Study guide

5.2 Gasket Materials, Flange Facings, Bolt Torque Sequences & Joint Assembly

NCCER Boilermaker Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Assessment, Boilermaker Craft, Safety, Tools & Crew Leadership

1.1 The NCCER Boilermaker Assessments: Format, Content Domains, Scoring & Credentials 1.2 Craft Fundamentals, Professional Roles & Industrial Safety 1.3 Confined Space Entry, Lockout/Tagout (LOTO) & Atmospheric Testing 1.4 Hand, Pneumatic, Electric & Hydraulic Boilermaker Tools 1.5 Crew Leadership, Job Planning, Production Tracking & Jobsite Communication

2 Chapter 2: Metallurgy, Base Materials, Oxyfuel, Air Carbon Arc & Plasma Cutting

2.1 Industrial Boiler Materials, Carbon & Alloy Steels, ASME Material Specs & Markings 2.2 Base Metal Surface Preparation, Joint Beveling & Fit-Up Cleanliness 2.3 Oxyfuel Cutting Principles, Equipment Setup, Torch Angles & Piercing Techniques 2.4 Air Carbon Arc Cutting and Gouging (CAC-A): Electrodes, Current, Air Supply, Technique & Defects 2.5 Plasma Arc Cutting (PAC): Torch Anatomy, Consumables, Gas Selection, Cut Quality & Safety

3 Chapter 3: Boiler Types, Steam Generation, Feedwater & Combustion Systems

3.1 Firetube Boiler Designs, Circulation Patterns & Operating Principles 3.2 Watertube Boiler Configurations, Natural & Forced Circulation, Drum Internals 3.3 Superheaters, Reheaters, Economizers & Air Heaters 3.4 Feedwater Systems, Deaerators, Condensate Return & Boiler Water Treatment 3.5 Combustion Systems: Burners, Stokers, Pulverizers, Fans & Draft Control

4 Chapter 4: Boiler Pressure & Nonpressure Components

4.1 Steam Drums, Mud Drums, Headers & Waterwalls 4.2 Nonpressure Components: Casing, Breeching, Baffles, Buckstays & Expansion Joints 4.3 Boiler Auxiliaries: Soot Blowers, Safety Valves, Gage Glasses & Blowdown Systems

5 Chapter 5: Valves, Gaskets, Fasteners, Anchors & Pipe Support Systems

5.1 Industrial Valve Types, Markings, Operation & Ratings 5.2 Gasket Materials, Flange Facings, Bolt Torque Sequences & Joint Assembly 5.3 Gasket Layout, Cutting & Fitting for Field-Made Gaskets 5.4 Fasteners, Anchors & Threaded Connection Hardware 5.5 Pipe Hangers, Supports, Rigid Restraints & Spring Can Installation/Adjustment

6 Chapter 6: Blueprint Reading, Welding Symbols & Construction Drawings

6.1 AWS Welding Symbols, Joint Geometry, Contours & NDE Designators 6.2 Piping Schematics, P&IDs, Isometric Drawings & Spool Sheets 6.3 Pressure Vessel General Arrangement, Detail Sheets, Coordinates & Elevations

7 Chapter 7: Trade Mathematics & Pipe Layout Calculations

7.1 Boilermaker Mechanical Trade Math: Offsets, Rolling Offsets & Travel Calculations 7.2 Vessel Volume, Surface Area, Circumference & Head Layout Computations 7.3 Mitered Turns, Segment Layout, Cutbacks & Branch Connections

8 Chapter 8: Pipe Fabrication - Socket Weld, Butt Weld, Threaded, Grooved & Spool Work

8.1 Pipe Materials, Nominal Pipe Size, Wall Schedules & Fitting Standards 8.2 Socket Weld Pipe Fabrication: The 1/16 in. Gap, Fillet Sizing & Cut Lengths 8.3 Butt Weld Pipe Fabrication: End Preparation, Alignment, Fit-Up & Cut Lengths 8.4 Pipe Layout Tools, Wrap-Arounds, Flange Squaring & Fabrication Tolerances 8.5 Threaded and Grooved Pipe Joining Systems 8.6 Spool Fabrication Workflow, Shop Versus Field Welds & Advanced Pipe Fabrication

