Study guide
11.1 Rigging Hardware: Slings, Shackles, Eye Bolts & Inspection Criteria
NCCER Boilermaker Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The Assessment, Boilermaker Craft, Safety, Tools & Crew Leadership
1.1 The NCCER Boilermaker Assessments: Format, Content Domains, Scoring & Credentials 1.2 Craft Fundamentals, Professional Roles & Industrial Safety 1.3 Confined Space Entry, Lockout/Tagout (LOTO) & Atmospheric Testing 1.4 Hand, Pneumatic, Electric & Hydraulic Boilermaker Tools 1.5 Crew Leadership, Job Planning, Production Tracking & Jobsite Communication
2 Chapter 2: Metallurgy, Base Materials, Oxyfuel, Air Carbon Arc & Plasma Cutting
2.1 Industrial Boiler Materials, Carbon & Alloy Steels, ASME Material Specs & Markings 2.2 Base Metal Surface Preparation, Joint Beveling & Fit-Up Cleanliness 2.3 Oxyfuel Cutting Principles, Equipment Setup, Torch Angles & Piercing Techniques 2.4 Air Carbon Arc Cutting and Gouging (CAC-A): Electrodes, Current, Air Supply, Technique & Defects 2.5 Plasma Arc Cutting (PAC): Torch Anatomy, Consumables, Gas Selection, Cut Quality & Safety
3 Chapter 3: Boiler Types, Steam Generation, Feedwater & Combustion Systems
3.1 Firetube Boiler Designs, Circulation Patterns & Operating Principles 3.2 Watertube Boiler Configurations, Natural & Forced Circulation, Drum Internals 3.3 Superheaters, Reheaters, Economizers & Air Heaters 3.4 Feedwater Systems, Deaerators, Condensate Return & Boiler Water Treatment 3.5 Combustion Systems: Burners, Stokers, Pulverizers, Fans & Draft Control
4 Chapter 4: Boiler Pressure & Nonpressure Components
4.1 Steam Drums, Mud Drums, Headers & Waterwalls 4.2 Nonpressure Components: Casing, Breeching, Baffles, Buckstays & Expansion Joints 4.3 Boiler Auxiliaries: Soot Blowers, Safety Valves, Gage Glasses & Blowdown Systems
5 Chapter 5: Valves, Gaskets, Fasteners, Anchors & Pipe Support Systems
5.1 Industrial Valve Types, Markings, Operation & Ratings 5.2 Gasket Materials, Flange Facings, Bolt Torque Sequences & Joint Assembly 5.3 Gasket Layout, Cutting & Fitting for Field-Made Gaskets 5.4 Fasteners, Anchors & Threaded Connection Hardware 5.5 Pipe Hangers, Supports, Rigid Restraints & Spring Can Installation/Adjustment
6 Chapter 6: Blueprint Reading, Welding Symbols & Construction Drawings
6.1 AWS Welding Symbols, Joint Geometry, Contours & NDE Designators 6.2 Piping Schematics, P&IDs, Isometric Drawings & Spool Sheets 6.3 Pressure Vessel General Arrangement, Detail Sheets, Coordinates & Elevations
7 Chapter 7: Trade Mathematics & Pipe Layout Calculations
7.1 Boilermaker Mechanical Trade Math: Offsets, Rolling Offsets & Travel Calculations 7.2 Vessel Volume, Surface Area, Circumference & Head Layout Computations 7.3 Mitered Turns, Segment Layout, Cutbacks & Branch Connections
8 Chapter 8: Pipe Fabrication - Socket Weld, Butt Weld, Threaded, Grooved & Spool Work
8.1 Pipe Materials, Nominal Pipe Size, Wall Schedules & Fitting Standards 8.2 Socket Weld Pipe Fabrication: The 1/16 in. Gap, Fillet Sizing & Cut Lengths 8.3 Butt Weld Pipe Fabrication: End Preparation, Alignment, Fit-Up & Cut Lengths 8.4 Pipe Layout Tools, Wrap-Arounds, Flange Squaring & Fabrication Tolerances 8.5 Threaded and Grooved Pipe Joining Systems 8.6 Spool Fabrication Workflow, Shop Versus Field Welds & Advanced Pipe Fabrication
9 Chapter 9: Tube Fabrication, Bending & Rolling
9.1 Boiler Tube Removal, Inspection, Wall Thinning & Replacement Criteria 9.2 Tube Preparation, Bending Radii, Ovality & Alignment Tolerances 9.3 Tube Expanding Mechanics, Rolling Torque Calculations, Wall Reduction & Flaring/Beading
10 Chapter 10: Welding Processes, Preheat & Stress Relieving
10.1 SMAW, GTAW & FCAW Welding Processes in Pressure Vessel Applications 10.2 Electrode Selection, Storage, Baking & AWS Filler Metal Classifications 10.3 Preheating Standards, Interpass Temperature Control & Post-Weld Heat Treatment (PWHT)
11 Chapter 11: Rigging Equipment, Hardware & Crane Operations
11.1 Rigging Hardware: Slings, Shackles, Eye Bolts & Inspection Criteria 11.2 Rigging Math: Sling Angles, Tension Calculations & Center of Gravity 11.3 Crane Signals, Load Charts, Boom Angle Deratings & Critical Lift Planning
