Study guide
8.7 Operational Process Control: F/M Ratio, MCRT / Sludge Age & SVI
North Carolina Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: North Carolina Regulatory Framework, Certification & Classification
1.1 Dual Regulatory Structure: WTFOCB, WPCSOCC & NC DEQ 1.2 Drinking Water Certification Grades, Eligibility & the Apprentice Pathway 1.3 Examinations, Fees, Renewal, Continuing Education & Discipline 1.4 Classifying Drinking Water Facilities: Rating Values, Classes & Required Operators 1.5 Classifying Water Pollution Control Systems Under 15A NCAC 08G .0300 1.6 Wastewater Certification Types, Experience Ladders, OIT & Reciprocity
2 Chapter 2: Operator in Responsible Charge, Oversight & Regulatory Reporting
2.1 Designating the ORC and Back-up ORC: Forms, Deadlines & Legal Duties 2.2 Mandatory Visitation Frequencies & Facility Oversight 2.3 Operational Logs, Records Retention & Compliance Reporting 2.4 Sanitary Sewer Overflows: Reporting, Press Releases & Public Notice 2.5 The Federal Drinking Water Rule Framework Operators Are Tested On
3 Chapter 3: Drinking Water Treatment: Source Water Through Filtration
3.1 Source Water Quality, Raw Water Intake & Rapid Mixing 3.2 Coagulation Chemistry, Flocculation & Sedimentation Basins 3.3 Granular Media Filtration, Head Loss & Backwash Protocols 3.4 Taste and Odor Control, Powdered Activated Carbon & Algae Management
4 Chapter 4: Disinfection, Chemical Conditioning & Advanced Water Treatment
4.1 Chlorination Chemistry, Breakpoint Chlorination & CT Disinfection Inactivation 4.2 Disinfection Byproducts (TTHM & HAA5), Stage 1/2 DBPR & Enhanced Coagulation 4.3 Corrosion Control, Lead & Copper Rule Revisions, Fluoridation & Groundwater Treatment 4.4 Iron and Manganese Control: Oxidation, Greensand & Sequestration 4.5 Softening, Ion Exchange & Membrane Treatment 4.6 Water Plant Residuals, Backwash Recovery & Waste Disposal
5 Chapter 5: Groundwater Sources, Wells & Small Water Systems
5.1 Well Hydrology, Aquifers & North Carolina Well Construction Standards 5.2 Well Pumps, Wellhead Equipment & Source Protection 5.3 Small Water System Operations, Administration & Plant Recordkeeping
6 Chapter 6: Water Distribution Systems, Storage & Cross-Connection Control
6.1 Water Distribution Hydraulics, Storage Facilities & Water Quality Maintenance 6.2 Water Use, Demand Patterns & Distribution System Design 6.3 Pipe Materials, Main Installation, Service Connections & Meters 6.4 Fire Hydrants, Valve Operation & Distribution Operational Practices 6.5 Pump Hydraulics, Valve Operation & Cross-Connection Control / Backflow Prevention 6.6 System Mapping, Records & Information Management 6.7 Utility Security, Emergency Response & Boil Water Advisories
7 Chapter 7: Instrumentation, Electrical Fundamentals, Maintenance & Microbiological Monitoring
7.1 Instrumentation, Electrical Fundamentals & SCADA 7.2 Preventive Maintenance, Pumps, Motors & Mechanical Equipment 7.3 Bacteriology, Sample Siting Plans & RTCR Compliance Sampling
8 Chapter 8: Biological Wastewater Treatment & Secondary Processes
8.1 Wastewater Characterization, Preliminary Screening & Primary Clarification 8.2 Wastewater Lagoons, Stabilization Ponds & Operational Control 8.3 Constructed Wetlands & Natural Treatment Systems 8.4 Septic Tanks, Media Filters, Aerobic Treatment Units & Grease Interceptors 8.5 Attached Growth Systems: Trickling Filters, RBCs & Fixed-Film Processes 8.6 Activated Sludge Microbiology, Aeration Basins & Secondary Clarifiers 8.7 Operational Process Control: F/M Ratio, MCRT / Sludge Age & SVI
