Study guide
10.3 Container Rinsing & Disposal Programs
North Carolina Pesticide Applicator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Federal & North Carolina Pesticide Regulatory Framework
1.1 Federal Laws & Regulatory Agencies 1.2 North Carolina Pesticide Law of 1971 & NCDA&CS 1.3 North Carolina Applicator Licenses, Categories & Recertification 1.4 Compliance, Recordkeeping & Direct Supervision 1.5 The NCDA&CS Exams: Format, Fees, Scoring & Exam-Day Rules 1.6 Professionalism: Chemical Security, Risk Communication & Stewardship
2 Chapter 2: Pesticide Labeling & Legal Compliance
2.1 Label Components & Registration Numbers 2.2 Signal Words, Precautionary Statements & Toxicity Categories 2.3 Directions for Use, REI & Agricultural vs Non-Agricultural Statements 2.4 Safety Data Sheets (SDS) & Special Labeling Types
3 Chapter 3: Formulations, Adjuvants & Tank Mixing
3.1 Pesticide Types, Target Pest Groups & Modes of Action 3.2 Liquid Formulations: Chemistry, Performance & Handling 3.3 Dry & Specialty Formulations: Physical Characteristics & Safety 3.4 Adjuvants & Additives: Function, Chemistry & Selection 3.5 Tank Mixing Procedures, Compatibility & Jar Testing
4 Chapter 4: Human Toxicology & Exposure Hazards
4.1 Hazard, Toxicity & Exposure Principles 4.2 Routes of Exposure & Symptom Recognition 4.3 Cholinesterase Inhibition & Specific Chemical Hazards 4.4 First Aid & Emergency Medical Response
5 Chapter 5: Personal Protective Equipment (PPE) & Handler Safety
5.1 Work Clothing & Chemical-Resistant PPE Selection 5.2 Respiratory Protection & Fit Testing 5.3 PPE Maintenance, Cleaning & Decontamination 5.4 Heat Stress Prevention & Management
6 Chapter 6: Environmental Fate & Water Protection
6.1 Pesticide Movement & Environmental Fate 6.2 Groundwater & Surface Water Protection 6.3 Soil Characteristics & Leaching Vulnerability
7 Chapter 7: Protecting Non-Target Organisms & Drift Management
7.1 Spray Drift Management & Meteorological Factors 7.2 Pollinator Protection & Honey Bee Safety 7.3 Wildlife & Endangered Species Protection
8 Chapter 8: Application Equipment & Component Mechanics
8.1 Sprayer Types & Specialized Equipment 8.2 Spray Delivery Systems: Pumps, Agitators & Nozzles 8.3 Equipment Maintenance, Cleaning & Storage
9 Chapter 9: Equipment Calibration & Mathematical Calculations
9.1 Liquid Sprayer Calibration Math 9.2 Tank Mixing & Area Application Math 9.3 Granular Applicator Calibration & Area Math
10 Chapter 10: Safe Handling, Storage, Transportation & Disposal
10.1 Mixing, Loading & Spill Response 10.2 Storage Facility Safety & Security 10.3 Container Rinsing & Disposal Programs 10.4 Transportation & DOT Requirements
11 Chapter 11: Worker Protection Standard (WPS) & Integrated Pest Management (IPM)
11.1 Worker Protection Standard (WPS) Compliance 11.2 Restricted-Entry Intervals (REI) & Early-Entry Exceptions 11.3 IPM Principles & Strategies 11.4 Pest Identification & Action Thresholds
10.3 Container Rinsing & Disposal Programs
Key Takeaways Explain This Topic AI
An empty pesticide container is legally and operationally classified as hazardous waste until it is properly decontaminated through immediate triple-rinsing or pressure-rinsing.
Triple-rinsing requires draining the container for 30 seconds into the spray tank, filling 1/4 full of water, shaking vigorously for 30 seconds, draining into the tank for 30 seconds, and repeating the cycle 3 times.
Pressure-rinsing uses a specialized 40 PSI puncture probe rotated inside the inverted container over the spray tank for 30 to 60 seconds, achieving rapid and superior decontamination while simultaneously puncturing the container.