12 Chapter 12: Towers, Heat Exchangers & Refractory/BRIL Systems
12.1 Shell-and-Tube Heat Exchangers: Bundles, Baffles & Floating Heads 12.2 Fractionation Towers, Trays, Downcomers, Packing & Vessel Hardware 12.3 Refractory Materials (Brick, Castable, Ceramic Fiber), Anchoring & Lagging (BRIL)
13 Chapter 13: ASME Codes, Quality Assurance, NDE, Pressure Testing & System Cleaning
13.1 ASME Boiler & Pressure Vessel Code (Sections I, VIII, IX) & NBIC Standards 13.2 Quality Control, Material Test Reports (MTRs), Weld Mapping & Traceability 13.3 Nondestructive Examination (NDE): VT, PT, MT, UT, RT & Discontinuity Evaluation 13.4 Hydrostatic and Pneumatic Testing Procedures, Safety Precautions & MAWP Validation 13.5 System Flushing, Chemical Cleaning, Boil-Out, Steam Blows & Service Leak Testing
11.1 Rigging Hardware: Slings, Shackles, Eye Bolts & Inspection Criteria
Key Takeaways Explain This Topic AI
Rigging hardware and slings operate under strict design safety factors: 5:1 for general hardware, wire rope, and synthetic slings; 4:1 for alloy steel chain slings; and 10:1 for personnel lifting platforms.
Only Grade 80 and Grade 100 alloy steel chain slings equipped with legible manufacturer identification tags are certified for overhead lifting; carbon steel chains (Grade 30, 43, 70) are strictly prohibited.
Shoulder eye bolts must be derated down to 25% to 30% of rated capacity when loaded at a 45-degree angle (and non-shoulder eye bolts must never be loaded angularly), whereas swivel hoist rings maintain 100% rated capacity throughout a 360-degree rotation and 180-degree pivot.
Under ASME B30.9 and OSHA 1926.251, wire rope slings must be immediately removed from service upon detecting 6 randomly distributed broken wires in one rope lay, 3 broken wires in one strand in one lay, or 1 broken wire at an end fitting.
Rigging hooks must be permanently retired if the throat opening stretches more than 5% (or 1/4 inch max) beyond nominal dimensions or if the hook tip twists more than 10 degrees out of plane.
Last updated: August 2026
Rigging Hardware: Slings, Shackles, Eye Bolts & Inspection Criteria
Core Concept: Industrial boilermakers routinely hoist multi-ton pressure vessels, steam drums, tube bundles, boiler casings, and heavy structural modules. Selecting the correct rigging assembly, verifying design safety factors, and rigorously inspecting every sling, shackle, eye bolt, clamp, and beam prior to hoisting under ASME B30.9 , ASME B30.26 , and OSHA 29 CFR 1926.251 is critical to preventing catastrophic rigging failures and workplace fatalities.
1. Slings: Types, Construction & Material Properties
Slings serve as the direct mechanical link between the crane hook and the load. Industrial boilermakers select slings based on material characteristics, load geometry, surface finish, environmental exposure, and chemical compatibility. +-------------------------------------------+
- | INDUSTRIAL RIGGING SLINGS |
- +-------------------------------------------+
- |
- +----------------------------------+----------------------------------+
- | | |
- v v v
- +-------------------------------------+ +--------------------------+ +-------------------------------------+
- | SYNTHETIC SLINGS | | WIRE ROPE SLINGS | | ALLOY CHAIN SLINGS |
- +-------------------------------------+ +--------------------------+ +-------------------------------------+
- | * Flat Synthetic Webbing (Nylon/Poly)| | * 6x19 / 6x37 Class EIPS | | * Grade 80 & Grade 100 Alloy Only |
- | * Endless Roundslings (Poly Yarn) | | * IWRC vs. Fiber Core | | * 4:1 Design Safety Factor |
- | * 5:1 Design Safety Factor | | * Flemish Eye Swaged | | * High Heat & Abrasion Resistance |
- +-------------------------------------+ +--------------------------+ +-------------------------------------+
- Synthetic Web Slings and Endless Round Slings
Synthetic slings protect polished or machined surfaces (such as tube sheet gasket faces, machined boiler nozzles, and clad alloy vessels) from marring and scratching. They are lightweight, highly flexible, and non-sparking.