9 Chapter 9: Tube Fabrication, Bending & Rolling

9.1 Boiler Tube Removal, Inspection, Wall Thinning & Replacement Criteria 9.2 Tube Preparation, Bending Radii, Ovality & Alignment Tolerances 9.3 Tube Expanding Mechanics, Rolling Torque Calculations, Wall Reduction & Flaring/Beading

10 Chapter 10: Welding Processes, Preheat & Stress Relieving

10.1 SMAW, GTAW & FCAW Welding Processes in Pressure Vessel Applications 10.2 Electrode Selection, Storage, Baking & AWS Filler Metal Classifications 10.3 Preheating Standards, Interpass Temperature Control & Post-Weld Heat Treatment (PWHT)

11 Chapter 11: Rigging Equipment, Hardware & Crane Operations

11.1 Rigging Hardware: Slings, Shackles, Eye Bolts & Inspection Criteria 11.2 Rigging Math: Sling Angles, Tension Calculations & Center of Gravity 11.3 Crane Signals, Load Charts, Boom Angle Deratings & Critical Lift Planning

12 Chapter 12: Towers, Heat Exchangers & Refractory/BRIL Systems

12.1 Shell-and-Tube Heat Exchangers: Bundles, Baffles & Floating Heads 12.2 Fractionation Towers, Trays, Downcomers, Packing & Vessel Hardware 12.3 Refractory Materials (Brick, Castable, Ceramic Fiber), Anchoring & Lagging (BRIL)

13 Chapter 13: ASME Codes, Quality Assurance, NDE, Pressure Testing & System Cleaning

13.1 ASME Boiler & Pressure Vessel Code (Sections I, VIII, IX) & NBIC Standards 13.2 Quality Control, Material Test Reports (MTRs), Weld Mapping & Traceability 13.3 Nondestructive Examination (NDE): VT, PT, MT, UT, RT & Discontinuity Evaluation 13.4 Hydrostatic and Pneumatic Testing Procedures, Safety Precautions & MAWP Validation 13.5 System Flushing, Chemical Cleaning, Boil-Out, Steam Blows & Service Leak Testing

5.2 Gasket Materials, Flange Facings, Bolt Torque Sequences & Joint Assembly

Key Takeaways Explain This Topic AI

Weld Neck (WN) flanges provide maximum structural integrity in high-pressure boiler piping, while Raised Face (RF) serrations bite into gaskets and Flat Face (FF) joints require full-face gaskets to prevent cracking cast-iron flanges.

Ring Type Joint (RTJ) flanges utilize precision octagonal or oval solid metallic rings (softer than flange grooves by 20–30 HB) to create high-integrity metal-to-metal seals in Class 900+ severe services.

ASME B16.20 spiral-wound gaskets require outer centering rings for bolt alignment and inner metallic rings to prevent inward winding collapse under bolt loads and turbulent flow.

High-temperature pressure piping bolting utilizes ASTM A193 Grade B7 alloy studs paired with ASTM A194 Grade 2H heavy hex nuts, with full thread engagement extending 2 to 3 threads past the outer nut face.

Flange makeup mandates a multi-pass crisscross star torque sequence (Pass 1: 20–30%, Pass 2: 50–60%, Pass 3: 100%, Pass 4: circular 100% check) using thread lubricants to stabilize the nut factor (k).

Last updated: August 2026

5.2 Gasket Materials, Flange Facings, Bolt Torque Sequences & Joint Assembly

Core Trade Concept: A bolted flanged joint is a complex mechanical system consisting of three interacting components: the flanges, the gasket, and the threaded studs. To maintain leak-tight containment under high hydrostatic pressure, intense thermal cycling, and external bending moments, the bolted joint must maintain a minimum compressive gasket seating stress ( y y y ) and operating gasket factor ( m m m ) without exceeding the yield strength of the flange hub or crushing the gasket element.

