Study guide
8.5 Attached Growth Systems: Trickling Filters, RBCs & Fixed-Film Processes
North Carolina Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: North Carolina Regulatory Framework, Certification & Classification
1.1 Dual Regulatory Structure: WTFOCB, WPCSOCC & NC DEQ 1.2 Drinking Water Certification Grades, Eligibility & the Apprentice Pathway 1.3 Examinations, Fees, Renewal, Continuing Education & Discipline 1.4 Classifying Drinking Water Facilities: Rating Values, Classes & Required Operators 1.5 Classifying Water Pollution Control Systems Under 15A NCAC 08G .0300 1.6 Wastewater Certification Types, Experience Ladders, OIT & Reciprocity
2 Chapter 2: Operator in Responsible Charge, Oversight & Regulatory Reporting
2.1 Designating the ORC and Back-up ORC: Forms, Deadlines & Legal Duties 2.2 Mandatory Visitation Frequencies & Facility Oversight 2.3 Operational Logs, Records Retention & Compliance Reporting 2.4 Sanitary Sewer Overflows: Reporting, Press Releases & Public Notice 2.5 The Federal Drinking Water Rule Framework Operators Are Tested On
3 Chapter 3: Drinking Water Treatment: Source Water Through Filtration
3.1 Source Water Quality, Raw Water Intake & Rapid Mixing 3.2 Coagulation Chemistry, Flocculation & Sedimentation Basins 3.3 Granular Media Filtration, Head Loss & Backwash Protocols 3.4 Taste and Odor Control, Powdered Activated Carbon & Algae Management
4 Chapter 4: Disinfection, Chemical Conditioning & Advanced Water Treatment
4.1 Chlorination Chemistry, Breakpoint Chlorination & CT Disinfection Inactivation 4.2 Disinfection Byproducts (TTHM & HAA5), Stage 1/2 DBPR & Enhanced Coagulation 4.3 Corrosion Control, Lead & Copper Rule Revisions, Fluoridation & Groundwater Treatment 4.4 Iron and Manganese Control: Oxidation, Greensand & Sequestration 4.5 Softening, Ion Exchange & Membrane Treatment 4.6 Water Plant Residuals, Backwash Recovery & Waste Disposal
5 Chapter 5: Groundwater Sources, Wells & Small Water Systems
5.1 Well Hydrology, Aquifers & North Carolina Well Construction Standards 5.2 Well Pumps, Wellhead Equipment & Source Protection 5.3 Small Water System Operations, Administration & Plant Recordkeeping
6 Chapter 6: Water Distribution Systems, Storage & Cross-Connection Control
6.1 Water Distribution Hydraulics, Storage Facilities & Water Quality Maintenance 6.2 Water Use, Demand Patterns & Distribution System Design 6.3 Pipe Materials, Main Installation, Service Connections & Meters 6.4 Fire Hydrants, Valve Operation & Distribution Operational Practices 6.5 Pump Hydraulics, Valve Operation & Cross-Connection Control / Backflow Prevention 6.6 System Mapping, Records & Information Management 6.7 Utility Security, Emergency Response & Boil Water Advisories
7 Chapter 7: Instrumentation, Electrical Fundamentals, Maintenance & Microbiological Monitoring
7.1 Instrumentation, Electrical Fundamentals & SCADA 7.2 Preventive Maintenance, Pumps, Motors & Mechanical Equipment 7.3 Bacteriology, Sample Siting Plans & RTCR Compliance Sampling
8 Chapter 8: Biological Wastewater Treatment & Secondary Processes
8.1 Wastewater Characterization, Preliminary Screening & Primary Clarification 8.2 Wastewater Lagoons, Stabilization Ponds & Operational Control 8.3 Constructed Wetlands & Natural Treatment Systems 8.4 Septic Tanks, Media Filters, Aerobic Treatment Units & Grease Interceptors 8.5 Attached Growth Systems: Trickling Filters, RBCs & Fixed-Film Processes 8.6 Activated Sludge Microbiology, Aeration Basins & Secondary Clarifiers 8.7 Operational Process Control: F/M Ratio, MCRT / Sludge Age & SVI
9 Chapter 9: Nutrient Removal, Solids Handling & Effluent Management
9.1 Biological Nutrient Removal (BNR) in NC Nutrient-Sensitive Waters (NSW) 9.2 Sludge Stabilization, Aerobic/Anaerobic Digestion & Biosolids Management 9.3 Digester Gas Systems, Heating, Mixing & Explosion Safety 9.4 Composting, Thermal Drying & Alternative Solids Disposal 9.5 Odor Sources, Measurement & Control Technologies 9.6 Tertiary Filtration, Reclaimed Water & Reuse Under 15A NCAC 02U 9.7 Effluent Disinfection, Dechlorination & NPDES Permit Compliance
