Study guide

2.3 Operational Logs, Records Retention & Compliance Reporting

North Carolina Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: North Carolina Regulatory Framework, Certification & Classification

1.1 Dual Regulatory Structure: WTFOCB, WPCSOCC & NC DEQ 1.2 Drinking Water Certification Grades, Eligibility & the Apprentice Pathway 1.3 Examinations, Fees, Renewal, Continuing Education & Discipline 1.4 Classifying Drinking Water Facilities: Rating Values, Classes & Required Operators 1.5 Classifying Water Pollution Control Systems Under 15A NCAC 08G .0300 1.6 Wastewater Certification Types, Experience Ladders, OIT & Reciprocity

2 Chapter 2: Operator in Responsible Charge, Oversight & Regulatory Reporting

2.1 Designating the ORC and Back-up ORC: Forms, Deadlines & Legal Duties 2.2 Mandatory Visitation Frequencies & Facility Oversight 2.3 Operational Logs, Records Retention & Compliance Reporting 2.4 Sanitary Sewer Overflows: Reporting, Press Releases & Public Notice 2.5 The Federal Drinking Water Rule Framework Operators Are Tested On

3 Chapter 3: Drinking Water Treatment: Source Water Through Filtration

3.1 Source Water Quality, Raw Water Intake & Rapid Mixing 3.2 Coagulation Chemistry, Flocculation & Sedimentation Basins 3.3 Granular Media Filtration, Head Loss & Backwash Protocols 3.4 Taste and Odor Control, Powdered Activated Carbon & Algae Management

4 Chapter 4: Disinfection, Chemical Conditioning & Advanced Water Treatment

4.1 Chlorination Chemistry, Breakpoint Chlorination & CT Disinfection Inactivation 4.2 Disinfection Byproducts (TTHM & HAA5), Stage 1/2 DBPR & Enhanced Coagulation 4.3 Corrosion Control, Lead & Copper Rule Revisions, Fluoridation & Groundwater Treatment 4.4 Iron and Manganese Control: Oxidation, Greensand & Sequestration 4.5 Softening, Ion Exchange & Membrane Treatment 4.6 Water Plant Residuals, Backwash Recovery & Waste Disposal

5 Chapter 5: Groundwater Sources, Wells & Small Water Systems

5.1 Well Hydrology, Aquifers & North Carolina Well Construction Standards 5.2 Well Pumps, Wellhead Equipment & Source Protection 5.3 Small Water System Operations, Administration & Plant Recordkeeping

6 Chapter 6: Water Distribution Systems, Storage & Cross-Connection Control

6.1 Water Distribution Hydraulics, Storage Facilities & Water Quality Maintenance 6.2 Water Use, Demand Patterns & Distribution System Design 6.3 Pipe Materials, Main Installation, Service Connections & Meters 6.4 Fire Hydrants, Valve Operation & Distribution Operational Practices 6.5 Pump Hydraulics, Valve Operation & Cross-Connection Control / Backflow Prevention 6.6 System Mapping, Records & Information Management 6.7 Utility Security, Emergency Response & Boil Water Advisories

7 Chapter 7: Instrumentation, Electrical Fundamentals, Maintenance & Microbiological Monitoring

7.1 Instrumentation, Electrical Fundamentals & SCADA 7.2 Preventive Maintenance, Pumps, Motors & Mechanical Equipment 7.3 Bacteriology, Sample Siting Plans & RTCR Compliance Sampling

8 Chapter 8: Biological Wastewater Treatment & Secondary Processes

8.1 Wastewater Characterization, Preliminary Screening & Primary Clarification 8.2 Wastewater Lagoons, Stabilization Ponds & Operational Control 8.3 Constructed Wetlands & Natural Treatment Systems 8.4 Septic Tanks, Media Filters, Aerobic Treatment Units & Grease Interceptors 8.5 Attached Growth Systems: Trickling Filters, RBCs & Fixed-Film Processes 8.6 Activated Sludge Microbiology, Aeration Basins & Secondary Clarifiers 8.7 Operational Process Control: F/M Ratio, MCRT / Sludge Age & SVI

