Study guide

12.8 Hydraulics, Pressure & Unit Conversion Mathematics

North Carolina Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: North Carolina Regulatory Framework, Certification & Classification

1.1 Dual Regulatory Structure: WTFOCB, WPCSOCC & NC DEQ 1.2 Drinking Water Certification Grades, Eligibility & the Apprentice Pathway 1.3 Examinations, Fees, Renewal, Continuing Education & Discipline 1.4 Classifying Drinking Water Facilities: Rating Values, Classes & Required Operators 1.5 Classifying Water Pollution Control Systems Under 15A NCAC 08G .0300 1.6 Wastewater Certification Types, Experience Ladders, OIT & Reciprocity

2 Chapter 2: Operator in Responsible Charge, Oversight & Regulatory Reporting

2.1 Designating the ORC and Back-up ORC: Forms, Deadlines & Legal Duties 2.2 Mandatory Visitation Frequencies & Facility Oversight 2.3 Operational Logs, Records Retention & Compliance Reporting 2.4 Sanitary Sewer Overflows: Reporting, Press Releases & Public Notice 2.5 The Federal Drinking Water Rule Framework Operators Are Tested On

3 Chapter 3: Drinking Water Treatment: Source Water Through Filtration

3.1 Source Water Quality, Raw Water Intake & Rapid Mixing 3.2 Coagulation Chemistry, Flocculation & Sedimentation Basins 3.3 Granular Media Filtration, Head Loss & Backwash Protocols 3.4 Taste and Odor Control, Powdered Activated Carbon & Algae Management

4 Chapter 4: Disinfection, Chemical Conditioning & Advanced Water Treatment

4.1 Chlorination Chemistry, Breakpoint Chlorination & CT Disinfection Inactivation 4.2 Disinfection Byproducts (TTHM & HAA5), Stage 1/2 DBPR & Enhanced Coagulation 4.3 Corrosion Control, Lead & Copper Rule Revisions, Fluoridation & Groundwater Treatment 4.4 Iron and Manganese Control: Oxidation, Greensand & Sequestration 4.5 Softening, Ion Exchange & Membrane Treatment 4.6 Water Plant Residuals, Backwash Recovery & Waste Disposal

5 Chapter 5: Groundwater Sources, Wells & Small Water Systems

5.1 Well Hydrology, Aquifers & North Carolina Well Construction Standards 5.2 Well Pumps, Wellhead Equipment & Source Protection 5.3 Small Water System Operations, Administration & Plant Recordkeeping

6 Chapter 6: Water Distribution Systems, Storage & Cross-Connection Control

6.1 Water Distribution Hydraulics, Storage Facilities & Water Quality Maintenance 6.2 Water Use, Demand Patterns & Distribution System Design 6.3 Pipe Materials, Main Installation, Service Connections & Meters 6.4 Fire Hydrants, Valve Operation & Distribution Operational Practices 6.5 Pump Hydraulics, Valve Operation & Cross-Connection Control / Backflow Prevention 6.6 System Mapping, Records & Information Management 6.7 Utility Security, Emergency Response & Boil Water Advisories

7 Chapter 7: Instrumentation, Electrical Fundamentals, Maintenance & Microbiological Monitoring

7.1 Instrumentation, Electrical Fundamentals & SCADA 7.2 Preventive Maintenance, Pumps, Motors & Mechanical Equipment 7.3 Bacteriology, Sample Siting Plans & RTCR Compliance Sampling

8 Chapter 8: Biological Wastewater Treatment & Secondary Processes

8.1 Wastewater Characterization, Preliminary Screening & Primary Clarification 8.2 Wastewater Lagoons, Stabilization Ponds & Operational Control 8.3 Constructed Wetlands & Natural Treatment Systems 8.4 Septic Tanks, Media Filters, Aerobic Treatment Units & Grease Interceptors 8.5 Attached Growth Systems: Trickling Filters, RBCs & Fixed-Film Processes 8.6 Activated Sludge Microbiology, Aeration Basins & Secondary Clarifiers 8.7 Operational Process Control: F/M Ratio, MCRT / Sludge Age & SVI