9 Chapter 9: Nutrient Removal, Solids Handling & Effluent Management
9.1 Biological Nutrient Removal (BNR) in NC Nutrient-Sensitive Waters (NSW) 9.2 Sludge Stabilization, Aerobic/Anaerobic Digestion & Biosolids Management 9.3 Digester Gas Systems, Heating, Mixing & Explosion Safety 9.4 Composting, Thermal Drying & Alternative Solids Disposal 9.5 Odor Sources, Measurement & Control Technologies 9.6 Tertiary Filtration, Reclaimed Water & Reuse Under 15A NCAC 02U 9.7 Effluent Disinfection, Dechlorination & NPDES Permit Compliance
10 Chapter 10: Wastewater Collection Systems, Lift Stations & Field Operations
10.1 Wastewater Collection System Design, Lift Stations & Inflow and Infiltration (I/I) 10.2 Manholes, Service Taps, Laterals & Sewer Construction Practice 10.3 Sewer Cleaning, Root Control & Preventive Maintenance Programs 10.4 Collection System Inspection & Acceptance Testing 10.5 Job-Site Pre-Planning, Traffic Control & Field Work Safety
11 Chapter 11: Industrial Pretreatment & Physical/Chemical Treatment
11.1 Industrial Pretreatment Programs & Protecting the POTW 11.2 Physical/Chemical Treatment Processes for Industrial Wastewater 11.3 Groundwater Remediation Systems, Flow Equalization & Flow Measurement
12 Chapter 12: Laboratory, Safety, Utility Management & Applied Mathematics
12.1 Laboratory Analytical Methods, Sampling Procedures & QA/QC 12.2 Chemical Safety, Gaseous Chlorine Handling & Hazard Communication 12.3 Permit-Required Confined Space Entry & Excavation / Trenching Safety 12.4 Electrical Safety, Lockout/Tagout & Machine Guarding 12.5 Biological Hazards, PPE, Heat Stress & Personal Hygiene 12.6 Applied Water & Wastewater Mathematics & Process Calculations 12.7 Process Control Mathematics: Loading, Efficiency, Removal & Solids 12.8 Hydraulics, Pressure & Unit Conversion Mathematics 12.9 Utility Management: Personnel, Budgeting, Public Relations & Plant Security
8.7 Operational Process Control: F/M Ratio, MCRT / Sludge Age & SVI
Key Takeaways Explain This Topic AI
The Food-to-Microorganism (F/M) ratio measures daily applied BOD5 per unit mass of aeration MLVSS, which operators directly regulate by adjusting the daily Waste Activated Sludge (WAS) mass withdrawal rate.
Mean Cell Residence Time (MCRT) quantifies the average days biomass remains in the system: MCRT = (Total lbs MLSS in System) / (lbs/day WAS solids + lbs/day Effluent solids), unlike Gould Sludge Age which ignores clarifier inventory and wasting.
Sludge Volume Index (SVI) evaluates mixed liquor settling and compaction after 30 minutes: SVI = (Settled Sludge Volume in mL/L × 1,000) / (MLSS in mg/L), with 80 to 150 mL/g representing optimal clarification.
Extreme SVI values indicate operational disorders: SVI < 80 mL/g signifies old, dense sludge prone to pinpoint floc turbidity, while SVI > 150 mL/g signals filamentous bulking or severe settleability failure.
Seasonal temperature adjustments require lowering target F/M and raising MCRT in cold winter months to prevent autotrophic nitrifier washout, while reversing these targets during warm summer conditions.