1. Industrial Flange Types & Pressure Classes (ASME B16.5 / B16.47)

Flanges provide demountable mechanical joints to connect pipe sections, valves, pumps, vessels, and heat exchangers. Flanges are categorized by attachment geometry and pressure rating classes ( Class 150, 300, 400, 600, 900, 1500, 2500 per ASME B16.5 for sizes up to NPS 24, and ASME B16.47 for NPS 26 to NPS 60). INDUSTRIAL FLANGE TYPES

  • WELD NECK (WN) SLIP-ON (SO) LAP JOINT (LJ)
  • +---+---+ +---+---+ +---+---+ +-- Stub End
  • | | | | | | | | | | Face
  • | | | +---+---+ | +---+--+---+
  • | | | | | Fillet | | | |
  • / \ | Butt / Pipe | Welds | | | Pipe |
  • / Hub \ | Weld +---------+ +---+---+ |
  • / \| | | | | | |
  • Flange Architecture Comparison

Flange Type Pipe Attachment Method Mechanical Stress & Fatigue Resistance Primary Trade Application

Weld Neck (WN) Full-penetration butt weld at end of tapered hub. Highest. Tapered hub transitions stress smoothly into pipe wall; resists severe bending and thermal fatigue. Mandatory on high-pressure superheated steam, boiler feedwater, and severe cyclic piping.

Slip-On (SO) Pipe slips inside flange bore; joined by two fillet welds (hub outside and bore inside). Moderate (approx. 1 3 \frac{1}{3} 3 1 ​ the fatigue life of a WN flange). Stress concentrates at inner fillet weld. Low-pressure cooling water, utility air, non-critical process lines ≤ Class 300 \le \text{Class } 300 ≤ Class 300 .

Lap Joint (LJ) Loose flange ring slips over pipe; mates with a factory-welded Stub End . Moderate; allows loose flange to rotate 360 ∘ 360^\circ 36 0 ∘ freely for easy bolt hole alignment. Stainless steel or titanium systems (flange ring can be cheap carbon steel while wetted stub is alloy).

Socket Weld (SW) Pipe inserts into counterbore socket and fillet-welded on outside hub. High for small diameters. Requires 1 16 in. \frac{1}{16}\text{ in.} 16 1 ​ in. bottom expansion gap before welding. Small bore high-pressure piping ( ≤ NPS 2 \le \text{NPS } 2 ≤ NPS 2 ) in chemical and power plants.

Threaded (Screwed) Screws onto NPT male pipe threads without welding. Low; threads create stress risers and leak paths under bending moments. Hazardous environments where hot work/welding is prohibited; low-pressure instrumentation.

Blind Flange Solid forged disc bolted across a flange opening. High hoop/bending stress at center of disc; functions as a pressure-retaining head. Line terminations, future tie-in nozzles, vessel manways, hydrostatic test blanks.

2. Flange Facings & Surface Finish Specifications

The flange facing is the machined contact surface that compresses the gasket to establish a fluid-tight seal. FLANGE FACING PROFILES

  • RAISED FACE (RF) FLAT FACE (FF) RING TYPE JOINT (RTJ)
  • +---+---+ +-------+ +---+---+ <- Gasket
  • | | | | | | |/ /| Groove
  • +--+ +---+--+ +--+ +--+ +--+ +---+--+ (Trapezoidal)
  • | | | | | | | | | | | | | |
  • | +---+---+ | | +-------+ | | +---+---+ |
  • | 1/16" or 1/4" (Full Contact Plane) (Solid Metallic Ring)
  • Facing Profiles

Raised Face (RF):

A raised annular lip concentrated inside the bolt circle.

Height: 1 16 in. \frac{1}{16}\text{ in.} 16 1 ​ in. ( 1.6 mm 1.6\text{ mm} 1.6 mm ) for Class 150 and 300; 1 4 in. \frac{1}{4}\text{ in.} 4 1 ​ in. ( 6.4 mm 6.4\text{ mm} 6.4 mm ) for Class 400 through 2500.

Surface Finish: Features a phonographic continuous spiral or concentric serrated groove profile with a roughness of 125 – 250 μ in. AARH 125\text{--}250\text{ }\mu\text{in. AARH} 125 – 250 μ in. AARH (Arithmetic Average Roughness Height). These serrations bite mechanically into the soft gasket filler, preventing radial gasket blowout under pressure.

Flat Face (FF):

The entire mating face lies in the same plane across the full diameter, with no raised central section.

