Study guide

20.2 Rough-Terrain Forklifts & Telehandlers: Stability Triangle & Load Charts

NCCER Heavy Equipment Operations Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: NCCER Credentials, Trade Orientation, Safety & Equipment Classification

1.1 NCCER Heavy Equipment Operations Credentials, Curriculum & Assessments 1.2 Heavy Equipment Industry & Operator Responsibilities 1.3 OSHA & MSHA Regulatory Standards (29 CFR 1926 & 30 CFR) 1.4 Machine Safety Systems: ROPS, FOPS, Seatbelts & Interlocks 1.5 Classifying Heavy Equipment: Machine Families, Mining Machines, Drive Systems & Hydraulics

2 Chapter 2: Pre-Operation Inspection & Preventative Maintenance

2.1 Walk-Around Inspection Procedures & Daily Checklists 2.2 Fluid Levels, Hydraulic Inspection & Filter Maintenance 2.3 Undercarriage, Tires, Tracks & Ground Engaging Tools (GET) 2.4 Engine Systems, Startup & Warm-Up, and Hybrid and Electric Equipment Readiness

3 Chapter 3: Safe Operating Practices & Site Hazards

3.1 Mounting, Dismounting (Three-Point Contact) & Cab Safety 3.2 Electrical Power Line Clearances & Overhead Hazards 3.3 Blind Spots, Swing Radii, Spotters & Hand Signals

4 Chapter 4: Refueling, Parking, Shutdown & Equipment Transport

4.1 Engine Cooldown, Safe Parking & Lockout/Tagout Procedures 4.2 Fueling Safety, Fire Prevention & Environmental Controls 4.3 Heavy Equipment Transport, Rigging & Securement / Tie-Down

5 Chapter 5: Excavator Types, Components & Hydraulics

5.1 Excavator Classifications, Tracked vs. Wheeled Configurations 5.2 House, Boom, Stick, Bucket & Hydraulic Flow Systems 5.3 Quick-Couplers, Attachments & Operational Safety

6 Chapter 6: Excavator Operations, Trenching & Lifting

6.1 Excavator Positioning, Travel & Stable Working Platforms 6.2 Trenching Techniques, Bench Cutting & Production Digging 6.3 Lifting Operations, Rigging Capacities & Load Charts

7 Chapter 7: Backhoe Loader Components & Controls

7.1 Backhoe Loader Anatomy: Loader End vs. Backhoe End 7.2 Operator Station, Pilot vs. Wobble Stick Controls & Instruments 7.3 Stabilizer Deployment, Machine Levelling & Setup on Slopes

8 Chapter 8: Backhoe Loader Operational Techniques

8.1 Backhoe Digging, Spoiling, Truck Loading & Cycle Efficiency 8.2 Front-End Loader Operations with Backhoe Loaders 8.3 Backhoe Road Travel, Transport Safety & Boom Locking

9 Chapter 9: Bulldozer Types, Powertrains & Blade Configurations

9.1 Crawler Dozer Classifications, Undercarriages & Ground Pressure 9.2 Drivetrains: Torque Converters, Powershift & Hydrostatic Drives 9.3 Blade Types: Straight (S), Universal (U), Semi-Universal (SU) & Angle Blades

10 Chapter 10: Bulldozer Earthmoving Operations

10.1 Straight Dozing, Slot Dozing & Production Pushing 10.2 Push-Loading Scrapers & Multi-Machine Earthmoving 10.3 Stockpiling, Berm Construction & Material Spreading

11 Chapter 11: Dozer Slope Work, Ripping & Clearing

11.1 Sidehill Operations, Working Up and Down Steep Slopes 11.2 Ripper Attachments: Single Shank, Multi-Shank & Ripping Techniques 11.3 Site Clearing, Tree Felling & Stumping Precautions

12 Chapter 12: Wheel Loaders & Track Loaders

12.1 Wheel Loader Anatomy, Articulated Steering & Z-Bar Linkage 12.2 Loading Patterns: V-Pattern, I-Pattern & Truck Placement 12.3 Excavation, Stockpile Management & Carry Operations

13 Chapter 13: Motor Grader Anatomy & Blade Geometry

13.1 Motor Grader Components: Tandem Drive, Articulation & Front Wheel Lean 13.2 Moldboard Mechanics: Pitch, Angle, Lift & Side-Shift 13.3 Grader Safety, Operating Speeds & Reversing Precautions