Last updated: September 2026
- 8.7 Operational Process Control: F/M Ratio, MCRT / Sludge Age & SVI
- 1. Food-to-Microorganism (F/M) Ratio
The Food-to-Microorganism (F/M) ratio is one of the foundational process control parameters used by North Carolina biological wastewater operators to evaluate and regulate the organic loading rate applied to an activated sludge system. It mathematically balances the daily mass of incoming biodegradable organic matter (food) against the active biological biomass (microorganisms) maintained in the aeration basin.
The Mathematical Formula F/M = Pounds of B O D 5 applied per day Pounds of MLVSS in aeration basin \text{F/M} = \frac{\text{Pounds of } BOD_5 \text{ applied per day}}{\text{Pounds of MLVSS in aeration basin}} F/M = Pounds of MLVSS in aeration basin Pounds of BO D 5 applied per day
Where: Pounds of B O D 5 applied/day = Flow (MGD) × B O D 5 (mg/L) × 8.34 lbs/gal \text{Pounds of } BOD_5 \text{ applied/day} = \text{Flow (MGD)} \times BOD_5 \text{ (mg/L)} \times 8.34 \text{ lbs/gal} Pounds of BO D 5 applied/day = Flow (MGD) × BO D 5 (mg/L) × 8.34 lbs/gal Pounds of MLVSS in aeration = Aeration Basin Volume (MG) × M L V S S (mg/L) × 8.34 lbs/gal \text{Pounds of MLVSS in aeration} = \text{Aeration Basin Volume (MG)} \times MLVSS \text{ (mg/L)} \times 8.34 \text{ lbs/gal} Pounds of MLVSS in aeration = Aeration Basin Volume (MG) × M L V SS (mg/L) × 8.34 lbs/gal
Notice that the conversion factor 8.34 lbs/gal 8.34 \text{ lbs/gal} 8.34 lbs/gal appears in both the numerator and denominator and cancels out algebraically when both volumes are expressed in Million Gallons (MG) and Million Gallons per Day (MGD): F/M = Q (MGD) × B O D 5 (mg/L) V a e r (MG) × M L V S S (mg/L) \text{F/M} = \frac{Q \text{ (MGD)} \times BOD_5 \text{ (mg/L)}}{V_{aer} \text{ (MG)} \times MLVSS \text{ (mg/L)}} F/M = V a er (MG) × M L V SS (mg/L) Q (MGD) × BO D 5 (mg/L)
Units of F/M: The resulting value is expressed as pounds of B O D 5 BOD_5 BO D 5 per pound of MLVSS per day (lbs B O D 5 BOD_5 BO D 5 / lb MLVSS · day), or simply as day⁻¹.
Typical Design and Operating Ranges
Activated Sludge Variation Typical F/M Range (lb BOD5/lb MLVSS·day) Hydraulic Retention Time (HRT) Characteristics
Conventional Activated Sludge 0.20 to 0.50 4 to 8 hours Standard municipal target; balances rapid organic removal with robust flocculation.
Extended Aeration / Oxidation Ditch 0.05 to 0.15 18 to 36 hours Low organic loading; high endogenous decay; produces low net sludge yield.
High-Rate Activated Sludge 0.50 to 1.50 1.5 to 3 hours High organic throughput; young biomass; high sludge production; requires downstream polishing.
Operational Adjustments of the F/M Ratio
Operators cannot directly control the incoming plant flow rate ( Q Q Q ) or influent organic strength ( B O D 5 BOD_5 BO D 5 ). Therefore, the operator controls the F/M ratio entirely by manipulating the denominator: the mass of MLVSS in the aeration basin , which is adjusted via the Waste Activated Sludge (WAS) pumping rate:
To INCREASE the F/M Ratio: Increase the WAS pumping rate. Wasting more sludge removes biomass from the system, reducing aeration tank MLVSS. Because the denominator decreases, F/M increases.
To DECREASE the F/M Ratio: Decrease or throttle back the WAS pumping rate. Allowing less sludge to be wasted permits the biological population to reproduce and accumulate, raising aeration tank MLVSS. Because the denominator increases, F/M decreases.
