Study guide

0.2 How to Use This Study Guide

NCCER Millwright Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction

0.1 About the NCCER Millwright Certification 0.2 How to Use This Study Guide

2 Chapter 1: Hand & Power Tools, Cutting

1.1 Millwright Hand Tools 1.2 Millwright Power Tools 1.3 Oxyfuel Cutting

3 Chapter 2: Trade Math, Blueprints & Precision Layout

2.1 Craft-Related Mathematics 2.2 Reading Mechanical Drawings 2.3 Basic Layout 2.4 Precision Measuring Tools

4 Chapter 3: Bearings & Fasteners

3.1 Fasteners and Anchors 3.2 Introduction to Bearings 3.3 Removing and Installing Bearings

5 Chapter 4: Packing, Seals & Gaskets

4.1 Gaskets and Packing 4.2 O-Rings and Non-Mechanical Seals 4.3 Mechanical Seals

6 Chapter 5: Installation Fundamentals — Baseplates, Soleplates & Rigging

5.1 Setting Baseplates and Soleplates 5.2 Rigging Practices

7 Chapter 6: Drives, Conveyors & Gearboxes

6.1 Installing Belt and Chain Drives 6.2 Introduction to Conveyors 6.3 Gearboxes

8 Chapter 7: Pumps, Lubrication & Pump Troubleshooting

7.1 Introduction to Pumps 7.2 Troubleshooting and Repairing Pumps 7.3 Lubrication

9 Chapter 8: Conveyor & Gearbox Troubleshooting, Preventive Maintenance

8.1 Troubleshooting and Repairing Conveyors 8.2 Troubleshooting and Repairing Gearboxes 8.3 Preventive and Predictive Maintenance

10 Chapter 9: Alignment Fundamentals & Dial Indicator Methods

9.1 Couplings and Alignment Fundamentals 9.2 Prealignment and Shim Fabrication 9.3 Dial Indicator Alignment

11 Chapter 10: Advanced Alignment, Laser Methods & Compressor Maintenance

10.1 Laser Alignment 10.2 Optical Layout and Alignment 10.3 Compressors and Compressor Maintenance

12 Chapter 11: Hydraulics & Pneumatics

11.1 Basic Pneumatic Systems 11.2 Basic Hydraulic Systems 11.3 Troubleshooting and Repairing Hydraulic Equipment

0.2 How to Use This Study Guide

Key Takeaways Explain This Topic AI

This guide's 11 chapters follow the AEN15MLWR05 module groupings in the order most training programs teach them.

Chapters 6-10 (Maintenance/Troubleshooting and Alignment) get the most depth because together they are 41.6% of the exam.

Every section ends with field-scenario and calculation-based quiz questions matching the real exam's applied style.

Pair this guide with the practice question bank and flashcards for problem-solving speed and quick-recall facts respectively.

Last updated: July 2026

Welcome to ExamFinch's free NCCER Millwright study guide! Here's how to get the most out of your preparation.

Guide Structure

This guide's 11 chapters are organized around the AEN15MLWR05 assessment's module groupings, sequenced the way most training programs teach them -- foundational tools and math first, then component-level systems (bearings, seals, installation), then the two heaviest topics (troubleshooting and alignment), and finally hydraulics/pneumatics:

  • Chapter 1: Hand & Power Tools, Cutting -- Millwright Fundamentals domain, part 1
  • Chapter 2: Trade Math, Blueprints & Precision Layout -- Millwright Fundamentals domain, part 2
  • Chapter 3: Bearings & Fasteners
  • Chapter 4: Packing, Seals & Gaskets
  • Chapter 5: Installation Fundamentals -- baseplates, soleplates, rigging
  • Chapter 6: Drives, Conveyors & Gearboxes
  • Chapter 7: Pumps, Lubrication & Pump Troubleshooting
  • Chapter 8: Conveyor & Gearbox Troubleshooting, Preventive Maintenance
  • Chapter 9: Alignment Fundamentals & Dial Indicator Methods

Chapter 10: Advanced Alignment, Laser Methods & Compressor Maintenance -- includes module 15406, scored under Alignment

  • Chapter 11: Hydraulics & Pneumatics
  • Study Features
  • Content Sections

Each section teaches to the real trade -- worked numeric examples (gear and sheave ratios, taper-per-foot calculations, sling-tension trigonometry, hydraulic force calculations), named tolerances, and OSHA references, not generic paraphrases of module titles.

Practice Quizzes

Every section ends with quiz questions built from realistic field scenarios and calculation problems, matching how the real exam tests applied trade knowledge rather than bare definitions.

Exam-Focused

Chapter depth roughly mirrors domain weight: Maintenance/Troubleshooting and Alignment (41.6% of the exam combined) receive the most sections, matching where the real exam concentrates its 125 questions.

Recommended Study Plan

Work through chapters in order -- alignment and troubleshooting chapters assume you already know the tools, math, and component names from earlier chapters

Take every quiz, and redo the calculation-based ones -- alignment, gear-ratio, and hydraulics questions on the real exam are computation-heavy, so speed and accuracy on worked numeric problems matters

Give Chapters 6-10 extra passes -- Maintenance/Troubleshooting and Alignment together are more than 2 in 5 questions

Pair this guide with the practice question bank and flashcards -- flashcards drive quick recall of tolerances and safety-factor numbers, while the practice bank builds exam-pace problem-solving speed

Ready to Start?

Use the sidebar to navigate to Chapter 1: Hand & Power Tools, Cutting and begin your Millwright exam preparation. Good luck!