Study guide
9.3 Hydraulics: Sizing Swales, Ditches & Storm Conduits
North Carolina Land Surveyor NC PLS
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: North Carolina Statutory Authority & Board Administration (G.S. 89C & 21 NCAC 56)
1.1 The North Carolina State-Specific Exam: Format, Blueprint & Approved References 1.2 Statutory Framework & Board Organization (G.S. 89C & 21 NCAC 56) 1.3 Licensure Qualifications, Education & Experience Pathways (G.S. 89C-13(b)) 1.4 Professional Entity Organization, Firm Licensure & Business Rules 1.5 Continuing Professional Competency (CPC) & License Renewal
2 Chapter 2: Professional Conduct, Standard of Care & Board Enforcement
2.1 Rules of Professional Conduct (21 NCAC 56 .0701) & Advertising (.0702) 2.2 Responsible Charge, Direct Supervisory Control & Sealing (21 NCAC 56 .0701(d), .1101-.1103) 2.3 Qualifications-Based Selection (QBS) & Public Contracting (G.S. 143-64.31) 2.4 Disciplinary Procedures, Board Enforcement Powers & Penalties (G.S. 89C-21 & 89C-22)
3 Chapter 3: NC Standards of Practice for Land Surveying (21 NCAC 56.1600)
3.1 Surveying Procedures & the Record Examination Duty (21 NCAC 56 .1602(a)-(c)) 3.2 Classification of Boundary Surveys, Closure & Positional Accuracy (21 NCAC 56 .1603) 3.3 Monumentation, Tie Lines & Mapping Requirements (21 NCAC 56 .1602(d)-(h) & .1604) 3.4 Vertical Control, Topographic & Planimetric Mapping (21 NCAC 56 .1605 & .1606)
4 Chapter 4: North Carolina Plat Recording Laws & Review Officer Procedures (G.S. 47-30)
4.1 Plat Size, Reproducible Form, Title Contents & Required Plat Information (G.S. 47-30(a)-(f)) 4.2 The Surveyor Certificate, the Five (f)(11) Statements & Recording Exceptions 4.3 Review Officer Statutory Role, Powers & Certification Process (G.S. 47-30.2) 4.4 Geodetic Ties, Grid Coordinates & NC SPCS Connection (G.S. 47-30(f)(9) & 21 NCAC 56 .1602(g))
5 Chapter 5: North Carolina Boundary Law, Priority of Calls & Title History
5.1 The North Carolina Priority of Calls Hierarchy (Cherry v. Slade) 5.2 North Carolina Real Property History, Colonial Grants & the Granville District 5.3 Metes & Bounds Descriptions, Ambiguities & Deed Construction Rules 5.4 Processioning Proceedings & Boundary Dispute Resolution (G.S. Chapter 38)
6 Chapter 6: Adverse Possession, Easements, Rights-of-Way & Title Doctrines in NC
6.1 Adverse Possession & Color of Title under North Carolina Law (G.S. 1-38 & 1-40) 6.2 Real Property Claims Against the State & Public Prescriptive Immunity (G.S. 1-35) 6.3 Easements: Prescription, Implication, Necessity & Statutory Cartways (G.S. 136-68) 6.4 Public Road Dedication, Maintenance & Statutory Abandonment (G.S. 136-96)
7 Chapter 7: Riparian Rights, Water Boundaries & Coastal Surveying in North Carolina
7.1 Navigability, The Public Trust Doctrine & Riparian Rights (G.S. Chapter 146) 7.2 Non-Navigable Waters, Thread of the Stream (Filum Aquae) & Submerged Lands 7.3 Coastal Boundaries, Mean High Water Mark & Coastal Area Management Act (CAMA) 7.4 Water Boundary Movement: Accretion, Reliction, Erosion & Avulsion