Critical Trade Rule: Used on cast iron, bronze, and fiberglass equipment (pumps, valves, cast headers). Bolting a Raised Face flange to a Flat Face cast iron flange creates a high bending moment that cracks the brittle cast iron flange ear . Flat Face flanges require Full-Face Gaskets extending past the outer bolt holes.

Ring Type Joint (RTJ):

A precision-machined trapezoidal groove cut directly into the flange face inside the bolt circle.

Designed for extreme high-pressure/high-temperature services (Class 600 through 2500, up to 10,000 psi 10{,}000\text{ psi} 10 , 000 psi ).

Ring Cross-Sections:

Oval Rings (Legacy): Circular cross-section curve contacts flat 23 ∘ 23^\circ 2 3 ∘ groove walls at a single line contact.

Octagonal Rings (Modern Standard): Flat 45 ∘ 45^\circ 4 5 ∘ chamfered facets mate flatly against the 23 ∘ 23^\circ 2 3 ∘ groove angle, providing superior sealing contact area and carrying higher torque loads without sliding.

Hardness Rule: The metallic RTJ ring must be at least 20 to 30 Brinell Hardness points (HB) softer than the flange body to ensure the replaceable ring deforms elastically/plastically into the groove rather than indenting the permanent flange face.

3. Gasket Categories & ASME B16.20 Construction ASME B16.20 SPIRAL-WOUND GASKET (SWG) ANATOMY

  • +-------------------------------------------------------+
  • | 1. OUTER CENTERING RING (Solid Carbon Steel) |
  • | - Centers gasket on bolts; prevents over-crushing |
  • +-------------------------------------------------------+
  • | 2. SEALING ELEMENT (W-Shaped Metal + Soft Filler) |
  • | - Flexible Graphite or PTFE with 304/316 SS |
  • +-------------------------------------------------------+
  • | 3. INNER RETENTION RING (Solid Stainless/Alloy) |
  • | - Prevents inward buckling into pipe bore |
  • +-------------------------------------------------------+
  • Gasket Classifications

Non-Metallic (Sheet Gaskets per ASME B16.21):

Compressed Non-Asbestos Fiber (CNAF): Aramid/glass fibers bonded with nitrile rubber (NBR); rated up to 400 ∘ F 400^\circ\text{F} 40 0 ∘ F and Class 300 utility lines.

Expanded PTFE (Teflon): 100 % 100\% 100% virgin PTFE sheet; 100% chemically inert ( pH 0 – 14 \text{pH } 0\text{--}14 pH 0 – 14 ); rated up to 450 ∘ F 450^\circ\text{F} 45 0 ∘ F ; ideal for strong acids and corrosive chemicals.

Flexible Expanded Graphite Sheet: Pure exfoliated graphite flake ( 99 % C 99\%\text{ C} 99% C ); rated up to 900 ∘ F 900^\circ\text{F} 90 0 ∘ F in oxidizing environments ( 5,000 ∘ F 5{,}000^\circ\text{F} 5 , 00 0 ∘ F in inert/reducing atmosphere); excellent recovery and zero creep relaxation in high-temperature steam.

Semi-Metallic Gaskets (ASME B16.20):

Spiral-Wound Gaskets (SWG): The most common gasket in heavy power generation and refining. Composed of alternating V-shaped chevron metal strip windings (304SS, 316SS, Inconel, Monel) and soft filler (flexible graphite or PTFE).

Outer Centering / Gauge Ring: Solid painted carbon steel ring that positions the gasket precisely inside the flange bolts and acts as a positive mechanical travel stop to prevent over-compression of the windings.

Inner Ring: Solid stainless steel ring positioned between the inside diameter of the windings and the pipe bore. Inner rings are mandatory on all Class 900+ flanges, all vacuum lines, and all PTFE-filled spiral-wound gaskets to prevent the windings from buckling radially inward into the pipe bore under high bolt loads and turbulent fluid flow.

Kammprofile (Grooved Metal Core with Soft Facing): Solid serrated stainless steel core with flexible graphite or PTFE layers bonded to each face. Offers superior blowout resistance and requires lower seating stress than spiral-wound gaskets; standard for heat exchanger heads and large-diameter flanges.

