Study guide

13.3 Nondestructive Examination (NDE): VT, PT, MT, UT, RT & Discontinuity Evaluation

NCCER Boilermaker Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Assessment, Boilermaker Craft, Safety, Tools & Crew Leadership

1.1 The NCCER Boilermaker Assessments: Format, Content Domains, Scoring & Credentials 1.2 Craft Fundamentals, Professional Roles & Industrial Safety 1.3 Confined Space Entry, Lockout/Tagout (LOTO) & Atmospheric Testing 1.4 Hand, Pneumatic, Electric & Hydraulic Boilermaker Tools 1.5 Crew Leadership, Job Planning, Production Tracking & Jobsite Communication

2 Chapter 2: Metallurgy, Base Materials, Oxyfuel, Air Carbon Arc & Plasma Cutting

2.1 Industrial Boiler Materials, Carbon & Alloy Steels, ASME Material Specs & Markings 2.2 Base Metal Surface Preparation, Joint Beveling & Fit-Up Cleanliness 2.3 Oxyfuel Cutting Principles, Equipment Setup, Torch Angles & Piercing Techniques 2.4 Air Carbon Arc Cutting and Gouging (CAC-A): Electrodes, Current, Air Supply, Technique & Defects 2.5 Plasma Arc Cutting (PAC): Torch Anatomy, Consumables, Gas Selection, Cut Quality & Safety

3 Chapter 3: Boiler Types, Steam Generation, Feedwater & Combustion Systems

3.1 Firetube Boiler Designs, Circulation Patterns & Operating Principles 3.2 Watertube Boiler Configurations, Natural & Forced Circulation, Drum Internals 3.3 Superheaters, Reheaters, Economizers & Air Heaters 3.4 Feedwater Systems, Deaerators, Condensate Return & Boiler Water Treatment 3.5 Combustion Systems: Burners, Stokers, Pulverizers, Fans & Draft Control

4 Chapter 4: Boiler Pressure & Nonpressure Components

4.1 Steam Drums, Mud Drums, Headers & Waterwalls 4.2 Nonpressure Components: Casing, Breeching, Baffles, Buckstays & Expansion Joints 4.3 Boiler Auxiliaries: Soot Blowers, Safety Valves, Gage Glasses & Blowdown Systems

5 Chapter 5: Valves, Gaskets, Fasteners, Anchors & Pipe Support Systems

5.1 Industrial Valve Types, Markings, Operation & Ratings 5.2 Gasket Materials, Flange Facings, Bolt Torque Sequences & Joint Assembly 5.3 Gasket Layout, Cutting & Fitting for Field-Made Gaskets 5.4 Fasteners, Anchors & Threaded Connection Hardware 5.5 Pipe Hangers, Supports, Rigid Restraints & Spring Can Installation/Adjustment

6 Chapter 6: Blueprint Reading, Welding Symbols & Construction Drawings

6.1 AWS Welding Symbols, Joint Geometry, Contours & NDE Designators 6.2 Piping Schematics, P&IDs, Isometric Drawings & Spool Sheets 6.3 Pressure Vessel General Arrangement, Detail Sheets, Coordinates & Elevations

7 Chapter 7: Trade Mathematics & Pipe Layout Calculations

7.1 Boilermaker Mechanical Trade Math: Offsets, Rolling Offsets & Travel Calculations 7.2 Vessel Volume, Surface Area, Circumference & Head Layout Computations 7.3 Mitered Turns, Segment Layout, Cutbacks & Branch Connections

8 Chapter 8: Pipe Fabrication - Socket Weld, Butt Weld, Threaded, Grooved & Spool Work

8.1 Pipe Materials, Nominal Pipe Size, Wall Schedules & Fitting Standards 8.2 Socket Weld Pipe Fabrication: The 1/16 in. Gap, Fillet Sizing & Cut Lengths 8.3 Butt Weld Pipe Fabrication: End Preparation, Alignment, Fit-Up & Cut Lengths 8.4 Pipe Layout Tools, Wrap-Arounds, Flange Squaring & Fabrication Tolerances 8.5 Threaded and Grooved Pipe Joining Systems 8.6 Spool Fabrication Workflow, Shop Versus Field Welds & Advanced Pipe Fabrication

