Study guide

1.1 About the NCCCO Rigger Level I Exam

NCCCO Rigger Level I Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 About the NCCCO Rigger Level I Exam 1.2 Level I vs Level II Scope 1.3 Eligibility, Fees, and Recertification

2 Scope: Load Path and Characteristics

2.1 Identifying the Load Travel Path 2.2 Load Weight and Center of Gravity 2.3 Attachment Points and Lift Points

3 Scope: Hazards and Unsafe Practices

3.1 Special Handling Requirements 3.2 Pinch Points and Softeners 3.3 Load Stability, Shock Load, and Side Loading 3.4 Electrical Hazards, Body Positioning, and Hazard Communication

4 Technical Knowledge: ASME Standards

4.1 ASME B30.9 Slings and B30.10 Hooks 4.2 ASME B30.26 Hardware and B30.20 Below-the-Hook

5 Technical Knowledge: OSHA Regulations

5.1 OSHA 1910.184 and 1926.251 5.2 OSHA 1926.1401 Qualified Rigger 5.3 OSHA 1926.1431 Hoisting Personnel

6 Inspection: Foundations, Wire Rope, and Chain

6.1 Frequent vs Periodic Inspection 6.2 Wire Rope Sling Inspection and Removal Criteria 6.3 Chain Sling Inspection and Removal Criteria

7 Inspection: Synthetic and Specialty Slings

7.1 Synthetic Web Sling Inspection 7.2 Synthetic Round Sling Inspection 7.3 Metal Mesh and Synthetic Rope Sling Inspection

8 Inspection: Hooks, Hardware, and Below-the-Hook Devices

8.1 Hook Inspection (ASME B30.10) 8.2 Shackles, Eyebolts, and Hardware Inspection 8.3 Below-the-Hook Device Inspection

9 Execution: Sling Types and Identification

9.1 Chain and Wire Rope Sling Use 9.2 Synthetic Web and Round Sling Use 9.3 Sling Identification Tags and WLL

10 Execution: Hitches, Angles, and Capacity

10.1 Vertical, Choker, and Basket Hitches 10.2 Sling Angle Factors 10.3 Hitch Capacity Calculations 10.4 Edge Protection and D/d Ratio

11 Execution: Rigging Hardware in Use

11.1 Shackles and Hooks in Use 11.2 Eyebolts and Swivel Hoist Rings 11.3 Wire Rope Clips and Compression Hardware 11.4 Blocks, Beam Clamps, Softeners, and Related Gear

12 Execution: Below-the-Hook Devices, Tag Lines, and Knots

12.1 Below-the-Hook Lifting Devices 12.2 Tag Line Use and Load Control 12.3 Basic Knots for Riggers

13 Execution: Post-Lift Activities and Communication

13.1 Securing, Disconnecting, and Stowing Gear 13.3 Stop Authority and Lift Communication

14 Practical Exam Prep and Study Strategy

14.1 Level I Practical Exam Tasks 14.2 Study Strategy and Exam Day

1.1 About the NCCCO Rigger Level I Exam

Key Takeaways Explain This Topic AI

The CCO Rigger Level I written exam has 60 multiple-choice questions and a 60-minute time limit (official NCCCO).

Domain weights are Scope ~15%, Technical Knowledge ~13%, Inspection ~30%, and Execution of Rigging Activity ~42%.

Both written and practical exams are required; written delivery options are OPT, TCT, and EOT.

CCO Rigger certification is valid for five years from the certification date.

A Certified Rigger Level I performs simple, repetitive rigging when load weight, center of gravity, rigging, and configuration are provided or already known.

Last updated: July 2026

1.1 About the NCCCO Rigger Level I Exam

Quick Answer: The CCO Certified Rigger Level I written exam is 60 multiple-choice questions in 60 minutes . You must also pass a practical exam . Certification is valid for five years . Level I riggers perform simple, repetitive rigging when load weight, center of gravity (CG), rigging, and configuration are provided or already known .

The National Commission for the Certification of Crane Operators (NCCCO) issues CCO credentials. The Rigger Level I program was built by industry experts so employers, owners, and job sites have a consistent way to verify that a person can inspect gear, select basic hitches, and execute routine lifts safely.

A certified rigger is trained and certified to handle and move loads. On many jobs that person also holds a trade title—ironworker, millwright, pipe fitter, electrician, carpenter, laborer, and others. NCCCO still treats that person as a rigger for certification purposes. Rigger certification covers synthetic slings , chain slings , wire rope slings , metal mesh slings , and rigging hardware .