14 Chapter 14: Motor Grader Operations & Finish Grading

14.1 Ditching, Backsloping & Windrowing Techniques 14.2 Roadway Crown, Cross-Slope & Superelevation Creation 14.3 Fine Grading Tolerances, Blue Tops & Final Trimming

15 Chapter 15: Earthmoving Principles, Excavation Math, Soils & Planning

15.1 Soil Mechanics: Bank, Loose & Compacted Cubic Yards 15.2 Swell, Shrinkage & Load Factor Calculations 15.3 Slope Ratios, Percent Grade & Elevation Calculations 15.4 Soil Classification Systems (USCS & AASHTO) and Soil Effects on Equipment 15.5 Earthmoving Planning & Soil Stabilization Methods

16 Chapter 16: Civil Drawings, Staking, Layout, Pipe Laying & Machine Control

16.1 Reading Civil Engineering Site Plans, Contours & Profiles 16.2 Construction Stakes: Stationing, Offset, Cut & Fill Stakes 16.3 Laser Levels, GNSS/GPS Machine Control & 3D Telematics 16.4 Foundation Layout & Pipe Laying

17 Chapter 17: Soil Compaction Equipment & Methods

17.1 Principles of Soil Compaction & Optimum Moisture Content (Proctor Test) 17.2 Roller Types: Smooth Drum, Padfoot / Sheepsfoot, Pneumatic & Tamping 17.3 Lift Thickness, Pass Overlap & In-Place Density Testing

18 Chapter 18: OSHA 1926 Subpart P: Soil Classification & Cave-In Protection

18.1 OSHA Soil Mechanics: Type A, Type B & Type C Classification 18.2 Cave-In Protection Systems: Sloping, Benching, Shoring & Shielding 18.3 Duties of the OSHA Competent Person & Daily Trench Inspections

19 Chapter 19: Excavation Site Hazards & Underground Utilities

19.1 Utility Locating (811 Call Before You Dig) & Potholing Procedures 19.2 Safe Access, Egress (Ladders/Ramps) & Hazardous Atmospheres 19.3 Surface Water Diversion, Dewatering & Backfilling Requirements

20 Chapter 20: Specialized Equipment: Compact Loaders, Forklifts, Haulers & Tractors

20.1 Skid-Steer Loaders & Compact Track Loaders (CTLs): Controls & Stability 20.2 Rough-Terrain Forklifts & Telehandlers: Stability Triangle & Load Charts 20.3 Scrapers, Off-Road Articulated Dump Trucks & Utility Tractors 20.4 Dump Trucks: On-Road and Off-Road Operation 20.5 Utility Tractors: ROPS, Overturn Prevention, Ballast & Implement Hookup 20.6 Conventional (Sit-Down Counterbalanced) Forklifts

20.2 Rough-Terrain Forklifts & Telehandlers: Stability Triangle & Load Charts

Key Takeaways Explain This Topic AI

Class 7 rough-terrain forklifts and variable-reach telehandlers rely on the stability triangle—a three-point structural polygon formed between the two front drive wheels and the center pivot trunnion of the rear steering axle.

As a telehandler boom extends forward and elevates, the combined center of gravity (machine mass plus payload) shifts forward and upward; if the center of gravity crosses the front axle tipping line, catastrophic forward tip-over occurs.

Load charts establish strict capacity envelopes based on boom extension distance, boom angle in degrees, and stabilizer outrigger deployment, usually based on a 24-inch load center measured from the vertical face of the forks.

Frame sway leveling must always be completed on the chassis level gauge before elevating the boom; when traversing slopes with a load, the mast or boom must always point uphill (drive forward ascending, drive in reverse descending).

Last updated: October 2026

  • Rough-Terrain Forklifts & Telehandlers: Stability Triangle & Load Charts
  • Material Handling Equipment Classification: Class 7 Forklifts & Variable-Reach Telehandlers

Material handling across unimproved, rough, and muddy construction sites requires specialized lifting equipment engineered to traverse severe terrain while maintaining heavy loads in elevated positions. OSHA regulates these machines as powered industrial trucks (29 CFR 1926.602(c) and (d), which adopts the operator-training rules of 1910.178(l)), and the Industrial Truck Association's classification system places them in Class 7: Rough-Terrain Forklift Trucks . Within Class 7, two distinct machine designs dominate commercial and civil construction:

Vertical Mast Rough-Terrain Forklifts : Built on a heavy, rigid tractor-style chassis equipped with large-diameter front drive tires and smaller rear steering tires. These machines utilize a heavy vertical steel mast equipped with hydraulic lift cylinders, leaf hoist chains, and forward/backward mast tilt cylinders. While highly effective for moving palletized block, lumber, and pipe across rutted jobsites, their lifting envelope is strictly vertical; to place a load onto an elevated floor or scaffold, the machine must drive directly up to the edge of the building.

