Study guide

3.5 Combustion Systems: Burners, Stokers, Pulverizers, Fans & Draft Control

NCCER Boilermaker Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Assessment, Boilermaker Craft, Safety, Tools & Crew Leadership

1.1 The NCCER Boilermaker Assessments: Format, Content Domains, Scoring & Credentials 1.2 Craft Fundamentals, Professional Roles & Industrial Safety 1.3 Confined Space Entry, Lockout/Tagout (LOTO) & Atmospheric Testing 1.4 Hand, Pneumatic, Electric & Hydraulic Boilermaker Tools 1.5 Crew Leadership, Job Planning, Production Tracking & Jobsite Communication

2 Chapter 2: Metallurgy, Base Materials, Oxyfuel, Air Carbon Arc & Plasma Cutting

2.1 Industrial Boiler Materials, Carbon & Alloy Steels, ASME Material Specs & Markings 2.2 Base Metal Surface Preparation, Joint Beveling & Fit-Up Cleanliness 2.3 Oxyfuel Cutting Principles, Equipment Setup, Torch Angles & Piercing Techniques 2.4 Air Carbon Arc Cutting and Gouging (CAC-A): Electrodes, Current, Air Supply, Technique & Defects 2.5 Plasma Arc Cutting (PAC): Torch Anatomy, Consumables, Gas Selection, Cut Quality & Safety

3 Chapter 3: Boiler Types, Steam Generation, Feedwater & Combustion Systems

3.1 Firetube Boiler Designs, Circulation Patterns & Operating Principles 3.2 Watertube Boiler Configurations, Natural & Forced Circulation, Drum Internals 3.3 Superheaters, Reheaters, Economizers & Air Heaters 3.4 Feedwater Systems, Deaerators, Condensate Return & Boiler Water Treatment 3.5 Combustion Systems: Burners, Stokers, Pulverizers, Fans & Draft Control

4 Chapter 4: Boiler Pressure & Nonpressure Components

4.1 Steam Drums, Mud Drums, Headers & Waterwalls 4.2 Nonpressure Components: Casing, Breeching, Baffles, Buckstays & Expansion Joints 4.3 Boiler Auxiliaries: Soot Blowers, Safety Valves, Gage Glasses & Blowdown Systems

5 Chapter 5: Valves, Gaskets, Fasteners, Anchors & Pipe Support Systems

5.1 Industrial Valve Types, Markings, Operation & Ratings 5.2 Gasket Materials, Flange Facings, Bolt Torque Sequences & Joint Assembly 5.3 Gasket Layout, Cutting & Fitting for Field-Made Gaskets 5.4 Fasteners, Anchors & Threaded Connection Hardware 5.5 Pipe Hangers, Supports, Rigid Restraints & Spring Can Installation/Adjustment

6 Chapter 6: Blueprint Reading, Welding Symbols & Construction Drawings

6.1 AWS Welding Symbols, Joint Geometry, Contours & NDE Designators 6.2 Piping Schematics, P&IDs, Isometric Drawings & Spool Sheets 6.3 Pressure Vessel General Arrangement, Detail Sheets, Coordinates & Elevations

7 Chapter 7: Trade Mathematics & Pipe Layout Calculations

7.1 Boilermaker Mechanical Trade Math: Offsets, Rolling Offsets & Travel Calculations 7.2 Vessel Volume, Surface Area, Circumference & Head Layout Computations 7.3 Mitered Turns, Segment Layout, Cutbacks & Branch Connections

8 Chapter 8: Pipe Fabrication - Socket Weld, Butt Weld, Threaded, Grooved & Spool Work

8.1 Pipe Materials, Nominal Pipe Size, Wall Schedules & Fitting Standards 8.2 Socket Weld Pipe Fabrication: The 1/16 in. Gap, Fillet Sizing & Cut Lengths 8.3 Butt Weld Pipe Fabrication: End Preparation, Alignment, Fit-Up & Cut Lengths 8.4 Pipe Layout Tools, Wrap-Arounds, Flange Squaring & Fabrication Tolerances 8.5 Threaded and Grooved Pipe Joining Systems 8.6 Spool Fabrication Workflow, Shop Versus Field Welds & Advanced Pipe Fabrication

9 Chapter 9: Tube Fabrication, Bending & Rolling

9.1 Boiler Tube Removal, Inspection, Wall Thinning & Replacement Criteria 9.2 Tube Preparation, Bending Radii, Ovality & Alignment Tolerances 9.3 Tube Expanding Mechanics, Rolling Torque Calculations, Wall Reduction & Flaring/Beading