9 Chapter 9: Nutrient Removal, Solids Handling & Effluent Management

9.1 Biological Nutrient Removal (BNR) in NC Nutrient-Sensitive Waters (NSW) 9.2 Sludge Stabilization, Aerobic/Anaerobic Digestion & Biosolids Management 9.3 Digester Gas Systems, Heating, Mixing & Explosion Safety 9.4 Composting, Thermal Drying & Alternative Solids Disposal 9.5 Odor Sources, Measurement & Control Technologies 9.6 Tertiary Filtration, Reclaimed Water & Reuse Under 15A NCAC 02U 9.7 Effluent Disinfection, Dechlorination & NPDES Permit Compliance

10 Chapter 10: Wastewater Collection Systems, Lift Stations & Field Operations

10.1 Wastewater Collection System Design, Lift Stations & Inflow and Infiltration (I/I) 10.2 Manholes, Service Taps, Laterals & Sewer Construction Practice 10.3 Sewer Cleaning, Root Control & Preventive Maintenance Programs 10.4 Collection System Inspection & Acceptance Testing 10.5 Job-Site Pre-Planning, Traffic Control & Field Work Safety

11 Chapter 11: Industrial Pretreatment & Physical/Chemical Treatment

11.1 Industrial Pretreatment Programs & Protecting the POTW 11.2 Physical/Chemical Treatment Processes for Industrial Wastewater 11.3 Groundwater Remediation Systems, Flow Equalization & Flow Measurement

12 Chapter 12: Laboratory, Safety, Utility Management & Applied Mathematics

12.1 Laboratory Analytical Methods, Sampling Procedures & QA/QC 12.2 Chemical Safety, Gaseous Chlorine Handling & Hazard Communication 12.3 Permit-Required Confined Space Entry & Excavation / Trenching Safety 12.4 Electrical Safety, Lockout/Tagout & Machine Guarding 12.5 Biological Hazards, PPE, Heat Stress & Personal Hygiene 12.6 Applied Water & Wastewater Mathematics & Process Calculations 12.7 Process Control Mathematics: Loading, Efficiency, Removal & Solids 12.8 Hydraulics, Pressure & Unit Conversion Mathematics 12.9 Utility Management: Personnel, Budgeting, Public Relations & Plant Security

2.3 Operational Logs, Records Retention & Compliance Reporting

Key Takeaways Explain This Topic AI

15A NCAC 08G .0204(5) requires the ORC to document operation, maintenance, and all visitation of the system in a log that is maintained at the system, and .0204(4) requires the ORC to certify by signature the validity of all monitoring and reporting information.

Drinking water test results must be reported monthly on Department forms signed by the ORC and submitted by the 10th day of the following month, and records documenting compliance with 15A NCAC 18C Section .1300 must be kept on the premises for at least three years.

Federal drinking water recordkeeping under 40 CFR 141.33 requires bacteriological results for at least five years and chemical analyses for at least ten years; lead and copper records are kept for 12 years.

NPDES permittees must retain monitoring records, calibration and maintenance records, and copies of reports for at least three years under 40 CFR 122.41(j)(2), and must report noncompliance that endangers health or the environment within 24 hours with a written report within five days.

Cross-connection control program records under 15A NCAC 18C .0406(b)(6) apply to systems with five or more testable assemblies, and field test results must be kept a minimum of four years.

Last updated: September 2026

2.3 Operational Logs, Records Retention & Compliance Reporting

Important

The log is the evidence. In an enforcement case the logbook is what proves a certified operator visited the system at the required frequency, ran the required tests, and made the adjustments recorded on the monthly report. Falsifying it is grounds for revocation under G.S. 90A-26 and G.S. 90A-41 and can support criminal charges under G.S. 143-215.6B.

What the rules actually require in the log

Wastewater — 15A NCAC 08G .0204(5): the ORC shall "document the operation, maintenance, and all visitation of the system in a log that shall be maintained at the system." Paragraph (4) adds that the ORC shall "certify by signature the validity of all monitoring and reporting information performed on the system as prescribed in any permit issued for the system" and provide the owner a copy of the monitoring and reporting forms.