Seasonal Temperature Compensation
Microbial metabolic reaction rates depend heavily on wastewater temperature (Arrhenius relationship).
Winter Operation (Cold Water, < 12°C–15°C): Bacterial enzymes operate at sluggish metabolic rates. To achieve the same total mass removal of B O D 5 BOD_5 BO D 5 and sustain nitrification, the operator must maintain a larger population of workers. Therefore, operators decrease the target F/M ratio (by reducing wasting and raising MLVSS concentrations).
Summer Operation (Warm Water, > 20°C–25°C): Microorganisms are metabolically aggressive and consume food rapidly. Maintaining excessive biomass in warm water results in excessive oxygen demand and high endogenous respiration, leading to pin floc. Therefore, operators increase the target F/M ratio (by increasing wasting and lowering MLVSS concentrations).
2. Mean Cell Residence Time (MCRT) & Sludge Age
Mean Cell Residence Time (MCRT), also termed Sludge Retention Time (SRT) or Solids Retention Time, represents the average length of time (in days) that a biological microorganism remains inside the activated sludge treatment system before being removed via wasting or lost in the final effluent. Total Inventory of Solids
- [ Aeration Basins + Clarifiers (lbs MLSS) ]
- MCRT (days) = ─────────────────────────────────────────────────────────────
- Daily Loss of Solids
- [ WAS Wasting (lbs/day TSS) + Final Effluent Loss (lbs/day TSS) ]
The Mathematical MCRT Formula MCRT (days) = Total Pounds of MLSS in System Pounds/Day of TSS Wasted via WAS + Pounds/Day of TSS Lost in Effluent \text{MCRT (days)} = \frac{\text{Total Pounds of MLSS in System}}{\text{Pounds/Day of TSS Wasted via WAS} + \text{Pounds/Day of TSS Lost in Effluent}} MCRT (days) = Pounds/Day of TSS Wasted via WAS + Pounds/Day of TSS Lost in Effluent Total Pounds of MLSS in System
Where: Total System Pounds = [ V a e r (MG) × M L S S (mg/L) × 8.34 ] + [ V c l a r (MG) × T S S c l a r (mg/L) × 8.34 ] \text{Total System Pounds} = [V_{aer} \text{ (MG)} \times MLSS \text{ (mg/L)} \times 8.34] + [V_{clar} \text{ (MG)} \times TSS_{clar} \text{ (mg/L)} \times 8.34] Total System Pounds = [ V a er (MG) × M L SS (mg/L) × 8.34 ] + [ V c l a r (MG) × TS S c l a r (mg/L) × 8.34 ] WAS Pounds/Day = Q W A S (MGD) × W A S T S S (mg/L) × 8.34 \text{WAS Pounds/Day} = Q_{WAS} \text{ (MGD)} \times WAS_{TSS} \text{ (mg/L)} \times 8.34 WAS Pounds/Day = Q W A S (MGD) × W A S TSS (mg/L) × 8.34 Effluent Pounds/Day = Q e f f (MGD) × E f f l u e n t T S S (mg/L) × 8.34 \text{Effluent Pounds/Day} = Q_{eff} \text{ (MGD)} \times Effluent_{TSS} \text{ (mg/L)} \times 8.34 Effluent Pounds/Day = Q e ff (MGD) × E ff l u e n t TSS (mg/L) × 8.34
Practical Operator Rule of Thumb: In many routine North Carolina certification exam questions, clarifier solids inventory is either ignored or estimated as a fixed percentage of aeration tank solids (e.g., 10% to 20%) if clarifier core sample data is omitted.
- Operational MCRT Ranges
- Conventional Activated Sludge: 5 to 15 days
- Extended Aeration Systems: 20 to 30+ days
Nitrification Systems: 10 to 20+ days (Nitrifiers, Nitrosomonas and Nitrobacter , are slow-growing autotrophic bacteria with long generation times. If the system MCRT drops below the critical washout age—often 8 to 10 days in cold water—nitrifiers are washed out of the plant faster than they can reproduce, resulting in permit violations for ammonia).
