Study guide

1.2 Drinking Water Certification Grades, Eligibility & the Apprentice Pathway

North Carolina Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: North Carolina Regulatory Framework, Certification & Classification

1.1 Dual Regulatory Structure: WTFOCB, WPCSOCC & NC DEQ 1.2 Drinking Water Certification Grades, Eligibility & the Apprentice Pathway 1.3 Examinations, Fees, Renewal, Continuing Education & Discipline 1.4 Classifying Drinking Water Facilities: Rating Values, Classes & Required Operators 1.5 Classifying Water Pollution Control Systems Under 15A NCAC 08G .0300 1.6 Wastewater Certification Types, Experience Ladders, OIT & Reciprocity

2 Chapter 2: Operator in Responsible Charge, Oversight & Regulatory Reporting

2.1 Designating the ORC and Back-up ORC: Forms, Deadlines & Legal Duties 2.2 Mandatory Visitation Frequencies & Facility Oversight 2.3 Operational Logs, Records Retention & Compliance Reporting 2.4 Sanitary Sewer Overflows: Reporting, Press Releases & Public Notice 2.5 The Federal Drinking Water Rule Framework Operators Are Tested On

3 Chapter 3: Drinking Water Treatment: Source Water Through Filtration

3.1 Source Water Quality, Raw Water Intake & Rapid Mixing 3.2 Coagulation Chemistry, Flocculation & Sedimentation Basins 3.3 Granular Media Filtration, Head Loss & Backwash Protocols 3.4 Taste and Odor Control, Powdered Activated Carbon & Algae Management

4 Chapter 4: Disinfection, Chemical Conditioning & Advanced Water Treatment

4.1 Chlorination Chemistry, Breakpoint Chlorination & CT Disinfection Inactivation 4.2 Disinfection Byproducts (TTHM & HAA5), Stage 1/2 DBPR & Enhanced Coagulation 4.3 Corrosion Control, Lead & Copper Rule Revisions, Fluoridation & Groundwater Treatment 4.4 Iron and Manganese Control: Oxidation, Greensand & Sequestration 4.5 Softening, Ion Exchange & Membrane Treatment 4.6 Water Plant Residuals, Backwash Recovery & Waste Disposal

5 Chapter 5: Groundwater Sources, Wells & Small Water Systems

5.1 Well Hydrology, Aquifers & North Carolina Well Construction Standards 5.2 Well Pumps, Wellhead Equipment & Source Protection 5.3 Small Water System Operations, Administration & Plant Recordkeeping

6 Chapter 6: Water Distribution Systems, Storage & Cross-Connection Control

6.1 Water Distribution Hydraulics, Storage Facilities & Water Quality Maintenance 6.2 Water Use, Demand Patterns & Distribution System Design 6.3 Pipe Materials, Main Installation, Service Connections & Meters 6.4 Fire Hydrants, Valve Operation & Distribution Operational Practices 6.5 Pump Hydraulics, Valve Operation & Cross-Connection Control / Backflow Prevention 6.6 System Mapping, Records & Information Management 6.7 Utility Security, Emergency Response & Boil Water Advisories

7 Chapter 7: Instrumentation, Electrical Fundamentals, Maintenance & Microbiological Monitoring

7.1 Instrumentation, Electrical Fundamentals & SCADA 7.2 Preventive Maintenance, Pumps, Motors & Mechanical Equipment 7.3 Bacteriology, Sample Siting Plans & RTCR Compliance Sampling

8 Chapter 8: Biological Wastewater Treatment & Secondary Processes

8.1 Wastewater Characterization, Preliminary Screening & Primary Clarification 8.2 Wastewater Lagoons, Stabilization Ponds & Operational Control 8.3 Constructed Wetlands & Natural Treatment Systems 8.4 Septic Tanks, Media Filters, Aerobic Treatment Units & Grease Interceptors 8.5 Attached Growth Systems: Trickling Filters, RBCs & Fixed-Film Processes 8.6 Activated Sludge Microbiology, Aeration Basins & Secondary Clarifiers 8.7 Operational Process Control: F/M Ratio, MCRT / Sludge Age & SVI