Drinking water — 15A NCAC 18C .1303(a): during each oversight visit the operator performs a visual inspection from source to entry point, adjusts equipment settings, fills chemical feed tanks as needed, records the dates and quantities of chemicals added , and performs the physical and chemical tests required on the plant monthly operation report.

A defensible entry therefore includes, at minimum:

Date and the times of arrival and departure — this is what demonstrates compliance with the 20 percent rule or the five-day-per-week rule.

Printed name, signature, and certificate number of the visiting operator, and the role held (ORC, Back-up ORC, certified operator on duty, temporary ORC).

Chemicals : product and strength, quantity added or consumed, tank levels, feed pump settings, drawdown results, and the calculated dose.

Process control tests run on site: free and total chlorine, pH, turbidity, dissolved oxygen, settleability, temperature, and totalized flow.

Adjustments and abnormal conditions : WAS and RAS rate changes, backwash initiations, alarms, outages, weather, equipment out of service.

Vague entries such as "checked plant, all OK" do not show what was inspected or tested and will not satisfy an inspector reconstructing a compliance question months later.

Where the log lives

The wastewater rule is explicit that the log is maintained at the system . For a collection system, the practical equivalent is the maintenance operations base where the collection records, inspection logs, and lift station run-time sheets are kept. Electronic logs are acceptable where the system provides an auditable record — user authentication, time stamps, and preservation of the original entry when an edit is made — but paper logs should be permanently bound with numbered pages so that pages cannot be inserted or removed.

Retention periods operators must know

Record Minimum retention Source

Records documenting compliance with 15A NCAC 18C Section .1300 (operation of public water supplies) 3 years on the premises 18C .1302(b)(3)

NPDES monitoring records, calibration and maintenance records, original strip charts, and copies of reports 3 years (extendable by the Director) 40 CFR 122.41(j)(2)

  • Drinking water bacteriological analyses 5 years 40 CFR 141.33(a)
  • Drinking water chemical analyses 10 years 40 CFR 141.33(b)
  • Lead and copper monitoring and service line records 12 years 40 CFR 141.91
  • Well disinfection records (ANSI/AWWA C654 compliance) 3 years 18C .1002(c)
  • Cross-connection control field test results and air gap inspections 4 years 18C .0406(b)(6)(F)
  • Press release and media distribution list for an untreated wastewater discharge 1 year G.S. 143-215.1C(b)(1)
  • Monthly reporting channels

Drinking water. Under 18C .1302(b)(1) test results are documented and reported monthly on forms and in a format provided by the Department, signed by the ORC , and submitted to the Public Water Supply Section by the 10th day of the following month . Electronic submission is required for systems owned or operated by local governments and for all community systems serving 1,000 or more connections or 3,000 or more individuals; smaller community systems and all non-transient non-community systems also report electronically under .1302(b)(2). These are the monthly operating reports (MORs) operators know as eMORs.

Distribution residual monitoring. 18C .1302(a)(2) sets the weekly sampling load by distribution class in Table A : Class D systems take 1 residual disinfectant sample per week, Class C systems 3 , and Class A and B systems 5 , at locations representing maximum residence time or high water age designated on the sample siting plan. Samples collected on the same day must come from different locations. Systems using chloramines must also measure total chlorine, monochloramine, free ammonia, and pH daily at the entry point while the plant operates , and in the distribution system no less often than Table A.

Wastewater. NPDES permittees submit electronic discharge monitoring reports (eDMRs) on the schedule in the permit. Federal permit conditions in 40 CFR 122.41(l) require reporting of planned changes, anticipated noncompliance, and 24-hour reporting of any noncompliance that may endanger health or the environment , with a written submission within five days describing the noncompliance, its cause, its exact dates and duration (or expected duration), and the steps taken or planned to reduce, eliminate, and prevent recurrence.

Warning

Signature equals certification. When the ORC signs an eDMR or eMOR, the signature certifies that the data are accurate and were produced by approved methods. Signing reports for a system the operator has not actually visited at the required frequency is the single most common route to a WPCSOCC or WTFOCB disciplinary action.