Study guide

7.2 Vessel Volume, Surface Area, Circumference & Head Layout Computations

NCCER Boilermaker Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Assessment, Boilermaker Craft, Safety, Tools & Crew Leadership

1.1 The NCCER Boilermaker Assessments: Format, Content Domains, Scoring & Credentials 1.2 Craft Fundamentals, Professional Roles & Industrial Safety 1.3 Confined Space Entry, Lockout/Tagout (LOTO) & Atmospheric Testing 1.4 Hand, Pneumatic, Electric & Hydraulic Boilermaker Tools 1.5 Crew Leadership, Job Planning, Production Tracking & Jobsite Communication

2 Chapter 2: Metallurgy, Base Materials, Oxyfuel, Air Carbon Arc & Plasma Cutting

2.1 Industrial Boiler Materials, Carbon & Alloy Steels, ASME Material Specs & Markings 2.2 Base Metal Surface Preparation, Joint Beveling & Fit-Up Cleanliness 2.3 Oxyfuel Cutting Principles, Equipment Setup, Torch Angles & Piercing Techniques 2.4 Air Carbon Arc Cutting and Gouging (CAC-A): Electrodes, Current, Air Supply, Technique & Defects 2.5 Plasma Arc Cutting (PAC): Torch Anatomy, Consumables, Gas Selection, Cut Quality & Safety

3 Chapter 3: Boiler Types, Steam Generation, Feedwater & Combustion Systems

3.1 Firetube Boiler Designs, Circulation Patterns & Operating Principles 3.2 Watertube Boiler Configurations, Natural & Forced Circulation, Drum Internals 3.3 Superheaters, Reheaters, Economizers & Air Heaters 3.4 Feedwater Systems, Deaerators, Condensate Return & Boiler Water Treatment 3.5 Combustion Systems: Burners, Stokers, Pulverizers, Fans & Draft Control

4 Chapter 4: Boiler Pressure & Nonpressure Components

4.1 Steam Drums, Mud Drums, Headers & Waterwalls 4.2 Nonpressure Components: Casing, Breeching, Baffles, Buckstays & Expansion Joints 4.3 Boiler Auxiliaries: Soot Blowers, Safety Valves, Gage Glasses & Blowdown Systems

5 Chapter 5: Valves, Gaskets, Fasteners, Anchors & Pipe Support Systems

5.1 Industrial Valve Types, Markings, Operation & Ratings 5.2 Gasket Materials, Flange Facings, Bolt Torque Sequences & Joint Assembly 5.3 Gasket Layout, Cutting & Fitting for Field-Made Gaskets 5.4 Fasteners, Anchors & Threaded Connection Hardware 5.5 Pipe Hangers, Supports, Rigid Restraints & Spring Can Installation/Adjustment

6 Chapter 6: Blueprint Reading, Welding Symbols & Construction Drawings

6.1 AWS Welding Symbols, Joint Geometry, Contours & NDE Designators 6.2 Piping Schematics, P&IDs, Isometric Drawings & Spool Sheets 6.3 Pressure Vessel General Arrangement, Detail Sheets, Coordinates & Elevations

7 Chapter 7: Trade Mathematics & Pipe Layout Calculations

7.1 Boilermaker Mechanical Trade Math: Offsets, Rolling Offsets & Travel Calculations 7.2 Vessel Volume, Surface Area, Circumference & Head Layout Computations 7.3 Mitered Turns, Segment Layout, Cutbacks & Branch Connections

8 Chapter 8: Pipe Fabrication - Socket Weld, Butt Weld, Threaded, Grooved & Spool Work

8.1 Pipe Materials, Nominal Pipe Size, Wall Schedules & Fitting Standards 8.2 Socket Weld Pipe Fabrication: The 1/16 in. Gap, Fillet Sizing & Cut Lengths 8.3 Butt Weld Pipe Fabrication: End Preparation, Alignment, Fit-Up & Cut Lengths 8.4 Pipe Layout Tools, Wrap-Arounds, Flange Squaring & Fabrication Tolerances 8.5 Threaded and Grooved Pipe Joining Systems 8.6 Spool Fabrication Workflow, Shop Versus Field Welds & Advanced Pipe Fabrication