Synthetic Flat Web Slings (Nylon vs. Polyester):
Nylon (Polyamide): Exhibits high elasticity, stretching approximately 6 % 6\% 6% to 10 % 10\% 10% at rated Working Load Limit (WLL), which absorbs dynamic shock loads. Chemical Limitation: Severely degraded by acids (e.g., boiler chemical wash hydrochloric acid), but resistant to caustic alkalis and hydrocarbons.
Polyester (Dacron): Low stretch (approximately 3 % 3\% 3% at WLL), providing greater control during precision setting of heavy components. Chemical Limitation: Resists mineral acids, but is rapidly destroyed by concentrated caustics and alkalis (e.g., sodium hydroxide solutions).
Synthetic Round Slings (Endless Loop): Consist of multiple continuous loops of polyester core yarn encased within a seamless, double-wall tubular polyester protective jacket. The load-bearing internal yarns never contact the load directly. If the outer jacket suffers abrasion, the internal load-bearing fibers remain protected. Round slings conform tightly around cylindrical shapes in choker and basket hitches.
Wire Rope Slings: Metallurgy, Core Construction & Splices
Wire rope is the standard heavy-duty rigging medium for boilermakers, offering high tensile strength, predictable bending fatigue, and robust abrasion resistance. +--------------------------------------------------+
- | WIRE ROPE CROSS-SECTION (6x19) |
- +--------------------------------------------------+
- Strand (19 Wires)
- / \
- ( o o o o o o )
- ( o o o o o o o o o )
- ( o o o (c) o o )
- ( o o o o o o )
- |
- v
- IWRC (Independent Wire Rope Core) at Center
Steel Grades:
IPS (Improved Plow Steel): Baseline carbon steel alloy.
EIPS (Extra Improved Plow Steel): Approximately 15 % 15\% 15% higher tensile strength than IPS; the modern industrial standard.
EEIPS (Extra Extra Improved Plow Steel): Approximately 10 % 10\% 10% higher tensile strength than EIPS, used for ultra-heavy critical lifts.
Strand Classifications:
6 × 19 6 \times 19 6 × 19 Classification (6 Strands, 19 to 26 Wires per Strand): Features larger individual outer wires. Delivers superior resistance to exterior abrasion, scrubbing, and dragging across boiler steel, but possesses moderate flexibility.
6 × 37 6 \times 37 6 × 37 Classification (6 Strands, 27 to 49 Wires per Strand): Features smaller individual wires. Delivers superior flexibility and bending fatigue resistance around small-diameter boiler lugs and tight sheaves, but has lower resistance to abrasive scrubbing.
Core Types:
IWRC (Independent Wire Rope Core): A miniature steel wire rope functioning as the central core. Prevents rope flattening and crushing when wound under tension on crane drums or rigged over small-radius shackles. Operating temperature limit: up to 400 ∘ F 400^\circ\text{F} 40 0 ∘ F ( 204 ∘ C 204^\circ\text{C} 20 4 ∘ C ).
Fiber Core (FC): Synthetic or sisal natural fiber core impregnated with lubricant. Highly flexible, but easily crushes under heavy multi-part loading and degrades above 180 ∘ F 180^\circ\text{F} 18 0 ∘ F ( 82 ∘ C 82^\circ\text{C} 8 2 ∘ C ). Fiber cores must never be used in heavy boiler construction rigging.
End Terminations:
Flemish Eye Mechanical Splice: The wire rope strands are unlaid, looped into an interlocking eye, and secured with a swaged carbon steel or aluminum sleeve. Delivers 95 % 95\% 95% to 100 % 100\% 100% of catalog wire rope breaking strength. This is the only acceptable field eye termination for overhead boiler rigging.
Hand-Tucked Eye Splice: Strands are woven manually back into the body; develops only 80 % 80\% 80% to 90 % 90\% 90% efficiency.