9 Chapter 9: Tube Fabrication, Bending & Rolling

9.1 Boiler Tube Removal, Inspection, Wall Thinning & Replacement Criteria 9.2 Tube Preparation, Bending Radii, Ovality & Alignment Tolerances 9.3 Tube Expanding Mechanics, Rolling Torque Calculations, Wall Reduction & Flaring/Beading

10 Chapter 10: Welding Processes, Preheat & Stress Relieving

10.1 SMAW, GTAW & FCAW Welding Processes in Pressure Vessel Applications 10.2 Electrode Selection, Storage, Baking & AWS Filler Metal Classifications 10.3 Preheating Standards, Interpass Temperature Control & Post-Weld Heat Treatment (PWHT)

11 Chapter 11: Rigging Equipment, Hardware & Crane Operations

11.1 Rigging Hardware: Slings, Shackles, Eye Bolts & Inspection Criteria 11.2 Rigging Math: Sling Angles, Tension Calculations & Center of Gravity 11.3 Crane Signals, Load Charts, Boom Angle Deratings & Critical Lift Planning

12 Chapter 12: Towers, Heat Exchangers & Refractory/BRIL Systems

12.1 Shell-and-Tube Heat Exchangers: Bundles, Baffles & Floating Heads 12.2 Fractionation Towers, Trays, Downcomers, Packing & Vessel Hardware 12.3 Refractory Materials (Brick, Castable, Ceramic Fiber), Anchoring & Lagging (BRIL)

13 Chapter 13: ASME Codes, Quality Assurance, NDE, Pressure Testing & System Cleaning

13.1 ASME Boiler & Pressure Vessel Code (Sections I, VIII, IX) & NBIC Standards 13.2 Quality Control, Material Test Reports (MTRs), Weld Mapping & Traceability 13.3 Nondestructive Examination (NDE): VT, PT, MT, UT, RT & Discontinuity Evaluation 13.4 Hydrostatic and Pneumatic Testing Procedures, Safety Precautions & MAWP Validation 13.5 System Flushing, Chemical Cleaning, Boil-Out, Steam Blows & Service Leak Testing

13.3 Nondestructive Examination (NDE): VT, PT, MT, UT, RT & Discontinuity Evaluation

Key Takeaways Explain This Topic AI

Visual Testing (VT) is the primary NDE method, requiring a minimum surface illumination of 100 foot-candles (1076 lux), a viewing angle not less than 30°, and eye distance within 24 inches to assess weld profiles, undercut, reinforcement, and surface discontinuities.

Liquid Penetrant Testing (PT) detects surface-breaking flaws via capillary action across non-porous materials, whereas Magnetic Particle Testing (MT) detects surface and near-subsurface flaws in ferromagnetic metals using electromagnetic yokes (AC for surface, DC for subsurface).

Ultrasonic Testing (UT) uses high-frequency acoustic waves (1–10 MHz) with straight beam (0°) for thickness/lamination checks and angle beam (45°, 60°, 70°) or Phased Array (PAUT) for volumetric weld flaw detection.

Radiographic Testing (RT) evaluates internal volumetric integrity using X-rays or gamma-ray isotopes (Ir-192, Co-60), verified by Image Quality Indicators (IQIs/penetrameters) and evaluated against ASME Section VIII Div 1 UW-51 / UW-52 acceptance standards.

Last updated: August 2026

12.3 Nondestructive Examination (NDE): VT, PT, MT, UT, RT & Discontinuity Evaluation

Core Trade Concept: Nondestructive Examination (NDE) comprises testing and inspection methods that evaluate the structural integrity, geometry, and internal sound quality of materials and welds without impairing their future usefulness . In boiler and pressure vessel construction, ASME BPVC Section V establishes procedural standards, while Section I (PW-51/52) and Section VIII (UW-51/52) define rigorous acceptance criteria.