9 Chapter 9: Tube Fabrication, Bending & Rolling

9.1 Boiler Tube Removal, Inspection, Wall Thinning & Replacement Criteria 9.2 Tube Preparation, Bending Radii, Ovality & Alignment Tolerances 9.3 Tube Expanding Mechanics, Rolling Torque Calculations, Wall Reduction & Flaring/Beading

10 Chapter 10: Welding Processes, Preheat & Stress Relieving

10.1 SMAW, GTAW & FCAW Welding Processes in Pressure Vessel Applications 10.2 Electrode Selection, Storage, Baking & AWS Filler Metal Classifications 10.3 Preheating Standards, Interpass Temperature Control & Post-Weld Heat Treatment (PWHT)

11 Chapter 11: Rigging Equipment, Hardware & Crane Operations

11.1 Rigging Hardware: Slings, Shackles, Eye Bolts & Inspection Criteria 11.2 Rigging Math: Sling Angles, Tension Calculations & Center of Gravity 11.3 Crane Signals, Load Charts, Boom Angle Deratings & Critical Lift Planning

12 Chapter 12: Towers, Heat Exchangers & Refractory/BRIL Systems

12.1 Shell-and-Tube Heat Exchangers: Bundles, Baffles & Floating Heads 12.2 Fractionation Towers, Trays, Downcomers, Packing & Vessel Hardware 12.3 Refractory Materials (Brick, Castable, Ceramic Fiber), Anchoring & Lagging (BRIL)

13 Chapter 13: ASME Codes, Quality Assurance, NDE, Pressure Testing & System Cleaning

13.1 ASME Boiler & Pressure Vessel Code (Sections I, VIII, IX) & NBIC Standards 13.2 Quality Control, Material Test Reports (MTRs), Weld Mapping & Traceability 13.3 Nondestructive Examination (NDE): VT, PT, MT, UT, RT & Discontinuity Evaluation 13.4 Hydrostatic and Pneumatic Testing Procedures, Safety Precautions & MAWP Validation 13.5 System Flushing, Chemical Cleaning, Boil-Out, Steam Blows & Service Leak Testing

7.2 Vessel Volume, Surface Area, Circumference & Head Layout Computations

Key Takeaways Explain This Topic AI

In heavy-wall plate rolling, the blank stretchout length MUST be calculated using the Mean Diameter (Dm = ID + t = OD - t, Stretchout L = π × Dm) because the neutral axis of the plate neither elongates nor compresses during rolling.

Cylinder surface area (A = π × D × H) and internal volume (V = π × r² × H = 0.7854 × D² × H) form the baseline for structural weight, internal fluid capacities, and exterior lagging and coating calculations.

Total hydrostatic test and erection loads equal the dry shell metal weight plus total water fill weight (1 cu ft = 7.48 gallons, water density = 62.4 lbs/cu ft or 8.33 lbs/gal), which routinely exceeds dry vessel weight by 200% to 400% and dictates crane rigging and foundation design.

Dished pressure vessel heads (ASME 2:1 Ellipsoidal, ASME Torispherical F&D with Crown Radius = OD and Knuckle Radius = 6% × OD, and Hemispherical R = D/2) determine blank layout sizing, internal fluid capacities, and pressure containment ratings.

Last updated: August 2026

7.2 Vessel Volume, Surface Area, Circumference & Head Layout Computations

Core Trade Concept: Boilermakers regularly fabricate, assemble, and rig massive cylindrical pressure vessels, steam drums, deaerators, and storage tanks. Mastering vessel layout mathematics—including Mean Diameter plate stretchouts , shell surface areas , volumetric fluid capacities , hydrostatic fill weights , and formed head blank geometry —is critical to ensure precise roll fit-up, code-compliant weld seams, and safe rigging capacities.