10 Chapter 10: Welding Processes, Preheat & Stress Relieving

10.1 SMAW, GTAW & FCAW Welding Processes in Pressure Vessel Applications 10.2 Electrode Selection, Storage, Baking & AWS Filler Metal Classifications 10.3 Preheating Standards, Interpass Temperature Control & Post-Weld Heat Treatment (PWHT)

11 Chapter 11: Rigging Equipment, Hardware & Crane Operations

11.1 Rigging Hardware: Slings, Shackles, Eye Bolts & Inspection Criteria 11.2 Rigging Math: Sling Angles, Tension Calculations & Center of Gravity 11.3 Crane Signals, Load Charts, Boom Angle Deratings & Critical Lift Planning

12 Chapter 12: Towers, Heat Exchangers & Refractory/BRIL Systems

12.1 Shell-and-Tube Heat Exchangers: Bundles, Baffles & Floating Heads 12.2 Fractionation Towers, Trays, Downcomers, Packing & Vessel Hardware 12.3 Refractory Materials (Brick, Castable, Ceramic Fiber), Anchoring & Lagging (BRIL)

13 Chapter 13: ASME Codes, Quality Assurance, NDE, Pressure Testing & System Cleaning

13.1 ASME Boiler & Pressure Vessel Code (Sections I, VIII, IX) & NBIC Standards 13.2 Quality Control, Material Test Reports (MTRs), Weld Mapping & Traceability 13.3 Nondestructive Examination (NDE): VT, PT, MT, UT, RT & Discontinuity Evaluation 13.4 Hydrostatic and Pneumatic Testing Procedures, Safety Precautions & MAWP Validation 13.5 System Flushing, Chemical Cleaning, Boil-Out, Steam Blows & Service Leak Testing

3.5 Combustion Systems: Burners, Stokers, Pulverizers, Fans & Draft Control

Key Takeaways Explain This Topic AI

Balanced-draft boilers are held slightly below atmospheric pressure in the furnace so casing leaks draw air inward instead of blowing flue gas and ash outward.

Furnace implosion is the hazard unique to balanced draft, which is why buckstay systems are designed for transient negative pressures far beyond normal draft.

NFPA 85 requires the furnace and gas passes to be purged with at least five volume changes of air before any igniter is permitted.

Pulverized coal fineness targets of roughly 70 to 75 percent through 200 mesh keep the flame short; coarse coal burns late and slags the superheater.

Fuel oil must be atomized — by steam, air, mechanical pressure or a rotary cup — before it will burn, and heavy oil must also be heated to reach tip viscosity.

Last updated: August 2026

Combustion Systems: Burners, Stokers, Pulverizers, Fans & Draft Control

Core Trade Concept: Everything on the fire side of a boiler exists to deliver fuel and air to the furnace in the right proportion, at the right place, and to move the products of combustion out again. Boilermakers build and repair the hardware that does it — windboxes, burner throats, mill housings, ductwork, dampers and fan casings — and they open it all up during outages. Knowing how the system is supposed to run tells you what the damage you are looking at means.

1. The Combustion Requirement

Complete combustion needs three things in balance: fuel, oxygen, and ignition temperature , with enough turbulence, time and temperature (the "three Ts") for the reaction to finish before the gas leaves the furnace.

Excess air is supplied above the theoretical (stoichiometric) requirement because mixing is never perfect. Too little and you get carbon monoxide, soot and unburned fuel — a fuel-rich furnace is also an explosion hazard. Too much and you carry heat straight up the stack and raise NOx.

Excess air is monitored as oxygen in the flue gas , trimmed lower on clean gaseous fuels and higher on solid fuels because solid-fuel mixing is far worse.

  • 2. Fuel-Firing Equipment
  • Oil and gas burners

A register burner admits combustion air through adjustable vanes around a central fuel gun, imparting swirl that anchors and shapes the flame.

Oil must be atomized before it will burn: steam atomizing , air atomizing , mechanical (pressure) atomizing , and rotary cup designs. Heavy fuel oil must additionally be heated to reach the required viscosity at the tip.

Low-NOx burners stage the air and fuel to lower peak flame temperature; staging lengthens the flame, which is why replacing burners frequently drives burner throat refractory and waterwall changes — a boilermaker scope item.

The windbox distributes air to the burner registers; the burner throat is a refractory-lined transition into the furnace, and its condition governs flame shape.