Metallic Gaskets: Solid forged soft iron, low-carbon steel, 304SS, or 316SS RTJ rings stamped with ring numbers (e.g., R-24 , R-45 , RX , BX series for subsea).

4. Bolting Metallurgy & Fastener Specifications

Flange integrity relies on high-strength continuous threaded stud bolts (all-thread studs) and heavy hex nuts manufactured to precise ASTM metallurgical standards. HIGH-PRESSURE STUD ENGAGEMENT

  • +---------+ +---------+
  • | 2H Nut | | 2H Nut |
  • <== +---------+=====================+---------+ ==>
  • 2-3 Full Threads 2-3 Full Threads
  • Visible Past Nut Visible Past Nut
  • Fastener Metallurgy Breakdown

Fastener Component ASTM Specification Metallurgy & Heat Treatment Temperature Limits Minimum Tensile Strength

High-Temp Stud ASTM A193 Grade B7 AISI 4140/4142 Chromium-Molybdenum alloy steel, quenched and tempered. − 20 ∘ F to 800 ∘ F -20^\circ\text{F} \text{ to } 800^\circ\text{F} − 2 0 ∘ F to 80 0 ∘ F 125,000 psi 125{,}000\text{ psi} 125 , 000 psi ( 125 ksi 125\text{ ksi} 125 ksi )

Severe High-Temp Stud ASTM A193 Grade B16 Cr-Mo-Vanadium alloy steel for ultra-high temperature creep resistance. Up to 1,100 ∘ F 1{,}100^\circ\text{F} 1 , 10 0 ∘ F 125,000 psi 125{,}000\text{ psi} 125 , 000 psi

Stainless Stud ASTM A193 Grade B8 / B8M AISI 304 / 316 Austenitic Stainless Steel, carbide solution treated. − 320 ∘ F to 1,000 ∘ F -320^\circ\text{F} \text{ to } 1{,}000^\circ\text{F} − 32 0 ∘ F to 1 , 00 0 ∘ F 75,000 psi 75{,}000\text{ psi} 75 , 000 psi

High-Strength Nut ASTM A194 Grade 2H Carbon steel heavy hex nut, quenched and tempered. (Marked "2H"). Mates with B7 and B16 studs. Proof load 175 ksi 175\text{ ksi} 175 ksi

Stainless Nut ASTM A194 Grade 8 / 8M Heavy hex 304/316 Stainless Steel. (Marked "8" or "8M"). Mates with B8 / B8M studs. Proof load 75 ksi 75\text{ ksi} 75 ksi

Thread Engagement Rule

When fully torqued, the stud must extend through the outer nut face by a minimum of 2 to 3 full threads (or flush plus 1 4 in. \frac{1}{4}\text{ in.} 4 1 ​ in. ). If the stud does not extend past the outer face of the nut, the nut does not achieve full tensile load capacity, creating a severe blowout risk under pressure.

5. Controlled Bolting: Torque Patterns, Lubrication & Bolt Stretch STANDARD 8-BOLT CRISS-CROSS (STAR) TORQUE PATTERN

  • (1)
  • O O (8)
  • (5) O O (4)
  • (3) O O (6)
  • O O (7)
  • (2)
  • Sequence: 1 -> 2 -> 3 -> 4 -> 5 -> 6 -> 7 -> 8
  • The Physics of Torquing: T = k ⋅ D ⋅ F 12 T = \frac{k \cdot D \cdot F}{12} T = 12 k ⋅ D ⋅ F ​

Applied torque ( T T T , in ft-lbs \text{ft-lbs} ft-lbs ) is calculated using the standard short-form formula: T = k ⋅ D ⋅ F 12 T = \frac{k \cdot D \cdot F}{12} T = 12 k ⋅ D ⋅ F ​

Where:

  • T = T = T = Required torque wrench setting ( ft-lbs \text{ft-lbs} ft-lbs )
  • k = k = k = Nut factor / Friction factor (dimensionless)
  • D = D = D = Nominal stud bolt diameter (inches)

F = F = F = Target bolt preload / clamping tension (lbs, typically 50 % – 70 % 50\%\text{--}70\% 50% – 70% of stud yield strength)