1. Circumference, Neutral Axis & Mean Diameter in Plate Rolling

When flat steel plate is rolled into a cylindrical cylinder on hydraulic pyramid or pinch rolls, the metal undergoes severe plastic deformation:

The outer fibers of the plate are placed in tension and stretch (lengthen) .

The inner fibers of the plate are placed in compression and shrink (shorten) .

Exactly midway through the plate thickness lies the Neutral Axis , where the metal experiences zero elongation and zero compression. NEUTRAL AXIS IN ROLLED PLATE

  • <------------------- OD (Tension - Stretches) ------------------->
  • +-------------------------------------------------------------------+
  • | |
  • | - - - - - - - - - - NEUTRAL AXIS (Dm) - - - - - - - - - - - - - - | t (Thk)
  • | |
  • +-------------------------------------------------------------------+
  • <------------------ ID (Compression - Shortens) ----------------->
  • Mean Diameter ( D m D_m D m ​ ) Formulation

To ensure that a rolled cylinder closes to the exact design diameter with zero gap or overlap at the longitudinal weld seam, the flat plate cut length ( Stretchout ) must be calculated using the Mean Diameter ( D m D_m D m ​ ) (the diameter measured to the neutral axis): D m = Inside Diameter (ID) + Plate Thickness ( t ) D_m = \text{Inside Diameter (ID)} + \text{Plate Thickness } (t) D m ​ = Inside Diameter (ID) + Plate Thickness ( t ) D m = Outside Diameter (OD) − Plate Thickness ( t ) D_m = \text{Outside Diameter (OD)} - \text{Plate Thickness } (t) D m ​ = Outside Diameter (OD) − Plate Thickness ( t )

Plate Stretchout Length ( L L L ) Stretchout Length ( L ) = π × D m = 3.14159 × D m \text{Stretchout Length } (L) = \pi \times D_m = 3.14159 \times D_m Stretchout Length ( L ) = π × D m ​ = 3.14159 × D m ​

Critical Trade Error Warning:

Calculating stretchout using the ID results in a shell that is too short , causing a large gap at the longitudinal seam that cannot be pulled together.

Calculating stretchout using the OD results in a shell that is too long , causing the plate edges to overlap and requiring torch-cutting and beveling.

Worked Example: Heavy Plate Rolling Stretchout

A boilermaker must cut a flat plate of SA-516 Grade 70 carbon steel with a thickness of 1.500 inches 1.500\text{ inches} 1.500 inches to roll a vessel shell with an Inside Diameter (ID) of 96.000 inches 96.000\text{ inches} 96.000 inches ( 8 feet 8\text{ feet} 8 feet ID): Mean Diameter ( D m ) = ID + t = 96.000 in. + 1.500 in. = 97.500 inches \text{Mean Diameter } (D_m) = \text{ID} + t = 96.000\text{ in.} + 1.500\text{ in.} = 97.500\text{ inches} Mean Diameter ( D m ​ ) = ID + t = 96.000 in. + 1.500 in. = 97.500 inches Stretchout Length ( L ) = π × D m = 3.14159 × 97.500 in. = 306.305 inches ≈ 306 – 5 16 inches \text{Stretchout Length } (L) = \pi \times D_m = 3.14159 \times 97.500\text{ in.} = 306.305\text{ inches} \approx 306\text{--}\frac{5}{16}\text{ inches} Stretchout Length ( L ) = π × D m ​ = 3.14159 × 97.500 in. = 306.305 inches ≈ 306 – 16 5 ​ inches

(Note: If the boilermaker had mistakenly used the ID, the plate would be 301.593 in. 301.593\text{ in.} 301.593 in. , resulting in a disastrous 4.712 in. 4.712\text{ in.} 4.712 in. gap at the joint).