Open burning of pesticide containers, bags, and cardboard is strictly illegal under North Carolina air quality law (15A NCAC 02D .1900) because combustion produces highly toxic dioxins, furans, and hazardous chemical vapors.
The North Carolina Pesticide Disposal Assistance Program (PDAP), administered by NCDA&CS, provides free, non-regulatory collection and high-temperature incineration of unwanted, banned, or outdated pesticides.
Last updated: August 2026
10.3 Container Rinsing & Disposal Programs
Empty pesticide containers are never truly empty when the liquid flow ceases. Unrinsed plastic jugs, steel drums, and chemical bottles retain concentrated active ingredient residues adhering to internal walls, handles, corners, and cap threads—often accounting for 2% to 5% of the original container volume . Discarding unrinsed containers into municipal dumpsters or onto open ground violates the Resource Conservation and Recovery Act (RCRA) and North Carolina pesticide law, creating severe toxic exposure and environmental liabilities. Applicators must master standardized decontamination procedures, container recycling logistics, and state disposal assistance programs. +-----------------------------------------------------------------------------+
- | CONTAINER DECONTAMINATION & DISPOSAL FLOW |
- | |
- | [EMPTY CONTAINER AT SPRAY TANK] |
- | Drain concentrate into tank for 30 seconds until steady flow stops. |
- | | |
- | +---------------+---------------+ |
- | | | |
- | v v |
- | [OPTION A: TRIPLE-RINSING] [OPTION B: PRESSURE RINSING] |
- | - Add water 1/4 full - Use 40 PSI puncture probe |
- | - Cap & shake 30 seconds - Insert into bottom/side |
- | - Drain into tank 30 seconds - Rotate 360° over tank 30-60 sec |
- | - Repeat cycle 3 TIMES TOTAL - Drains directly into mix tank |
- | | | |
- | +---------------+---------------+ |
- | | |
- | v |
- | [PUNCTURE & DISABLE CONTAINER] |
- | Puncture bottom/sides; cut or crush to prevent reuse for water/food. |
- | | |
- | +---------------+---------------+ |
- | | | |
- | v v |
- | [NC PLASTIC RECYCLING (ACRC)] [NC PDAP (NCDA&CS AMNESTY)] |
- | Clean HDPE #2 jugs collected Free collection & incineration of |
- | for industrial re-manufacturing. outdated/banned/unlabeled pesticides. |
- | |
- | [STRICT PROHIBITION] |
- | OPEN BURNING OF PESTICIDE CONTAINERS IS ILLEGAL IN NORTH CAROLINA! |
- +-----------------------------------------------------------------------------+
- 1. The Core Rule: An Unrinsed Container is Hazardous Waste
Under federal RCRA regulations (40 CFR Part 261) and North Carolina Solid Waste Management rules, an unrinsed pesticide container that held a Toxicity Category I or II formulation (or an active ingredient on the EPA P-List of acutely hazardous wastes or U-List of toxic wastes) is legally classified as Hazardous Waste . Dumping unrinsed containers into regular municipal trash creates civil and criminal liabilities.
The Legal Exemption Through Proper Rinsing
When an applicator properly triple-rinses or pressure-rinses a container immediately upon emptying:
Over 99.99% of residual chemical is extracted and incorporated into the spray mix as usable active ingredient.
The container is legally reclassified from hazardous waste to non-hazardous solid waste .
The cleaned container becomes eligible for municipal landfill disposal or agricultural plastic recycling.
Important
Rinse Immediately While Mixing: Rinsing must be performed immediately at the time of tank mixing. If pesticide concentrates are allowed to dry inside an empty container for days or weeks, residues cake onto interior walls, becoming nearly impossible to dissolve and clean during subsequent rinsing attempts.