MCRT vs. Gould Sludge Age
Operators must distinguish between MCRT and the simpler Gould Sludge Age : Gould Sludge Age (days) = Pounds of MLSS in Aeration Basin Pounds of Influent TSS Entering Aerator per Day \text{Gould Sludge Age (days)} = \frac{\text{Pounds of MLSS in Aeration Basin}}{\text{Pounds of Influent TSS Entering Aerator per Day}} Gould Sludge Age (days) = Pounds of Influent TSS Entering Aerator per Day Pounds of MLSS in Aeration Basin
While Gould Sludge Age is easy to calculate, it only considers incoming suspended solids rather than biological wasting, and completely ignores the secondary clarifier inventory. MCRT reflects the true mass balance of biological growth and wasting, making it the superior regulatory and operational standard in North Carolina.
3. Sludge Volume Index (SVI) & Settleability Testing
The Sludge Volume Index (SVI), developed by Mohlman in 1934, is the standard metric used to quantify the physical settling and compaction characteristics of mixed liquor suspended solids.
Standard Settleability Test Procedure
Collect a fresh grab sample of mixed liquor at the discharge end of the aeration basin.
Immediately pour the thoroughly mixed sample into a 1,000 mL graduated cylinder or a 2-liter Mallory settlometer .
Allow the sample to settle undisturbed for exactly 30 minutes .
Record the volume occupied by the settled sludge blanket at 30 minutes in milliliters per liter ( S S V 30 SSV_{30} SS V 30 , mL/L). 1000 mL ┌────────┐ 1000 mL ┌────────┐
- │░░░░░░░░│ │ │ ◄── Clear Supernatant
- │░░░░░░░░│ │ │
- │░░░░░░░░│ ──► After 30 Min ──► ├────────┤ ◄── Settled Sludge Volume
- │░░░░░░░░│ │▓▓▓▓▓▓▓▓│ (SSV30 = e.g., 250 mL/L)
- │░░░░░░░░│ │▓▓▓▓▓▓▓▓│
- 0 mL └────────┘ 0 mL └────────┘
- At 0 Minutes At 30 Minutes
SVI Formula SVI (mL/g) = Settled Sludge Volume at 30 min (mL/L) × 1 , 000 MLSS Concentration (mg/L) \text{SVI (mL/g)} = \frac{\text{Settled Sludge Volume at 30 min (mL/L)} \times 1,000}{\text{MLSS Concentration (mg/L)}} SVI (mL/g) = MLSS Concentration (mg/L) Settled Sludge Volume at 30 min (mL/L) × 1 , 000
Dimensional Analysis: The multiplier of 1,000 converts milligrams of MLSS to grams. SVI defines the volume in milliliters occupied by one gram of mixed liquor suspended solids after 30 minutes of quiescent settling.
- Diagnostic Interpretation of SVI Values SVI < 80 mL/g SVI 80 - 150 mL/g SVI > 150 mL/g
- ┌──────────────────────┐ ┌──────────────────────┐ ┌──────────────────────┐
- │ Dense / Old Sludge │ │ Ideal Sludge │ │ Bulking / Filament │
- │ - Rapid settling │ │ - Uniform blanket │ │ - Slow settling │
- │ - Granular flocs │ │ - Sharp interface │ │ - Fluffy, light floc │
- │ - Pin floc turbidity │ │ - Clear supernatant │ │ - High blanket risk │
- └──────────────────────┘ └──────────────────────┘ └──────────────────────┘
SVI < 80 mL/g (Old, Dense, Fast-Settling Sludge):
Sludge particles settle rapidly, almost like sand. Flocs are dense and granular.