1. Visual Testing (VT) & Weld Profile Gauging

Visual Testing (VT) is the most fundamental, universal, and cost-effective NDE method. It is performed prior to, during, and after all welding operations. DIRECT VISUAL EXAMINATION CRITERIA

  • [ Inspector's Eye ]
  • \ /
  • \ / Viewing Angle >= 30°
  • Distance \ /
  • <= 24" \ /
  • V
  • +---------------------------------+
  • | Weld Bead Under Inspection |
  • +---------------------------------+
  • | Illumination >= 100 Foot-Candles|
  • | (1,076 Lux) |
  • +---------------------------------+
  • ASME Section V Article 9 Mandatory Visual Standards

Direct Visual Examination: Access must permit placing the eye within 24 inches 24\text{ inches} 24 inches ( 600 mm 600\text{ mm} 600 mm ) of the surface at an angle not less than 30 ∘ 30^\circ 3 0 ∘ to the plane of the inspection surface.

Lighting / Illumination: Minimum light intensity at the inspection surface must be 100 foot-candles 100\text{ foot-candles} 100 foot-candles ( 1,076 lux 1{,}076\text{ lux} 1 , 076 lux ) , verified with a calibrated light meter.

Remote Visual Examination (RVE): Utilizes optical borescopes, fiberscopes, pan-tilt-zoom cameras, or pipe crawlers to inspect inaccessible boiler tube internals, header bore ligaments, and downcomer nozzles.

Weld Profile Measurement & Gauges STANDARD WELD GAUGES

  • FILLET WELD GAUGE BRIDGE CAM GAUGE HI-LO ALIGNMENT GAUGE
  • +-------------+ +--------------+ +-----------------+
  • | /-\ /-\ | | |\ /| | | [ Internal ] |
  • | | | | | | | | \/ | --O | | [ Mismatch ] |
  • +-------------+ +--------------+ +-----------------+
  • Measures Leg Size & Measures Undercut, Measures Internal Pipe
  • Throat Dimension Reinforcement & Angle Hi-Lo Misalignment
  • Key Visual Weld Discontinuities & Code Limits

Undercut: A groove melted into the base metal adjacent to the weld toe or root and left unfilled. Under ASME Section VIII Div 1, undercut cannot exceed 1 / 32 in. 1/32\text{ in.} 1/32 in. ( 0.8 mm 0.8\text{ mm} 0.8 mm ) or 10 % 10\% 10% of nominal wall thickness, whichever is less, and cannot encroach on minimum design thickness.

Overlap (Cold Lap): Weld metal protruding beyond the weld toe without fusion to the base metal. 100 % 100\% 100% rejectable under all ASME sections.

Excess Weld Reinforcement: Crown height exceeding code limits creates excessive stress concentration at the weld toes. For plate thickness 1 / 2 in. to 1 in. 1/2\text{ in. to }1\text{ in.} 1/2 in. to 1 in. , maximum reinforcement is typically 3 / 16 in. 3/16\text{ in.} 3/16 in. ( 5 mm 5\text{ mm} 5 mm ).

Cracks & Lack of Fusion: Any crack (longitudinal, transverse, crater crack, toe crack) or incomplete side-wall fusion is unconditionally rejectable .

2. Liquid Penetrant Testing (PT)

Liquid Penetrant Testing (PT) utilizes capillary action to draw low-viscosity liquid dye into clean, surface-breaking discontinuities in non-porous materials. THE LIQUID PENETRANT PROCESS

