Study guide
11.2 Physical/Chemical Treatment Processes for Industrial Wastewater
North Carolina Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: North Carolina Regulatory Framework, Certification & Classification
1.1 Dual Regulatory Structure: WTFOCB, WPCSOCC & NC DEQ 1.2 Drinking Water Certification Grades, Eligibility & the Apprentice Pathway 1.3 Examinations, Fees, Renewal, Continuing Education & Discipline 1.4 Classifying Drinking Water Facilities: Rating Values, Classes & Required Operators 1.5 Classifying Water Pollution Control Systems Under 15A NCAC 08G .0300 1.6 Wastewater Certification Types, Experience Ladders, OIT & Reciprocity
2 Chapter 2: Operator in Responsible Charge, Oversight & Regulatory Reporting
2.1 Designating the ORC and Back-up ORC: Forms, Deadlines & Legal Duties 2.2 Mandatory Visitation Frequencies & Facility Oversight 2.3 Operational Logs, Records Retention & Compliance Reporting 2.4 Sanitary Sewer Overflows: Reporting, Press Releases & Public Notice 2.5 The Federal Drinking Water Rule Framework Operators Are Tested On
3 Chapter 3: Drinking Water Treatment: Source Water Through Filtration
3.1 Source Water Quality, Raw Water Intake & Rapid Mixing 3.2 Coagulation Chemistry, Flocculation & Sedimentation Basins 3.3 Granular Media Filtration, Head Loss & Backwash Protocols 3.4 Taste and Odor Control, Powdered Activated Carbon & Algae Management
4 Chapter 4: Disinfection, Chemical Conditioning & Advanced Water Treatment
4.1 Chlorination Chemistry, Breakpoint Chlorination & CT Disinfection Inactivation 4.2 Disinfection Byproducts (TTHM & HAA5), Stage 1/2 DBPR & Enhanced Coagulation 4.3 Corrosion Control, Lead & Copper Rule Revisions, Fluoridation & Groundwater Treatment 4.4 Iron and Manganese Control: Oxidation, Greensand & Sequestration 4.5 Softening, Ion Exchange & Membrane Treatment 4.6 Water Plant Residuals, Backwash Recovery & Waste Disposal
5 Chapter 5: Groundwater Sources, Wells & Small Water Systems
5.1 Well Hydrology, Aquifers & North Carolina Well Construction Standards 5.2 Well Pumps, Wellhead Equipment & Source Protection 5.3 Small Water System Operations, Administration & Plant Recordkeeping
6 Chapter 6: Water Distribution Systems, Storage & Cross-Connection Control
6.1 Water Distribution Hydraulics, Storage Facilities & Water Quality Maintenance 6.2 Water Use, Demand Patterns & Distribution System Design 6.3 Pipe Materials, Main Installation, Service Connections & Meters 6.4 Fire Hydrants, Valve Operation & Distribution Operational Practices 6.5 Pump Hydraulics, Valve Operation & Cross-Connection Control / Backflow Prevention 6.6 System Mapping, Records & Information Management 6.7 Utility Security, Emergency Response & Boil Water Advisories
7 Chapter 7: Instrumentation, Electrical Fundamentals, Maintenance & Microbiological Monitoring
7.1 Instrumentation, Electrical Fundamentals & SCADA 7.2 Preventive Maintenance, Pumps, Motors & Mechanical Equipment 7.3 Bacteriology, Sample Siting Plans & RTCR Compliance Sampling
8 Chapter 8: Biological Wastewater Treatment & Secondary Processes
8.1 Wastewater Characterization, Preliminary Screening & Primary Clarification 8.2 Wastewater Lagoons, Stabilization Ponds & Operational Control 8.3 Constructed Wetlands & Natural Treatment Systems 8.4 Septic Tanks, Media Filters, Aerobic Treatment Units & Grease Interceptors 8.5 Attached Growth Systems: Trickling Filters, RBCs & Fixed-Film Processes 8.6 Activated Sludge Microbiology, Aeration Basins & Secondary Clarifiers 8.7 Operational Process Control: F/M Ratio, MCRT / Sludge Age & SVI
9 Chapter 9: Nutrient Removal, Solids Handling & Effluent Management
9.1 Biological Nutrient Removal (BNR) in NC Nutrient-Sensitive Waters (NSW) 9.2 Sludge Stabilization, Aerobic/Anaerobic Digestion & Biosolids Management 9.3 Digester Gas Systems, Heating, Mixing & Explosion Safety 9.4 Composting, Thermal Drying & Alternative Solids Disposal 9.5 Odor Sources, Measurement & Control Technologies 9.6 Tertiary Filtration, Reclaimed Water & Reuse Under 15A NCAC 02U 9.7 Effluent Disinfection, Dechlorination & NPDES Permit Compliance
