good form:

  • Set Load Repetitions
  • 1 50% of 10 RM 10
  • 2 75% of 10 RM 10
  • 3 100% of 10 RM 10

The first two sets act as a progressive warm-up. The 10 RM is retested periodically — classically weekly — and the loads recalculated.

Oxford Technique (Zinovieff)

The same three sets in reverse order : 100%, then 75%, then 50% of the 10 RM. The rationale is to load the muscle maximally while it is fresh and to reduce load as fatigue accumulates. The choice between DeLorme and Oxford is largely a matter of whether warm-up or fatigue accommodation matters more for the individual patient.

DAPRE (Daily Adjustable Progressive Resistive Exercise)

Knight's DAPRE removes the weekly retest by adjusting load within and between sessions based on performance:

  • Set Load Repetitions
  • 1 50% of working weight 10
  • 2 75% of working weight 6
  • 3 100% of working weight As many as possible
  • 4 Adjusted based on set 3 As many as possible

The number of repetitions achieved in set 3 determines the adjustment for set 4, and the repetitions in set 4 determine the working weight for the next session. Its advantage is that it self-corrects daily for the fluctuating strength typical of early rehabilitation.

Repetition-Maximum Loading Zones

  • Training Goal Load (% 1 RM) Repetitions Sets Rest Between Sets
  • Maximal strength ≥85% ≤6 2–6 2–5 minutes
  • Hypertrophy 67–85% 6–12 3–6 30–90 seconds
  • Muscular endurance ≤67% ≥12 2–3 ≤30 seconds
  • Power (single-effort) 80–90% 1–2 3–5 2–5 minutes
  • Power (multiple-effort) 75–85% 3–5 3–5 2–5 minutes

Reading the table correctly is the exam skill. Long rest periods go with heavy loads because the phosphagen system needs time to resynthesize ATP and creatine phosphate; short rest periods go with hypertrophy work because the accumulated metabolic stress is part of the stimulus. A question that pairs 85% of 1 RM with 30-second rests is describing an incoherent prescription.

Frequency and Volume

Two to three non-consecutive sessions per week per muscle group is the standard rehabilitation starting point, allowing 48 hours for recovery and protein synthesis.

Progressive overload requires that at least one variable increase over time: load, repetitions, sets, range, velocity, or stability demand — and preferably only one at a time, so cause and effect stay legible.

The 2-for-2 rule is a simple, defensible progression trigger: when the patient can complete two extra repetitions beyond the target on the final set in two consecutive sessions , increase the load.

The SAID Principle and Specificity

Specific Adaptation to Imposed Demands. Adaptation is specific to:

Muscle group and joint angle trained.

Contraction type — eccentric training produces greater eccentric than concentric gain.

Velocity — training slowly produces gains that are greatest at slow velocities.

Range of motion — training through a partial range produces gains concentrated in that range.

Energy system — heavy low-repetition work trains the phosphagen system; sustained work trains oxidative capacity.

Posture and context — strength developed seated does not fully transfer to standing under load.

The practical corollary: the closer the exercise resembles the demand the patient must return to, the greater the transfer. A roofer who must carry bundles up a ladder needs loaded carries and step-ups, not seated leg extensions.

Sequencing a Strengthening Program

Resolve the gate first. Effusion, acute pain, and arthrogenic inhibition block voluntary activation. Address them, or the strengthening simply will not take.

Begin with isometrics at a non-painful angle, adding sub-maximal holds and, where voluntary activation is poor, NMES as an adjunct.

Progress to concentric work through a pain-free range , typically light-load and higher-repetition at first to rebuild tolerance and technique.

Add eccentric loading once tissue tolerance permits — the key transition for tendinopathy and for deceleration control.

Move from open to closed chain and from single-joint to multi-joint as stability improves.

Add velocity, then reactive and plyometric demand , last of all, and only once eccentric control is demonstrably sound.

Re-measure. A strengthening program without repeated objective measurement — dynamometry, repetition maximum, single-leg hop symmetry, timed sit-to-stand — is not a program, it is an activity.

Sequencing Rule: Eccentric before plyometric, always. Plyometric training is a rapid stretch-shortening cycle that depends on the ability to absorb force eccentrically. Prescribing jumping to a patient who cannot control a slow single-leg lowering is how re-injury happens.

Special Populations

Older adults: resistance training is safe and highly effective; power (velocity) training has particular functional value for stair negotiation and fall avoidance. Begin conservatively and progress on demonstrated tolerance.

Osteoporosis: loading is beneficial for bone, but end-range spinal flexion under load is contraindicated because of vertebral compression fracture risk. Choose extension-biased and axially loaded patterns.

Hypertension and cardiovascular disease: avoid sustained maximal isometrics and Valsalva; use moderate loads, higher repetitions, controlled breathing, and rhythmic patterns.

Post-surgical patients: the surgeon's tissue-protection protocol overrides any general loading table.

Repetition-Maximum Continuum: Load vs. Repetitions by Training Goal