8 Chapter 8: Geodetic Surveying, the NC Coordinate System & LIS/GIS Standards
8.1 The North Carolina State Plane Coordinate System (G.S. Chapter 102) & Grid Reductions 8.2 NCGS Real-Time Network & GNSS Survey Standards (21 NCAC 56 .1607) 8.3 Datums, Geoid Models & NSRS Modernization (NATRF2022 / NAPGD2022) 8.4 LIS/GIS Surveys, Classifications & the Board GIS Guidelines (21 NCAC 56 .1608)
9 Chapter 9: Incidental Streets, Drainage, Erosion Control & Stormwater (16% of the Exam)
9.1 Scope of Incidental Street & Storm Sewer Design (G.S. 89C-3(7) & the Board Guidelines) 9.2 Hydrology for Incidental Drainage: The Rational Method 9.3 Hydraulics: Sizing Swales, Ditches & Storm Conduits 9.4 Erosion & Sediment Control: The Sedimentation Pollution Control Act & 15A NCAC 04 9.5 Post-Construction Stormwater, SCMs & the NCDEQ Stormwater Design Manual 9.6 NCDOT Subdivision Roads Minimum Construction Standards
9.3 Hydraulics: Sizing Swales, Ditches & Storm Conduits
Key Takeaways Explain This Topic AI
Manning's equation in US customary units is Q = (1.486/n) A R^(2/3) S^(1/2), where R is the hydraulic radius A divided by the wetted perimeter and S is the slope of the energy grade line.
For a circular pipe flowing full, R equals D/4 and the equation reduces to Q = (0.463/n) D^(8/3) S^(1/2), which can be solved directly for the required diameter.
The NCDOT Subdivision Roads Minimum Construction Standards set a minimum cross pipe diameter of 18 inches and a minimum driveway pipe diameter of 15 inches.
Manning roughness is the single most influential input after slope: smooth concrete and smooth-interior HDPE run about 0.012 to 0.013, annular corrugated metal about 0.024, vegetated swales about 0.030 to 0.040, and riprap-lined ditches about 0.040 to 0.060.
The Board Guidelines exclude any drainage structure requiring special or structural design, any conduit selection for highway loads other than residential streets, and any surcharged storm sewer or pumping station, so the hydraulics permitted to a surveyor are gravity, open-channel, and standard-detail cases.
Last updated: August 2026
9.3 Hydraulics: Sizing Swales, Ditches & Storm Conduits
Section 9.2 produced a peak discharge. This section turns that number into a ditch section or a pipe diameter — the second half of the "level of hydrology and hydraulics necessary in the performance of incidental drainage" that the Board Guidelines permit inside a subdivision.
Keep the boundary in view throughout. Exclusion 5 removes any structure "requiring special or structural design," exclusion 7 removes conduit selection for highway loads other than residential streets, and exclusion 11 removes surcharged systems and pumping stations. Everything below assumes gravity flow, standard details, and residential loading .