10 Chapter 10: Wastewater Collection Systems, Lift Stations & Field Operations
10.1 Wastewater Collection System Design, Lift Stations & Inflow and Infiltration (I/I) 10.2 Manholes, Service Taps, Laterals & Sewer Construction Practice 10.3 Sewer Cleaning, Root Control & Preventive Maintenance Programs 10.4 Collection System Inspection & Acceptance Testing 10.5 Job-Site Pre-Planning, Traffic Control & Field Work Safety
11 Chapter 11: Industrial Pretreatment & Physical/Chemical Treatment
11.1 Industrial Pretreatment Programs & Protecting the POTW 11.2 Physical/Chemical Treatment Processes for Industrial Wastewater 11.3 Groundwater Remediation Systems, Flow Equalization & Flow Measurement
12 Chapter 12: Laboratory, Safety, Utility Management & Applied Mathematics
12.1 Laboratory Analytical Methods, Sampling Procedures & QA/QC 12.2 Chemical Safety, Gaseous Chlorine Handling & Hazard Communication 12.3 Permit-Required Confined Space Entry & Excavation / Trenching Safety 12.4 Electrical Safety, Lockout/Tagout & Machine Guarding 12.5 Biological Hazards, PPE, Heat Stress & Personal Hygiene 12.6 Applied Water & Wastewater Mathematics & Process Calculations 12.7 Process Control Mathematics: Loading, Efficiency, Removal & Solids 12.8 Hydraulics, Pressure & Unit Conversion Mathematics 12.9 Utility Management: Personnel, Budgeting, Public Relations & Plant Security
11.2 Physical/Chemical Treatment Processes for Industrial Wastewater
Key Takeaways Explain This Topic AI
15A NCAC 08G .0306 classifies a system using only a physical process as Grade I Physical/Chemical and a system using a chemical process — including reverse osmosis, electrodialysis, and ultrafiltration — as Grade II.
Metal precipitation is pH driven: each metal hydroxide has its own minimum solubility pH, so a mixed-metal waste stream requires a compromise pH or sequential treatment, and overshooting pH can redissolve amphoteric metals such as zinc, lead, and chromium.
Hexavalent chromium is reduced to trivalent chromium at low pH with sulfur dioxide or bisulfite before precipitation, and cyanide is destroyed by alkaline chlorination at high pH in two stages.
Dissolved air flotation separates low-density solids, oil, and grease by attaching microbubbles, controlled by the air-to-solids ratio, recycle rate, and saturation pressure.
Granular activated carbon adsorbs dissolved organics until breakthrough, which is monitored at an intermediate sample port so the lead vessel can be changed before effluent quality is lost.
Last updated: September 2026
11.2 Physical/Chemical Treatment Processes for Industrial Wastewater
North Carolina's Physical/Chemical needs-to-know covers general operation, laws and regulations, safety, laboratory and sampling, mathematics, and then a long list of unit processes. 08G .0306 sets the classification: a physical process alone is Grade I ; a chemical process — including reverse osmosis, electrodialysis, and ultrafiltration — is Grade II . Visitation under 08G .0204(2)(h) is weekly for Grade I and five days per week for Grade II .
1. Equalization and neutralization
Flow and load equalization is the first unit process in most industrial plants: a mixed, often aerated basin that dampens batch dumps, shift changes, and pH swings so downstream chemistry sees a steady feed. Sizing is based on the diurnal or batch pattern; mixing prevents settling and septicity.
Neutralization adjusts pH toward the range the next process requires:
Acids: sulfuric (cheap, but forms calcium sulfate scale with lime), hydrochloric (no scale, more corrosive), carbon dioxide (self-limiting near pH 6–7, cannot overshoot).
Bases: sodium hydroxide (fast, no sludge added, hazardous), lime (cheap, adds sludge, slower), magnesium hydroxide (self-limiting near pH 9, low sludge, safer to handle), soda ash.
Control: titration curves are steep near neutrality, so single-stage control overshoots. Two- or three-stage neutralization with cascaded pH control is standard for wide-swing waste.
