Study guide
6.6 System Mapping, Records & Information Management
North Carolina Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: North Carolina Regulatory Framework, Certification & Classification
1.1 Dual Regulatory Structure: WTFOCB, WPCSOCC & NC DEQ 1.2 Drinking Water Certification Grades, Eligibility & the Apprentice Pathway 1.3 Examinations, Fees, Renewal, Continuing Education & Discipline 1.4 Classifying Drinking Water Facilities: Rating Values, Classes & Required Operators 1.5 Classifying Water Pollution Control Systems Under 15A NCAC 08G .0300 1.6 Wastewater Certification Types, Experience Ladders, OIT & Reciprocity
2 Chapter 2: Operator in Responsible Charge, Oversight & Regulatory Reporting
2.1 Designating the ORC and Back-up ORC: Forms, Deadlines & Legal Duties 2.2 Mandatory Visitation Frequencies & Facility Oversight 2.3 Operational Logs, Records Retention & Compliance Reporting 2.4 Sanitary Sewer Overflows: Reporting, Press Releases & Public Notice 2.5 The Federal Drinking Water Rule Framework Operators Are Tested On
3 Chapter 3: Drinking Water Treatment: Source Water Through Filtration
3.1 Source Water Quality, Raw Water Intake & Rapid Mixing 3.2 Coagulation Chemistry, Flocculation & Sedimentation Basins 3.3 Granular Media Filtration, Head Loss & Backwash Protocols 3.4 Taste and Odor Control, Powdered Activated Carbon & Algae Management
4 Chapter 4: Disinfection, Chemical Conditioning & Advanced Water Treatment
4.1 Chlorination Chemistry, Breakpoint Chlorination & CT Disinfection Inactivation 4.2 Disinfection Byproducts (TTHM & HAA5), Stage 1/2 DBPR & Enhanced Coagulation 4.3 Corrosion Control, Lead & Copper Rule Revisions, Fluoridation & Groundwater Treatment 4.4 Iron and Manganese Control: Oxidation, Greensand & Sequestration 4.5 Softening, Ion Exchange & Membrane Treatment 4.6 Water Plant Residuals, Backwash Recovery & Waste Disposal
5 Chapter 5: Groundwater Sources, Wells & Small Water Systems
5.1 Well Hydrology, Aquifers & North Carolina Well Construction Standards 5.2 Well Pumps, Wellhead Equipment & Source Protection 5.3 Small Water System Operations, Administration & Plant Recordkeeping
6 Chapter 6: Water Distribution Systems, Storage & Cross-Connection Control
6.1 Water Distribution Hydraulics, Storage Facilities & Water Quality Maintenance 6.2 Water Use, Demand Patterns & Distribution System Design 6.3 Pipe Materials, Main Installation, Service Connections & Meters 6.4 Fire Hydrants, Valve Operation & Distribution Operational Practices 6.5 Pump Hydraulics, Valve Operation & Cross-Connection Control / Backflow Prevention 6.6 System Mapping, Records & Information Management 6.7 Utility Security, Emergency Response & Boil Water Advisories
7 Chapter 7: Instrumentation, Electrical Fundamentals, Maintenance & Microbiological Monitoring
7.1 Instrumentation, Electrical Fundamentals & SCADA 7.2 Preventive Maintenance, Pumps, Motors & Mechanical Equipment 7.3 Bacteriology, Sample Siting Plans & RTCR Compliance Sampling
8 Chapter 8: Biological Wastewater Treatment & Secondary Processes
8.1 Wastewater Characterization, Preliminary Screening & Primary Clarification 8.2 Wastewater Lagoons, Stabilization Ponds & Operational Control 8.3 Constructed Wetlands & Natural Treatment Systems 8.4 Septic Tanks, Media Filters, Aerobic Treatment Units & Grease Interceptors 8.5 Attached Growth Systems: Trickling Filters, RBCs & Fixed-Film Processes 8.6 Activated Sludge Microbiology, Aeration Basins & Secondary Clarifiers 8.7 Operational Process Control: F/M Ratio, MCRT / Sludge Age & SVI
9 Chapter 9: Nutrient Removal, Solids Handling & Effluent Management
9.1 Biological Nutrient Removal (BNR) in NC Nutrient-Sensitive Waters (NSW) 9.2 Sludge Stabilization, Aerobic/Anaerobic Digestion & Biosolids Management 9.3 Digester Gas Systems, Heating, Mixing & Explosion Safety 9.4 Composting, Thermal Drying & Alternative Solids Disposal 9.5 Odor Sources, Measurement & Control Technologies 9.6 Tertiary Filtration, Reclaimed Water & Reuse Under 15A NCAC 02U 9.7 Effluent Disinfection, Dechlorination & NPDES Permit Compliance
10 Chapter 10: Wastewater Collection Systems, Lift Stations & Field Operations
10.1 Wastewater Collection System Design, Lift Stations & Inflow and Infiltration (I/I) 10.2 Manholes, Service Taps, Laterals & Sewer Construction Practice 10.3 Sewer Cleaning, Root Control & Preventive Maintenance Programs 10.4 Collection System Inspection & Acceptance Testing 10.5 Job-Site Pre-Planning, Traffic Control & Field Work Safety
11 Chapter 11: Industrial Pretreatment & Physical/Chemical Treatment
11.1 Industrial Pretreatment Programs & Protecting the POTW 11.2 Physical/Chemical Treatment Processes for Industrial Wastewater 11.3 Groundwater Remediation Systems, Flow Equalization & Flow Measurement
12 Chapter 12: Laboratory, Safety, Utility Management & Applied Mathematics
12.1 Laboratory Analytical Methods, Sampling Procedures & QA/QC 12.2 Chemical Safety, Gaseous Chlorine Handling & Hazard Communication 12.3 Permit-Required Confined Space Entry & Excavation / Trenching Safety 12.4 Electrical Safety, Lockout/Tagout & Machine Guarding 12.5 Biological Hazards, PPE, Heat Stress & Personal Hygiene 12.6 Applied Water & Wastewater Mathematics & Process Calculations 12.7 Process Control Mathematics: Loading, Efficiency, Removal & Solids 12.8 Hydraulics, Pressure & Unit Conversion Mathematics 12.9 Utility Management: Personnel, Budgeting, Public Relations & Plant Security
6.6 System Mapping, Records & Information Management
Key Takeaways Explain This Topic AI
An accurate distribution map showing mains, sizes, materials, valves, hydrants, and services is the single most valuable operational record a utility owns during an emergency.
