Study guide

0.1 About the NCCER Millwright Certification

NCCER Millwright Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction

0.1 About the NCCER Millwright Certification 0.2 How to Use This Study Guide

2 Chapter 1: Hand & Power Tools, Cutting

1.1 Millwright Hand Tools 1.2 Millwright Power Tools 1.3 Oxyfuel Cutting

3 Chapter 2: Trade Math, Blueprints & Precision Layout

2.1 Craft-Related Mathematics 2.2 Reading Mechanical Drawings 2.3 Basic Layout 2.4 Precision Measuring Tools

4 Chapter 3: Bearings & Fasteners

3.1 Fasteners and Anchors 3.2 Introduction to Bearings 3.3 Removing and Installing Bearings

5 Chapter 4: Packing, Seals & Gaskets

4.1 Gaskets and Packing 4.2 O-Rings and Non-Mechanical Seals 4.3 Mechanical Seals

6 Chapter 5: Installation Fundamentals — Baseplates, Soleplates & Rigging

5.1 Setting Baseplates and Soleplates 5.2 Rigging Practices

7 Chapter 6: Drives, Conveyors & Gearboxes

6.1 Installing Belt and Chain Drives 6.2 Introduction to Conveyors 6.3 Gearboxes

8 Chapter 7: Pumps, Lubrication & Pump Troubleshooting

7.1 Introduction to Pumps 7.2 Troubleshooting and Repairing Pumps 7.3 Lubrication

9 Chapter 8: Conveyor & Gearbox Troubleshooting, Preventive Maintenance

8.1 Troubleshooting and Repairing Conveyors 8.2 Troubleshooting and Repairing Gearboxes 8.3 Preventive and Predictive Maintenance

10 Chapter 9: Alignment Fundamentals & Dial Indicator Methods

9.1 Couplings and Alignment Fundamentals 9.2 Prealignment and Shim Fabrication 9.3 Dial Indicator Alignment

11 Chapter 10: Advanced Alignment, Laser Methods & Compressor Maintenance

10.1 Laser Alignment 10.2 Optical Layout and Alignment 10.3 Compressors and Compressor Maintenance

12 Chapter 11: Hydraulics & Pneumatics

11.1 Basic Pneumatic Systems 11.2 Basic Hydraulic Systems 11.3 Troubleshooting and Repairing Hydraulic Equipment

0.1 About the NCCER Millwright Certification

Key Takeaways Explain This Topic AI

The NCCER Millwright exam (AEN15MLWR05) has 125 multiple-choice questions, all scored, with a 3-hour time limit.

Seven official domains carry these weights: Millwright Fundamentals (19.2%), Bearings/Fasteners (8.0%), Packing/Seals/Gaskets (8.0%), Equipment Installation (14.4%), Maintenance/Troubleshooting (20.8%), Alignment (20.8%), Hydraulics/Pneumatics (8.8%).

Passing score is a scaled 75, not a raw percentage.

Module 15406 (Compressors and Compressor Maintenance) is officially scored under Alignment, not Maintenance and Troubleshooting.

The credential never expires once earned -- it's recorded permanently on the NCCER National Registry.

Last updated: July 2026

Why the NCCER Millwright Certification Matters

The NCCER Millwright certification validates that a technician has mastered the National Center for Construction Education and Research's Industrial Millwright curriculum -- the standard training pathway for millwrights across manufacturing, power generation, oil and gas, and heavy-industrial employers throughout North America. Unlike a state license, the NCCER credential is a portable, employer-recognized certification verified through NCCER's National Registry, which employers can check directly rather than relying on a paper certificate.

Exam Format at a Glance

  • Detail Information
  • Assessment Code AEN15MLWR05 ("Industrial Millwright")
  • Number of Questions 125 multiple-choice questions, all scored (no unscored pretest items)
  • Time Limit 3 hours

Passing Score 75 -- NCCER reports a scaled score, not a raw percentage, so "75" is the cut score itself, not "75%"

Format Closed-book, proctored written assessment

Prerequisite Completion of NCCER Millwright training modules (typically delivered through an accredited training sponsor) or demonstrated equivalent field experience

  • Validity Does not expire -- the credential is recorded permanently on the NCCER National Registry
  • The Seven Content Domains

The assessment specification groups all 33 required training modules into seven content domains, each with its own official weight:

  • Millwright Fundamentals (19.2%, 24 items) -- hand/power tools, trade math, blueprint reading, precision layout
  • Bearings and Fasteners (8.0%, 10 items)
  • Packing, Seals and Gaskets (8.0%, 10 items)
  • Equipment Installation (14.4%, 18 items) -- baseplates, soleplates, rigging
  • Maintenance and Troubleshooting (20.8%, 26 items) -- the heaviest domain alongside Alignment

Alignment (20.8%, 26 items) -- dial-indicator methods, laser alignment, and (notably) compressor maintenance, which NCCER scores under this domain rather than under Maintenance and Troubleshooting

Hydraulics and Pneumatics (8.8%, 11 items)

Together, Maintenance/Troubleshooting and Alignment make up 41.6% of the exam -- more than 2 in 5 questions -- which is why this guide devotes its largest chapter blocks to those two domains.

One blueprint quirk worth knowing before test day: module 15406 (Compressors and Compressor Maintenance) is officially scored under the Alignment domain, not under Maintenance and Troubleshooting where its title might suggest. This guide follows NCCER's own scoring placement so your practice matches how the real exam is actually weighted.

Eligibility, Fees, and Retakes

There is no single national fee -- cost typically runs $150-300 and is set by whichever NCCER-accredited training sponsor or testing site administers your exam, not by NCCER centrally. Retake policies (waiting periods, retake fees) are likewise set by the individual training provider or testing site rather than by a single NCCER-wide rule, so confirm your specific retake terms with whoever is administering your exam.

After You Pass

A passing score adds the Millwright credential to your NCCER National Registry transcript, which employers and training sponsors can verify directly online. Because it never expires, there is no periodic renewal exam -- though many millwrights go on to pursue NCCER's Advanced Millwright curriculum or a related credential like the Certified Maintenance & Reliability Technician (CMRT) to keep building their qualifications.