9 Chapter 9: Nutrient Removal, Solids Handling & Effluent Management

9.1 Biological Nutrient Removal (BNR) in NC Nutrient-Sensitive Waters (NSW) 9.2 Sludge Stabilization, Aerobic/Anaerobic Digestion & Biosolids Management 9.3 Digester Gas Systems, Heating, Mixing & Explosion Safety 9.4 Composting, Thermal Drying & Alternative Solids Disposal 9.5 Odor Sources, Measurement & Control Technologies 9.6 Tertiary Filtration, Reclaimed Water & Reuse Under 15A NCAC 02U 9.7 Effluent Disinfection, Dechlorination & NPDES Permit Compliance

10 Chapter 10: Wastewater Collection Systems, Lift Stations & Field Operations

10.1 Wastewater Collection System Design, Lift Stations & Inflow and Infiltration (I/I) 10.2 Manholes, Service Taps, Laterals & Sewer Construction Practice 10.3 Sewer Cleaning, Root Control & Preventive Maintenance Programs 10.4 Collection System Inspection & Acceptance Testing 10.5 Job-Site Pre-Planning, Traffic Control & Field Work Safety

11 Chapter 11: Industrial Pretreatment & Physical/Chemical Treatment

11.1 Industrial Pretreatment Programs & Protecting the POTW 11.2 Physical/Chemical Treatment Processes for Industrial Wastewater 11.3 Groundwater Remediation Systems, Flow Equalization & Flow Measurement

12 Chapter 12: Laboratory, Safety, Utility Management & Applied Mathematics

12.1 Laboratory Analytical Methods, Sampling Procedures & QA/QC 12.2 Chemical Safety, Gaseous Chlorine Handling & Hazard Communication 12.3 Permit-Required Confined Space Entry & Excavation / Trenching Safety 12.4 Electrical Safety, Lockout/Tagout & Machine Guarding 12.5 Biological Hazards, PPE, Heat Stress & Personal Hygiene 12.6 Applied Water & Wastewater Mathematics & Process Calculations 12.7 Process Control Mathematics: Loading, Efficiency, Removal & Solids 12.8 Hydraulics, Pressure & Unit Conversion Mathematics 12.9 Utility Management: Personnel, Budgeting, Public Relations & Plant Security

1.2 Drinking Water Certification Grades, Eligibility & the Apprentice Pathway

Key Takeaways Explain This Topic AI

Under 15A NCAC 18D .0201 the WTFOCB issues Grades C, B, and A Surface; Grades D, C, B, and A Well; Grades D, C, B, and A Distribution; and a Cross-Connection Control certification — there is no Grade D-Surface certification.

Every applicant must be at least 18 years old and hold a high school diploma or GED before any certification is issued, and each grade requires both a Board-approved school and specific acceptable experience.

Acceptable experience under 18D .0105(1) means at least 50 percent of the applicant's duties are active on-site operational duties of the matching facility type (surface, well, distribution, or cross-connection control).

Grade C-Distribution and Grade B-Distribution applicants must also hold a certificate of completion of Board-approved trench shoring training.

An Apprentice certificate under 18D .0201(13) is issued to someone who completed a Grade B, C, D, or cross-connection control school and scored at least 70 percent, may be renewed annually for a maximum of five years, and may never act as a certified operator or ORC.

Last updated: September 2026

1.2 Drinking Water Certification Grades, Eligibility & the Apprentice Pathway

Important

Facility first, operator second. North Carolina classifies the facility (18D .0203 and .0205), then requires an operator in responsible charge whose certificate equals or exceeds that classification. Your certificate is always tied to a facility type as well as a grade: a Grade A-Surface certificate does not let you serve as ORC of a Class B distribution system.

The four drinking water certification types Surface water treatment: Grade C --> Grade B --> Grade A (no Grade D)

  • Well (groundwater) treatment: Grade D --> Grade C --> Grade B --> Grade A
  • Distribution systems: Grade D --> Grade C --> Grade B --> Grade A
  • Cross-Connection Control: single grade (CC)
  • Apprentice: pre-experience certificate, max 5 annual renewals

Warning

High-frequency trap: exam writers offer "Grade D-Surface" as a distractor. 15A NCAC 18D .0201 does not create a D-Surface grade. Surface certification begins at Grade C. Grade D exists only for Well and Distribution .

Baseline requirements for every applicant

18D .0201(a) requires that applicants be at least 18 years old and possess a high school diploma or GED . Beyond that, each grade adds an approved school plus qualifying experience. Applications must be filed with the Board and submitted at least 30 days before the examination date (18D .0301(b)), signed by the applicant and recommended by the applicant's supervisor.