Variable-Reach Telehandlers (Telescopic Handlers) : Often referred to as "reach forklifts" or telehandlers, these machines combine the lifting capacity of a forklift with the outreach reach of a mobile crane. Telescopic handlers feature a multi-section telescoping boom pinned to the extreme rear frame of the chassis. Controlled by hydraulic hoist cylinders and internal telescoping extension cylinders (or heavy extension chains), the boom reaches upward and forward over obstacles, foundation walls, and scaffold decks. Telehandlers feature four-wheel drive, three selectable steering modes (two-wheel front steer, four-wheel coordinated round steer for tight turns, and crab steer for diagonal positioning along trenches), hydraulic fork tilt, frame sway leveling, and front hydraulic stabilizer outriggers.

Physics of the Stability Triangle and Dynamic Center-of-Gravity Shifts

To operate rough-terrain forklifts and telehandlers safely, equipment operators must master the physical principles that govern machine equilibrium. The foundational concept is the Stability Triangle .

Geometry of the Stability Triangle

Although a forklift or telehandler has four wheels contacting the ground, the machine does not possess a four-point square stability base. The front drive axle is bolted rigidly to the chassis frame, establishing two solid base points at the center of the left and right front tire footprints. However, the rear steering axle is mounted to the chassis frame via a central pivot trunnion pin. This center pivot allows the entire rear axle assembly to oscillate freely up and down over uneven terrain, ensuring all four tires maintain ground contact.

Because the rear axle pivots freely at this single center point, it provides zero lateral structural resistance against vehicle tipping at the rear tires. Consequently, the machine's true geometric base of stability is a three-point triangle : the two front tire contact patches form the base of the triangle (and the front tipping axis or fulcrum line), while the central pivot pin of the rear oscillating axle forms the apex of the triangle. The lines connecting the front tires to the rear axle pivot pin represent the lateral tipping axes.

Center of Gravity Mechanics and Combined Center of Gravity

Every machine has a Center of Gravity (CG)—the single point about which all structural gravitational mass is balanced:

Unloaded Condition : When the telehandler is unloaded with its boom lowered and fully retracted, the machine's Center of Gravity sits low to the ground and well toward the rear, near the heavy diesel engine and cast-steel counterweight. The CG resides comfortably within the wide portion of the stability triangle.

Loaded Condition : When the forks pick up a payload (such as a 6,000-pound cube of masonry brick), a new Combined Center of Gravity is created. This combined CG represents the composite balance point between the mass of the empty machine and the mass of the suspended payload. The location of the combined CG shifts dynamically based on load weight, boom elevation angle, and boom telescopic extension length.

Longitudinal and Lateral Rollover Hazards

As the telehandler boom elevates, the combined CG moves upward. As the boom extends horizontally forward, the combined CG moves forward toward the front tipping axis. Machine balance follows strict geometric rules:

Longitudinal (Forward) Tip-Over : If an operator extends a heavy load too far forward, the combined CG travels forward past the front axle tipping axis. The front axle becomes a fulcrum lever: the rear oscillating axle lifts completely off the grade, and the machine tips violently forward onto its front wheels or fork carriage.

Lateral (Sideway) Rollover : Because the stability triangle tapers from the wide front axle to a narrow point at the rear trunnion pin, the lateral margins of safety shrink drastically as the combined CG moves upward. If an operator raises a load with the chassis tilted even slightly to one side, or executes a turn with the boom elevated, centrifugal and gravitational forces push the elevated combined CG outside the narrow lateral boundary lines of the stability triangle, causing an instantaneous, catastrophic lateral rollover.

Load Center Distance and Standard 24-Inch Rating

The lifting capacity stamped on a machine's data plate does not represent a static, universal weight limit; it is strictly dependent on the Load Center Distance .