Problem: Because the flocs settle so quickly, they do not sweep through the water column to capture fine colloids. Small sheared floc particles are left behind in suspension, causing pinpoint floc and elevated effluent turbidity.
Cause: High sludge age (high MCRT), low F/M ratio, over-aeration.
Action: Increase WAS pumping to rejuvenate the biomass.
SVI 80 to 150 mL/g (Optimal Settling & Clarification):
The sludge settles with a clear, well-defined blanket interface.
Flocs aggregate into a porous network that slowly compacts, filtering out fine particles and leaving a sparkling clear supernatant.
Represents ideal operating conditions for municipal activated sludge plants.
SVI > 150 to 200 mL/g (Slow-Settling, Bulking Sludge):
The sludge blanket settles sluggishly, often occupying 600 to 900 mL after 30 minutes.
Problem: Clarifier thickening capacity is compromised; secondary clarifiers cannot concentrate the sludge, causing the blanket to rise until solids wash out over the effluent weirs.
Cause: Filamentous organism proliferation, low DO, nutrient deficiency, septic wastewater, or under-aerated zoogloeal slime.
Action: Check DO; inspect wet mount under microscope; dose chlorine to RAS if filaments dominate.
4. Step-by-Step Worked Process Control Calculations
North Carolina Water Pollution Control System Operators Certification Commission (WPCSOCC) biological exams (Grades II, III, and IV) require mastery of activated sludge mass-balance math. The following step-by-step worked examples illustrate standard exam problems.
Calculation 1: Determining Daily F/M Ratio
Problem: A biological wastewater facility treats an average daily flow of 2.5 MGD of primary effluent with a B O D 5 BOD_5 BO D 5 concentration of 180 mg/L . The aeration basin has a volume of 1.0 Million Gallons . Laboratory analysis shows an aeration tank MLSS of 2,500 mg/L with a volatile solids content of 75% . Calculate the operational F/M ratio.
Step 1: Calculate the volatile solids concentration (MLVSS) MLVSS (mg/L) = MLSS (mg/L) × Volatile Fraction \text{MLVSS (mg/L)} = \text{MLSS (mg/L)} \times \text{Volatile Fraction} MLVSS (mg/L) = MLSS (mg/L) × Volatile Fraction MLVSS = 2 , 500 mg/L × 0.75 = 1 , 875 mg/L \text{MLVSS} = 2,500 \text{ mg/L} \times 0.75 = 1,875 \text{ mg/L} MLVSS = 2 , 500 mg/L × 0.75 = 1 , 875 mg/L
Step 2: Calculate daily pounds of B O D 5 BOD_5 BO D 5 applied (Food) Pounds B O D 5 / day = Flow (MGD) × B O D 5 (mg/L) × 8.34 lbs/gal \text{Pounds } BOD_5/\text{day} = \text{Flow (MGD)} \times BOD_5 \text{ (mg/L)} \times 8.34 \text{ lbs/gal} Pounds BO D 5 / day = Flow (MGD) × BO D 5 (mg/L) × 8.34 lbs/gal Pounds B O D 5 / day = 2.5 MGD × 180 mg/L × 8.34 = 3 , 753 lbs/day \text{Pounds } BOD_5/\text{day} = 2.5 \text{ MGD} \times 180 \text{ mg/L} \times 8.34 = 3,753 \text{ lbs/day} Pounds BO D 5 / day = 2.5 MGD × 180 mg/L × 8.34 = 3 , 753 lbs/day
Step 3: Calculate total pounds of MLVSS in the aeration basin (Microorganisms) Pounds MLVSS = Volume (MG) × MLVSS (mg/L) × 8.34 lbs/gal \text{Pounds MLVSS} = \text{Volume (MG)} \times \text{MLVSS (mg/L)} \times 8.34 \text{ lbs/gal} Pounds MLVSS = Volume (MG) × MLVSS (mg/L) × 8.34 lbs/gal Pounds MLVSS = 1.0 MG × 1 , 875 mg/L × 8.34 = 15 , 637.5 lbs \text{Pounds MLVSS} = 1.0 \text{ MG} \times 1,875 \text{ mg/L} \times 8.34 = 15,637.5 \text{ lbs} Pounds MLVSS = 1.0 MG × 1 , 875 mg/L × 8.34 = 15 , 637.5 lbs
Step 4: Calculate the F/M ratio F/M = 3 , 753 lbs B O D 5 / day 15 , 637.5 lbs MLVSS = 0.24 lb B O D 5 / lb MLVSS ⋅ day \text{F/M} = \frac{3,753 \text{ lbs } BOD_5/\text{day}}{15,637.5 \text{ lbs MLVSS}} = 0.24 \text{ lb } BOD_5/\text{lb MLVSS} \cdot \text{day} F/M = 15 , 637.5 lbs MLVSS 3 , 753 lbs BO D 5 / day = 0.24 lb BO D 5 / lb MLVSS ⋅ day
Conclusion: The F/M of 0.24 falls well within the conventional design range of 0.20 to 0.50.