Valve and hydrant records should carry location, size, type, direction of operation, turns to close, date last exercised, and condition.
As-built drawings must be updated after every main extension, repair, and abandonment, otherwise the map degrades into a liability.
Service line material must be recorded for both the utility-owned and customer-owned portions to satisfy the Lead and Copper Rule Revisions service line inventory.
North Carolina requires operational records documenting compliance with 15A NCAC 18C Section .1300 to be kept on the premises for three years, with longer federal retention for bacteriological, chemical, and lead and copper data.
Last updated: September 2026
6.6 System Mapping, Records & Information Management
The Distribution needs-to-know outline devotes a full topic area to Information Management and System Mapping , for a simple reason: at 2 a.m. during a main break, the map is the difference between isolating one block and shutting down half the town.
1. What belongs on the map
- Layer Attributes to carry
- Mains Size, material, class, install year, joint type, lining
- Valves Size, type, direction of operation, turns to close, last exercised date, condition
- Hydrants Size and number of nozzles, auxiliary valve location, flow class color, last inspected/flowed
Services Tap size and location, material of utility-owned and customer-owned portions , meter size and serial number
- Storage and pumping Overflow elevation, capacity, pump curves, control setpoints
- Pressure zones Zone boundaries, PRV and booster station locations and setpoints
- Sampling Routine and repeat bacteriological sites, residual monitoring sites, DBP compliance sites
A valve and hydrant card (paper or GIS attribute record) that records turns-to-close is quietly one of the most useful tools in the field: if a valve that always took 32 turns now stops at 18, something is broken or obstructed in the valve.
2. Keeping records accurate
Field mark before, sketch after. Every main extension, repair, cut-in, and abandonment produces a red-lined sketch with measured ties to at least two permanent features.
Close the loop. The red-line becomes an updated as-built and an updated GIS record. A utility that draws red-lines and never files them has a map that is worse than no map, because crews trust it.
Record abandonments. An abandoned main left on the map wastes hours during an emergency; an abandoned main missing from the map produces a surprise during excavation.
Tie records to work orders. Repairs, leak repairs, valve exercising, hydrant inspections, and meter changes should all be recorded against the asset, which then produces a maintenance history.
3. Service line inventory
The Lead and Copper Rule Revisions require every public water system to develop and maintain a service line inventory categorizing each service line — both the utility-owned and the customer-owned portion — as lead , galvanized requiring replacement , non-lead , or lead status unknown , and to make the inventory publicly accessible. Under the LCRI , systems must replace lead and galvanized-requiring-replacement lines, generally within 10 years of the November 1, 2027 compliance date.
Practical inventory methods include historical records and tap cards, visual inspection at the meter box, mechanical scratch-and-magnet testing, vacuum excavation potholing, and predictive modeling validated by field verification. Every service the crew touches for any reason is an opportunity to confirm and record the material on both sides of the meter.
4. Records the rules require
- Record Retention Source
- Records documenting compliance with 18C Section .1300 3 years on the premises 18C .1302(b)(3)
- Bacteriological analyses 5 years 40 CFR 141.33
- Chemical analyses 10 years 40 CFR 141.33
- Lead and copper monitoring and inventory records 12 years 40 CFR 141.91
- Cross-connection field test results and air gap inspections 4 years 18C .0406(b)(6)(F)
- Well disinfection records (C654) 3 years 18C .1002(c)
- Press release and distribution list for an untreated wastewater discharge 1 year G.S. 143-215.1C(b)(1)
The ORC's own reporting. Under 18D .0701(d) the ORC reports, with each annual certification renewal, the names and PWSID numbers of every system for which they serve as ORC — and under .0701(e) must notify the Board in writing within 10 days of taking on or relinquishing a system.
5. Turning records into asset management
A basic asset management program answers five questions: What do we own? Where is it? What condition is it in? What is its remaining life? What will it cost to replace? Built from the same records:
Break history by main identifies the pipe segments to replace first — usually a small fraction of the system generating most of the breaks.
Valve exercising results identify the valves to replace before the next emergency.
Meter change-out history quantifies apparent loss recovery.
Age and material inventory feeds the capital plan and the rate study.
Note
Security caution. Detailed system maps are sensitive. Keep field copies controlled, restrict public-facing GIS to what is genuinely public, and treat hydraulic models, SCADA screens, and critical asset locations as protected information under the utility's security plan.