1. Manning's Equation
For steady uniform flow in an open channel or a conduit flowing under gravity: Q = 1.486 n A R 2 / 3 S 1 / 2 V = 1.486 n R 2 / 3 S 1 / 2 Q = \frac{1.486}{n} A R^{2/3} S^{1/2} \qquad\qquad V = \frac{1.486}{n} R^{2/3} S^{1/2} Q = n 1.486 A R 2/3 S 1/2 V = n 1.486 R 2/3 S 1/2
- Term Meaning Units
- Q Discharge capacity cfs
- V Mean velocity ft/s
- n Manning roughness coefficient dimensionless
- A Cross-sectional area of flow ft²
- P Wetted perimeter — the length of channel boundary in contact with water ft
- R Hydraulic radius, R = A / P ft
- S Slope of the energy grade line (channel invert under uniform flow) ft/ft
The constant 1.486 is the unit conversion from the metric form; in SI the coefficient is 1.0. +-----------------------------------------------------------------------------+
- | MANNING ROUGHNESS COEFFICIENTS (n) |
- +----------------------------------------------+--------------------+---------+
- | Conduit or channel | Typical n | Use |
- +----------------------------------------------+--------------------+---------+
- | Smooth reinforced concrete pipe (RCP) | 0.012 - 0.013 | culverts|
- | Smooth-interior corrugated HDPE (N-12) | 0.012 - 0.013 | storm |
- | Corrugated metal pipe, annular | 0.024 - 0.027 | driveway|
- | Earth ditch, uniform and smoothly graded | 0.020 - 0.025 | diversion|
- | Vegetated grass swale (bermuda / fescue) | 0.030 - 0.040 | roadside|
- | Riprap-lined ditch | 0.040 - 0.060 | chute |
- +----------------------------------------------+--------------------+---------+
Important
Corrugated HDPE comes in two very different products. Smooth-interior dual-wall pipe carries n of about 0.012; single-wall corrugated pipe carries n closer to 0.024. Doubling n halves the capacity at a given size and slope, so specifying "HDPE" without saying which is not a specification at all.
2. Circular Pipe Flowing Full
For a circular pipe of internal diameter D (feet) flowing just full: A = π D 2 4 , P = π D , R = A P = π D 2 / 4 π D = D 4 A = \frac{\pi D^2}{4}, \qquad P = \pi D, \qquad R = \frac{A}{P} = \frac{\pi D^2/4}{\pi D} = \frac{D}{4} A = 4 π D 2 , P = π D , R = P A = π D π D 2 /4 = 4 D
Substituting into Manning's equation collapses it to a single-variable form: Q f u l l = 1.486 n ( π D 2 4 ) ( D 4 ) 2 / 3 S 1 / 2 = 0.463 n D 8 / 3 S 1 / 2 Q_{full} = \frac{1.486}{n}\left(\frac{\pi D^2}{4}\right)\left(\frac{D}{4}\right)^{2/3} S^{1/2} = \frac{0.463}{n} D^{8/3} S^{1/2} Q f u ll = n 1.486 ( 4 π D 2 ) ( 4 D ) 2/3 S 1/2 = n 0.463 D 8/3 S 1/2
Solved for diameter: D = ( Q n 0.463 S 1 / 2 ) 3 / 8 D = \left(\frac{Q n}{0.463 \, S^{1/2}}\right)^{3/8} D = ( 0.463 S 1/2 Q n ) 3/8
That R = D/4 identity is worth memorizing; it turns a two-unknown problem into a one-line solution and appears constantly on exams. +-----------------------------------------------------------------------------+
- | WORKED CALCULATION - SIZING A SUBDIVISION CROSS PIPE |
- | |
- | Required 25-year discharge ....................... Q = 18.5 cfs |
- | Reinforced concrete pipe ......................... n = 0.013 |
- | Pipe slope ....................................... S = 0.010 ft/ft (1.0%) |
- | |
- | Q = (0.463 / n) D^(8/3) S^(1/2) |
- | 18.5 = (0.463 / 0.013) x D^(8/3) x (0.010)^(1/2) |
- | 18.5 = 35.615 x D^(8/3) x 0.100 = 3.5615 D^(8/3) |
- | D^(8/3) = 18.5 / 3.5615 = 5.194 |
- | D = 5.194^(3/8) = 5.194^0.375 = 1.854 ft = 22.2 inches |
- | |
- | Select the next standard manufactured size: 24-inch RCP (D = 2.00 ft) |
- | Check: Q = 3.5615 x 2.00^(8/3) = 3.5615 x 6.350 = 22.6 cfs > 18.5 cfs OK |
- | |
- | Velocity check: A = pi(2.00)^2/4 = 3.14 sq ft |
- | V = Q/A at design flow = 18.5 / 3.14 = 5.9 ft/s -- within the usual |
- | 2.5 to 10 ft/s window, so no scour or siltation concern. |
- +-----------------------------------------------------------------------------+
Two habits the worked example demonstrates. Always round up to a manufactured size , never down, and always re-check capacity at the selected size — the rounding gives you the margin. And always check velocity , because a pipe that satisfies capacity can still fail: too slow and it silts in, too fast and the outlet scours.