2. Metal precipitation
Dissolved metals are converted to insoluble hydroxides, sulfides, or carbonates and then removed as solids. M(2+) + 2 OH(-) -> M(OH)2 (solid)
The controlling variable is pH , and each metal has its own minimum solubility pH :
- Metal Approximate pH of minimum solubility
- Iron (ferric) 6–7
- Copper 8–9
- Nickel 9–10
- Zinc 9–10 (amphoteric — redissolves above ~10.5)
- Lead 9–10 (amphoteric)
- Chromium (trivalent) 8–9 (amphoteric)
- Cadmium 10–11
Two practical consequences. First, a mixed-metal stream has no single optimum pH , so the operator either selects a compromise or treats sequentially. Second, for amphoteric metals, raising pH too far redissolves the metal — the effluent metal concentration goes back up even though more caustic was added. Sulfide precipitation produces far less soluble metal sulfides and can reach lower effluent concentrations, but it must be carefully controlled to avoid generating hydrogen sulfide gas.
3. Chromium reduction and cyanide destruction
Hexavalent chromium reduction (a two-step sequence):
Lower pH to about 2–3 with acid.
Add a reducing agent — sulfur dioxide, sodium bisulfite, or sodium metabisulfite — to convert Cr(VI) to Cr(III) , monitored by ORP .
Raise pH to 8–9 to precipitate chromium hydroxide.
Alkaline chlorination of cyanide (also two stages):
Stage 1: at pH above 10 , chlorine oxidizes cyanide to cyanate . High pH is not optional — at lower pH the reaction produces cyanogen chloride , a highly toxic gas.
Stage 2: at pH 8–9 , additional chlorine oxidizes cyanate to carbon dioxide and nitrogen.
Both sequences are ORP and pH controlled, and both are classic Grade II Physical/Chemical exam material.
4. Solids and oil separation
Process Principle Control variables
Coagulation/flocculation/clarification Charge neutralization and bridging, then gravity settling Coagulant and polymer dose, mixing energy, pH, sludge blowdown
Dissolved air flotation (DAF) Recycled effluent saturated with air at ~40–70 psi is released, forming microbubbles that attach to solids and float them Air-to-solids ratio (~0.02–0.04 lb air per lb solids) , recycle rate, saturation pressure, polymer, skimmer speed
Gravity oil/water separation (API, CPI) Density difference; corrugated plates shorten rise distance Retention time, sludge and skimmings removal
- Granular media filtration / microscreening Straining and depth filtration Loading rate, head loss, backwash
- Sludge dewatering Filter press, belt press, centrifuge Conditioning chemical, cake solids
Ash sedimentation basins , listed separately in the North Carolina needs-to-know, settle ash sluice water at combustion facilities and are operated like any other settling basin with attention to abrasion and solids removal.
5. Dissolved constituent removal
Granular activated carbon (GAC): adsorbs dissolved organics. Vessels are commonly run in series (lead/lag) with an intermediate sampling port so breakthrough on the lead vessel is detected before it reaches the effluent. Spent carbon is regenerated off site or replaced. Carbon vessels can go anaerobic and generate hydrogen sulfide if left stagnant.
Air stripping: packed towers transfer volatile organics from water to air; efficiency depends on the air-to-water ratio, temperature, and the compound's Henry's constant. Off-gas may require vapor-phase carbon.
Ion exchange: cation and anion resins remove specific ions; regeneration produces a concentrated waste brine that becomes its own disposal problem.
Membranes: ultrafiltration for macromolecules and emulsified oil; reverse osmosis for dissolved salts and metals. Both concentrate the contaminant into a reject stream that must be treated or hauled.
6. Operating discipline in a chemical plant
Jar test before you dose. Metal hydroxide chemistry is waste-specific; a jar test with pH stepping identifies the true optimum rather than the textbook value.
Trust instruments only after verification. pH and ORP probes drift and foul; calibrate on a schedule and confirm with a bench meter.
Respect incompatibilities. Acid and hypochlorite together release chlorine gas; sulfide-bearing waste plus acid releases hydrogen sulfide; cyanide plus acid releases hydrogen cyanide. Segregate storage, label lines, and design for the worst case.
Watch the sludge. Metal hydroxide sludge is voluminous and may be a hazardous waste depending on the process and characteristics — which determines the disposal route and cost.
Batch treat when in doubt. A batch tank that can be tested, adjusted, and released only when in specification is the most forgiving arrangement for variable waste.
Warning
The overshoot trap. If effluent zinc, lead, or trivalent chromium rises after a caustic increase, do not add more caustic. Those metals are amphoteric : above roughly pH 10.5 they redissolve as soluble complexes. The correct action is to bring pH back down into the minimum solubility window and re-test.