The Impact of the Nut Factor ( k k k ) Friction Distribution: ≈ 50 % Nut Face Friction + ≈ 40 % Thread Friction + ≈ 10 % Useful Bolt Stretch \text{Friction Distribution: } \approx 50\% \text{ Nut Face Friction} + \approx 40\% \text{ Thread Friction} + \approx 10\% \text{ Useful Bolt Stretch} Friction Distribution: ≈ 50% Nut Face Friction + ≈ 40% Thread Friction + ≈ 10% Useful Bolt Stretch

Over 85 – 90 % 85\text{--}90\% 85 – 90% of applied wrench torque is consumed solely in overcoming friction! Only 10 – 15 % 10\text{--}15\% 10 – 15% produces actual bolt stretch (preload).

Nickel / Moly Anti-Seize Paste: k = 0.11 – 0.15 k = 0.11\text{--}0.15 k = 0.11 – 0.15 (consistent, low friction).

Light Machine Oil: k = 0.18 – 0.22 k = 0.18\text{--}0.22 k = 0.18 – 0.22 .

Dry / Rusty Steel Threads: k = 0.30 – 0.45 k = 0.30\text{--}0.45 k = 0.30 – 0.45 .

Critical Trade Scenario: Applying 300 ft-lbs 300\text{ ft-lbs} 300 ft-lbs of torque to a dry, unlubricated stud ( k = 0.35 k=0.35 k = 0.35 ) produces less than half the clamping force of the same torque applied to a lubricated stud ( k = 0.14 k=0.14 k = 0.14 ). An unlubricated flange will leak during hydrostatic testing even though the torque wrench clicked at full value!

ASME PCC-1 Multi-Pass Crisscross Bolting Procedure

Pre-Assembly Verification: Verify flange alignment. Maximum gap variation across the face must not exceed 1 16 in. \frac{1}{16}\text{ in.} 16 1 ​ in. ( 1.6 mm 1.6\text{ mm} 1.6 mm ), and bolt holes must align within 1 8 in. \frac{1}{8}\text{ in.} 8 1 ​ in. without forced drifting.

Clean & Lubricate: Clean stud and nut threads with a wire brush. Apply anti-seize lubricant liberally to all stud threads and the bearing face of the heavy hex nuts.

Pass 1 (Crisscross / Star Pattern): Tighten all studs in the numbered star pattern to 20 % – 30 % 20\%\text{--}30\% 20% – 30% of target torque to seat the gasket evenly.

Pass 2 (Crisscross / Star Pattern): Tighten all studs in the star pattern to 50 % – 60 % 50\%\text{--}60\% 50% – 60% of target torque .

Pass 3 (Crisscross / Star Pattern): Tighten all studs in the star pattern to 100 % 100\% 100% of target torque .

Pass 4 (Final Circular / Rotational Pass): Move sequentially clockwise around the flange, bolt-by-bolt, at 100 % 100\% 100% of target torque . Continue circular passes until no nut rotates , recovering all gasket creep relaxation.

Pass 5 (Optional Re-Torque): On high-temperature lines ( > 500 ∘ F > 500^\circ\text{F} > 50 0 ∘ F ), perform a final torque check at 100 % 100\% 100% torque after 4 to 24 hours of ambient relaxation or following an unpressurized thermal cycle per plant engineering specifications.

Direct Bolt Stretch Measurement (Ultrasonic Verification)

Torque wrenches measure rotational resistance, which is heavily distorted by thread friction. In critical high-pressure joints (reactor heads, turbine casings, main steam headers), boilermakers measure direct bolt elongation (stretch) using an ultrasonic bolt extensometer or precision micrometer: Δ L = F ⋅ L e f f A ⋅ E \Delta L = \frac{F \cdot L_{eff}}{A \cdot E} Δ L = A ⋅ E F ⋅ L e ff ​ ​

Where Δ L \Delta L Δ L is the measured physical stretch (typically 0.008 – 0.015 inches 0.008\text{--}0.015\text{ inches} 0.008 – 0.015 inches ), L e f f L_{eff} L e ff ​ is effective clamp length, A A A is root tensile area, and E E E is Young's Modulus ( 29.5 × 10 6 psi 29.5 \times 10^6\text{ psi} 29.5 × 1 0 6 psi for steel). Direct stretch measurement completely eliminates friction errors.