What counts as "acceptable experience" (18D .0105(1))

For every surface, well, or distribution grade, acceptable experience means at least 50 percent of the applicant's duties consist of active on-site operational duties at the matching facility type, based on the use of mathematics, equipment, materials, maintenance, installation and repair techniques, cross-connection control, and related skills. The remaining duties may be in related fields such as wastewater operation, a water or wastewater laboratory, pumping stations, system design and engineering, wells, or distribution. Public Water Supply Section staff may count their time if at least 50 percent of their duties involve inspection or on-site technical assistance to public water systems.

Grade-by-grade requirements (15A NCAC 18D .0201)

  • Grade Experience required School required
  • C-Surface 6 months at a surface water facility C-Surface school

B-Surface Bachelor's in physical/natural science or two-year water & wastewater technology diploma plus 6 months surface experience; or 1 year surface experience while holding C-Surface B-Surface school

  • A-Surface 1 year at a surface facility while holding Grade B-Surface A-Surface school
  • D-Well 3 months at a well facility C-Well or D-Well school

C-Well Degree route with 3 months well experience; or 6 months well experience; or hold Grade A-Surface or A-Distribution C-Well school

  • B-Well Degree route with 6 months; or 1 year while holding C-Well B-Well school
  • A-Well 1 year while holding Grade B-Well A-Well school
  • D-Distribution 3 months at a distribution system C- or D-Distribution school

C-Distribution Degree route with 3 months at Class C or higher; or 6 months at Class D or higher — plus Board-approved trench shoring training C-Distribution school

B-Distribution Degree route with 6 months at Class B or higher plus trench shoring training ; or 1 year at Class C or higher while holding C-Distribution B-Distribution school

A-Distribution 1 year at Class B or higher while holding Grade B-Distribution A-Distribution school

Cross-Connection Control Degree route; or 6 months at Class D-Distribution or higher, or one year operating backflow prevention devices; or be an NC-licensed plumbing contractor Cross-connection control school

Notice the structural rule that examiners test: the A and B grades are built on top of the grade below them . You cannot jump from no certificate to Grade A-Surface; you hold C, gain a year, take the B school, then hold B, gain another year, and take the A school. The only bypass routes written into the rule are the degree/diploma routes at the B and C levels and the lateral route into C-Well for holders of Grade A-Surface or A-Distribution.

Out-of-state and military applicants

18D .0201(b) requires out-of-state applicants to submit an application describing current employment, the type of license held in the state of origin, years of water treatment experience, and a listing of plant experience. Military applicants attach a copy of their Verification of Military Experience and Training (VMET) . The Board compares those requirements against North Carolina's to decide whether they are equivalent. Note the contrast with wastewater: the WPCSOCC grants reciprocity only after the applicant passes a Commission-administered exam (08G .0410).

The Apprentice certificate (18D .0201(13))

The Apprentice pathway exists so a new entrant can test before earning the required experience.

Eligibility. Meet the education requirement and satisfactorily complete a Board-approved Grade B, Grade C, Grade D, or cross-connection control school.

Examination. Correctly answer at least 70 percent of the questions on the examination designed for the class of certification sought.

Status. The Board issues an Apprentice certificate . It may be renewed annually for a maximum of five years , subject to the same renewal fee and professional growth requirements as any other certificate.

Hard limit. "An apprentice shall not act as a certified operator or an Operator in Responsible Charge for a facility." The apprentice works under a certified operator.

Conversion. Once the applicable experience in .0201 is met, the apprentice applies to the Board for the Grade B, C, D, or cross-connection control certificate. Under 18D .0304(a) the cost of upgrading an apprentice to Grade C, D, or CC certification is fifty dollars ($50.00) .

Note

Apprentice is a drinking water term. The wastewater equivalent is the Operator in Training (OIT) certificate under 15A NCAC 08G .0408, which is issued when an applicant has met the education and prerequisite certification requirements but not the experience requirement. Like an apprentice, an OIT may not be designated ORC or Back-up ORC. Do not mix the two names on the exam.

Temporary certificates

Under G.S. 90A-25(e) and 18D .0404 , the Board may issue a temporary certificate without examination when the supply of certified operators (or of people with the training necessary for certification) is inadequate. A temporary certificate is valid for one year , applies only to the system where the operator is employed at the time of issuance , and may not be renewed more than one time at the same grade or for the same facility. The fee is $50.00 (18D .0304(b)). Temporary certificates are the legal bridge a system uses when, for example, its only Grade C-Surface operator resigns and 18D .0206(b) requires the position to be filled within 90 days.