What a Certified Rigger Level I Is Authorized to Do

Per NCCCO, a Certified Rigger Level I can perform simple, repetitive rigging tasks when the load weight , center of gravity , rigging , and rigging configuration are provided or known from experience or on-the-job training before the work starts. Level I candidates are expected to demonstrate knowledge of how to:

  • Inspect rigging before use
  • Identify, select, and attach rigging using basic hitch configurations, capacities, and basic knots
  • Recognize associated hazards
  • Use various types of rigging equipment and basic hitches correctly

Exam trap: Level I does not mean “any lift on the job.” If weight or CG must be calculated , if hitch selection depends on unknown loading , or if the lift is unsupervised complex work, that work is outside Level I scope (see Section 1.2).

Written Exam Format

  • Detail Official Level I fact
  • Questions 60 multiple-choice
  • Time limit 60 minutes (not 90)
  • Delivery Online Proctored Testing ( OPT ), Test Center Testing ( TCT ), Event Online Testing ( EOT )
  • Practical Required for initial certification
  • Certification period 5 years after both exams are passed
  • Exam order Written and practical may be taken in either order

Pace yourself: 60 questions in 60 minutes is about one minute per question . Flag hard items and return if time remains. Unofficial study materials sometimes list a 90-minute window— ignore that ; use the official 60-minute limit when planning practice tests.

Written delivery options (OPT / TCT / EOT)

OPT (Online Proctored Testing): Take the exam remotely with a live or automated proctor under NCCCO rules (camera, workspace, ID).

TCT (Test Center Testing): Sit at an approved testing center with on-site proctors.

EOT (Event Online Testing): Employer or training-provider events that deliver the same digital exam under event proctoring rules.

All three deliver the same written exam content. Choose the option that fits your schedule, equipment, and employer arrangements. Schedule through myCCO at https://my.ccocert.org/ .

Practical Exam (Required)

Passing the written exam alone does not create a CCO Rigger Level I credential. You must also pass the Level I Practical Examination , which demonstrates basic rigging competency (pre-use inspection, hitches, connections, and basic knots—exact tasks follow the current practical outline). Treat practical practice as seriously as written study: hands-on skill is scored, not just theory.

Content Domains (Official Outline Weights)

The Level I written exam tests four domains. Approximate weights drive how you allocate study time:

Domain Approx. weight What it emphasizes

Scope of the Rigging Activity ~15% Load path, load characteristics, special handling, unsafe practices, hazards, hazard communication

Technical Knowledge ~13% ASME non-inspection standards (B30.9, B30.10, B30.20, B30.26) and OSHA non-inspection rules (1910.184, 1926.251, 1926.1431)

Inspection ~30% Frequent inspection criteria for slings, hooks, below-the-hook devices, and hardware under ASME and OSHA

Execution of Rigging Activity ~42% Using slings, hardware, below-the-hook devices, tag lines, basic knots, and post-lift secure/disconnect/stow steps

Study priority: Roughly three out of four scored items come from Inspection + Execution (~72% combined). Technical Knowledge and Scope still matter—they set the rules and hazard framing—but do not let them crowd out sling removal criteria, hitch applications, and hardware use.

Domain snapshots (what “know” means on the outline)

Scope (~15%) includes identifying the load’s travel path; verifying weight and attachment points; recognizing special handling needs; spotting unsafe practices (pinch points, need for softeners, load stability, shock load, side load, body positioning, electrical hazards); and communicating hazards.

Technical Knowledge (~13%) expects you to apply the named ASME B30 standards and OSHA sections as non-inspection knowledge—what the rules require for safe use and configuration, not only “look for defects.”

Inspection (~30%) focuses on frequent inspection standards and regulations: when gear is removed from service, what damage looks like, and how tags and criteria apply before use.

Execution (~42%) is the largest domain: chain, wire rope, metal mesh, and synthetic (rope, web, round) slings; shackles, hooks, eyebolts, beam clamps, softeners, jacks, and other hardware; below-the-hook devices; tag lines and basic knots; and securing the load, disconnecting rigging, and stowing gear after the move.

Why Employers Value CCO Rigger Level I

OSHA crane standards expect qualified personnel for certain rigging tasks. CCO certification is a portable, third-party way to document knowledge and skill. Many contractors, industrial plants, and construction sites list CCO Rigger Level I (or higher) in job postings and subcontractor requirements. The credential does not replace employer training, site-specific procedures, or manufacturer instructions—it proves a baseline that those programs can build on.

Common Misconceptions

“Written only is enough.” No—initial certification requires both written and practical within the allowed time frame.

“Level I can figure out any unknown weight on the fly.” Level I assumes weight/CG/configuration are known or provided ; estimation when calculation is required is Level II territory.

“60 questions means 90 minutes.” Official time is 60 minutes for 60 questions.

“Inspection is a small section.” Inspection is about 30% —second only to Execution.

How This Guide Maps to the Exam

Later chapters walk Scope (load path, weight/CG when known, hazards), Technical Knowledge (ASME and OSHA), Inspection (sling and hardware removal criteria), and Execution (hitches, angles, hardware, tag lines, knots). Use domain weights to schedule review: spend the most time on execution and inspection, then close gaps on scope and standards.