Study guide

1.3 Legal Descriptions and Surveys

North Carolina Real Estate Broker Exam

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

How This Guide Maps to the North Carolina Real Estate Exam

2 Introduction: North Carolina Real Estate Exam Overview

North Carolina Real Estate Exam Overview

3 National Portion: Chapter 1: Real Property Characteristics, Legal Descriptions & Property Use

1.1 Real Property vs. Personal Property 1.2 Physical and Economic Characteristics of Real Property 1.3 Legal Descriptions and Surveys 1.4 Land-Use Controls, Public & Private Restrictions, and Encumbrances

4 National Portion: Chapter 2: Forms of Ownership, Transfer & Recording of Title

2.1 Estates, Ownership Forms, Rights, and Interests 2.2 Deeds, Title Transfer, Title Insurance, and Recording

5 National Portion: Chapter 3: Property Value & Appraisal

3.1 The Concept of Value and Economic Principles 3.2 The Appraisal Process and USPAP Basics 3.3 Valuation Approaches (Sales Comparison, Cost, Income) and BPOs

6 National Portion: Chapter 4: Real Estate Contracts & Agency

4.1 Contract Types and Required Elements 4.2 Contract Performance, Breach, and Enforceability 4.3 Listing and Sales Contracts and Contingencies 4.4 Agency Relationships, Fiduciary Duties, and Disclosure

7 National Portion: Chapter 5: Real Estate Practice (Brokerage, Fair Housing, Risk)

5.1 Broker Responsibilities, Brokerage Agreements, and Compensation 5.2 Federal Fair Housing Law and Protected Classes 5.3 Advertising, Antitrust, and Risk Management

8 National Portion: Chapter 6: Property Disclosures & Environmental Issues

6.1 Property Conditions and Environmental Hazards 6.2 Disclosure Obligations, Stigmatized Property, and Liability

9 National Portion: Chapter 7: Financing & Settlement

7.1 Financing Concepts, Notes, Mortgages, and Deeds of Trust 7.2 Loan Types, Lender Requirements, PMI, and Mortgage Insurance 7.3 Federal Financing Regulations (RESPA, TILA, ECOA, TRID) 7.4 Settlement, Closing Statements, and Prorations

10 National Portion: Chapter 8: Real Estate Math Calculations

8.1 Area, Volume, and Valuation Calculations 8.2 Commission, Financing, and Interest Calculations 8.3 Proration, Transfer Tax, and Investment Math

11 Chapter 1: North Carolina Real Estate Commission & Licensing

1.1 North Carolina Real Estate Commission (NCREC) Overview 1.2 North Carolina License Requirements 1.3 Provisional Brokers and Broker-in-Charge Supervision 1.4 License Maintenance and Renewal

12 Chapter 2: North Carolina Agency Law

2.1 Agency Relationships in North Carolina 2.2 Dual Agency and Designated Agency 2.3 Seller Subagency and Cooperation 2.4 Commission and Compensation Rules

13 Chapter 3: North Carolina Contracts & Disclosures

3.1 North Carolina Offer to Purchase and Contract 3.2 North Carolina Property Disclosure Requirements 3.3 Trust Account Requirements 3.4 North Carolina Closing Procedures

14 Chapter 4: North Carolina Property Law & Special Topics

4.1 North Carolina Fair Housing Laws 4.2 License Law Violations and Discipline 4.3 North Carolina Property Rights and Ownership 4.4 Environmental Issues and Special Topics

1.3 Legal Descriptions and Surveys

Key Takeaways Explain This Topic AI

The three legal-description methods are metes and bounds, rectangular (government) survey, and lot and block (recorded plat).

Metes and bounds uses a point of beginning (POB) and must return to it to close the boundary.

A section is 1 mile square = 640 acres; a township is 6 miles square = 36 sections.

One acre = 43,560 square feet; this conversion drives almost every land math question.

Lot and block (subdivision plat) is the most common method for platted residential lots.

Last updated: June 2026

Why Legal Descriptions Exist

A street address is not a legal description. A legal description identifies land so precisely that a surveyor could locate its exact boundaries and no other parcel could match. Deeds, mortgages, and contracts rely on them. There are three accepted systems in the U.S.

Metes and bounds — the oldest method, using distances (metes) and directions/boundaries (bounds).

Rectangular (government) survey — a grid of principal meridians and base lines dividing land into townships and sections.

Lot and block (recorded plat) — references a lot and block number on a subdivision map recorded in the county — the most common method for modern residential lots.