  • 1. CLEAN SURFACE 2. APPLY PENETRANT 3. REMOVE EXCESS
  • +-------------+ +~~~~~~~~~~~~~+ +-------------+
  • | | Crack | | | |~Dye~| | | |~Dye~| |
  • +---+-------+-+ +---+-----+- -+ +---+-------+-+
  • (Dwell: 5-30 min) (Wipe Clean; No Spray)
  • 4. APPLY DEVELOPER 5. INSPECT BLEED-OUT 6. POST-CLEAN
  • +=============+ +=============+ +-------------+
  • | |*Dye*| | | |*RED*| | | |
  • +---+-------+-+ +---+-----+---+ +-------------+
  • (Thin White Film) (Capillary Extraction) (Remove Chem Residue)
  • PT Classification & Standard Method C (Solvent Removable)

Under ASME Section V, Article 6 , penetrants are categorized into:

Type I: Fluorescent penetrants (viewed under ultraviolet/black light UV-A ≥ 1,000 μ W/cm 2 \ge 1{,}000\ \mu\text{W/cm}^2 ≥ 1 , 000 μ W/cm 2 in darkened booths < 2 fc < 2\text{ fc} < 2 fc ambient light).

Type II: Visible dye penetrants (vivid red dye inspected under natural white light ≥ 100 fc \ge 100\text{ fc} ≥ 100 fc ).

Method C (Solvent Removable): The standard field method used by boilermakers on boiler tubes, nozzles, and structural attachments.

Step-by-Step Field Execution Protocol

Pre-Cleaning: Degrease and clean the test surface using solvent cleaner and lint-free cloths. The surface must be completely dry for at least 1 minute before penetrant application.

Penetrant Application & Dwell Time: Spray or brush visible red penetrant over the weld and adjacent 1 inch 1\text{ inch} 1 inch of base metal. Maintain a dwell time of 5 to 30 minutes 5\text{ to }30\text{ minutes} 5 to 30 minutes (governed by material type and expected flaw size; minimum temperature 40 ∘ F to 125 ∘ F 40^\circ\text{F}\text{ to }125^\circ\text{F} 4 0 ∘ F to 12 5 ∘ F ).

Excess Penetrant Removal: Wipe off surface penetrant using dry, lint-free cloths until minimal red remains, followed by a cloth lightly moistened with solvent cleaner.

Critical Rule: NEVER spray solvent cleaner directly onto the weld surface , as it will flush penetrant out of cracks and invalidate the test.

Developer Application: Shake aerosol can of non-aqueous wet developer (white chalky suspension) and apply a thin, uniform, translucent white dusting . Applying thick developer masks small crack indications.

Evaluation Window: Observe the developer continuously during drying. Final interpretation must be completed between 10 and 60 minutes 10\text{ and }60\text{ minutes} 10 and 60 minutes after developer application as penetrant bleeds out via capillary action.

3. Magnetic Particle Testing (MT)

Magnetic Particle Testing (MT) is used to detect surface and slightly subsurface discontinuities in ferromagnetic materials (carbon steel and low-alloy steels). It CANNOT be used on non-magnetic metals such as 300-series austenitic stainless steel, aluminum, brass, or titanium. MAGNETIC FLUX LEAKAGE PRINCIPLE

  • Electromagnetic Yoke
  • [ Pole ] [ Pole ]
  • | |
  • +-----------------------v--------------v-----------------------+
  • | ==== Magnetic Flux Lines ====> |
  • | |
  • | \ Flux Leakage / |
  • | \ (N) (S) / <- Iron Particles |
  • | -------+-----------+------- Attracted to Pole|
  • | | Crack | |
  • | -------+-----------+------- |
  • +--------------------------------------------------------------+
  • Principles of Operation

When a ferromagnetic material is magnetized, magnetic lines of force (flux) travel through the metal. A crack or seam perpendicular to the flux path interrupts the magnetic field, forcing magnetic flux to leak out into the air ( Magnetic Flux Leakage - MFL ). Fine iron oxide particles dusted over the surface are attracted to the leakage field, forming a sharp, visible indication.

AC Yoke vs. DC Yoke & Equipment Calibration

Parameter Alternating Current (AC) Yoke Direct Current (DC) / HWDC Yoke

Magnetization Mechanism Skin effect concentrates magnetic field at the immediate surface. Deep magnetic field penetration into metal cross-section.