2. Standardized Decontamination Procedures
Applicators in North Carolina must execute one of two universally recognized rinsing methods for all rigid liquid pesticide containers (plastic jugs, bottles, steel drums):
Method 1: The Triple-Rinsing Procedure (Step-by-Step) +-----------------------------------------------------------------------------+
- | TRIPLE-RINSING PROTOCOL (3x30) |
- | |
- | [STEP 1: DRAIN] |
- | Invert container over spray tank opening; drain for 30 SECONDS until |
- | steady flow reduces to individual drips. |
- | |
- | [STEP 2: ADD RINSE WATER] |
- | Fill the empty container 1/4 to 1/5 FULL of clean water (or carrier). |
- | |
- | [STEP 3: SHAKE & ROTATE] |
- | Secure cap tightly. Vigorously shake and rotate container for 30 SECONDS |
- | so rinse water contacts all interior walls, handles, and threads. |
- | |
- | [STEP 4: DRAIN RINSATE INTO TANK] |
- | Remove cap and pour rinsate directly into the spray tank; drain 30 SECONDS|
- | |
- | [STEP 5: REPEAT TWO MORE TIMES] |
- | Repeat Steps 2 through 4 TWO ADDITIONAL TIMES (for a total of 3 rinses). |
- +-----------------------------------------------------------------------------+
- Method 2: The Pressure-Rinsing Procedure
Pressure-rinsing utilizes a specialized chemical-resistant probe or rotating nozzle attached to a pressurized clean water hose operating at 40 to 60 PSI .
Drain Initial Chemical: Invert container over the spray tank opening and allow concentrate to drain for 30 seconds.
Insert Probe: While holding the container upside down over the spray tank opening, firmly push the pointed pressure probe through the lower side or bottom of the plastic container.
Pressurized Wash: Activate the water valve at 40 PSI. Rotate the probe head 360 degrees inside the container for 30 to 60 seconds so high-velocity spray jets wash the top, shoulders, corners, and internal handle recesses.
Direct Rinsate Drainage: All rinsate flows continuously out of the container neck directly into the spray tank, adding into the carrier batch volume.
Cap Decontamination: Immerse and rinse container caps separately in a bucket of clean water and pour into the tank.
- Feature / Metric Triple-Rinsing Method Pressure-Rinsing Method
- Equipment Required Clean water supply, measuring bucket Pressurized probe nozzle (40 PSI line)
- Time Required 3 to 5 minutes per container 30 to 60 seconds per container
- Rinsing Efficacy >99.9% residue removal >99.99% residue removal (superior in corners/handles)
Puncture Action Requires separate manual puncture tool Automatically punctures container during probe insertion
3. Container Disablement, Recycling & Landfill Disposal
Once a container is thoroughly rinsed, it must be physically modified to prevent illegal and hazardous reuse. +-----------------------------------------------------------------------------+
- | CONTAINER DISPOSAL & RECYCLING PATHWAYS |
- | |
- | +---------------------------------------------------------------------+ |
- | | DECONTAMINATED CONTAINER (RINSING VERIFIED) | |
- | +---------------------------------------------------------------------+ |
- | | |
- | v |
- | [PUNCTURE BOTTOM & CUT OUT HANDLES] |
- | (Renders container unusable for water/food) |
- | | |
- | +-------------------+-------------------+ |
- | | | |
- | v v |
- | [NC AG CONTAINER RECYCLING (ACRC)] [SANITARY SOLID WASTE LANDFILL] |
- | - Triple/pressure-rinsed HDPE #2 - Accepted as non-hazardous |
- | - Caps and label booklets removed solid municipal waste |
- | - Recycled into industrial piping, - Check with local county |
- | marine pilings, highway sign posts landfill for bulk policies |
- +-----------------------------------------------------------------------------+
Puncturing and Disabling Containers:
Immediately following rinsing, the applicator must puncture the bottom and sidewalls of the container using a knife, probe, or axe, and cut out the handle. This physically destroys the container's liquid-holding capacity, preventing dangerous reuse by farmworkers or the public as water jugs, fuel containers, or livestock feeding buckets.
The North Carolina Agricultural Container Recycling Program:
Administered by the NCDA&CS , NC Cooperative Extension, and the Ag Container Recycling Council (ACRC) (operated by USAgNet).