Metes and Bounds

A metes-and-bounds description starts at a point of beginning (POB) , follows a series of courses (each a direction and distance), and must return to the POB to enclose the parcel. If it does not close, the description is defective.

Monuments — physical or natural markers like an iron pin, a road, or a stream — may anchor the description. When a monument conflicts with a stated distance, monuments generally control over measurements because they are visible and fixed.

Trap: The exam may give a description that never returns to the POB and ask what is wrong. The answer is that the boundary does not close . Always confirm the final call ends at the point of beginning.

Rectangular (Government) Survey

The rectangular survey divides land using principal meridians (north-south) and base lines (east-west). The grid produces these key units:

  • Unit Size Contains
  • Township 6 mi × 6 mi (36 sq mi) 36 sections
  • Section 1 mi × 1 mi (1 sq mi) 640 acres
  • Quarter section 1/2 mi × 1/2 mi 160 acres
  • Quarter-quarter 1/4 mi × 1/4 mi 40 acres
  • Acre — 43,560 sq ft

Sections within a township are numbered 1–36 in a boustrophedonic (snake) pattern : Section 1 is the northeast corner, numbering runs west to 6, drops down, then runs east, alternating each row, ending with Section 36 in the southeast corner.

Worked Acreage Math

To find acres in a fractional section, multiply the fractions and then multiply by 640 .

Example 1: The NW 1/4 of the SE 1/4 of a section. Multiply the fractions: 1/4 × 1/4 = 1/16.

Acres = 1/16 × 640 = 40 acres .

Example 2: The S 1/2 of the NW 1/4 of the NE 1/4. Fractions: 1/2 × 1/4 × 1/4 = 1/32.

Acres = 1/32 × 640 = 20 acres .

Example 3 (square feet): A 40-acre tract equals 40 × 43,560 = 1,742,400 sq ft .

Speed tip: Read fractional descriptions from right to left — the rightmost fraction is the biggest piece, and each fraction to its left subdivides it further. Count commas: more “of the” phrases means a smaller parcel.

Lot-and-Block, Datum, and Air Lots

The lot-and-block (recorded plat) system describes a parcel by its lot number, block number, and the name and recording reference of the subdivision plat filed in the county register of deeds. It is the dominant method for modern residential subdivisions because the plat already fixes dimensions and easements, so the deed needs only a short reference such as "Lot 14, Block C, Oakwood Subdivision, recorded in Plat Book 32, Page 117."

Vertical interests require a datum — an established reference plane (the U.S. Geological Survey datum is mean sea level at New York Harbor) plus a benchmark , a permanent marker showing elevation. Condominium units and air rights are described as air lots , measured as elevations above and below the datum. This is how a developer can sell the right to build above an existing structure or how a subway tunnel below a parcel is described.

More Worked Survey Math and Pitfalls

Acreage practice: The NE 1/4 of the NW 1/4 of the SW 1/4 of a section. Multiply: 1/4 × 1/4 × 1/4 = 1/64. Acres = 640 ÷ 64 = 10 acres . Cost layer: at $3,500 per acre that tract is worth 10 × $3,500 = $35,000 .

Frontage and square footage: A rectangular lot is 80 ft of road frontage by 150 ft deep. Area = 80 × 150 = 12,000 sq ft , or 12,000 ÷ 43,560 = 0.2755 acre . At $18 per sq ft the land is worth 12,000 × $18 = $216,000 .

Pitfalls: (1) A metes-and-bounds description must close by returning to the point of beginning; if it does not, it is defective. (2) When a monument conflicts with a stated distance, the monument controls. (3) The order of priority for conflicting calls is generally natural monuments, then artificial monuments, then courses (directions), then distances, then area — area is the least reliable element and is given the lowest priority.

Choosing a System and Reading a Township Grid

The three systems are not interchangeable by region. Metes and bounds dominates the original 13 colonies and other areas surveyed before the federal grid; rectangular (government) survey covers most states admitted later (the Midwest and West); lot and block is layered on top of either system once land is subdivided and a plat is recorded. A single deed can combine methods — a metes-and-bounds tract later subdivided and re-described by lot and block.

Reading a section: Within a township, recall the snake numbering — Section 1 sits in the northeast corner, 6 in the northwest, and 36 in the southeast. A correction for the earth's curvature is built in through guide meridians and correction lines , which is why some sections are not a perfect 640 acres. On the exam, if a fractional description yields an odd acreage, suspect a fractional or government-lot section along a township's north or west tier.