Defining Load Center Distance

Load Center Distance is the horizontal distance measured from the vertical face of the fork heel (the 90-degree bend where the horizontal tines meet the vertical shank) forward to the center of gravity of the payload being carried. Under ANSI/ITSDF B56.6 and common industry practice, the rated capacity of most rough-terrain forklifts and telehandlers is stated at a 24-inch (600 mm) load center (very large trucks may be rated at 36 or 48 inches, so check the capacity plate).

A 24-inch load center corresponds to a uniformly distributed 48-inch by 48-inch cubical pallet load, where the payload's center of gravity resides precisely at the geometric midpoint (24 inches from the front, back, and sides).

The Physics of Extended Load Centers

When handling non-standard materials—such as long trusses, structural steel wide-flange beams, 10-foot-wide drywall bundles, or machinery crates—the payload's center of gravity often sits significantly further out than 24 inches from the fork heel. The fundamental law of levers states that tipping moment equals force multiplied by distance ( M = F × D M = F \times D M = F × D ):

If a 6,000-pound telehandler picks up a standard 48-inch pallet, the load center is 24 inches. The forward tipping moment generated by the load against the fork carriage is: M = 6,000 lbs × 24 in. = 144,000 in-lbs M = 6{,}000\text{ lbs} \times 24\text{ in.} = 144{,}000\text{ in-lbs} M = 6 , 000 lbs × 24 in. = 144 , 000 in-lbs

If that same telehandler picks up an 8-foot-deep (96-inch) crate weighing 6,000 pounds, the load's center of gravity sits at 48 inches from the fork heel. The resulting tipping moment is: M = 6,000 lbs × 48 in. = 288,000 in-lbs M = 6{,}000\text{ lbs} \times 48\text{ in.} = 288{,}000\text{ in-lbs} M = 6 , 000 lbs × 48 in. = 288 , 000 in-lbs

Even though the scale weight (6,000 lbs) has not changed, the tipping leverage exerted on the machine has doubled . Carrying an extended load center drastically derates the machine's safe lifting capacity. Always use the manufacturer's capacity plate or load chart for the actual load center. When none is available, a quick and conservative estimate of the safe derated capacity ( C safe C_{\text{safe}} C safe ​ ) is:

C safe = Rated Capacity × ( Standard Load Center (24 in.) Actual Load Center ) C_{\text{safe}} = \text{Rated Capacity} \times \left( \frac{\text{Standard Load Center (24 in.)}}{\text{Actual Load Center}} \right) C safe ​ = Rated Capacity × ( Actual Load Center Standard Load Center (24 in.) ​ )

(The simple ratio is conservative because it ignores the distance from the front axle to the fork face.) Attempting to lift full rated capacity when the load center is extended will overload the front axle, breach hydraulic relief limits, and precipitate immediate forward tipping.

Reading Telehandler Load Charts and Outrigger Deployment

Unlike traditional forklifts that feature a single maximum lifting rating, a variable-reach telehandler possesses a dynamic lifting envelope. OSHA requires lift trucks to have their rated capacity clearly posted where the operator can see it (1926.602(c)(1)(i)), and telehandler manufacturers supply Load Charts for each machine configuration and attachment; always use the chart that matches the attachment installed.

Elements of a Telehandler Load Chart

A standard telehandler load chart displays a two-dimensional grid representing the machine's reach envelope:

Horizontal Axis : The horizontal distance (in feet) measured from the front tires forward to the load center on the forks.

Vertical Axis : The vertical elevation (in feet) measured from ground level up to the fork carriage.

Boom Angle Arc Lines : Curved radial lines radiating from the rear boom pivot representing the boom angle in degrees (e.g., -5°, 0°, 20°, 40°, 60°, 70°). The operator monitors this angle via an external mechanical pendulum indicator mounted on the side of the boom arm or via an electronic dashboard display.

Boom Extension Letter Zones : Concentric arcs representing the telescopic extension of the boom, labeled with letters (A, B, C, D) or color bands. Corresponding letter markings are painted directly on the telescoping boom sections, allowing the operator to view the exact extension point from the cab window.

Capacity Zones : Stepped contour zones on the chart enclosing specific maximum weight ratings (e.g., 9,000 lbs, 6,000 lbs, 4,000 lbs, 2,000 lbs). The intersection of the boom angle line and boom extension letter identifies the precise maximum allowable payload for that specific geometric coordinate.

