Study guide

7.1 Bearing Types, Designations, and Selection

NCCER Industrial Maintenance Mechanic Exam

Track your progress as you read

Finished sections get a check mark.

1 The NCCER Industrial Maintenance Mechanic Assessment

1.1 The IMM Journey-Level Credential and Assessment Specification 1.2 The Nine Content Domains: Item Counts and a Study Plan

2 Industrial Maintenance Mechanic Fundamentals

2.1 Safety Programs, PPE, and Hazard Communication 2.2 Hazardous Energy Control: Lockout/Tagout and Confined Space Entry 2.3 Tools of the Trade: Hand and Power Tools 2.4 Oxyfuel Cutting: Equipment, Safe Setup, and Cutting Practice 2.5 Ferrous Metal Piping Practices: Cutting, Threading, and Joining

3 Rigging and Mobile Equipment

3.1 Slings, Rigging Hardware, and Inspection Criteria 3.2 Load Weight, Center of Gravity, Sling Angle, and Hand Signals 3.3 Mobile and Support Equipment: Forklifts, Aerial Lifts, and Mobile Cranes

4 Craft Mathematics, Layout, and Precision Measurement

4.1 Craft-Related Mathematics: Fractions, Units, Area, and Volume 4.2 Advanced Trade Math: Right Triangles, Trigonometry, and Pipe Offsets 4.3 Basic Layout: Squaring, Leveling, and Transferring Elevations 4.4 Precision Measuring Tools: Micrometers, Verniers, and Dial Indicators 4.5 Gauges, Tolerances and Fits, and Torque Measurement

5 Construction Drawings and Blueprint Reading

5.1 Reading Construction Drawings: Views, Lines, Scales, and the Title Block 5.2 Orthographic, Isometric, Arrangement, and Foundation Drawings 5.3 Advanced Blueprint Reading: P&IDs, Instrument Tags, and Welding Symbols

6 Valves, Packing, and Mechanical Seals

6.1 Valve Types and Service Selection 6.2 Valve Construction, Markings, Pressure Classes, and Actuators 6.3 Removing and Installing Valves: Flange Bolting and Torque Sequence 6.4 Valve Maintenance: Packing, Stuffing Boxes, Gaskets, and O-Rings 6.5 Hydrostatic and Pneumatic Testing of Piping and Equipment 6.6 Mechanical Seals: Components, Types, and Installation

7 Bearings, Lubrication, and Couplings

7.1 Bearing Types, Designations, and Selection 7.2 Bearing Lubrication, Handling, and Failure Analysis 7.3 Removing and Installing Bearings: Fits, Heating, and Mounting 7.4 Couplings: Types, Selection, and Installation

8 Pumps, Baseplates, and Mechanical Drives

8.1 Pumps and Drivers: Centrifugal and Positive Displacement 8.2 Setting Baseplates and Soleplates: Leveling, Anchoring, and Grouting 8.3 Prealignment: Soft Foot, Runout, Pipe Strain, and Shims 8.4 Installing Belt and Chain Drives

9 Shaft Alignment: Conventional, Reverse, and Laser

9.1 Conventional Rim-and-Face Dial Indicator Alignment 9.2 Reverse Dial Indicator Alignment 9.3 Laser Shaft Alignment Systems

10 Maintenance Troubleshooting: Method, Pumps, and Gearboxes

10.1 Systematic Troubleshooting and Root Cause Analysis 10.2 Troubleshooting and Repairing Pumps 10.3 Troubleshooting and Repairing Gearboxes

11 Steam Systems, Boilers, and Process Vessels

11.1 Low-Pressure Steam Systems, Traps, and Condensate Return 11.2 High-Pressure Steam Generation and Boiler Auxiliaries 11.3 Distillation Towers, Vessels, and Internals

12 Compressors and Pneumatic Systems

12.1 Air Compressor Types, Operation, and Maintenance 12.2 Compressed Air Treatment, Storage, and Distribution 12.3 FRL Units, Pneumatic Valves, Actuators, and Speed Control

7.1 Bearing Types, Designations, and Selection

Key Takeaways Explain This Topic AI

A plain journal bearing supports the shaft on a hydrodynamic oil film, while a rolling element bearing separates the rings with balls or rollers.

In a metric bearing part number, bore codes 00, 01, 02, and 03 mean 10, 12, 15, and 17 mm, and codes 04 and above are multiplied by 5 to get the bore in millimeters.

Ball bearings carry lighter loads at higher speeds; roller bearings carry heavier loads because they contact along a line rather than at a point.

Spherical roller and self-aligning ball bearings tolerate shaft misalignment; cylindrical and tapered roller bearings do not.