Flaw Sensitivity Exceptional for sharp surface-breaking cracks (fatigue, toe cracks, hydrogen cracks). Capable of detecting subsurface discontinuities (lack of fusion, slag inclusions up to 1 / 4 in. 1/4\text{ in.} 1/4 in. deep).

Dead-Weight Lift Test Must lift a certified 10 lb 10\text{ lb} 10 lb ( 4.5 kg 4.5\text{ kg} 4.5 kg ) carbon steel weight at maximum pole spacing. Must lift a certified 40 lb 40\text{ lb} 40 lb ( 18.1 kg 18.1\text{ kg} 18.1 kg ) carbon steel weight at maximum pole spacing.

Demagnetization Automatically demagnetizes part as yoke is backed away with current active. Leaves strong residual magnetic field; requires dedicated AC coil demagnetization.

Testing Techniques

Dry Powder vs. Wet Fluorescent: Dry magnetic particles (red, gray, or yellow iron oxide) applied with a light puff bulb are ideal for rough weld caps in field environments. Wet fluorescent particles suspended in light distillate oil provide maximum sensitivity for micro-cracks in polished shop environments.

Continuous Method: Magnetic particles are applied to the weld surface while electrical magnetizing current is actively flowing through the yoke. This is the mandatory standard for high-sensitivity inspections.

Two-Directional Inspection: Because cracks parallel to flux lines produce no leakage field, the yoke must be oriented in two mutually perpendicular ( 90 ∘ 90^\circ 9 0 ∘ ) directions to detect cracks running longitudinally and transversely.

4. Ultrasonic Testing (UT) & Advanced Phased Array

Ultrasonic Testing (UT) introduces high-frequency sound waves ( 1 to 10 MHz 1\text{ to }10\text{ MHz} 1 to 10 MHz ) into a material to measure thickness and detect internal volumetric and planar weld defects. STRAIGHT BEAM VS. ANGLE BEAM UT

  • STRAIGHT BEAM (0°) ANGLE BEAM (45°, 60°, 70°)
  • +--------------------+ +--------------------------------+
  • | [Transducer / 0°] | | [Transducer on Lucite Wedge] |
  • +--------------------+ +--------------------------------+
  • | || Acoustic Wave | | \ Shear Wave |
  • | || (Longitudinal) | | \ (Transverse) /\ |
  • | vv | | \ / \ |
  • | [ Lamination ] ===>| Echo | \ / \ Echo |
  • | || | | v v v |
  • +--------------------+ +------------------+-------------+
  • | Backwall Echo | | Weld Root | Weld Cap |
  • +--------------------+ +------------------+-------------+
  • Wave Propagation & Transducer Types

Couplant: A viscous liquid or gel (cellulose gel, propylene glycol, light machine oil) applied between the piezoelectric transducer and metal surface to eliminate air gaps, which would otherwise reflect 100 % 100\% 100% of acoustic energy.

Straight Beam ( 0 ∘ 0^\circ 0 ∘ Longitudinal Wave): Sound travels straight down perpendicular to the entry surface. Used for precision wall thickness measurement (corrosion/erosion surveys) and detecting parent plate laminations or inclusions prior to cutting nozzle holes.

Angle Beam ( 45 ∘ , 60 ∘ , 70 ∘ 45^\circ, 60^\circ, 70^\circ 4 5 ∘ , 6 0 ∘ , 7 0 ∘ Shear Wave): Transducers mounted on angled Lucite wedges refract sound at specific angles per Snell's Law. Sound bounces between the top and bottom plates (V-path / skip distance), striking planar weld flaws (sidewall lack of fusion, cracks, incomplete penetration) at right angles to generate high-amplitude reflection echoes.