Stabilizer Outrigger Deployment

Many telehandlers are equipped with dual front-mounted hydraulic outriggers (stabilizers). Telehandler operator manuals provide separate load charts for "On Tires" (free-on-wheels) and "On Outriggers" :

On Tires Rating : The machine relies entirely on its pneumatic or foam-filled tires for ground support. Capacities are significantly restricted, particularly at long horizontal reaches, because tire sidewall deflection creates chassis tilting and reduces tipping resistance.

On Outriggers Rating : The operator lowers the heavy steel outrigger pads firmly onto stable ground, lifting the front tires slightly to transfer machine mass directly onto the rigid steel outrigger legs. Deploying outriggers shifts the front tipping fulcrum forward, widens the front stance, eliminates tire sidewall deflection, and dramatically expands the machine's rated capacity envelope, frequently doubling permissible payloads at high reach.

Before picking up a load, the operator must determine the gross weight of the payload, find the required placement elevation and horizontal reach on the building structure, identify the corresponding boom angle and extension letter, and verify on the load chart that the payload weight is within the allowable capacity zone for the machine's current stabilizer configuration.

Chassis Frame Leveling (Sway Control) and Tire Pressure Mechanics

Maintaining the machine chassis in a true horizontal plane is essential for lateral stability. Telehandlers feature an electro-hydraulic Frame Sway Leveling System utilizing a heavy double-acting hydraulic cylinder mounted between the front axle housing and the main chassis frame. This cylinder allows the operator to rotate the chassis frame up to ±10 degrees laterally relative to the front axle.

The Mandatory Rule of Frame Leveling

Frame sway leveling is engineered to compensate for uneven ground slopes, ensuring that the boom elevates in a true vertical plane perpendicular to gravity. However, operators must strictly adhere to the fundamental operating rule:

Level the frame only with the boom retracted and lowered, as the operator's manual specifies. NEVER level the frame with the boom or load elevated.

When a boom carrying several thousand pounds is extended 30 to 50 feet into the air, activating the frame leveling control induces severe dynamic lateral inertia. Tilting the chassis even 2 degrees with an elevated load causes the tip of the boom to swing through a wide horizontal arc. This sudden lateral weight shift instantly drives the combined center of gravity outside the narrow stability triangle, rolling the telehandler over on its side before the operator can release the joystick. Operators must check the cab spirit level (bubble gauge) or digital inclinometer to verify that the chassis is 100% level before elevating any load.

Tire Pressure and Ballast Stability Mechanics

Tire condition directly governs telehandler stability. Class 7 rough-terrain forklifts utilize heavy-ply industrial tires inflated to high working pressures (typically 60 to 90 psi). A pressure deficit of just 10 to 15 psi in one front tire will cause that tire to compress significantly under load. When a boom is raised 40 feet in the air, a 2-inch drop on one front tire tilts the machine about 1.5 degrees and shifts the boom head roughly a foot sideways, moving the load's center of gravity toward the edge of the stability triangle. Daily pre-operational inspections must verify tire inflation pressures with an accurate gauge. To permanently eliminate puncture risks and ensure unyielding tire sidewall rigidity, many contractors mandate polyurethane foam-filled tires or solid rubber tires for all telehandlers operating on civil and commercial sites.

Slope Travel Protocols with Loads

Traversing grades and ramps with a rough-terrain forklift or telehandler requires strict compliance with gravity directional travel rules:

The Fundamental Rule of Slope Travel

When transporting a payload on any ramp, slope, or incline, the heavy end of the machine must always face uphill, which dictates that the load must ALWAYS point uphill :

Ascending a Slope with a Load : Travel in FORWARD gear, facing up the incline with the forks pointing uphill.

Descending a Slope with a Load : Travel in REVERSE gear, backing down the incline with the forks pointing uphill.

Physics of Downhill Nose-Overs

If an operator drives forward down a steep incline with a loaded forklift, gravitational force tilts the combined center of gravity forward toward the front axle. As the machine brakes or hits a depression, the combined CG shifts entirely ahead of the front axle tipping line. The rear steering tires lift off the ground, causing complete loss of steering control and throwing the machine into an uncontrollable downhill forward rollover (nose-over). Keeping the load facing uphill ensures that payload mass is transferred rearward onto the oscillating axle, maintaining firm four-wheel ground contact, steering authority, and balanced brake distribution.