2. Cylindrical Shell Surface Area & Volumetric Computations CYLINDRICAL VESSEL GEOMETRY

  • +-------+
  • / \ Head Area (A_head)
  • +-----------+
  • | |
  • | |
  • | V | Shell Height / Length (H)
  • | Volume |
  • | |
  • | |
  • +-----------+
  • \ / Diameter (D)
  • +-------+
  • Cylindrical Surface Area

The lateral surface area of a cylindrical shell (excluding the two heads) is the stretchout circumference multiplied by the shell length or height ( H H H ): A s h e l l = π × D × H A_{shell} = \pi \times D \times H A s h e ll ​ = π × D × H

Trade Application: Surface area is used to calculate the required square footage of insulation, exterior protective lagging, refractory fireproofing, and epoxy coating systems (where paint coverage is rated in sq ft/gallon \text{sq ft/gallon} sq ft/gallon ).

Cylindrical Volume Formulas

The internal volumetric capacity of a cylindrical vessel (exclusive of dished heads) is calculated using radius ( r r r ) or diameter ( D D D ): V = π × r 2 × H = π 4 × D 2 × H ≈ 0.7854 × D 2 × H V = \pi \times r^2 \times H = \frac{\pi}{4} \times D^2 \times H \approx 0.7854 \times D^2 \times H V = π × r 2 × H = 4 π ​ × D 2 × H ≈ 0.7854 × D 2 × H

Essential Trade Conversion Factors Table

Measurement Parameter Conversion Relationship Trade Multiplication Factor

Cubic Inches to Cubic Feet 1 cu ft = 1,728 cu in. 1\text{ cu ft} = 1{,}728\text{ cu in.} 1 cu ft = 1 , 728 cu in. ( 12 × 12 × 12 12 \times 12 \times 12 12 × 12 × 12 ) Volume (cu ft) = Volume (cu in.) 1,728 \text{Volume (cu ft)} = \frac{\text{Volume (cu in.)}}{1{,}728} Volume (cu ft) = 1 , 728 Volume (cu in.) ​

Cubic Feet to Gallons 1 cu ft = 7.4805 U.S. gallons 1\text{ cu ft} = 7.4805\text{ U.S. gallons} 1 cu ft = 7.4805 U.S. gallons Gallons = cu ft × 7.4805 \text{Gallons} = \text{cu ft} \times 7.4805 Gallons = cu ft × 7.4805

Gallons to Water Weight 1 U.S. gallon of water = 8.33 lbs 1\text{ U.S. gallon of water} = 8.33\text{ lbs} 1 U.S. gallon of water = 8.33 lbs (at 60 ∘ F 60^\circ\text{F} 6 0 ∘ F ) Weight (lbs) = Gallons × 8.33 \text{Weight (lbs)} = \text{Gallons} \times 8.33 Weight (lbs) = Gallons × 8.33

Cubic Feet to Water Weight 1 cu ft of water = 62.4 lbs 1\text{ cu ft of water} = 62.4\text{ lbs} 1 cu ft of water = 62.4 lbs Weight (lbs) = cu ft × 62.4 \text{Weight (lbs)} = \text{cu ft} \times 62.4 Weight (lbs) = cu ft × 62.4

Carbon Steel Plate Weight 1 sq ft of 1 -inch thick steel = 40.8 lbs 1\text{ sq ft of } 1\text{-inch thick steel} = 40.8\text{ lbs} 1 sq ft of 1 -inch thick steel = 40.8 lbs Steel Weight (lbs) = Area (sq ft) × t (in.) × 40.8 \text{Steel Weight (lbs)} = \text{Area (sq ft)} \times t\text{ (in.)} \times 40.8 Steel Weight (lbs) = Area (sq ft) × t (in.) × 40.8