Calculation 2: Determining Sludge Volume Index (SVI)
Problem: A mixed liquor sample is drawn from an aeration basin. After 30 minutes in a 1,000 mL graduated cylinder, the settled sludge blanket occupies 240 mL . The laboratory reports that the basin MLSS concentration is 2,400 mg/L . Calculate the SVI and diagnose the sludge settling condition.
Calculation: SVI (mL/g) = S S V 30 (mL/L) × 1 , 000 MLSS (mg/L) \text{SVI (mL/g)} = \frac{SSV_{30} \text{ (mL/L)} \times 1,000}{\text{MLSS (mg/L)}} SVI (mL/g) = MLSS (mg/L) SS V 30 (mL/L) × 1 , 000 SVI = 240 × 1 , 000 2 , 400 = 240 , 000 2 , 400 = 100 mL/g \text{SVI} = \frac{240 \times 1,000}{2,400} = \frac{240,000}{2,400} = 100 \text{ mL/g} SVI = 2 , 400 240 × 1 , 000 = 2 , 400 240 , 000 = 100 mL/g
Diagnosis: An SVI of 100 mL/g is in the optimal range (80 to 150 mL/g), indicating excellent settleability, good compaction, and low effluent turbidity.
Calculation 3: Calculating Daily WAS Pumping Rate to Maintain Target MCRT
Problem: An activated sludge facility needs to maintain a target MCRT of 8.5 days . The plant parameters are as follows:
- Aeration Basin Volume = 1.50 MG
- Secondary Clarifier Volume = 0.50 MG
- Aeration Basin MLSS = 3,000 mg/L
- Secondary Clarifier Average TSS = 1,500 mg/L
- Plant Effluent Flow = 4.0 MGD
- Plant Effluent TSS = 12 mg/L
- Waste Activated Sludge (WAS) Concentration = 8,000 mg/L
Calculate the required daily Waste Activated Sludge (WAS) pumping rate in Gallons per Day (GPD) .