A C3 internal clearance bearing has more clearance than standard and is specified where an interference fit or elevated temperature would close a normal clearance too far.

Last updated: September 2026

Two families of bearing

Domain 6, Bearings and Coupling , contributes 12 of 115 items across modules 32207 Introduction to Bearings , 32303 Installing Bearings , and 32304 Installing Couplings .

A bearing supports a load while permitting relative motion. Industrial practice splits into two families:

Plain (journal or sleeve) bearings carry the shaft on a hydrodynamic film of oil. At rest the shaft sits on the bearing; as it turns, it drags oil into a converging wedge that lifts it off the surface. The film — not the metal — carries the load. Common linings are babbitt , a soft tin or lead alloy that embeds contaminants and protects the shaft.

Rolling element bearings put balls or rollers between hardened rings so that sliding friction becomes rolling friction. Starting torque is far lower, so they dominate motor, pump, and gearbox applications.

  • Property Plain bearing Rolling element bearing
  • Starting friction High until the film forms Low
  • Load capacity for a given size Very high Moderate
  • Shock tolerance Excellent Moderate
  • Speed capability Very high with proper lubrication Limited by cage and lubricant
  • Lubrication dependence Absolute — film loss is immediate failure High, but grease retains some protection
  • Noise and damping Quiet, damps vibration Noisier, transmits vibration
  • Replacement Reline or replace shell Replace the bearing
  • Rolling element types
  • Type Contact Load direction Misalignment tolerance
  • Deep groove ball Point Radial plus some thrust Low
  • Angular contact ball Point at an angle Combined radial and one-direction thrust Low
  • Self-aligning ball Point, spherical outer race Radial, light thrust High
  • Cylindrical roller Line Heavy radial only; allows axial float Very low
  • Tapered roller Line Heavy radial and heavy thrust Low
  • Spherical roller Line, spherical outer race Very heavy radial and thrust High
  • Needle roller Line, small section Heavy radial in a small envelope Very low
  • Thrust ball / thrust roller Axial Thrust only Low

The organizing idea: point contact means lower load and higher speed; line contact means higher load and lower speed. A ball touches its race at essentially a point, so the stress is concentrated but the friction is small. A roller touches along a line, spreading the load over far more area.

The second organizing idea: only the spherical designs tolerate misalignment. A self-aligning ball bearing and a spherical roller bearing both have a spherical outer raceway, so the inner assembly can swivel. Put a cylindrical roller bearing on a misaligned shaft and it will fail in weeks.

Reading a metric designation

A number like 6208-2RS C3 decodes as follows:

  • Position Example Meaning
  • First digit — type 6 Single-row deep groove ball bearing
  • Second digit — dimension series 2 Width and outside diameter series (load capacity)
  • Last two digits — bore code 08 Bore size
  • Suffix — closure 2RS Contact seals on both sides (ZZ or 2Z means shields)
  • Suffix — clearance C3 Internal clearance greater than normal

The bore code rule:

  • Bore code Bore
  • 00 10 mm
  • 01 12 mm
  • 02 15 mm
  • 03 17 mm
  • 04 and above code × 5 mm

So a 6208 has a bore of 8 × 5 = 40 mm , and a 6312 has a bore of 12 × 5 = 60 mm . Codes below 04 are the memorized exceptions.

Internal clearance

Internal clearance is the amount the inner ring can move relative to the outer before load is applied. Codes run C2 (less than normal), CN or unmarked (normal), C3, C4, and C5 (progressively greater).

Clearance is consumed at assembly and in service:

Pressing the inner ring onto an interference fit expands it and closes clearance.

Running temperature raises the inner ring hotter than the outer, which expands it more and closes clearance further.

That is why C3 is standard for electric motors and for any bearing with a heavy interference fit or a hot running condition: the extra cold clearance ends up as correct operating clearance. Installing a normal-clearance bearing where C3 is specified preloads it and drives the temperature up until it fails.

Selecting a bearing

Match four things: load magnitude and direction , speed , misalignment present in the machine , and environment .

Pure radial load, moderate speed, small misalignment: deep groove ball.

Heavy radial load, no thrust, need for axial float at one end: cylindrical roller.

Combined heavy radial and thrust: tapered roller or spherical roller.

Shaft that deflects or a housing that cannot be bored in line: spherical roller or self-aligning ball.

Contaminated or wet environment: sealed (2RS) rather than shielded (2Z), and consider a design with a slinger or labyrinth.

Bearings are also arranged in a pair: one fixed (locating) bearing that takes thrust and positions the shaft, and one free (floating) bearing that allows the shaft to grow thermally. Locking both ends axially preloads the bearings as the shaft heats and expands — a very common cause of premature failure in a rebuilt machine.