Density of Carbon Steel ρ s t e e l = 0.2833 lbs/cu in. = 490 lbs/cu ft \rho_{steel} = 0.2833\text{ lbs/cu in.} = 490\text{ lbs/cu ft} ρ s t ee l ​ = 0.2833 lbs/cu in. = 490 lbs/cu ft Weight (lbs) = Volume (cu in.) × 0.2833 \text{Weight (lbs)} = \text{Volume (cu in.)} \times 0.2833 Weight (lbs) = Volume (cu in.) × 0.2833

3. Hydrostatic Fill Weight & Rigging/Foundation Load Analysis

During pre-commissioning of boilers and pressure vessels, ASME Section I and Section VIII mandate a hydrostatic pressure test (typically 1.3 to 1.5 × MAWP 1.3\text{ to }1.5 \times \text{MAWP} 1.3 to 1.5 × MAWP ) by completely filling the vessel with water and venting all trapped air.

Because water is extremely dense ( 62.4 lbs/cu ft 62.4\text{ lbs/cu ft} 62.4 lbs/cu ft ), the water fill weight frequently dwarfs the dry metal weight of the vessel. Boilermakers and rigging supervisors must calculate the combined Total Hydrostatic Load to prevent crane overload during shop hydro, catastrophic structural collapse of temporary rigging cribbing, or foundation settlement. Total Hydrostatic Load = Dry Shell Weight + Water Fill Weight + Internal Hardware Weight \text{Total Hydrostatic Load} = \text{Dry Shell Weight} + \text{Water Fill Weight} + \text{Internal Hardware Weight} Total Hydrostatic Load = Dry Shell Weight + Water Fill Weight + Internal Hardware Weight HYDROSTATIC LOAD BALANCE PROFILE

  • +-------------------------------------------------------+
  • | [Dry Vessel Shell Steel] ~25% of Total Weight |
  • +-------------------------------------------------------+
  • | [Internal Hydrostatic Water Fill] ~75% of Total Weight|
  • | ===================================================== |
  • | TOTAL RIGGING & FOUNDATION LOAD = STEEL + WATER |
  • +-------------------------------------------------------+
  • Comprehensive Worked Hydrostatic Load Problem

Scenario: A vertical deaerator storage tank has an inside diameter of 8.00 feet 8.00\text{ feet} 8.00 feet ( 96 inches 96\text{ inches} 96 inches , r = 4.00 ft r = 4.00\text{ ft} r = 4.00 ft ) and a straight shell length of 20.00 feet 20.00\text{ feet} 20.00 feet . The shell is fabricated from 1.00 in. 1.00\text{ in.} 1.00 in. thick carbon steel plate.

Step 1: Calculate Shell Surface Area & Dry Shell Metal Weight: Shell Mean Diameter ( D m ) = 8.00 ft + ( 1.00 12 ft ) = 8.0833 ft \text{Shell Mean Diameter } (D_m) = 8.00\text{ ft} + \left(\frac{1.00}{12}\text{ ft}\right) = 8.0833\text{ ft} Shell Mean Diameter ( D m ​ ) = 8.00 ft + ( 12 1.00 ​ ft ) = 8.0833 ft Shell Lateral Area = π × D m × H = 3.14159 × 8.0833 ft × 20.00 ft = 507.88 sq ft \text{Shell Lateral Area} = \pi \times D_m \times H = 3.14159 \times 8.0833\text{ ft} \times 20.00\text{ ft} = 507.88\text{ sq ft} Shell Lateral Area = π × D m ​ × H = 3.14159 × 8.0833 ft × 20.00 ft = 507.88 sq ft Dry Shell Weight = 507.88 sq ft × 1.00 in. (thk) × 40.8 lbs/sq ft/in. = 20,721 lbs \text{Dry Shell Weight} = 507.88\text{ sq ft} \times 1.00\text{ in. (thk)} \times 40.8\text{ lbs/sq ft/in.} = 20{,}721\text{ lbs} Dry Shell Weight = 507.88 sq ft × 1.00 in. (thk) × 40.8 lbs/sq ft/in. = 20 , 721 lbs

(Adding approx. 4,279 lbs 4{,}279\text{ lbs} 4 , 279 lbs for two dished heads and nozzles yields a total dry vessel weight of ≈ 25,000 lbs \approx 25{,}000\text{ lbs} ≈ 25 , 000 lbs ).