U-Bolt Wire Rope Clips (Crosby Clips): Strictly prohibited for fabricating overhead lifting slings under OSHA 1926.251. When used for non-lifting winching or temporary guy lines, the U-bolt must sit on the dead (short) end of the rope (" Never saddle a dead horse "), reducing termination efficiency to 80 % 80\% 80% .
Alloy Steel Chain Slings (Grade 80 and Grade 100)
Chain slings resist cutting, high ambient temperatures, and rough industrial surfaces. Under ASME B30.9 , only two grades of alloy steel chain are certified for overhead lifting:
Grade 80 (T8): High-strength alloy steel with an energy-absorbing elongation capacity of at least 20 % 20\% 20% prior to fracture. Operating temperature up to 400 ∘ F 400^\circ\text{F} 40 0 ∘ F without derating ( 400 ∘ F − 600 ∘ F → 10 % 400^\circ\text{F}-600^\circ\text{F} \rightarrow 10\% 40 0 ∘ F − 60 0 ∘ F → 10% derate; > 1000 ∘ F → >1000^\circ\text{F} \rightarrow > 100 0 ∘ F → permanently condemned).
Grade 100 (V10): Premium alloy steel providing roughly 25 % 25\% 25% higher WLL than Grade 80 for the same nominal wire diameter, reducing rigging tare weight.
Prohibited Chains for Overhead Lifting: Carbon steel chains—including Grade 30 Proof Coil , Grade 43 High Test , and Grade 70 Transport (Tie-Down) chain —lack the alloy microstructure, shock-load toughness, and elongation characteristics required for overhead lifting and are strictly prohibited .
Mandatory Chain Sling Identification Tag: Every chain sling must feature a permanently affixed, stamped metal identification tag detailing: (1) Manufacturer name, (2) Grade, (3) Nominal chain size, (4) Number of legs, (5) Rated capacity at specified sling angles, and (6) Reach length. If the tag is missing or illegible, the sling must be removed from service immediately.
2. Rigging Hardware: Shackles, Eye Bolts, Rings & Clamps
All rigging hardware must be forged from high-grade alloy steel and permanently embossed with the manufacturer's trademark, nominal size, and Working Load Limit (WLL). +-----------------------------------------------------------------------------------------+
- | RIGGING HARDWARE SELECTION MATRIX |
- +-----------------------------------------------------------------------------------------+
- | Hardware Type | Design Safety Factor | Primary Application & Operational Limits|
- +-----------------------+----------------------+------------------------------------------+
- | Rigging Hardware | 5:1 (ASME B30.26) | Shackles, turnbuckles, master links, |
- | (General) | | swivel hoist rings, eye bolts. |
- +-----------------------+----------------------+------------------------------------------+
- | Alloy Chain Slings | 4:1 (ASME B30.9) | Grade 80 and Grade 100 overhead slings. |
- +-----------------------+----------------------+------------------------------------------+
- | Personnel Baskets | 10:1 (ASME B30.23) | Crane-suspended work platforms. |
- +-----------------------+----------------------+------------------------------------------+
- Forged Alloy Steel Shackles
Shackles are the universal connecting component in rigging assemblies:
Bow (Anchor) Shackles vs. D (Chain) Shackles:
Bow Shackles: Feature an enlarged, rounded bow profile that accommodates multiple sling legs at angles up to 45 ∘ 45^\circ 4 5 ∘ from the centerline without pinching the sling or generating severe side-loading bending stresses.
D (Chain) Shackles: Feature straight, parallel sides designed strictly for single-leg, inline 0 ∘ 0^\circ 0 ∘ axial tension. Applying angular or side loads to a D-shackle induces destructive bending moments on the ears.
Pin Configurations:
Screw Pin Shackles: Threaded pin screws directly into the tapped shackle ear. Quick to install for temporary picks. Operational Rules: The pin must be fully seated and then backed off 1 / 4 1/4 1/4 turn ( 90 ∘ 90^\circ 9 0 ∘ ) to prevent mechanical binding under load. If used in vibrating or dynamic settings, the pin must be "moused" (secured with stainless steel safety wire). Moving lines (chokers) must never run across a screw pin, as line friction can unscrew the pin during hoisting.