Advanced UT: PAUT & TOFD

Phased Array Ultrasonic Testing (PAUT): Employs probes containing an array of 16 to 128 miniature piezoelectric elements. By pulsing individual elements with precise microsecond time delays, the sound beam can be steered across multiple angles ( 40 ∘ to 70 ∘ 40^\circ\text{ to }70^\circ 4 0 ∘ to 7 0 ∘ ) and focused dynamically at varying depths. PAUT generates color-coded cross-sectional ( S-scans ) and plan-view ( C-scans ) of the entire weld volume, replacing radiographic inspection in many modern codes.

Time of Flight Diffraction (TOFD): Uses a pair of angle-beam probes (one transmitter, one receiver) placed on opposite sides of the weld seam. TOFD measures the transit time of acoustic waves diffracted from the top and bottom tips of a crack, providing precise measurement of vertical through-wall crack depth.

5. Radiographic Testing (RT) & Radiation Safety

Radiographic Testing (RT) uses penetrating electromagnetic radiation ( X-rays or gamma rays ) to capture a two-dimensional shadow image of a weld's internal structure on photographic film or digital detector arrays (CR/DR). GAMMA RADIOGRAPHY SETUP & IQI

  • [ Sealed Isotope Source (Ir-192) ]
  • |
  • | Gamma Radiation Rays
  • v
  • +--------------------------+
  • | [IQI] WELD SEAM |
  • +--------------------------+
  • | Film Cassette / Detector |
  • +--------------------------+
  • Radiation Sources: X-Ray Tubes vs. Gamma Radioisotopes

X-Ray Generators: Electrically powered vacuum tubes that produce X-rays by accelerating electrons into a tungsten target. Voltage ( 150 to 450 kV 150\text{ to }450\text{ kV} 150 to 450 kV ) can be adjusted to match plate thickness, and radiation stops instantly when electrical power is switched off.

Gamma-Ray Radioisotopes: Encapsulated radioactive pellets stored inside heavy depleted-uranium exposure devices ("cameras"). They emit radiation continuously through natural decay:

Iridium-192 ( 192 Ir ^{192}\text{Ir} 192 Ir ): Half-life of 73.8 days 73.8\text{ days} 73.8 days ; standard isotope for steel thicknesses between 0.25 in. and 2.5 in. 0.25\text{ in. and }2.5\text{ in.} 0.25 in. and 2.5 in. .

Cobalt-60 ( 60 Co ^{60}\text{Co} 60 Co ): Half-life of 5.27 years 5.27\text{ years} 5.27 years ; high-energy isotope used for heavy-wall steel between 1.5 in. and 7.0 in. 1.5\text{ in. and }7.0\text{ in.} 1.5 in. and 7.0 in. .

Selenium-75 ( 75 Se ^{75}\text{Se} 75 Se ): Half-life of 119.8 days 119.8\text{ days} 119.8 days ; lower energy, ideal for thin-wall boiler tubing ( 0.1 to 1.0 in. 0.1\text{ to }1.0\text{ in.} 0.1 to 1.0 in. ).

Image Quality Indicators (IQIs / Penetrameters)

Under ASME Section V, Article 2 , every radiographic exposure must include an Image Quality Indicator (IQI) placed on the source side of the weld to prove radiographic image quality, sensitivity, and contrast. HOLE-TYPE VS. WIRE-TYPE IQI

  • HOLE-TYPE PLAQUE (ASME) ASTM E747 WIRE-TYPE
  • +-------------------------+ +-------------------------+
  • | SA-516-70 [20] | | ASTM 1A |
  • | O o . | | |||||||| |
  • | 4T 2T 1T | | 6 Wires (Graduated Dia.)|
  • +-------------------------+ +-------------------------+
  • (Plaque Thickness = 2% T) (Essential Wire Must Appear)

Hole-Type (Plaque) IQIs: Rectangular metal strips with thickness equal to 2 % 2\% 2% of nominal material thickness ( T T T ), containing three drilled holes with diameters 1 T 1T 1 T , 2 T 2T 2 T , and 4 T 4T 4 T . Standard Code sensitivity is 2-2T ( 2 % 2\% 2% plaque thickness, 2 T 2T 2 T diameter hole visible on film).