Step 2: Calculate Internal Cylindrical Volume: V = π × r 2 × H = 3.14159 × ( 4.00 ft ) 2 × 20.00 ft = 3.14159 × 16 × 20 = 1,005.31 cu ft V = \pi \times r^2 \times H = 3.14159 \times (4.00\text{ ft})^2 \times 20.00\text{ ft} = 3.14159 \times 16 \times 20 = 1{,}005.31\text{ cu ft} V = π × r 2 × H = 3.14159 × ( 4.00 ft ) 2 × 20.00 ft = 3.14159 × 16 × 20 = 1 , 005.31 cu ft

Step 3: Convert Volume to Gallons: Water Volume = 1,005.31 cu ft × 7.4805 gal/cu ft = 7,520.2 U.S. gallons \text{Water Volume} = 1{,}005.31\text{ cu ft} \times 7.4805\text{ gal/cu ft} = 7{,}520.2\text{ U.S. gallons} Water Volume = 1 , 005.31 cu ft × 7.4805 gal/cu ft = 7 , 520.2 U.S. gallons

Step 4: Calculate Total Water Fill Weight: Water Weight = 1,005.31 cu ft × 62.4 lbs/cu ft = 62,731 lbs \text{Water Weight} = 1{,}005.31\text{ cu ft} \times 62.4\text{ lbs/cu ft} = 62{,}731\text{ lbs} Water Weight = 1 , 005.31 cu ft × 62.4 lbs/cu ft = 62 , 731 lbs ( Alternatively: 7,520.2 gal × 8.33 lbs/gal = 62,643 lbs ) (\text{Alternatively: } 7{,}520.2\text{ gal} \times 8.33\text{ lbs/gal} = 62{,}643\text{ lbs}) ( Alternatively: 7 , 520.2 gal × 8.33 lbs/gal = 62 , 643 lbs )

Step 5: Calculate Total Hydrostatic Test Load: Total Load = 25,000 lbs (Dry Steel) + 62,731 lbs (Water) = 87,731 lbs ≈ 43.87 tons \text{Total Load} = 25{,}000\text{ lbs (Dry Steel)} + 62{,}731\text{ lbs (Water)} = 87{,}731\text{ lbs} \approx 43.87\text{ tons} Total Load = 25 , 000 lbs (Dry Steel) + 62 , 731 lbs (Water) = 87 , 731 lbs ≈ 43.87 tons

Key Takeaway: The water adds over 31 tons 31\text{ tons} 31 tons to the dry vessel weight, representing over 71 % 71\% 71% of the total load on the support saddles!

4. Dished Pressure Vessel Head Geometries & Blank Layout

Pressure vessels are enclosed with formed dished heads. The geometric shape of the head governs its pressure-containing capability, internal volume, and the flat blank diameter required for pressing or spinning. PRESSURE VESSEL HEAD PROFILES

  • HEMISPHERICAL (R = D/2) 2:1 ELLIPSOIDAL (h = D/4)
  • +-------------+ +-------------+
  • / \ / \
  • | | | |
  • | | +-------------------+
  • +-------------------+ ASME TORISPHERICAL (F&D)
  • (Thinnest Wall; (Crown R = OD; Knuckle r = 6% OD)
  • Highest Pressure) (Economical Standard Industrial)
  • Formed Head Specifications & ASME Section VIII Characteristics

Head Type Geometric Proportions ASME Relative Wall Thickness Blank Diameter Estimation Formula ( D b D_b D b ​ ) Trade Applications

Hemispherical Spherical radius R = D 2 R = \frac{D}{2} R = 2 D ​ ; Depth h = D 2 h = \frac{D}{2} h = 2 D ​ 0.5 × 0.5 \times 0.5 × Shell Thickness (Thinnest possible head; membrane stress is half of hoop stress). D b ≈ 1.57 × OD + 2 ( SF ) D_b \approx 1.57 \times \text{OD} + 2(\text{SF}) D b ​ ≈ 1.57 × OD + 2 ( SF ) High-pressure steam drums ( > 1,500 psig >1{,}500\text{ psig} > 1 , 500 psig ) and reactor vessels.