Solid fuel: stokers

Stoker Operation

Traveling grate (chain grate) A continuous grate belt carries a fuel bed slowly through the furnace; ash discharges at the far end

Spreader stoker Fuel is thrown into the furnace so fines burn in suspension and coarse fuel burns on the grate; fast load response

  • Underfeed Fuel is pushed up into the bed from below by a ram or screw
  • Solid fuel: pulverized coal

A pulverizer (mill) — bowl mill, ball-and-race, or ball tube design — grinds coal to a powder. Primary air both dries the coal in the mill and transports it through the coal pipes to the burners.

A classifier at the mill outlet returns oversize particles for regrinding. Typical fineness targets are roughly 70–75% passing 200 mesh with very little retained on 50 mesh ; coarse coal burns late, lengthening the flame into the superheater and causing slagging and tube erosion.

Mill maintenance — grinding rolls, bull rings, classifier vanes and journal assemblies — is heavy boilermaker outage work.

3. Fans and Draft Systems

  • Fan Job
  • Forced draft (FD) Pushes combustion air through the air heater and windbox into the furnace

Induced draft (ID) Pulls flue gas from the furnace through the convection passes, air heater, precipitator and out the stack

Primary air (PA) On pulverized-coal units, supplies high-pressure air to dry and transport coal from the mills DRAFT ARRANGEMENTS

  • NATURAL FORCED (pressurized) BALANCED
  • stack effect FD fan only FD + ID fans
  • only furnace ABOVE furnace held slightly
  • atmospheric BELOW atmospheric
  • (gas-tight casing (leaks pull air IN,
  • is mandatory) not gas out)

A balanced-draft unit is held slightly negative in the furnace — commonly on the order of a few tenths of an inch of water column — so any casing leak draws air inward rather than blowing hot flue gas and ash into the boiler house.

Furnace implosion is the hazard specific to balanced draft. A rapid loss of firing with the ID fan still pulling can collapse the furnace inward, which is why buckstay systems (Section 4.2) are designed to a transient negative pressure far beyond normal operating draft, and why NFPA 85 requires implosion protection interlocks.

Fan control is by inlet vane, variable-speed drive, or outlet damper; outlet damper control is the least efficient because it throttles against the fan.

4. Burner Management and Furnace Purge

Boilermakers do not operate the burner management system (BMS), but they work inside the furnace it protects, and the interlocks are what stand between them and a fuel-air explosion.

NFPA 85, Boiler and Combustion Systems Hazards Code , governs furnace purge, flame supervision, trips and fuel-valve proving.

Purge before every light-off: the furnace and gas passes must be swept with at least five volume changes of air before an igniter is permitted, so that any accumulated fuel is removed.

Flame scanners supervise each burner; loss of flame with fuel admitted is a master fuel trip.

Never trust the BMS alone for entry. Furnace or duct entry requires the full lockout/tagout and blinding regime from Section 1.3 — positive isolation of every fuel line, not just a closed automatic valve.

5. What Goes Wrong, and What the Boilermaker Repairs

Symptom found on outage Cause Boilermaker scope

Slagged, bridged superheater; eroded tubes in the upper furnace Coarse coal fineness or a long, late-burning flame Tube shields, superheater element replacement, mill overhaul

Cracked, spalled burner throat refractory Thermal cycling, flame impingement Refractory demolition and reinstall (Section 12.3)

Warped, holed windbox partition plates Overheating from poor air distribution Plate replacement and re-welding

Duct plate erosion downstream of a turning vane Ash-laden gas at high velocity Wear plate installation, vane repair

Fan rotor imbalance, cracked blade tips Ash erosion and deposit build-up Blade and liner replacement, rebalancing

Air heater basket plugging and cold-end corrosion Sulfuric acid dewpoint corrosion (Section 3.3) Basket replacement, seal setting

6. Realistic Trade Scenario: Restoring Furnace Draft After a Casing Repair

A balanced-draft industrial boiler is running with visible flue gas puffing out of the observation doors, and the ID fan is at maximum vane position while furnace pressure still drifts positive.

Investigation during the outage finds the cause is on the boilermaker's side of the fence:

Casing leakage. A prior repair patched skin casing with unsealed lap joints and left three unsealed penetrations where sootblower wall boxes were relocated. Air in-leakage through those openings loads the ID fan with cold tramp air it must move alongside the real flue gas.

Expansion joint failure. A fabric expansion joint in the ID inlet duct has torn, admitting more tramp air ahead of the fan.

Consequence. Excess air rises without any fuel benefit, ID fan capacity is consumed by air the burners never saw, and furnace pressure control loses margin.

The repair scope is straightforward boilermaker work — seal-weld the casing laps, install proper wall box seal plates, replace the fabric joint and remove its shipping restraints (Section 4.2) — and it restores draft control without touching a single control setting.