Travel Height and Cross-Slope Prohibition

When traveling across a jobsite, whether on flat ground or slopes, the boom must always be fully retracted and carried low , with the forks positioned 12 to 18 inches above the ground, tilted back slightly to cradle the load. Operating or traveling with an elevated boom raises the combined CG to lethal rollover heights. Furthermore, operators must NEVER travel diagonally across a slope or turn on a hillside . Traversing across a slope tilts the stability triangle sideways; hitting a minor rut or depression will instantly roll the machine over.

Technical Comparison: Telehandler Stability Factors, Slope Rules & Load Chart Interpretation

Operational Feature On Tires (Free-on-Wheels) On Outriggers (Stabilizers Deployed) Traveling Ascending Slope Traveling Descending Slope

Tipping Fulcrum Line Center of front tire contact patches Pivot pads of front outrigger legs Front axle / uphill wheels Front axle / downhill wheels

Lateral Stability Base Three-point stability triangle Expanded polygon; outrigger stance Stability triangle shifted rearward Stability triangle shifted forward

Tire Deflection Influence High; sidewall flex induces frame tilt Zero; weight transferred off tires Moderate; requires equal tire pressure Extreme; dangerous forward load shift

Permissible Load Capacity Restricted; lower at maximum reach Maximum; high outreach envelope Low travel carry height only Low travel carry height only

Mandatory Travel Direction N/A (Stationary pick/place) N/A (Stationary pick/place) Drive FORWARD (load uphill) Drive REVERSE (load uphill)

Boom Position During Move Retracted; 12 to 18 in. carry height Strictly prohibited while traveling Retracted; 12 to 18 in. carry height Retracted; 12 to 18 in. carry height

Frame Leveling Protocol Level chassis before raising boom Level chassis before deploying legs Leveling locked during travel Leveling locked during travel

Field Operational Scenario: Three-Story Masonry Pallet Placement

On an institutional university construction site, a masonry contractor is constructing an exterior load-bearing concrete block wall. The project requires placing cubes of 8-inch architectural masonry block onto a third-story exterior scaffolding landing deck. The landing deck is located at an elevation of 32 feet above the ground, and due to an open utility trench along the building footing, the telehandler must park so its front tires are 18 feet away from the building face.

The contractor assigns a 10,000-lb capacity variable-reach telehandler to stage the material. The block supplier delivers pallets of concrete block labeled with a certified gross shipping weight of 3,600 pounds per pallet. The pallets are standard 48-inch by 48-inch cubes, establishing a standard 24-inch load center from the fork heel.

The certified telehandler operator executes the placement following strict stability and engineering procedures:

Pad Setup and Inspection : The operator selects a firm, level area clear of the backfilled trench. Soil compaction is verified, and heavy 24-inch square hardwood timber outrigger pads are positioned beneath the outrigger locations to distribute bearing pressure over the subgrade.

Stabilizer Deployment and Chassis Leveling : Before extending the boom, the operator checks the cab spirit level. The chassis indicates a 3-degree lateral slope. With the boom fully lowered and retracted, the operator engages the frame sway leveling control, rotating the chassis until the bubble sits dead-center in the level gauge. Next, the operator deploys the front hydraulic outriggers, lowering the legs firmly onto the timber pads until the front tires are relieved of chassis weight.

Load Chart Verification : The operator calculates the geometry: landing deck elevation is 32 feet; horizontal reach distance from front tires to the scaffold deck center is 18 feet. Cross-referencing the telehandler's mounted "On Outriggers" load chart, the 32-foot elevation line intersects the 18-foot reach line at a required boom angle of 58 degrees and Boom Extension Letter "C". On the load chart, this coordinate falls squarely inside the 4,000-lb capacity zone.

Margin of Safety Evaluation : The 3,600-lb pallet is within the 4,000-lb chart limit, providing a 400-lb safety margin. (The operator notes that on the "On Tires" chart, the capacity at this coordinate is only 2,000 lbs; attempting the pick without outriggers would have resulted in catastrophic forward tipping).

Execution of the Lift : The operator inserts the 48-inch forks fully beneath the pallet until the pallet contacts the vertical fork heel. The pallet is lifted 12 inches off the ground and tilted back. With outriggers set and frame level, the operator smoothly raises the boom to 58 degrees, then extends the telescoping sections to mark "C". The pallet glides smoothly over the scaffold guardrail, where the operator levels the forks and gently sets the pallet onto the landing deck before retracting the boom in reverse sequence.