Bolt-Type Safety Shackles: Feature an unthreaded bolt shank secured by an external hex nut and stainless steel cotter pin. Mandatory for permanent rigging, heavy critical lifts, multi-crane tandem lifts, and lifts where rotation could back out a screw pin. SCREW PIN SHACKLE BOLT-TYPE SAFETY SHACKLE
- +-------+ +-------+
- / \ / \
- | BOW | | BOW |
- | BODY | | BODY |
- \ / \ /
- (O) (O) (O) (O)
- ===|=====|=== ===|=====|==[Nut]-[Cotter]
- Threaded Pin Bolt Shank
- Eye Bolts vs. Swivel Hoist Rings
Rigging into threaded vessel bosses requires strict hardware selection based on the angle of pull:
Non-Shoulder Eye Bolts: Designed strictly for 100 % 100\% 100% inline, axial pulls ( 0 ∘ 0^\circ 0 ∘ ) . Non-shoulder eye bolts have zero angular capacity. Any angular load introduces extreme cantilever bending stress across the root threads, causing sudden shear failure.
Shoulder Eye Bolts: Feature a forged, machined shoulder that seats flush against the equipment mounting surface. While permitted for angular rigging, shoulder eye bolts suffer severe load deratings under ASME B30.26:
0 ∘ 0^\circ 0 ∘ (Inline Axial Pull): 100 % 100\% 100% of rated WLL.
75 ∘ 75^\circ 7 5 ∘ to 89 ∘ 89^\circ 8 9 ∘ Pull Angle: Derated to 55 % 55\% 55% of rated WLL.
45 ∘ 45^\circ 4 5 ∘ to 74 ∘ 74^\circ 7 4 ∘ Pull Angle: Derated to 25 % 25\% 25% to 30 % 30\% 30% of rated WLL.
< 30 ∘ < 30^\circ < 3 0 ∘ Pull Angle: Strictly Prohibited .
Installation Rule: The shoulder must seat 100 % 100\% 100% flush against the machined surface. If necessary, hardened steel shims/washers are used under the shoulder, ensuring full thread engagement of at least 1.5 × 1.5 \times 1.5 × bolt diameter in steel.
Swivel Hoist Rings: Engineered lifting devices featuring a forged alloy bail that pivots 180 ∘ 180^\circ 18 0 ∘ vertically and swivels 360 ∘ 360^\circ 36 0 ∘ horizontally on an internal bushing. Swivel hoist rings maintain 100 % 100\% 100% full rated capacity at any angle from 0 ∘ 0^\circ 0 ∘ to 90 ∘ 90^\circ 9 0 ∘ , provided the mounting bolt is torqued to manufacturer specifications with a calibrated torque wrench. SHOULDER EYE BOLT SWIVEL HOIST RING
- (Severe Derating!) (100% WLL at ANY Angle)
- /---\ /---\ <- 180 deg Pivot Bail
- | | | |
- \---/ \---/
- +-----+ <- Shoulder Seats Flush +=====+ <- 360 deg Swivel Base
- | |
- | <- Full Thread Engaged | <- Torqued Cap Screw
- Lifting Beams, Plate Clamps & Beam Clamps
Spreader Beams vs. Equalizer Beams:
Spreader Beam: A rigid horizontal tubular or wide-flange strut suspended between two top sling legs. The spreader beam converts the angled tension of the top rigging into pure vertical drops to the load, subjecting the beam itself to pure axial compression . This protects thin-walled boiler ducts, steam drums, and tube bundles from inward crushing forces.
Equalizer Beam: A structural beam designed to operate in bending , equipped with multiple lower connection points or center pivot pins/sheaves. Equalizer beams equalize load sharing between two cranes in a tandem lift or distribute unequal loads across asymmetrical pick points.
Plate Clamps:
Vertical Locking Plate Clamps: Feature a spring-loaded, hardened serrated cam that bites into steel plate. The manual lock lever must be fully engaged before hoisting. Crucial Limits: Minimum load requirement is typically 20 % 20\% 20% of WLL (to prevent cam disengagement); plate surface hardness must not exceed 300 to 400 HB 300\text{ to }400\text{ HB} 300 to 400 HB ( 32 HRC 32\text{ HRC} 32 HRC ); lifts are restricted strictly to one single plate at a time.
Horizontal Plate Clamps: Used in matched pairs connected to a two-leg sling bridle to transport flat steel sheets in a horizontal orientation.
Beam Clamps: Mechanical jaw clamps engineered to grip structural I-beam flanges for hoisting or rigging anchorages. Must be loaded strictly perpendicular ( 90 ∘ 90^\circ 9 0 ∘ ) to the beam flange unless specifically rated by the manufacturer for angular loading.