10 Chapter 10: Wastewater Collection Systems, Lift Stations & Field Operations
10.1 Wastewater Collection System Design, Lift Stations & Inflow and Infiltration (I/I) 10.2 Manholes, Service Taps, Laterals & Sewer Construction Practice 10.3 Sewer Cleaning, Root Control & Preventive Maintenance Programs 10.4 Collection System Inspection & Acceptance Testing 10.5 Job-Site Pre-Planning, Traffic Control & Field Work Safety
11 Chapter 11: Industrial Pretreatment & Physical/Chemical Treatment
11.1 Industrial Pretreatment Programs & Protecting the POTW 11.2 Physical/Chemical Treatment Processes for Industrial Wastewater 11.3 Groundwater Remediation Systems, Flow Equalization & Flow Measurement
12 Chapter 12: Laboratory, Safety, Utility Management & Applied Mathematics
12.1 Laboratory Analytical Methods, Sampling Procedures & QA/QC 12.2 Chemical Safety, Gaseous Chlorine Handling & Hazard Communication 12.3 Permit-Required Confined Space Entry & Excavation / Trenching Safety 12.4 Electrical Safety, Lockout/Tagout & Machine Guarding 12.5 Biological Hazards, PPE, Heat Stress & Personal Hygiene 12.6 Applied Water & Wastewater Mathematics & Process Calculations 12.7 Process Control Mathematics: Loading, Efficiency, Removal & Solids 12.8 Hydraulics, Pressure & Unit Conversion Mathematics 12.9 Utility Management: Personnel, Budgeting, Public Relations & Plant Security
8.5 Attached Growth Systems: Trickling Filters, RBCs & Fixed-Film Processes
Key Takeaways Explain This Topic AI
Attached growth processes treat wastewater with biofilm fixed to media rather than suspended flocs, and 15A NCAC 08G .0102(26) defines submerged fixed growth to include rotating biological contactors and sequencing batch reactors.
Trickling filters are classified by hydraulic and organic loading as low-rate, intermediate, high-rate, or roughing filters, with recirculation used to maintain wetting, dilute strength, and control ponding and odor.
Filter flies (Psychoda) and ponding are the two classic trickling filter nuisances, both controlled by maintaining adequate hydraulic loading, flooding or chlorinating the media, and keeping distributor arms and orifices clear.
Rotating biological contactors rotate media discs through wastewater at roughly 1.5 revolutions per minute, alternately contacting wastewater and air; shaft bearings, drive motors, and media weight from excess biofilm are the common failure points.
Sloughing is normal and expected — the biofilm periodically releases and is captured in the secondary clarifier — so attached growth systems always require downstream clarification.
Last updated: September 2026
- 8.5 Attached Growth Systems: Trickling Filters, RBCs & Fixed-Film Processes
- 1. The fixed-film principle
In an attached growth process, the microorganisms live in a biofilm on fixed media while wastewater passes over them. Oxygen reaches the film from air (trickling filters, RBCs) or from aerated water (submerged systems). The film stratifies: the outer layer is aerobic and does the carbonaceous oxidation and nitrification; the inner layer near the media goes anaerobic as the film thickens; and when the anaerobic layer loses its grip, the film sloughs and washes downstream.
Because sloughing is normal, every attached growth process needs a secondary clarifier to capture the solids.
Regulatory note. 08G .0102(26) defines submerged fixed growth as a biological system in which wastewater is treated by contact with growth fixed to submerged support media and expressly includes rotating biological contactors and sequencing batch reactors . Under .0302(b)–(d), submerged fixed growth systems are graded by permitted flow exactly like activated sludge: Grade II at 0.5 MGD or less, Grade III above 0.5 through 2.5 MGD, and Grade IV above 2.5 MGD.