Step 1: Calculate total pounds of MLSS in the entire system Pounds in Aeration Basin = 1.50 MG × 3 , 000 mg/L × 8.34 = 37 , 530 lbs \text{Pounds in Aeration Basin} = 1.50 \text{ MG} \times 3,000 \text{ mg/L} \times 8.34 = 37,530 \text{ lbs} Pounds in Aeration Basin = 1.50 MG × 3 , 000 mg/L × 8.34 = 37 , 530 lbs Pounds in Clarifier = 0.50 MG × 1 , 500 mg/L × 8.34 = 6 , 255 lbs \text{Pounds in Clarifier} = 0.50 \text{ MG} \times 1,500 \text{ mg/L} \times 8.34 = 6,255 \text{ lbs} Pounds in Clarifier = 0.50 MG × 1 , 500 mg/L × 8.34 = 6 , 255 lbs Total System Pounds = 37 , 530 + 6 , 255 = 43 , 785 lbs \text{Total System Pounds} = 37,530 + 6,255 = 43,785 \text{ lbs} Total System Pounds = 37 , 530 + 6 , 255 = 43 , 785 lbs
Step 2: Determine target total pounds of solids that must leave the system each day Target Daily Solids Loss (lbs/day) = Total System Pounds Target MCRT (days) = 43 , 785 lbs 8.5 days = 5 , 151.18 lbs/day \text{Target Daily Solids Loss (lbs/day)} = \frac{\text{Total System Pounds}}{\text{Target MCRT (days)}} = \frac{43,785 \text{ lbs}}{8.5 \text{ days}} = 5,151.18 \text{ lbs/day} Target Daily Solids Loss (lbs/day) = Target MCRT (days) Total System Pounds = 8.5 days 43 , 785 lbs = 5 , 151.18 lbs/day
Step 3: Calculate pounds of solids lost per day in final effluent Effluent Loss (lbs/day) = Flow (MGD) × Effluent TSS (mg/L) × 8.34 \text{Effluent Loss (lbs/day)} = \text{Flow (MGD)} \times \text{Effluent TSS (mg/L)} \times 8.34 Effluent Loss (lbs/day) = Flow (MGD) × Effluent TSS (mg/L) × 8.34 Effluent Loss = 4.0 MGD × 12 mg/L × 8.34 = 400.32 lbs/day \text{Effluent Loss} = 4.0 \text{ MGD} \times 12 \text{ mg/L} \times 8.34 = 400.32 \text{ lbs/day} Effluent Loss = 4.0 MGD × 12 mg/L × 8.34 = 400.32 lbs/day
Step 4: Calculate pounds of solids that must be removed via WAS WAS lbs/day = Target Daily Solids Loss − Effluent Loss \text{WAS lbs/day} = \text{Target Daily Solids Loss} - \text{Effluent Loss} WAS lbs/day = Target Daily Solids Loss − Effluent Loss WAS lbs/day = 5 , 151.18 lbs/day − 400.32 lbs/day = 4 , 750.86 lbs/day \text{WAS lbs/day} = 5,151.18 \text{ lbs/day} - 400.32 \text{ lbs/day} = 4,750.86 \text{ lbs/day} WAS lbs/day = 5 , 151.18 lbs/day − 400.32 lbs/day = 4 , 750.86 lbs/day
Step 5: Convert required WAS pounds into WAS flow in Gallons per Day (GPD) WAS Flow (MGD) = WAS lbs/day WAS TSS (mg/L) × 8.34 lbs/gal \text{WAS Flow (MGD)} = \frac{\text{WAS lbs/day}}{\text{WAS TSS (mg/L)} \times 8.34 \text{ lbs/gal}} WAS Flow (MGD) = WAS TSS (mg/L) × 8.34 lbs/gal WAS lbs/day WAS Flow (MGD) = 4 , 750.86 8 , 000 × 8.34 = 4 , 750.86 66 , 720 = 0.071206 MGD \text{WAS Flow (MGD)} = \frac{4,750.86}{8,000 \times 8.34} = \frac{4,750.86}{66,720} = 0.071206 \text{ MGD} WAS Flow (MGD) = 8 , 000 × 8.34 4 , 750.86 = 66 , 720 4 , 750.86 = 0.071206 MGD WAS Flow (GPD) = 0.071206 MGD × 1 , 000 , 000 gal/MG = 71 , 206 GPD \text{WAS Flow (GPD)} = 0.071206 \text{ MGD} \times 1,000,000 \text{ gal/MG} = 71,206 \text{ GPD} WAS Flow (GPD) = 0.071206 MGD × 1 , 000 , 000 gal/MG = 71 , 206 GPD
Operational Answer: The operator must set the WAS pumping rate to approximately 71,200 gallons per day to maintain the target MCRT of 8.5 days.