3. Velocity Limits
- Condition Typical range
- Minimum self-cleansing velocity in a storm conduit (full or half-full) about 2.5 ft/s
- Maximum in a concrete pipe about 10 to 15 ft/s
- Maximum in a bare earth ditch about 2 to 4 ft/s , depending on soil
- Maximum in a well-established grass-lined swale about 4 to 6 ft/s
- Riprap or lined channel required above roughly 6 ft/s in erodible soil
Exceeding the channel limit is not just an erosion problem — it is a scope problem. An outlet needing an engineered energy dissipator, plunge pool, or structural apron slides into exclusion 5, "any major drainage ditch, storm culvert, branch, deep structure, catch basin, manhole, etc., requiring special or structural design."
4. Open-Channel Sections
For a trapezoidal channel of bottom width b, depth d, and side slope z (horizontal to 1 vertical): A = b d + z d 2 P = b + 2 d 1 + z 2 R = A P A = bd + zd^2 \qquad P = b + 2d\sqrt{1+z^2} \qquad R = \frac{A}{P} A = b d + z d 2 P = b + 2 d 1 + z 2 R = P A
For a triangular (V-ditch) section of depth d and side slope z: A = z d 2 P = 2 d 1 + z 2 A = zd^2 \qquad P = 2d\sqrt{1+z^2} A = z d 2 P = 2 d 1 + z 2
Design freeboard of roughly 0.5 foot above the design water surface is conventional in subdivision swales. Note also the erosion-control constraint in 15A NCAC 04B: ditches and channels used as erosion control measures shall be designed and constructed with side slopes no steeper than two horizontal to one vertical where vegetative cover is used for stabilization, unless soil conditions permit steeper slopes or mechanical or structural devices or ditch liners restrain accelerated erosion.
5. The NCDOT Minimums That Govern Subdivision Drainage
Where a subdivision street is to be added to the state system, the NCDOT Subdivision Roads Minimum Construction Standards control the drainage details. Two dimensions are absolute floors:
- Element NCDOT minimum
- Cross pipe (mainline drainage under the roadway) 18 inches diameter
- Driveway pipe 15 inches diameter
The manual also fixes minimum cover for longitudinal pipe lines and electric power primary at 3 feet , requires that all pipe culverts, storm sewers, and appurtenances be free of debris and silt build-up at acceptance, and prohibits headwalls intended merely to shorten a drainage structure or reduce right-of-way requirements. Subsurface drainage must be adequate to maintain a stable subgrade.
Caution
A hydraulic calculation can return a 12-inch pipe and still be wrong. Minimum sizes exist for maintenance access and clogging resistance, not hydraulics. Where computation and minimum standard disagree, the minimum standard governs — and where a local ordinance is stricter than NCDOT, the local ordinance governs.
6. Where the Hydraulics Stop
Situation Inside incidental design?
- Gravity storm sewer sized by Manning, standard RCP, standard NCDOT details Yes
- Roadside swale or V-ditch with grass lining and 2:1 or flatter side slopes Yes
- Driveway pipe at or above the 15-inch minimum Yes
- Backwater analysis through a FEMA regulatory floodway No — special design, exclusion 5
- Conduit selection for highway loading on a non-residential route No — exclusion 7
- A system designed to run surcharged, or any pump station No — exclusion 11
- An outlet requiring a structurally designed energy dissipator No — exclusion 5
- A detention embankment tall enough to be a dam No — exclusion 4
The pattern is consistent: uniform gravity flow with standard details is surveying; anything requiring structural analysis, pressurized behavior, or regulatory floodplain modeling is engineering.