9 Chapter 9: Nutrient Removal, Solids Handling & Effluent Management

9.1 Biological Nutrient Removal (BNR) in NC Nutrient-Sensitive Waters (NSW) 9.2 Sludge Stabilization, Aerobic/Anaerobic Digestion & Biosolids Management 9.3 Digester Gas Systems, Heating, Mixing & Explosion Safety 9.4 Composting, Thermal Drying & Alternative Solids Disposal 9.5 Odor Sources, Measurement & Control Technologies 9.6 Tertiary Filtration, Reclaimed Water & Reuse Under 15A NCAC 02U 9.7 Effluent Disinfection, Dechlorination & NPDES Permit Compliance

10 Chapter 10: Wastewater Collection Systems, Lift Stations & Field Operations

10.1 Wastewater Collection System Design, Lift Stations & Inflow and Infiltration (I/I) 10.2 Manholes, Service Taps, Laterals & Sewer Construction Practice 10.3 Sewer Cleaning, Root Control & Preventive Maintenance Programs 10.4 Collection System Inspection & Acceptance Testing 10.5 Job-Site Pre-Planning, Traffic Control & Field Work Safety

11 Chapter 11: Industrial Pretreatment & Physical/Chemical Treatment

11.1 Industrial Pretreatment Programs & Protecting the POTW 11.2 Physical/Chemical Treatment Processes for Industrial Wastewater 11.3 Groundwater Remediation Systems, Flow Equalization & Flow Measurement

12 Chapter 12: Laboratory, Safety, Utility Management & Applied Mathematics

12.1 Laboratory Analytical Methods, Sampling Procedures & QA/QC 12.2 Chemical Safety, Gaseous Chlorine Handling & Hazard Communication 12.3 Permit-Required Confined Space Entry & Excavation / Trenching Safety 12.4 Electrical Safety, Lockout/Tagout & Machine Guarding 12.5 Biological Hazards, PPE, Heat Stress & Personal Hygiene 12.6 Applied Water & Wastewater Mathematics & Process Calculations 12.7 Process Control Mathematics: Loading, Efficiency, Removal & Solids 12.8 Hydraulics, Pressure & Unit Conversion Mathematics 12.9 Utility Management: Personnel, Budgeting, Public Relations & Plant Security

12.8 Hydraulics, Pressure & Unit Conversion Mathematics

Key Takeaways Explain This Topic AI

Pressure and head convert with two constants: 1 psi equals 2.31 feet of water, and 1 foot of water equals 0.433 psi.

The continuity equation Q = A x V ties flow, area, and velocity together and is the basis of velocity checks in pipes, channels, and grit chambers.

One MGD equals 694.4 gallons per minute and 1.547 cubic feet per second; one cubic foot holds 7.48 gallons and weighs 62.4 pounds.

Water horsepower equals gpm times head in feet divided by 3,960; brake horsepower divides that by pump efficiency, and motor horsepower divides again by motor efficiency.

Wire-to-water efficiency is the product of pump and motor efficiency and is what determines the actual energy cost of moving water.

Last updated: September 2026

  • 12.8 Hydraulics, Pressure & Unit Conversion Mathematics
  • 1. Pressure and head 1 psi = 2.31 feet of water
  • 1 foot of water = 0.433 psi

Examples.

An elevated tank with its water surface 145 feet above a customer's meter delivers 145 × 0.433 = 62.8 psi (before friction losses).

A gauge reading 68 psi corresponds to 68 × 2.31 = 157 feet of head.

A pump that must lift water 210 feet and deliver 40 psi at the top must produce 210 + (40 × 2.31) = 210 + 92.4 = 302.4 feet of total head, plus friction.

Head types: static head is elevation difference only; friction head is energy lost to pipe and fitting resistance; velocity head is V²/2g; and total dynamic head (TDH) is the sum the pump must actually produce.

2. The continuity equation Q = A × V Q = A \times V Q = A × V

where Q is flow, A is cross-sectional area, and V is velocity — in consistent units (cubic feet per second, square feet, feet per second).

Example. An 8-inch main carries 700 gpm. What is the velocity?

  • Area = 0.785 × (8 ÷ 12 ft)² = 0.785 × 0.4444 = 0.349 ft²
  • Flow in cfs = 700 gpm ÷ 448.8 gpm per cfs = 1.56 cfs

V = 1.56 ÷ 0.349 = 4.47 ft/sec — within the normal 2 to 5 ft/sec distribution range.