- 2. Trickling filters Influent + recirculation
- |
- [ ROTARY DISTRIBUTOR ]
- | | |
- ~~~~~~~~ v ~~ v ~~ v ~~~~~~~ media (rock or plastic)
- | biofilm-coated media | air moves by natural draft
- | |
- ============================= underdrain -> clarifier
- Classification Hydraulic loading Organic loading Characteristics
- Low rate (standard) Low Low Rock media, good nitrification, filter flies common
- Intermediate rate Moderate Moderate Recirculation usually required
- High rate High High Plastic media, heavy recirculation, less nitrification
- Roughing Very high Very high Pretreatment ahead of another process
Media. Rock media (3–5 inch) is heavy, limits depth to roughly 6–8 feet, and offers less surface area. Plastic or synthetic media allows towers 20–40 feet deep with far more surface area per volume and better airflow.
Recirculation returns filter effluent (or clarifier underflow) to the filter influent. It keeps media continuously wetted, dilutes strong influent, improves distribution, reduces odor, and helps flush ponding. The recirculation ratio is recirculated flow divided by influent flow, commonly 0.5:1 to 4:1.
Ventilation. Natural draft depends on the temperature difference between air and wastewater. On mild days airflow can stall, oxygen runs out, and the filter turns anaerobic and odorous — which is why underdrains, vent stacks, and the plenum must be kept clear and why some towers use forced ventilation.
Trickling filter troubleshooting
Problem Cause Response
Ponding Excess biofilm, fine media, high organic loading, debris Increase hydraulic loading or recirculation; rake or high-pressure wash the surface; flood and hold; chlorinate the media
Filter flies ( Psychoda ) Dry areas where larvae complete their life cycle Keep media continuously wetted; flood weekly; increase recirculation; targeted chlorination
Odor Anaerobic conditions, poor ventilation, septic influent Increase recirculation, clear underdrains and vents, address septicity upstream
Uneven distribution Plugged orifices or nozzles, unlevel distributor, bearing wear Clean orifices, level and re-set the distributor, service the bearing
Distributor stops turning Debris, bearing failure, insufficient flow Clear, service bearing, verify hydraulic load
- Ice formation Cold weather with high recirculation Reduce recirculation, windbreaks, cover where feasible
- 3. Rotating biological contactors
An RBC is a shaft of closely spaced plastic discs, roughly 40 percent submerged , rotating at about 1.5 revolutions per minute through a contour tank. Each rotation lifts the biofilm out for oxygen and returns it to the wastewater for substrate. Units are staged, with the first stage carrying the heaviest load and later stages nitrifying.
Operational and mechanical issues:
Excess biofilm weight — the classic RBC failure. Heavy growth overloads bearings and can bend or break shafts. Controlled stripping by rotation speed change, air stripping, or chemical addition is used to manage it.
Bearing and drive failures from continuous heavy load; monitor amperage, temperature, and vibration.
Uneven growth causes imbalance; white biofilm on the first stage indicates Beggiatoa thriving on sulfide from a septic influent.
Covers protect the media from sunlight (which degrades plastic and grows algae) and retain heat in winter.
Air-drive RBCs use diffused air in cups to rotate the shaft and can also strip excess growth.
4. Modern submerged and hybrid processes
Process Description
Moving bed biofilm reactor (MBBR) Free-floating plastic carriers kept in suspension by aeration or mixing; retained by screens; no sludge return needed
Integrated fixed-film activated sludge (IFAS) Carriers or fixed media placed inside an activated sludge basin, adding nitrifier inventory without more clarifier load
Submerged aerated filter / biological aerated filter Submerged media with air supplied below; filters and treats in one unit, backwashed periodically
Trickling filter/solids contact (TF/SC) Trickling filter followed by a short aerated contact basin to flocculate sloughed solids before clarification
Why operators like fixed film: stable against hydraulic and toxic shocks, low energy compared with mechanical aeration, no sludge return to balance, and simple day-to-day control. Why they watch it closely: limited process control levers — recirculation rate and loading are about all you have — and mechanical failures that stop treatment immediately.
5. Loading calculations
Hydraulic loading (gpd/ft²) = (influent + recirculated flow) ÷ filter surface area.
Organic loading (lb BOD/day per 1,000 ft³) = BOD applied ÷ media volume.
Recirculation ratio = recirculated flow ÷ influent flow.
RBC loading (lb BOD/day per 1,000 ft²) uses total media surface area — first-stage loading is the number that governs whether the leading shaft will overload.
Note
Winter nitrification. Fixed-film nitrification is temperature sensitive. As wastewater cools, nitrifier activity drops sharply, and a trickling filter or RBC that nitrifies well in August may not in January. Plants with year-round ammonia limits plan for that seasonal loss rather than being surprised by it.