Wire-Type IQIs (ASTM E747): Plastic envelopes containing a set of 6 graduated wires of increasing diameter. The essential wire corresponding to the single-wall thickness must be clearly discernible across the weld image.

Radiation Safety & The Inverse Square Law

Radiation exposure is managed using three fundamental principles: Time , Distance , and Shielding ( ALARA — As Low As Reasonably Achievable). THE INVERSE SQUARE LAW

Radiation Intensity Drops with Square of Distance

  • D = 10 ft D = 20 ft (Doubled Distance)
  • +---------+ +---------+
  • | 100 mR | | 25 mR | (Intensity Drops to 1/4!)

+---------+ +---------+ Mathematical Formula: I 1 ⋅ D 1 2 = I 2 ⋅ D 2 2 ⟹ I 2 = I 1 ⋅ ( D 1 D 2 ) 2 \text{Mathematical Formula: } I_1 \cdot D_1^2 = I_2 \cdot D_2^2 \quad \implies \quad I_2 = I_1 \cdot \left(\frac{D_1}{D_2}\right)^2 Mathematical Formula: I 1 ​ ⋅ D 1 2 ​ = I 2 ​ ⋅ D 2 2 ​ ⟹ I 2 ​ = I 1 ​ ⋅ ( D 2 ​ D 1 ​ ​ ) 2

Exclusion Boundaries: Barricades with yellow-and-magenta radiation ropes and flashing warning signs ("CAUTION: RADIATION AREA") must be established where radiation levels exceed 2.0 mR/hr 2.0\text{ mR/hr} 2.0 mR/hr ( 0.02 mSv/hr 0.02\text{ mSv/hr} 0.02 mSv/hr ) . Personnel must wear calibrated survey meters , direct-reading pocket dosimeters , and thermoluminescent dosimeters (TLD / OSLD badges) .

6. Flaw Classification & ASME UW-51 / UW-52 Acceptance Standards

ASME Section VIII Div 1 distinguishes between planar discontinuities (which create sharp crack-like stress risers) and volumetric discontinuities (which create smooth spherical cavities). PLANAR VS. VOLUMETRIC DISCONTINUITIES

  • PLANAR FLAW (UNACCEPTABLE) VOLUMETRIC FLAW (CHART-LIMITED)
  • +-----------------------------+ +-----------------------------+
  • | / | | ( ) |
  • | / CRACK | | ( Porosity ) |
  • | / | | ( ) |
  • +-----------------------------+ +-----------------------------+
  • (Sharp Tips; Severe Stress (Spherical Cavity; Mild Stress
  • Concentrations => 100% REJECT) Concentration => Chart Acceptable)
  • ASME Section VIII Div 1 Radiographic Acceptance Standards

Discontinuity Type UW-51 Full Radiography Standard UW-52 Spot Radiography Standard

Cracks, Lack of Fusion, & Incomplete Penetration 100 % 100\% 100% REJECTABLE. Zero tolerance regardless of length. 100 % 100\% 100% REJECTABLE. Zero tolerance for cracks/LOF. Minor IP acceptable only within narrow limits.

Elongated Slag Inclusions Acceptable if length ≤ 1 / 4 in. \le 1/4\text{ in.} ≤ 1/4 in. for t ≤ 3 / 4 in. t \le 3/4\text{ in.} t ≤ 3/4 in. , or ≤ 1 / 3 t \le 1/3 t ≤ 1/3 t for 3 / 4 in. < t ≤ 2.25 in. 3/4\text{ in.} < t \le 2.25\text{ in.} 3/4 in. < t ≤ 2.25 in. Acceptable if length ≤ 2 / 3 t \le 2/3 t ≤ 2/3 t (up to maximum 3 / 4 in. 3/4\text{ in.} 3/4 in. ).

Porosity (Gas Cavities) Must comply with Appendix 4 Porosity Charts (limits aggregate area and cluster density). Porosity is NOT a factor in spot RT (unless clustered into severe pipe/wormhole shapes).