3. Rigging Inspection & Rejection Criteria (ASME & OSHA)
Rigging failure in boiler construction often results from unspotted hardware fatigue or wear. ASME B30.9, ASME B30.26, and OSHA 1926.251 mandate daily pre-use visual inspections by a Competent Person. +-----------------------------------------------------------------------------------------+
- | COMPREHENSIVE RIGGING REJECTION CRITERIA REFERENCE |
- +-----------------------------------------------------------------------------------------+
- | Rigging Component | Mandatory Rejection Criteria (Immediate Removal from Service) |
- +-----------------------+-----------------------------------------------------------------+
- | **Wire Rope Slings** | * 10 randomly distributed broken wires in one rope lay. |
- | (ASME B30.9 / OSHA) | * 5 broken wires in one strand in one rope lay. |
- | | * 1 broken wire at an end fitting, sleeve, or termination. |
- | | * Severe localized wear (> 10% nominal diameter reduction). |
- | | * Kinking, birdcaging, doglegs, core protrusion, heat/arc burns.|
- +-----------------------+-----------------------------------------------------------------+
- | **Synthetic Slings** | * Acid burns (nylon) or caustic chemical burns (polyester). |
- | (ASME B30.9) | * Melting, charring, or weld spatter burns. |
- | | * Snags, tears, punctures, cuts, or broken load-bearing stitches.|
- | | * Exposed red core warning yarns visible through outer jacket. |
- | | * Missing, illegible, or detached manufacturer capacity tag. |
- +-----------------------+-----------------------------------------------------------------+
- | **Chain Slings** | * Missing or illegible metal identification tag. |
- | (ASME B30.9) | * Cracks, breaks, or severe gouges in any link or fitting. |
- | | * Wear exceeding 10% of original link stock diameter. |
- | | * Stretch or link elongation exceeding 5% of total reach. |
- | | * Heat exposure exceeding 400 deg F (Gr 100) or 600 deg F (Gr 80)|
- +-----------------------+-----------------------------------------------------------------+
- | **Shackles & Rings** | * Pin or body wear exceeding 10% of original dimension. |
- | (ASME B30.26) | * Bent, twisted, or distorted shackle body or pin. |
- | | * Missing cotter pins or damaged pin threads. |
- +-----------------------+-----------------------------------------------------------------+
- | **Rigging Hooks** | * Throat opening stretch exceeding 5% (or 1/4 inch max). |
- | (ASME B30.10) | * Hook tip twist exceeding 10 degrees from plane of unbent body.|
- | | * Bowl or saddle wear exceeding 10% of nominal dimension. |
- | | * Missing or inoperable spring-loaded safety latch. |
+-----------------------+-----------------------------------------------------------------+ WIRE ROPE DEFECTS REQUIRING IMMEDIATE CONDEMNATION
BIRDCAGING: KINKING: BROKEN WIRES:
- ,---. /\ --x-------x--
- / \ / \ <- Permanent ----x---x----
- | ( ) ( ) | <- Strands / \ Deformation --x----------
- \ / Opened Out / \ 6 in 1 Lay OR
- `---' / \ 3 in 1 Strand
4. Realistic Trade Scenario: Boiler Header Rigging Pre-Check +-----------------------------------------------------------------------------------------+
- | FIELD TRADE SCENARIO |
- +-----------------------------------------------------------------------------------------+
- | Scenario: A boilermaker rigging crew is tasked with lifting an 18,000-pound economizer |
- | inlet header inside a utility boiler penthouse using a 2-leg wire rope bridle and |
- | screw-pin shackles rigged into welded lifting lugs. |
- | |
- | Pre-Lift Inspection & Rigging Protocol: |
- | 1. Wire Rope Sling Check: |
- | - Inspect 1-inch EIPS 6x19 IWRC slings. Verify Flemish eye swaged sleeves are intact.|
- | - Examine rope body: Zero birdcaging, zero kinking, and broken wire count is 0. |
- | - Confirm manufacturer capacity tag reads WLL >= 18,000 lbs at 60 deg sling angle. |
- | 2. Shackle Verification: |
- | - Inspect 1-1/4 inch alloy bow shackles (WLL = 12 Tons each). Check pin wear (< 10%).|
- | - Thread shackle pin into lug, fully bottom the pin, and back off 1/4 turn (90 deg). |
- | - Mouse the screw pins with stainless steel wire to prevent dynamic loosening. |
- | 3. Rigging Geometry & Hook Safety: |
- | - Verify the crane hook safety latch closes completely over the master link. |
- | - Check hook throat opening against caliper baseline (zero stretch detected). |
- | - Ensure sling legs maintain a minimum 60-degree horizontal angle during pick. |
- +-----------------------------------------------------------------------------------------+