ASME 2:1 Ellipsoidal Major/Minor axis ratio = 2 : 1 = 2:1 = 2 : 1 ; Depth h = D 4 h = \frac{D}{4} h = 4 D ​ ; Crown R = 0.90 D R = 0.90 D R = 0.90 D , Knuckle r = 0.17 D r = 0.17 D r = 0.17 D 1.0 × 1.0 \times 1.0 × Shell Thickness (Equal thickness to seamless cylinder shell). D b ≈ 1.22 × OD + 2 ( SF ) D_b \approx 1.22 \times \text{OD} + 2(\text{SF}) D b ​ ≈ 1.22 × OD + 2 ( SF ) Standard for utility boiler steam drums and refinery vessels ( 500 – 1,500 psig 500\text{--}1{,}500\text{ psig} 500 – 1 , 500 psig ).

ASME Torispherical (Flanged & Dished - F&D) Crown radius L = OD L = \text{OD} L = OD ; Knuckle radius r = 0.06 × OD r = 0.06 \times \text{OD} r = 0.06 × OD ( 6 % 6\% 6% of OD) 1.67 × 1.67 \times 1.67 × Shell Thickness (Requires thicker plate due to high localized bending stress at knuckle). D b ≈ 1.14 × OD + 2 ( SF ) D_b \approx 1.14 \times \text{OD} + 2(\text{SF}) D b ​ ≈ 1.14 × OD + 2 ( SF ) Economical forming for low-to-medium pressure vessels and storage tanks ( < 500 psig <500\text{ psig} < 500 psig ).

Flat Head / Blind Flange Planar flat plate ( h = 0 h = 0 h = 0 ) 3.0 to 5.0 × 3.0\text{ to }5.0 \times 3.0 to 5.0 × Shell Thickness (Pure structural bending resistance). D b = OD D_b = \text{OD} D b ​ = OD (or bolt circle) Heat exchanger channel covers, header end caps, and inspection covers.

(Note: SF = \text{SF} = SF = Straight Flange or cylindrical skirt length, typically 1.5 to 3.0 inches 1.5\text{ to }3.0\text{ inches} 1.5 to 3.0 inches , provided for butt-welding the head to the cylindrical shell away from high knuckle bending stresses).

Worked Example: ASME Torispherical (F&D) Head Blank Sizing

A boilermaker must cut a circular plate blank to press an ASME Torispherical F&D head for an air receiver tank with an Outside Diameter ( OD ) of 48.00 inches 48.00\text{ inches} 48.00 inches and a Straight Flange ( SF ) of 2.00 inches 2.00\text{ inches} 2.00 inches : D b l a n k ≈ ( 1.14 × OD ) + ( 2 × SF ) = ( 1.14 × 48.00 in. ) + ( 2 × 2.00 in. ) = 54.72 + 4.00 = 58.72 inches ≈ 58 – 3 4 in. D_{blank} \approx (1.14 \times \text{OD}) + (2 \times \text{SF}) = (1.14 \times 48.00\text{ in.}) + (2 \times 2.00\text{ in.}) = 54.72 + 4.00 = 58.72\text{ inches} \approx 58\text{--}\frac{3}{4}\text{ in.} D b l ank ​ ≈ ( 1.14 × OD ) + ( 2 × SF ) = ( 1.14 × 48.00 in. ) + ( 2 × 2.00 in. ) = 54.72 + 4.00 = 58.72 inches ≈ 58 – 4 3 ​ in.