Eligibility: Accepts clean, triple-rinsed or pressure-rinsed High-Density Polyethylene (HDPE #2) plastic pesticide jugs (1-gallon, 2.5-gallon, 5-gallon) and drums.
Preparation Requirements: Containers must be inspected and free of all chemical residue (inside and outside). Caps, foil heat-induction seals, and loose paper label booklets must be removed (glued labels can remain).
End Use: Recycled plastic flakes are remanufactured into non-consumer industrial products, including highway guardrail posts, underground drainage corrugated pipes, landscape edging, and marine pilings.
4. Strict Prohibition Against Burning Pesticide Containers
In North Carolina, burning empty pesticide containers, bags, cardboard shipping cartons, or chemical packaging is STRICTLY PROHIBITED BY STATE LAW . +-----------------------------------------------------------------------------+
- | WARNING: OPEN BURNING OF PESTICIDE CONTAINERS IS ILLEGAL |
- | |
- | [NORTH CAROLINA AIR QUALITY REGULATION 15A NCAC 02D .1900] |
- | |
- | - Burning pesticide plastics & bags generates highly toxic combustion |
- | byproducts: DIOXINS, FURANS, HYDROGEN CHLORIDE, and PHOSGENE. |
- | - Concentrated chemical residues in the plastic volatilize into toxic |
- | smoke plumes, causing severe inhalation toxicity to neighbors, |
- | livestock, and farm handlers. |
- | - Violations result in severe administrative fines up to $25,000 from |
- | NC Division of Air Quality and enforcement actions from NCDA&CS. |
- +-----------------------------------------------------------------------------+
Warning
Exam Trap: Historical vs. Modern Rules on Burning: In decades past, some pesticide labels permitted open burning of paper bags in remote agricultural fields. In North Carolina today, state environmental and air quality statutes supersede any outdated label language. Open burning of pesticide containers of ANY kind (plastic, paper, or cardboard) is 100% illegal in North Carolina.
5. North Carolina Pesticide Disposal Assistance Program (PDAP)
Growers, commercial applicators, structural pest controllers, and property owners frequently accumulate obsolete, banned, unidentifiable, or damaged chemical inventories. Disposing of these products through commercial hazardous waste contractors can cost thousands of dollars per drum.
What is the NC PDAP?
Initiated in 1980 and administered by the NCDA&CS Structural Pest Control and Pesticides Division , the Pesticide Disposal Assistance Program (PDAP) is the nation's premier state-sponsored pesticide collection service. +-----------------------------------------------------------------------------+
- | NORTH CAROLINA PESTICIDE DISPOSAL ASSISTANCE PROGRAM |
- | |
- | [CORE PRINCIPLES] |
- | - FREE TO PARTICIPANTS: No disposal fees or collection charges. |
- | - NON-REGULATORY AMNESTY: No fines, penalties, or enforcement actions. |
- | - ACCEPTS ALL PESTICIDES: Banned (DDT, chlordane), unlabeled, expired, |
- | deteriorated liquids, powders, and unknown agricultural chemicals. |
- | - SAFE DESTRUCTION: Transported by certified hazardous waste contractors |
- | for high-temperature rotary kiln incineration at EPA-permitted sites. |
- | |
- | [COLLECTION MECHANICS] |
- | - County-sponsored collection days organized with NC Cooperative Extension|
- | - On-farm site visits for large commercial / bulk liquid inventories. |
- +-----------------------------------------------------------------------------+
Key Operational Features of PDAP:
Amnesty & Non-Regulatory Nature: Applicators can surrender banned chemicals (e.g., DDT, dieldrin, toxaphene, methyl parathion) or deteriorated chemicals without fear of regulatory citations, inspections, or penalties.
Eligible Materials: Accepts all agricultural, commercial, structural, and turf pesticides, including insecticides, herbicides, fungicides, rodenticides, nematicides, and defoliants in both liquid and dry formulations.
Safe Ultimate Destruction: Collected waste is manifested and transported to licensed hazardous waste incinerators where it undergoes high-temperature rotary kiln incineration at temperatures exceeding 1,800°F–2,200°F, achieving complete molecular destruction into harmless base elements.