A useful shortcut for round pipe: V (ft/sec) = gpm ÷ (2.448 × D²) with D in inches. Checking: 700 ÷ (2.448 × 64) = 700 ÷ 156.7 = 4.47 ft/sec .

Grit channel check. The same equation verifies the 1.0 ft/sec grit channel target: if the channel is 2 ft wide with 1.2 ft of water depth and passes 2.2 cfs, V = 2.2 ÷ (2 × 1.2) = 0.92 ft/sec , slightly low — organics will begin settling with the grit.

3. Friction loss

Friction loss rises steeply with velocity (roughly with the 1.85 power in the Hazen-Williams relationship) and falls steeply with diameter. Two operating consequences:

Doubling the flow through a given pipe roughly triples to quadruples the friction loss.

A tuberculated unlined cast iron main with a C-factor of 70 requires more than three times the pumping energy of a smooth main at C = 140 to move the same flow.

That is why leaving a partly closed valve in service, or deferring main replacement, shows up as an electric bill long before it shows up as a complaint.

  • 4. Horsepower and efficiency Water horsepower (WHP) = (gpm x head in feet) / 3,960
  • Brake horsepower (BHP) = WHP / pump efficiency
  • Motor horsepower (MHP) = BHP / motor efficiency
  • Wire-to-water efficiency = pump efficiency x motor efficiency

Worked example. 1,100 gpm against 96 feet TDH, pump efficiency 78 percent, motor efficiency 92 percent.

  • WHP = (1,100 × 96) ÷ 3,960 = 105,600 ÷ 3,960 = 26.7 hp
  • BHP = 26.7 ÷ 0.78 = 34.2 hp
  • MHP = 34.2 ÷ 0.92 = 37.2 hp — a 40 hp motor
  • Wire-to-water efficiency = 0.78 × 0.92 = 0.718, or 71.8 percent

Energy cost. kW = MHP × 0.746 = 37.2 × 0.746 = 27.8 kW . Running 18 hours a day at $0.105/kWh: 27.8 × 18 = 500 kWh/day × $0.105 = $52.50 per day , or roughly $19,160 per year . A five-point improvement in wire-to-water efficiency on that pump is worth about $1,300 a year — which is how an efficiency argument gets made to a budget committee.

5. Areas and volumes

  • Shape Formula
  • Rectangle area L × W
  • Circle area 0.785 × D² (or πr²)
  • Circumference 3.14 × D
  • Rectangular tank volume L × W × D
  • Cylindrical tank volume 0.785 × D² × height
  • Cone volume 1/3 × 0.785 × D² × height
  • Pipe volume (gal) 0.785 × D²(ft) × length(ft) × 7.48
  • Trench / channel volume cross-sectional area × length

Example — pipe volume. How many gallons are in 1,500 feet of 12-inch main?

0.785 × (1.0 ft)² × 1,500 ft = 1,177.5 ft³ × 7.48 = 8,808 gallons — the number you need to size a disinfection dose or a flushing volume.

6. The conversion table that prevents most errors

  • Conversion Value
  • Gallons of water 8.34 lb/gal
  • Cubic foot 7.48 gallons , 62.4 lb
  • 1 MGD 694.4 gpm , 1.547 cfs
  • 1 cfs 448.8 gpm , 0.646 MGD
  • 1 psi 2.31 feet of water
  • 1 foot of water 0.433 psi
  • 1 horsepower 33,000 ft-lb/min , 0.746 kW
  • 1 acre 43,560 ft²
  • 1 acre-foot 325,851 gallons
  • 1 day 1,440 minutes , 86,400 seconds
  • 1 percent 10,000 mg/L
  • 1 mg/L 1 ppm , 8.34 lb per million gallons
  • 1 gallon 3,785 mL
  • °F to °C (°F − 32) × 5/9
  • °C to °F (°C × 9/5) + 32

Note

Diagnose your own arithmetic. When an answer looks impossible, the error is nearly always a conversion: a factor of 8.34 (forgot the weight of water), 7.48 (cubic feet versus gallons), 1,440 (per day versus per minute), 1,000,000 (MGD versus gpd), or 12 (inches versus feet). Check those five before re-deriving the formula.